Writing file scenario problem on XI / PI

Hello folks,
I have a regression on a simple XI scenario : File => XI => File (asynchronous).
It worked well last week but it doesnu2019t since monday : my return file isn't create on the shared directory (I re-check the target path and the directory rights on Windows but everybody have "total control").
In the Runtime Workbench (monitoring under web browser), I can see the sender communication channel reads the file with no problem but the receiver doesnu2019t seem to be called.
The messages monitoring in transaction SXMB_MONI shows that messages are well processed.
Does someone already have the same problem ? Any idea ?
Thanks in advance.
Regards,
Michael.

Hello Ravi,
Thanks for your response. The status I have : "To be delivered" but I don't know why it isn't "successfull".
If I choose the status filter "All Containing Errors", I have no entry ...
Regards,
Michael.

Similar Messages

File to file scenario problems

Hi all,
not so far ago I install XI and it was seems to me that I did all post installation steps.
But when I try to do <a href="https://wiki.sdn.sap.com/wiki/display/XI/FLAT%20FILE%20TO%20FLAT%20FILE">File to File scenario</a>, I receive error in audit log:
SOAPFault received from Integration Server. ErrorCode/Category: XIServer/IN_BIND_WRONG_ADPT; Params: File; AdditionalText: ; ApplicationFaultMessage: ; ErrorStack: Sender agreement found belongs to adapter File; however, current adapter is 'XI'
Transmitting the message to endpoint http://<xiserver>:8001/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Error during conversion of XI message.
(<xiserver> - name of my server)
Please help. Any ideas?
Maxim.

HI,
HTTP response code : 500 Internal Server Errors
Description: The server encountered an unexpected condition which prevented it from fulfilling the request.
Possible Tips: Have a look into SAP Notes 804124, 807000
From Notes :
The problem can be solved in most cases by forcing the XI self-registration to use fully qualified host names.
For XI Integration Builder, Integration Engine and Runtime Workbench, you accomplish this by entering fully qualified host names in the XI Exchange Profile, then initiating a new self-registration (restarting the J2EE engine).
For the Adapter Engine, the approach is different: Change the properties "SLD.selfregistration.httpPort", "SLD.selfregistration.httpsPort" and "SLD.selfregistration.hostName" of the J2EE service SAP XI AF CPA Cache. Enter the fully qualified host name under which the Adapter Engine can be reached from all relevant network domains. Do this in the Visual Administrator of the J2EE Engine. Then restart the applications "com.sap.aii.af.cpa.app" and "com.sap aii.af.app", or restart the complete J2EE engine. This triggers a new Adapter Engine self-registration.
Go in the Integration Server (IS) to transaction "SXI_CACHE -> Goto -> Adapter-Engine-Cache" and delete the old Adapter Engine cache entries. After that the cache is refreshed from SLD as soon as a new message in sent to the respective Adapter Engine.
Check: After restart, navigate in SLD through "Content Maintenance -> XIAdapter Framework" to your Adapter Engine. As part of the "associated instances" you find e.g. at "XI Adapter Service XIRA -> Associated Instances -> Port for XIRA of af.<SID>.<hostname>" the new URL with the fully qualified host name
Regards
Chilla..
Points rewarded if it id usefull..

EDI to FILE scenario Problem.

H,
I am working on EDI to FIle scenario. in PI 7.1
I am getting output as XML Format .
Present output.
<BEG01>00<BEG01>
<BEG02>02<BEG02>
<BEG03>01<BEG03>
But I need output as
000102.(No segment data)
How woulds i change this xml format into normal format.
Thanks,
Singh.

Hi ,
If you need normal format please use the file content conversion. Please find the below links which are helpful for you for knowing file content conversion both in sender and receiver side.
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem(keyfield problem)
/people/karthiknarayan.kesavan2/blog/2007/08/22/file-content-conversion-for-multi-hierarchical-structure
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
http://wiki.sdn.sap.com/wiki/display/XI/XI_File_Content
http://wiki.sdn.sap.com/wiki/display/XI/BasicFileAdapterContentConversion
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion(file content conversion at receiver side)
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
/people/karthiknarayan.kesavan2/blog/2007/08/22/file-content-conversion-for-multi-hierarchical-structure
http://wiki.sdn.sap.com/wiki/display/XI/BasicFileAdapterContentConversion(basic file adapter conversion)
http://wiki.sdn.sap.com/wiki/display/XI/XI_File_Content
http://wiki.sdn.sap.com/wiki/display/XI/TroubleshootingtheFile+Adapter
/people/sukumar.natarajan/blog/2007/06/12/content-conversion-in-sender-file-adapter--2-new-useful-parameters
help.sap.com
http://help.sap.com/saphelp_nw70/helpdata/en/0b/9a50465ccf84479e39a6d50c90fb3f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0b/9a50465ccf84479e39a6d50c90fb3f/frameset.htm
Regards,
Rama

IDOC to File scenario problem

Hello,
I configured this scenario:
R/3 4.6C (IDOC) -> XI -> XI File Adapter (IDOC-XML)
I am on SP Stack 10 (i386)
IDOC arrived to XI with success, but there is no file in out directory of File adapter. In Audit Log in Adapter Engine of XI I get errors:
1. Error Unable to find channel ID
2. Error Delivery of the message to the application using connection AFW failed, due to: Couldn't find delivery channel for message: bf6a8684-e3ac-9540-a055-c9156b6c4edb
After 3 retries message stuck in System Error.
Here is a detail log:
2005-03-03 08:50:57 Success The message was successfully received by the messaging system. Profile: XI URL: http://xi3:53700/MessagingSystem/receive/AFW/XI
2005-03-03 08:50:57 Success Using connection AFW. Trying to put the message into the receive queue.
2005-03-03 08:50:58 Success The message was successfully retrieved from the receive queue.
2005-03-03 08:50:58 Success The message status set to DLNG.
2005-03-03 08:50:58 Error Unable to find channel ID
2005-03-03 08:50:58 Error Delivery of the message to the application using connection AFW failed, due to: Couldn't find delivery channel for message: bf6a8684-e3ac-9540-a055-c9156b6c4edb.
2005-03-03 08:50:58 Success The asynchronous message was successfully scheduled to be delivered at Thu Mar 03 08:55:58 CET 2005.
2005-03-03 08:50:58 Success The message status set to WAIT.
2005-03-03 08:55:58 Success The message was successfully retrieved from the receive queue.
2005-03-03 08:55:58 Success The message status set to DLNG.
2005-03-03 08:55:58 Error Unable to find channel ID
2005-03-03 08:55:58 Error Delivery of the message to the application using connection AFW failed, due to: Couldn't find delivery channel for message: bf6a8684-e3ac-9540-a055-c9156b6c4edb.
2005-03-03 08:55:58 Success The asynchronous message was successfully scheduled to be delivered at Thu Mar 03 09:00:58 CET 2005.
2005-03-03 08:55:58 Success The message status set to WAIT.
2005-03-03 09:00:58 Success The message was successfully retrieved from the receive queue.
2005-03-03 09:00:58 Success The message status set to DLNG.
2005-03-03 09:00:58 Error Unable to find channel ID
2005-03-03 09:00:58 Error Delivery of the message to the application using connection AFW failed, due to: Couldn't find delivery channel for message: bf6a8684-e3ac-9540-a055-c9156b6c4edb.
2005-03-03 09:00:58 Success The asynchronous message was successfully scheduled to be delivered at Thu Mar 03 09:05:58 CET 2005.
2005-03-03 09:00:58 Success The message status set to WAIT.
2005-03-03 09:05:58 Success The message was successfully retrieved from the receive queue.
2005-03-03 09:05:58 Success The message status set to DLNG.
2005-03-03 09:05:58 Error Unable to find channel ID
2005-03-03 09:05:59 Error Delivery of the message to the application using connection AFW failed, due to: Couldn't find delivery channel for message: bf6a8684-e3ac-9540-a055-c9156b6c4edb.
2005-03-03 09:05:59 Error The message status set to NDLV.
Also I checked admin_adapter.txt file in \usr\sap\XI3\DVEBMGS37\j2ee\cluster\server0\log\services\com.sap.aii.adapter.file.svc directory:
2005-03-02 22:40:02 : File Adapter Administration Stopping Sequence Executed
No adapter configured
2005-03-02 22:44:07 : File Adapter Administration initialized
No adapter configured
But, I configured File Adapter in Integration Directory as Active, and also in SXI_CACHE is present:
Communication Channel File
Adapter Engine Type CA
Adapter Engine Name af.xi3.xi3
Adapter Name File
Adapter Namespace http://sap.com/xi/XI/System
Adapter Software Component 3B787A8035C111D6BBE0EFE50A1145A5
Message Protocol File
Message Protocol Vers. 3.0.0527
Transport Protocol File
Call Direction O
Where is a problem?.
BTW, I get a same problem with DEMO: Distributing Booking Order Data.

Hi,
Try make a CPACache refresh.
(Http://<host>:5<sysnr>00/CPACache/refresh?mode=full) use XIDIRUSER.
We had a similar error after SP10, (every thing seems active, but it wasn't). It was solved by doing the cache refresh.
Hope it's help you
Rolf

Mail 2 File scenario - problems with attachments in file receiver

Hi experts,
I want to receive PDF documents via email and send them thru file adapter. Now I have some trouble with the attachments. I have configured my mailsender as follows:
localejbs/AF_Modules/PayloadSwapBean    TRANSFORM
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean    mail
Modules:
TRANSFORM       swap.keyName   Content-Disposition
TRANSFORM     swap.keyName     Content-Description
TRANSFORM       swap.keyValue     MailAttachment-1
TRANSFORM       swap.keyValue     attachment;filename="MailAttachment-1.pdf"
Now what modules do I have to use in my file receiver when I want to write the PDF-attachment to my directory? I already tried a lot and referred to many blogs but nothing really worked. I only get my header information in the output file.
Any ideas?
Thanks in advance.
Best regards.
Oliver.

Hi
Check this blogs
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417700)ID1810608850DB10913328217115658435End?blog=/pub/wlg/1685
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417700)ID1810608850DB10913328217115658435End?blog=/pub/wlg/2849
Regards
Ramesh

FIle Content Conversion Problem in IDOC-XI-File Scenario

Dear All,
I am doing IDOC-XI-FILE scenario.
I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like %store_code%_%current_date%_sitemaster.xml , I have completed the dynamic generation successfully .
Now there is slight change in the requirement ,we have to suppress the current_date node of the xml content . i have tried to suppress the current_date using these DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut , But I am unable to suppress it Can some body provide me the details on this .
The output xml version generated by Reciever file adapter is as below :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
</ns0:MT_SITE_MASTER>
Plz provide me the code I have to write in the file content conversion .
Thanks in advance
Regards
Prabhat

If u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier. Then use the Suppress Logic for the Current Date.
So it will look like this-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
<CURR_DATE>
<CURRENT_DATE>20051105</CURRENT_DATE>
</CURR_DATE>
</ns0:MT_SITE_MASTER>
So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
CURR_DATE.fieldFixedLengths - 0
CURR_DATE.fixedLengthTooShortHanling - Cut
And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
Hope this solves ur problem.
Regards,
Moorthy

File to File scenario using Transport Protocol FTP Problem

Hi,
my scenario is a file to file scenario using Transport Protocol FTP
there are 3 systems involved
a. computer 1 ( My system-source)
b. computer 2 (XI server)
c. computer 3 (Target system)
I want XI to pick file from computer 1 and post it to computer 3
I am logging on to XI server from computer 1(thro SAP GUI),
Sender communication channel :
Transport protocol:FTP
Messsage protocol: file
In FTP connection Parameters:
Server: computer 1 IP address
port:21
User name and PW---> I have given computer 1 Username and password.
Connection mode: permanently
Transfer mode: Binary
Folder: C:\ftproot\output
filename : given
In Receiver Communication Channel
Transport protocol:FTP
Message protocol: file
In FTP connection Parameters:
Server: computer 3 IP address
port:21
User name and PW---> I have given computer 3 Username and password.
Connection mode: permanently
Transfer mode: Binary
Put File: Use Temporary File
Folder:
eccserver\saploc\tmp
filename scheme: given
When I activate the scenario file is not getting picked from the source
In Adapter Framework: Message says up and running No message processing now
How to check FTP server is up and running on computer 1 (source system)and Computer 2 (XI server)?
What could be the problem ?
Thanks
dushanth

Hi
Consider that I dont have FTP installed on my computer. According to this blog
/people/shabarish.vijayakumar/blog/2006/08/01/along-came-a-file-adapter-mr-ftp-and-rest-of-the-gang
I have configured.
In sender comm channel I have given Ipaddress of computer 1 (which has a file to be picked)
In Receiver Comm channel I have given IP address of computer 3 (in which file to be posted)
and computer 2 is the XI server
Computer 1 has FTP installed
1. XI server should have FTP installed or not ? IF yes is it FTP client or FTP server or Guild FTP (according to the blog is enough)
2. Computer 3 should have FTP installed or not ?
Please help me I am really confused.
Thanks
dushanth

Mapping problem in file to multiple file scenario

Hi all,
 i am doing a file to file scenario in which the occurence of target is 0 to 1 .I changed the occurence of the tatrget as 0 to 1 in message mapping.But after this change i am not getting my xml output .previously i was getting it but now in moni its showing message suceesfull but xml output is not generating its genrating only <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1 />
</ns0:Messages>.....In moni before message mapping i am getting all my xml input but after message mapping its not generating xml output .All other mapping is one to one...just i have to check if one structure occurs in input file then it has to generate the output file(even if i copy the input from moni to IR then its work there) .it was working when i had not changed the occurence as 0 to1...Please guide me to crack this problem.
Regards,
Saurabh

Hi Raj/Swarup,
 my input str is MT_ANALYSIS
 Recordset
 Rsetxt
 field1
 field2
 Rseche
 field1
 field2
output str is:MT_HEADER
 Header
 field1
 field2
MT_HEADER file(o/p) is created if Rsetxt occurs in inbound str
i used creatif & exist standard function to achieve it. It was creating the xml output when Rsetxt occurs ,but the problem was when it does not occurs it was throwing error as the occurence of MT_HEADER was bydefault 1,when i changed the occurence in message mapping to 0 to 1 then two extra structre messages
 message1 occured in my mapping and it was not genrating any output xml,that i checked in moni.I message mapping(test) it is working and creating the xml with the same input.I am totally confused with this strange problem.
Regards
Saurabh

Problem in idoc to file scenario

hi
while creating the idoc to file scenario i am facing few problems.
1) My design time objects are working fine. i have checked my message mapping, message interface etc.. (all design time objects are in active mode).
2) In ID, i have tested my configuration in test configuration, its working fine there as well (in ID i am using 2 business service one for sender, one for receiver)
3) i am using my ecc6 training server as my sender and using my XI server as receiver.
4) i am sending idoc from ecc6 and converting it to file in XI server and saving it in XI server itself(my receiver in this case).
my error:
i send my idoc from we19 transaction, and i see a error message stating
that 'RCVR_DETERMINATION.NO_RECEIVER_CASE_ASYNC'
my doubts.
1) while sending the idoc from ecc6, is it mandatory to give process code in partner profile ( that is, assign an outbound function module to push the created idoc to the mentioned destination).
2) also is it mandatory to have a partner profile on the receiver side( XI in this case) along with inbound process code.
3) in my receiver adapter ( file adatper in this case ) i have used NFS protocal. is it rite?
kindly help me with this issue.
regards
manoharan

>
manoj murugesan wrote:
> 1) while sending the idoc from ecc6, is it mandatory to give process code in partner profile ( that is, assign an outbound function module to push the created idoc to the mentioned destination).
>
> 2) also is it mandatory to have a partner profile on the receiver side( XI in this case) along with inbound process code.
>
> 3) in my receiver adapter ( file adatper in this case ) i have used NFS protocal. is it rite?
>
>
> kindly help me with this issue.
>
>
> regards
> manoharan
and to 1 & 2 ref. below,
Configuration steps required for posting idoc's(XI) -
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
ALE configuration for pushing idocs from SAP to XI -
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
3. NFS protocol is used to read/write files to the XI server itself. If you have to write to a local machine then use FTP

IDoc to File scenario Monitoring Problem

Hi,
I have a problem in monitoring. In my IDoc to file scenario the ftp server is not reachable (wrong ip) but still in sxmb_moni I get a successful processed message with acknowledgement system error.
Now, why dont I get an normal error in sxmb_moni?
Thanks in advance...

Hi,
>>Now, why dont I get an normal error in sxmb_moni?
Why because in MONI we generally get the Errors related to the Message Processing like mapping, and pipe line Services.
But the error which u got is related to the Receiver, so this we can find out in the Receiver File Adapter monitoring( CC monitoring)
MONI Shows the Errors those are related to the ABAP Satck means if any Errors occurs while going the process on ABAP Stack
But the error which u got is on Adapter Engine Process, so Definately the Error finding place is on Receiver CC monitoring
REgards
Seshagiri
Edited by: N V Seshagiri on Sep 26, 2008 1:17 PM

Problem IDOC to File scenario: No service for system SAPIDC, clnt in ID

in IDOC to File scenario, when IDOCis triggered from R/3 to XI, it gives error in SM58 transaction
"No service for system SAPIDC, client 800 in Integration Directory"

In a scenario, i have a BPM which has a transformation step which contains a mutimapping ...means 2 messages mapped to 1 messgaes, here in the mapping i m using an UDF and written code to extract the file name from dynamic configuration.....
the problem is ...the same BPM contains another transformation step which contains a message mapping (which is not multi mapping), and here the code (UDF) works to fetch the file name...
the code is all correct....and it looks like
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String sourceFileName = conf.get(key);
if (sourceFileName == null ){
sourceFileName = "ErrorFile.xml";}
return sourceFileName;

JCO problem in SOAP to file scenario

Hey guys
i m doin a SOAP to file scenario and getting a JCO error in moni,the status of my queue in SMQ2 is SYSFAIL,when i check the TCP/IP connection in SM59 i find error in two places
AI_DIRECTORY_JCOSERVER and AI_RUNTIME_JCOSERVER .when i test connection for both of them i get the followin error "Error opening and RFC connection".
is this error dues to some server problem of something wrong in my scenario.?
the SOAP adapter in RWB is green.
i tried to unlock and delete the queue in SMQ2 but when i execute my scenario again,it gets SYSFAIL error.
thanx
ahmad

Hi,
If you restart the J2ee engine, it will work.
But The error may because of many reasons
-Might be because of lots of messages are to be processed simultaneously.
-Increasing the number of processes in VisualAdmin (VisualAdmin>JCO RFC Provider>AI_RUNTIME_<SID>) and see if that helps.
-This SAP Note may help u -709140.
Hope this helps,
Regards,
Moorthy

Problem with file to file scenario........

Hi
I have done file to file scenario.... I have created all data types,message types and message interfaces in Integration Repository..... and i have created reciever determitaion,interface determination, sender aggrement and reciever aggrement....and comunication channels....
In Source CC i have given
10.7.1.201\soruce
In Target CC i have give
10.7.1.201\target
I have created one source directry for source file and target directory for destination file....
Finally i have created source xml file and placed in source directory but its not going to target directory.... pls help me....
Best Regards
Ravi Shankar B
Message was edited by:
RaviShankar B

You may need to extendthe trace file in the Java Adminsitration console to find the exact problem.
Log on J2EE Admin Console
Select Cluster
Select <SID>
Select Server
Select Services
Select Log Configurator
Select Locations tab
In Log Controller:
Root Location > Com > SAP > aii > Adapter > File
Change severity to Debug
Click Save and "Apply to all server nodes"
Run the interface again
Check in \usr\sap\<SID>\DVEBMGS00\j2ee\cluster\server0\log
for full trace file.
Best viewed in Log Viewer:
\usr\sap\<SID>\DVEBMGS00\j2ee\admin\logviewer-standalone\logviewer.bat (.sh)

Problem in File-File Scenario

Hi All,
I am doing File->File Scenarios. There is no Recrod set also. I want to rename the file using XI. No mapping required. To rename the File name we can do the coding related to Dynamica configuration in one UDF and will map to the top node of the target. But i don't have the mapping here, So How can i execture this UDF or Do i need to write the Module in File adapter CC.
I tried with dummy mapping , But I am getting the following error
</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE
</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_Target_File_determined_
</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException
</SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~
</SAP:P3>
<SAP:P4/>
<SAP:AdditionalText/>
<SAP:ApplicationFaultMessage namespace=""/>
<SAP:Stack>During the application mapping com/sap/xi/tf/_MM_Target_File_determined_ a com.sap.aii.utilxi.misc.api.BaseRu
ntimeException was thrown: Fatal Error: com.sap.engine.lib.xml.parser.Parser~
</SAP:Stack>
The mapping part is correct. There is no doubt on that. I don;t know why i am getting this error. Can you please tell me what could be the reason or any solution to resolve my problem.
Points will be rewarded for helpful answers.
Thanks in advance,
Best Regards,
Vijay

Bhaskarudu,
Option 1: If you only want to rename the file then pick the file and rename the file in receiver communicatin channel and write. Check this weblog for some help:
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
Option 2: If you want to rename the file dynamically then you should do the mapping. Check this weblog for this:
/people/sravya.talanki2/blog/2005/08/16/configuring-generic-sender-file-cc-adapter
Option 3: If you are picking the file within your organisation which is shared on NFS then you use OS commands in the file adapterd to rename the file.
Regards,
---Satish

Problem with File RFC File scenario without using BPM

Hi all,
I am trying a File RFC File scenario without using BPM with the help of the following thread:
File - RFC - File without a BPM - Possible from SP 19.
The XI system is PI 7.0 sp 12. When I am trying to acheive the above scenario, I am getting wierd results i.e., when I observe in SXI_MONITOR, the message is showing as processed successfully, but when I watch the message status in communication channel monitoring, I am getting the following error:
"Attempt to process file failed with com.sap.aii.af.service.cpa.CPAException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=DEV120;TS=Test_Service;AN=MI_Invoice;ANS=urn:sap.com:test;"
I am not able to understand what the problem is. By the way, one more thing, is, I have kept the File processing mode as "Delete" in the sender file adapter. But the file is not getting deleted. I think the reason could be because of the above error.
Can any body help me out in getting my problem resolved?
Thanks,
Adithya K

CPA Cache Refresh from the Adapter Engine To trigger a cache refresh from the individual Adapter Framework, open a browser window and enter the following
URL: http://<host>:<port>/CPACache/refresh?mode=delta|full
The Monitoring url is like this: http://<host>:<port>/CPACache
Thanks & Regards,
Farooq.

Writing file scenario problem on XI / PI

Similar Messages

Maybe you are looking for