Writing the code in formula..

Hi,
Could you please help me in how to writhe the following code in the "formula" of rule type in transformation?
If sy-datum+4(2) < '06'. "Loading Kami (Apr - Sept)
concatenate l_year '0421' into l_month1.
I know that i can write this in start routine and will be able to fetch the data. But I want to implement this through transformation.
I dunno how to use formula and write in there..
Regards,
Geeta Reddy.

hi,
job no mblno carrier vsl voy lport dport
111 2000 misc hanjin 12E sl UK
misc hanjin 12E sl UK
job no & mbol no is one group
remainings values another group.
carrier , vsl , voy , lport,dport these values fetches from the column of JOB_DESC
data's strored in the table like this:
jobparent Job desc jobserial
1 misc 1
1 hanjin 2
1 12E 3
1 sl 4
1 UK 5
2 misc 1
2 hanjin 2
2 12E 3
2 sl 4
2 UK 5
i am writing the formula column in the datamodel of second group.
if jobserial = 1 then print the value of Misc in carrier , job_serial=2 then print the value of Hanjin into vsl column.
i need to avoid the duplicate value :
job no mblno carrier vsl voy lport dport
111 2000 misc hanjin 12E sl UK
misc hanjin 12E sl UK -- This line not required
suppose carrier,voy or any one value is different then i need to print all the data
job no mblno carrier vsl voy lport dport
111 2000 misc hanjin 12E sl UK
ABCc hanjin 34D sl UK

Similar Messages

Need help in writing the code

Hi,
My table data is as below.
Kunnr BDAT EDAT D1 D2 D3 D4 D5
1111    2001 2002   1      2    1      2     1
1111    2003 2008   1      0    4     1      2
1111    2008 2011   1      1    1     1      1
2222    2003 2008   1      2    2             2
2222    2008 2011           1    2     1      1
Here for kunnr between begin and end date we have to caluclate the dependencies. (I.e if there is any value in D1or D2 or D3orD4 it shoulbe counted as 1. of it is zero or blank then it should not be coutned).
for Ex: for 1111 between 2001 & 2002 tot dependencies are 5.
           for 1111 between 2003 & 2008 tot dependencies are 4.
in this scenario what will be the best way of writing the code. Do we need to check each and every field when counting the Sum value or and simple way to improve the performance.
Regards,
Vishnu
Edited by: Vishnuvadhan K on May 13, 2011 10:30 AM
Moderator Message: This is not a forum, where you can get your work done by others.
Edited by: kishan P on May 13, 2011 3:52 PM

Hi Vishnu,
Here, you will have to check for the range of your begin date & end date. If it comes in the said range, then you simply have to add the values of your D1, D2,... DX values which you can store in some variables by setting out a flag as one counter for each.
If your case is satisfied for any of the date range, then just check for the flag values which are satisfied & add them or display the sum of the number of counters.
@Ambujavalli, At End Of won't work here because the date ranges given by Vishnu will differ.
Those statements are useful in a case when suppose for the same field value, you need to calculate a particular sum.
Here, that is not the case. Hence, AT First & At End Of won't work.
Thanks,
Gayathri.
Edited by: gnikesh88 on May 13, 2011 11:52 AM

Writing web code on a Mac???? And FTP Programs?

Alright, so bear with me on this one. I've been using mac's for years for my graphic design and graphic pieces of my web sites, but I still use my PC to write the code (HTML, JavaScript, CSS, mostly) that the sites run on. I write it, in true old-fashioned sense, in Notepad.
However, now my overglorified word processor (PC) is being totally, ridiculously, slow and acting weird... I think it did this before my last Blue Screen of Death, so luckily I've backed up everything important. Anyway, I thought I'd give writing code on the Mac (a gorgeous 20" imac, in all its wondrous glory) a shot. Here's what I've done:
- Open TextEdit, type in a few lines of test code.
- Save As : select HTML as the file type, with a file name of "Test" or something.
- Open the file in Safari, expecting to see a real, webpage. Instead? I see my code. Black text, white background, flaunting every little
and tag like a defiant child smearing raspberry jam all over my couch.
I just can't switch to a WYSIWYG editor and lose the (tyrannical) control I've had over my web pages from writing the code in notepad. So what should I be doing to write code on a mac? I need to know soon, since my PC will be exploding any day now. Any help would be GREATLY appreciated.
P.S. I'd prefer not to have to spend any money to purchase a text editor for web code. Am I being cheap? I don't really know. But if I can use a program that's already on my mac, I'm all for it.
P.P.S. Also, I've been uploading code/images/etc. to my hosts via the WinSCP FTP software, on a PC. Can anyone recommend good FTP software for OSX (10.4.10).

Both of iFelix's suggestions are great free apps and I would recommend them also.
If you don't mind shelling out some money for the apps (after a trial of course), I myself use Panic's Coda (http://www.panic.com/coda/) for coding. A lot of people also prefer apps like TextMate (http://macromates.com/).
CSSEdit (http://macrabbit.com/cssedit/) is a really nice combination of a WYSIWYG and source editior strictly for CSS also (Coda has this sort of functionality built in also).
As far as FTP, if you arent happy with the free options, Panic makes an app called Transmit (http://www.panic.com/transmit/) that is excellent, and is also basically built into Coda.
Message was edited by: shadeDream

Problem in triggering the code for CO02 User Exit

Hi,
I am using the code for the Tcode CO02 (User Exit) and i am facing a problem that when i am using the code as a normal program it is executing fine and displaying the pop up window and showing the data in it.
But when i am using that code in the USER EXIT code it is not trigerring that pop up window.
I am using the enhancement:-
*PPCO0007 * - Exit when saving production order
And the include in which i am writing the code is :-
INCLUDE ZXCO1U06
plzz provide me guidelines for solving this problem.

hi ,
i am using the following: -
Enhancement No. -> PPCO0007 (Exit when saving production order)
When i click on the enhancement the following is displayed:-
Function exit -> *EXIT_SAPLCOZV_001 *
When i double click the function exit the code i had written in the following include:-
INCLUDE ZXCO1U06
plzz tell me whether i am doing it right or worng?

PLEASE HELP ME TO MODIFY THE CODE !

DATA:BEGIN OF I_PARTNER OCCURS 0,
       VBELN LIKE VBPA-VBELN,
       adrnr like vbpa-adrnr,
       kunnr LIKE vbpa-kunnr,
       PARVW LIKE VBPA-PARVW,
       post_code1 LIKE adrc-post_code1,
       po_box LIKE adrc-po_box,
       name1 LIKE adrc-name1,
       name2 LIKE adrc-name2,
       city1 LIKE adrc-city1,
       city2 LIKE adrc-city2,
       country LIKE adrc-country,
       street LIKE adrc-street,
       str_suppl1 LIKE adrc-str_suppl1,
       str_suppl2 LIKE adrc-str_suppl2,
       str_suppl3 LIKE adrc-str_suppl3,
       vtext like tpart-vtext,
       ADRNP LIKE VBPA-ADRNP,
      SMTP_ADDR LIKE ADR6-SMTP_ADDR,
     END OF I_PARTNER.
SELECT
VBPA~VBELN
vbpa~adrnr
VBPA~PARVW
VBPA~KUNNR
VBPA~ADRNP
TPART~VTEXT
FROM VBPA AS VBPA
INNER JOIN TPART AS TPART
ON VBPAPARVW EQ TPARTPARVW
AND SPRAS = SY-LANGU
INTO CORRESPONDING FIELDS OF TABLE I_PARTNER
WHERE
VBPA~VBELN EQ S_VBELN.
WRITE:/
i_partner-adrnr         under         'ADDRESS NUMBER',
i_partner-vbeln         UNDER         'Order-No',
i_partner-parvw         UNDER         'Partner-Type',
I_PARTNER-VTEXT         UNDER         'Partner-Type description',
I_PARTNER-KUNNR         UNDER         'Partner-no'.
ULINE.
endloop.
HERE I AM GETTING ALL THE POSSIBLE PARTNER TYPES.
I WANT TO GET THE OUT PUT ONLY WHEN THE PARTNER TYPE S ARE 'SP' 'BP' AND 'SH'.
PLEASE HELP.....

Hi,
Both the answers are correct... iam just writing the code u needed..
ranges : gr_partner for tablename-fieldname.
initialization.
gr_partner-sign = 'I'.
gr_partner-option = 'EQ'
gr_partner-low = 'SP'
append gr_partner.
gr_partner-sign = 'I'.
gr_partner-option = 'EQ'
gr_partner-low = 'BP'
append gr_partner.
gr_partner-sign = 'I'.
gr_partner-option = 'EQ'
gr_partner-low = 'SH'
append gr_partner.
SELECT
VBPA~VBELN
vbpa~adrnr
VBPA~PARVW
VBPA~KUNNR
VBPA~ADRNP
TPART~VTEXT
FROM VBPA AS VBPA
INNER JOIN TPART AS TPART
ON VBPAPARVW EQ TPARTPARVW
AND SPRAS = SY-LANGU
INTO CORRESPONDING FIELDS OF TABLE I_PARTNER
WHERE
VBPA~VBELN EQ S_VBELN
and vbpa~parvw in gr_partner.
Regards,
Nagaraj

To avoid writing database code in the front end

Hello,
I am working on a database application using 10g database as backend and dotnet as front end. I wish to execute only oracle stored procedure for all the select (to avoid hard parse and use of bind variable), DDL and DML operations; just to avoid writing database code in the front end. Can anyone please give me a little examples of :
1.Select query's output to be return as resultset by stored procedure.
2.DML example by stored procedure.
3.Any DDL example by stored procedure.
using scott.emp, so that i would just call the stored procedure, rather than giving select,DML and/or DDL commands in the front end. Even though i have read in the documentation, but a clear cut examples will help me to get into clear concept as well.
Thanks & Regards
Girish Sharma

Hi...
-->Select example
create or replace procedure get_emp(rc out sys_refcursor)
is
begin
open rc for select * from emp;
end;
-->DML example
create or replace procedure do_dml_emp(pempid in number,
pempname varchar2,
result out number)
is
begin
insert into emp(empid,empname) values(pempid,pempname) returning empid into result;
exception
when others then
result:=-1;
end;
-->DDL example
create or replace procedure ddl_emp(colname varchar2,
coltype varchar2,
result out number)
is
begin
result:=-1;
execute immediate 'alter table emp add column ' || colname || ' ' || coltype ;
result:=1;
end;

Hello friends , I have started with writing c code on mac using xcode .....but one of my friend told me to use gcc for coding. He started with terminal And used a text editor to compil the c program on his mac.. So please tell me how to do the same

Hello friends , I have started with writing c code on mac using xcode .....but one of my friend told me to use gcc for coding. He started with terminal And used a text editor to compil the c program on his mac.. So please tell me how to do the same and is there any pre stalled text editor on mac if yes then where and if no then which text editor to install and how to install gcc...please help me out thanks in advance !!!

I have started with writing c code on mac using xcode .....but one of my friend told me to use gcc for coding.
Why? If you are developing and writing code on a Mac why would you not use the tools Apple has given you? And Xcode, once you get use to it, is a very nice development environment that will make you life a whole lot easier.
If you insist on using an editor and the terminal I would recommend Emacs but it has a long learning curve so something like TextWrangler will work too.
As for the compiler if you have Xcode installed install the command line tools and you will be able to compile from the terminal.
good luck

URGENT check the code for vendor ageing (Give Solution)

hi this is the code which i am using to calculate the
ageing but not able to get the result.
every time the result is 0.plz suggest me the solution.
its very urgent.
*& Report Z_VENDOR AGEING                                                    *
*& in this repoet I am calculating the vendor ageing
    which is depending on formula
    AGEING = Current Date(or any date entered by user) Bline Date(BSIK-zfbdt)
REPORT z_vendor NO STANDARD PAGE HEADING
                  LINE-SIZE 200
                  LINE-COUNT 65(3).
TABLES : bsik.
DATA : BEGIN OF t_out OCCURS 0,
       bukrs LIKE bsik-bukrs,
       saknr LIKE bsik-saknr,
       bldat LIKE bsik-bldat,
       wrbtr LIKE bsik-wrbtr,
       lifnr LIKE bsik-lifnr,
       zfbdt like bsik-zfbdt,
       ageing type i,
       END OF t_out.
parameters : p_date1 type d.
SELECT-OPTIONS : s_bukrs FOR bsik-bukrs,
                 s_saknr FOR bsik-saknr,
                 s_lifnr FOR bsik-lifnr.
SELECT bukrs saknr bldat wrbtr lifnr zfbdt
       FROM bsik
       INTO TABLE t_out
       WHERE saknr IN s_saknr
       AND bukrs IN s_bukrs
       AND lifnr IN s_lifnr.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
EXPORTING
    i_datum_bis                   = p_date1
    i_datum_von                   = t_out-zfbdt
I_KZ_EXCL_VON                 = '0'
I_KZ_INCL_BIS                 = '0'
I_KZ_ULT_BIS                  = ' '
I_KZ_ULT_VON                  = ' '
I_STGMETH                     = '0'
I_SZBMETH                     = '1'
IMPORTING
   E_TAGE                        = t_out-ageing
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED       = 1
OTHERS                        = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT t_out.
WRITE : / t_out-saknr,
            t_out-lifnr,
            t_out-wrbtr,
            t_out-zfbdt,
            t_out-ageing.
ENDLOOP.

hi sanjeev,
still problem there.
dont worry. just copy this code.
try this code.
TABLES : bsik.
DATA : BEGIN OF t_out OCCURS 0,
bukrs LIKE bsik-bukrs,
saknr LIKE bsik-saknr,
bldat LIKE bsik-bldat,
wrbtr LIKE bsik-wrbtr,
lifnr LIKE bsik-lifnr,
zfbdt like bsik-zfbdt,
ageing type i,
END OF t_out.
parameters : p_date1 type d.
SELECT-OPTIONS : s_bukrs FOR bsik-bukrs,
s_saknr FOR bsik-saknr,
s_lifnr FOR bsik-lifnr.
SELECT bukrs saknr bldat wrbtr lifnr zfbdt
FROM bsik
INTO <b>corresponding fields of</b> TABLE t_out
WHERE saknr IN s_saknr
AND bukrs IN s_bukrs
AND lifnr IN s_lifnr.
<b>loop at t_out.</b>
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
EXPORTING
i_datum_bis = p_date1
i_datum_von = t_out-zfbdt
I_KZ_EXCL_VON = '0'
I_KZ_INCL_BIS = '0'
I_KZ_ULT_BIS = ' '
I_KZ_ULT_VON = ' '
I_STGMETH = '0'
I_SZBMETH = '1'
IMPORTING
E_TAGE = t_out-ageing
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
<b>modify t_out.</b>
clear t_out.
<b>endloop.</b>
LOOP AT t_out.
WRITE : / t_out-saknr,
t_out-lifnr,
t_out-wrbtr,
t_out-zfbdt,
t_out-ageing.
endloop
rgds
anver
Message was edited by: Anversha s

Error while writing the data into the file . can u please help in this.

The following error i am getting while writing the data into the file.
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>null</code>
</part>
<part name="summary">
<summary>file:/C:/oracle/OraBPELPM_1/integration/orabpel/domains/default/tmp/
.bpel_MainDispatchProcess_1.0.jar/IntermediateOutputFile.wsdl
[ Write_ptt::Write(Root-Element) ] - WSIF JCA Execute of operation
'Write' failed due to: Error in opening
file for writing. Cannot open file:
C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\
BPEL_Import_with_Dynamic_Transformation\WORKDIRS\SampleImportProcess1\input for writing. ;
nested exception is: ORABPEL-11058 Error in opening file for writing.
Cannot open file: C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\
BPEL_Import_with_Dynamic_Transformation
\WORKDIRS\SampleImportProcess1\input for writing. Please ensure 1.
Specified output Dir has write permission 2.
Output filename has not exceeded the max chararters allowed by the
OS and 3. Local File System has enough space
.</summary>
</part>
<part name="detail">
<detail>null</detail>
</part>
</bindingFault>

Hi there,
Have you verified the suggestions in the error message?
Cannot open file: C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\BPEL_Import_with_Dynamic_Transformation\WORKDIRS\SampleImportProcess1\input for writing.
Please ensure
1. Specified output Dir has write permission
2. Output filename has not exceeded the max chararters allowed by the OS and
3. Local File System has enough space
I am also curious why you are writing to a directory with the name "..\SampleImportProcess1\input" ?

Writing java code in JSP

Hi All
I dont know which one of the following is more effective in JSP
writing java code like <% out.println("Hellooo "); %>
OR
writing like <%="hello" %>
I shall be very much thankful to all those who spare their valuable time to clarify my doubt. I hope my question is not a stupid one.
Thanks
Elisha

when both gives the same out put, why there are two for the same out put?Because it is easier to do this:
Hello <%= userName %>
than this:
Hello <% out.println("userName"); %>
Also there is a BIG difference in readability and maintainability of the JSP page. JSP pages are all about having html, and a few "fill in the blank" spots. The less <% scriptlet code %> you put on your JSP page, the better. If you want to run java code, do it in a servlet/bean.
With the advent of JSTL, scriptlet code in JSPs should be a thing of the past.

Problem while executing the code( that covert jpeg images to movie)

http://java.sun.com/products/java-media/jmf/2.1.1/solutions/JpegImagesToMovie.html
here is the code:
* @(#)JpegImagesToMovie.java     1.3 01/03/13
* Copyright (c) 1999-2001 Sun Microsystems, Inc. All Rights Reserved.
* Sun grants you ("Licensee") a non-exclusive, royalty free, license to use,
* modify and redistribute this software in source and binary code form,
* provided that i) this copyright notice and license appear on all copies of
* the software; and ii) Licensee does not utilize the software in a manner
* which is disparaging to Sun.
* This software is provided "AS IS," without a warranty of any kind. ALL
* EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY
* IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
* NON-INFRINGEMENT, ARE HEREBY EXCLUDED. SUN AND ITS LICENSORS SHALL NOT BE
* LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
* OR DISTRIBUTING THE SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL SUN OR ITS
* LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT,
* INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER
* CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF
* OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
* This software is not designed or intended for use in on-line control of
* aircraft, air traffic, aircraft navigation or aircraft communications; or in
* the design, construction, operation or maintenance of any nuclear
* facility. Licensee represents and warrants that it will not use or
* redistribute the Software for such purposes.
import java.io.*;
import java.util.*;
import java.awt.Dimension;
import javax.media.*;
import javax.media.control.*;
import javax.media.protocol.*;
import javax.media.protocol.DataSource;
import javax.media.datasink.*;
import javax.media.format.VideoFormat;
* This program takes a list of JPEG image files and convert them into
* a QuickTime movie.
public class JpegImagesToMovie3 implements ControllerListener, DataSinkListener {
public boolean doIt(int width, int height, int frameRate, Vector inFiles, MediaLocator outML) {
     ImageDataSource ids = new ImageDataSource(width, height, frameRate, inFiles);
     Processor p;
     try {
     System.err.println("- create processor for the image datasource ...");
     p = Manager.createProcessor(ids);
     } catch (Exception e) {
     System.err.println("Yikes! Cannot create a processor from the data source.");
     return false;
     p.addControllerListener(this);
     // Put the Processor into configured state so we can set
     // some processing options on the processor.
     p.configure();
     if (!waitForState(p, p.Configured)) {
     System.err.println("Failed to configure the processor.");
     return false;
     // Set the output content descriptor to QuickTime.
     p.setContentDescriptor(new ContentDescriptor(FileTypeDescriptor.QUICKTIME));
     // Query for the processor for supported formats.
     // Then set it on the processor.
     TrackControl tcs[] = p.getTrackControls();
     Format f[] = tcs[0].getSupportedFormats();
     if (f == null || f.length <= 0) {
     System.err.println("The mux does not support the input format: " + tcs[0].getFormat());
     return false;
     tcs[0].setFormat(f[0]);
     System.err.println("Setting the track format to: " + f[0]);
     // We are done with programming the processor. Let's just
     // realize it.
     p.realize();
     if (!waitForState(p, p.Realized)) {
     System.err.println("Failed to realize the processor.");
     return false;
     // Now, we'll need to create a DataSink.
     DataSink dsink;
     if ((dsink = createDataSink(p, outML)) == null) {
     System.err.println("Failed to create a DataSink for the given output MediaLocator: " + outML);
     return false;
     dsink.addDataSinkListener(this);
     fileDone = false;
     System.err.println("start processing...");
     // OK, we can now start the actual transcoding.
     try {
     p.start();
     dsink.start();
     } catch (IOException e) {
     System.err.println("IO error during processing");
     return false;
     // Wait for EndOfStream event.
     waitForFileDone();
     // Cleanup.
     try {
     dsink.close();
     } catch (Exception e) {}
     p.removeControllerListener(this);
     System.err.println("...done processing.");
     return true;
* Create the DataSink.
DataSink createDataSink(Processor p, MediaLocator outML) {
     DataSource ds;
     if ((ds = p.getDataOutput()) == null) {
     System.err.println("Something is really wrong: the processor does not have an output DataSource");
     return null;
     DataSink dsink;
     try {
     System.err.println("- create DataSink for: " + outML);
     dsink = Manager.createDataSink(ds, outML);
     dsink.open();
     } catch (Exception e) {
     System.err.println("Cannot create the DataSink: " + e);
     return null;
     return dsink;
Object waitSync = new Object();
boolean stateTransitionOK = true;
* Block until the processor has transitioned to the given state.
* Return false if the transition failed.
boolean waitForState(Processor p, int state) {
     synchronized (waitSync) {
     try {
          while (p.getState() < state && stateTransitionOK)
          waitSync.wait();
     } catch (Exception e) {}
     return stateTransitionOK;
* Controller Listener.
public void controllerUpdate(ControllerEvent evt) {
     if (evt instanceof ConfigureCompleteEvent ||
     evt instanceof RealizeCompleteEvent ||
     evt instanceof PrefetchCompleteEvent) {
     synchronized (waitSync) {
          stateTransitionOK = true;
          waitSync.notifyAll();
     } else if (evt instanceof ResourceUnavailableEvent) {
     synchronized (waitSync) {
          stateTransitionOK = false;
          waitSync.notifyAll();
     } else if (evt instanceof EndOfMediaEvent) {
     evt.getSourceController().stop();
     evt.getSourceController().close();
Object waitFileSync = new Object();
boolean fileDone = false;
boolean fileSuccess = true;
* Block until file writing is done.
boolean waitForFileDone() {
     synchronized (waitFileSync) {
     try {
          while (!fileDone)
          waitFileSync.wait();
     } catch (Exception e) {}
     return fileSuccess;
* Event handler for the file writer.
public void dataSinkUpdate(DataSinkEvent evt) {
     if (evt instanceof EndOfStreamEvent) {
     synchronized (waitFileSync) {
          fileDone = true;
          waitFileSync.notifyAll();
     } else if (evt instanceof DataSinkErrorEvent) {
     synchronized (waitFileSync) {
          fileDone = true;
          fileSuccess = false;
          waitFileSync.notifyAll();
public static void main(String args[]) {
     if (args.length == 0)
     prUsage();
     // Parse the arguments.
     int i = 0;
     int width = -1, height = -1, frameRate = 1;
     Vector inputFiles = new Vector();
     String outputURL = null;
     while (i < args.length) {
     if (args.equals("-w")) {
          i++;
          if (i >= args.length)
          prUsage();
          width = new Integer(args[i]).intValue();
     } else if (args[i].equals("-h")) {
          i++;
          if (i >= args.length)
          prUsage();
          height = new Integer(args[i]).intValue();
     } else if (args[i].equals("-f")) {
          i++;
          if (i >= args.length)
          prUsage();
          frameRate = new Integer(args[i]).intValue();
     } else if (args[i].equals("-o")) {
          i++;
          if (i >= args.length)
          prUsage();
          outputURL = args[i];
     } else {
          inputFiles.addElement(args[i]);
     i++;
     if (outputURL == null || inputFiles.size() == 0)
     prUsage();
     // Check for output file extension.
     if (!outputURL.endsWith(".mov") && !outputURL.endsWith(".MOV")) {
     System.err.println("The output file extension should end with a .mov extension");
     prUsage();
     if (width < 0 || height < 0) {
     System.err.println("Please specify the correct image size.");
     prUsage();
     // Check the frame rate.
     if (frameRate < 1)
     frameRate = 1;
     // Generate the output media locators.
     MediaLocator oml;
     if ((oml = createMediaLocator(outputURL)) == null) {
     System.err.println("Cannot build media locator from: " + outputURL);
     System.exit(0);
     JpegImagesToMovie3 imageToMovie3 = new JpegImagesToMovie3();
     imageToMovie3.doIt(width, height, frameRate, inputFiles, oml);
     System.exit(0);
static void prUsage() {
     System.err.println("Usage: java JpegImagesToMovie -w <width> -h <height> -f <frame rate> -o <output URL> <input JPEG file 1> <input JPEG file 2> ...");
     System.exit(-1);
* Create a media locator from the given string.
static MediaLocator createMediaLocator(String url) {
     MediaLocator ml;
     if (url.indexOf(":") > 0 && (ml = new MediaLocator(url)) != null)
     return ml;
     if (url.startsWith(File.separator)) {
     if ((ml = new MediaLocator("file:" + url)) != null)
          return ml;
     } else {
     String file = "file:" + System.getProperty("user.dir") + File.separator + url;
     if ((ml = new MediaLocator(file)) != null)
          return ml;
     return null;
// Inner classes.
* A DataSource to read from a list of JPEG image files and
* turn that into a stream of JMF buffers.
* The DataSource is not seekable or positionable.
class ImageDataSource extends PullBufferDataSource {
     ImageSourceStream streams[];
     ImageDataSource(int width, int height, int frameRate, Vector images) {
     streams = new ImageSourceStream[1];
     streams[0] = new ImageSourceStream(width, height, frameRate, images);
     public void setLocator(MediaLocator source) {
     public MediaLocator getLocator() {
     return null;
     * Content type is of RAW since we are sending buffers of video
     * frames without a container format.
     public String getContentType() {
     return ContentDescriptor.RAW;
     public void connect() {
     public void disconnect() {
     public void start() {
     public void stop() {
     * Return the ImageSourceStreams.
     public PullBufferStream[] getStreams() {
     return streams;
     * We could have derived the duration from the number of
     * frames and frame rate. But for the purpose of this program,
     * it's not necessary.
     public Time getDuration() {
     return DURATION_UNKNOWN;
     public Object[] getControls() {
     return new Object[0];
     public Object getControl(String type) {
     return null;
* The source stream to go along with ImageDataSource.
class ImageSourceStream implements PullBufferStream {
     Vector images;
     int width, height;
     VideoFormat format;
     int nextImage = 0;     // index of the next image to be read.
     boolean ended = false;
     public ImageSourceStream(int width, int height, int frameRate, Vector images) {
     this.width = width;
     this.height = height;
     this.images = images;
     format = new VideoFormat(VideoFormat.JPEG,
                    new Dimension(width, height),
                    Format.NOT_SPECIFIED,
                    Format.byteArray,
                    (float)frameRate);
     * We should never need to block assuming data are read from files.
     public boolean willReadBlock() {
     return false;
     * This is called from the Processor to read a frame worth
     * of video data.
     public void read(Buffer buf) throws IOException {
     // Check if we've finished all the frames.
     if (nextImage >= images.size()) {
          // We are done. Set EndOfMedia.
          System.err.println("Done reading all images.");
          buf.setEOM(true);
          buf.setOffset(0);
          buf.setLength(0);
          ended = true;
          return;
     String imageFile = (String)images.elementAt(nextImage);
     nextImage++;
     System.err.println(" - reading image file: " + imageFile);
     // Open a random access file for the next image.
     RandomAccessFile raFile;
     raFile = new RandomAccessFile(imageFile, "r");
     byte data[] = null;
     // Check the input buffer type & size.
     if (buf.getData() instanceof byte[])
          data = (byte[])buf.getData();
     // Check to see the given buffer is big enough for the frame.
     if (data == null || data.length < raFile.length()) {
          data = new byte[(int)raFile.length()];
          buf.setData(data);
     // Read the entire JPEG image from the file.
     raFile.readFully(data, 0, (int)raFile.length());
     System.err.println(" read " + raFile.length() + " bytes.");
     buf.setOffset(0);
     buf.setLength((int)raFile.length());
     buf.setFormat(format);
     buf.setFlags(buf.getFlags() | buf.FLAG_KEY_FRAME);
     // Close the random access file.
     raFile.close();
     * Return the format of each video frame. That will be JPEG.
     public Format getFormat() {
     return format;
     public ContentDescriptor getContentDescriptor() {
     return new ContentDescriptor(ContentDescriptor.RAW);
     public long getContentLength() {
     return 0;
     public boolean endOfStream() {
     return ended;
     public Object[] getControls() {
     return new Object[0];
     public Object getControl(String type) {
     return null;
on executing with the command:
java JpegImagesToMovie -w <width> -h <height> -f <frame rate per sec.> -o <output URL> <input JPEG file 1> <input JPEG file 2> ...
comes this......
Exception in thread"JMF thread:SendEventQueue:com.sun.media.processor.unknown Handler" java.lang.NullPointerException"
plz help

Don't forget to use the "Code Formatting Tags",
see http://forum.java.sun.com/help.jspa?sec=formatting,
so the posted code retains its original formatting.

Urgent : Doubt in writing a code in start routine

Hi all ,
             I am BI 7.0 system , I have doubt in writing a code in start routine .
1) i have to extract the data first from a custom table based on one condition and then placing it into internal table .
2) Now i have to loop at source_package for a particular region field say "ASIA". with this result i have to check for the correponding entries in custoom table .
   if condition is not true (i.e ) with entries or not matching then delete that particular record from source_package.
i have written a small logic for this . but this is producing any ouput , Please check it and also let me know for modifications .
thanks in advance.
select * from zcsp
    into corresponding fields of TABLE itab_T
    where
    ZBUSINESSUNIT = 'BC'.
loop at SOURCE_PACKAGE into ls_SOURCE_PACKAGE where /BIC/DPREGION = 'XE'.
             loop at itab_t into itab_w where zcategory =
               ls_source_package-/BIC/DPMAT/BIC/DPCAT.
                   if sy-subrc ne 0.
                     delete SOURCE_PACKAGE.
                   endif.
           endloop.
       endloop.

You're deleting the entire input package. You only want to delete the one row.
DATA: g_tabix TYPE sy-tabix.
SELECT * FROM zscp
INTO CORRESPONDING FIELDS OF TABLE itab_t
WHERE zbusinessunit = 'BC'.
SORT itab_t BY zcategory.
LOOP AT source_package INTO ls_source_package WHERE /bic/dpregion = 'XE'.
g_tabix = sy-tabix.
READ TABLE itab_t WITH KEY zcategory = ls_source_package-/bic/dpmat/bic/dpcat TRANSPORTING NO FIELDS BINARY SEARCH.
IF sy-subrc NE 0.
    DELETE source_package INDEX g_tabix.
ENDIF.
ENDLOOP.

Not able save the mapping after writing the 4th UDF (in PI 7.1)

Hi All,
After writing the 4th UDF i am not able to save the mapping in PI 7.1, i am getting the following error "the length 3 of the array 'sortedFunctionKeys' is not equal to the number 4 of functions".
Please let me know how to overcome this
Regards
Vinay P

can you check the syntax of the UDF?
seems there is some issue in it.
Also sortedFunctionKeys is this part of the UDF? then make sure the logic is correct behind the code.

Writing the ASCII value of a character found in a .txt file

I have a program that reads in a file and outputs certain characters to a new smaller file. The program works fine (thanks to some forum help) but I now need to print the ASCII value of the characters that are written to the file.
The problem I'm having (besides writing the ascii value of the char) is that the Unix .txt file has some weird properties. When I run the program on a .txt test file that I created with spaces in it, the program ignores the space characters.
Yet, when I run the program on the Unix file it wites the 'spaces' to the output file. That is why I want to write/print the ASCII value of the "blank "character in the Unix .txt file.
I already serached the forum and did a Google search for Char to ASCII conversion but I didn't find anything.
Thanks,
LS6v
Here's the code and the clips of the ouput files:
package source;
import javax.swing.*;
import java.io.*;
public class Scanner4
     public static void main(String[] args)
          getContents();
          System.exit(0);
     public static void getContents()
          char charArray[] = {'a','b','c','d','e','f','g','h','i','j','k','l','m','n','o','p','q','r','s','t','u','v','w','x','y','z',
                                     'A','B','C','D','E','F','G','H','I','J','K','L','M','N','O','P','Q','R','S','T','U','V','W','X','Y','Z',
                                       '0','1','2','3','4','5','6','7','8','9','$','.', '#', '-', '/', '*', '&', '(', ')',' '};
          String Chars = null;
          String lineSep = System.getProperty("line.separator");
          int iterator = 0;
          int i = 0;
          int charNum = 1;
          int lineCount = 1;
         // StringBuffer contents = new StringBuffer();
         //declared here only to make visible to finally clause
         BufferedReader input = null;
         BufferedWriter out = null;
         try {
                     //use buffering
                     //this implementation reads one line at a time
                     input = new BufferedReader( new FileReader( "C:\\testFile\\test1.txt" ));
                     out = new BufferedWriter( new FileWriter( "C:\\Scan file test\\Write\\test.txt" ));
                     String line = null;
                out.write( "Character\tLine Number\tCharacter Number" + lineSep );
                          while (( line = input.readLine()) != null)
                           //contents.append(System.getProperty("line.separator"));
                           i = 0;
                           charNum = 1;
                           iterator = 0;
                          while( i < line.length() )
                                         for( int count = 0; count < charArray.length; count++)
                                              if( (charArray[count] != line.charAt(iterator)) && (count+1 == charArray.length) )
                                                   out.write( "[" + line.charAt(iterator) + "]\t\t" + "[" + lineCount + "]\t\t" + "[" + charNum + "]" + lineSep);
                                              if( charArray[count] == line.charAt(iterator) )
                                                   break;
                                    charNum +=1;
                                    iterator +=1;
                                    i++;
                             lineCount +=1;
         catch (FileNotFoundException ex) {ex.printStackTrace();     System.out.println("File not found.");}
             catch (IOException ex){ex.printStackTrace();               System.out.println("IO Error.");}
         finally
                     try{
                             if (input!= null){
                           //flush and close both "input" and its underlying FileReader
                             input.close();
                             out.close();
           catch (IOException ex){ex.printStackTrace(); System.out.println("IO Error #2.");}
My created .txt file:
1. a!asdsad
2. @
3. #
4. $
5. %sdfsdf
6. ^
7. &
8. *
9. (
10. )
11. _
12. +sdfsdfsdf
13. -
14. =
15. ~
16. `
17. dfgdfg;
18. :
19. '
20. "fghfghf
21. ,
22. dfgdfg<
23. .
24. >fghfghfg
25. /
26. gggggggggggggggggggggggg?
27. a
Output for my .txt file:
Character     Line Number     Character Number
[!]          [1]          [5]
[@]          [2]          [4]
[%]          [5]          [4]
[^]          [6]          [4]
[_]          [11]          [5]
[+]          [12]          [5]
[=]          [14]          [5]
[~]          [15]          [5]
[`]          [16]          [5]
[;]          [17]          [11]
[:]          [18]          [5]
[']          [19]          [5]
["]          [20]          [5]
[,]          [21]          [5]
[<]          [22]          [11]
[>]          [24]          [5]
[?]          [26]          [29]************************************************************************
Output generated after reading the .txt file from the unix box:
Character     Line Number     Character Number
[ ]          [1]          [17]
[ ]          [1]          [18]
[ ]          [1]          [19]
[ ]          [1]          [6530]
[ ]          [2]          [2041]
[']          [29]          [1834]
[']          [29]          [2023]
[']          [30]          [1834]
[']          [30]          [2023]
[']          [30]          [2066]
[']          [47]          [2066]
[']          [67]          [2067]
[']          [77]          [2066]
[+]          [80]          [28]

Thanks I didn't even think to try and cast it to an int...
The tool I'm using to create my .txt in windows is Notepad.
I wrote a program to simply copy the original (3GB) Unix file and terminated it early so I could see what was there. What I found was some text and symbols and a lot of space between brief bursts of text. I can't really copy and paste an example because the amount of space is too large, it's basically a 3GB unformatted .txt file...
Unix file was created on: unknown
It sounds like the .txt file that I copied from the Unix box was formatted differently. But I thought that the formatting had more to do with end of line issues, not blank space between characters. Because a blank space should be seen by my program and ignored...
Here's the ASCII value of the "blank" spaces:
Character     Line Number     Character Number
[ ]          [1]          [17]     Ascii Value: [0]
[ ]          [1]          [18]     Ascii Value: [0]
[']          [868]          [2066]     Ascii Value: [39]
[,]          [877]          [186]     Ascii Value: [44]
[,]          [877]          [276]     Ascii Value: [44]
Also, the Ascii value printed for the blank spaces looks like the number zero here but it looks like it has strange points on the bottom of it in my output file. It looks like the extended ASCII character 234 Ω

How can i write the code in xml publisher desktop

hi all
How and where can i write the code in xml publisher desktop ???
shall i know how to write xml code or what ??
in which part can i write the code if i have more than one query ?

hi dear
Thanks for ur replay...
What i mean is : i used to work on reports builder,so :
1- i used to create more than query in some reports.
2- create formulas ,procedures....
NOW i want to create the same reports by using xml publisher desktop, so how can i do that...
when i use {color:#ff0000}report wizard{color}, i can not or i don`t know how to use more than one query, create formulas or procedures.
Please help me.
Thanks again.

Writing the code in formula..

Similar Messages

Maybe you are looking for