Writing to a data file with time stamp - Help!

My program currently asks the user to enter a path to save the data from my virtual channels. What I want is to have a default directory to store my data in and also have the file name that is created to be the date. I tried to use create open or replace but I cant get it to work. Any suggestions would be great. Also and comments to the code would help out a lot.
Thanks
Attachments:
Test.vi ‏141 KB

Look at the attachment. It uses a front panel path control set to only select a new or existing folder (right click and Browse Options). Then, using a Build Path and a Format Date/Time String, a full path to a file is created. Pass this to your Open/Create/Replace File.
Attachments:
Date to File Name.vi ‏13 KB

Similar Messages

  • Can someone help with a previous post labeled "Writing to a data file with time stamp - Help! "

    Can someone possibly help with a previous post labeled "Writing to a data file with time stamp - Help! "
    Thanks

    whats the problem?
    Aquaphire
    ---USING LABVIEW 6.1---

  • File with time stamp

    Hi All,
    I using RFC to file scenario ,in this when file is created it folder it is coming with date and time stamp.but i am not using add time stamp in processing paramerts.i have checked the file name in communication channel monitoring it is coming without timestamp
    but in folder file is getting created with time stamp.
    Regards

    Hi Gangadhar,
    In the receiver file adapter, under Processing tab, see the value of File Construction Mode.
    This value should be Create instead of Add Time Stamp.
    After making the changes save & activate the file receiver channel. The output file then will not have timestamp appended to its name.
    Regards,
    Gautam Purohit

  • Tungsten T3 - need to access DAT file with addresses - Please Help

    I have an old Palm Tungsten T3. The desktop computer with the synced address data has died and the T3 has lost power (so no addresses anymore).
    I have a .DAT file backup with all my addresses. Can anyone advise how I can get access to these.
    Reinstalling Palm Desktop 4.1.4e did not help as it doesn't allow me to import .DAT files.
    Can I import this file into any other app or open up in Excel etc?
    Any advice would be much appreciated.
    Thanks in advance.
    Post relates to: Tungsten T3
    This question was solved.
    View Solution.

    You have to physically copy the .dat file into the User directory over the existing address.dat file.  Find the one with your hotsync name abbreviated (i.e. - C:/Program Files/Palm (or PalmOne)/ your Hotsync name /address) and copy the .dat file there.
    Be sure you copy the file and keep another one safe in case something goes wrong.  The existing blank address.dat file will be only about 2k in size.
    Good luck!
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Data acquisition with time stamp

    Hi I'm using NI DAQ 6211 to acquire acceration, strain and temperature from a VI. I have made several modifications and my last two vis are attached. I need to get 1000 data points from a encoder and sampling the period is by far the best way to get acceleration considering my hardware. 
    Is there a way to ensure that all three variables are synchronised within a timestamp without the vi slowing down?
    Sincerely
    Ahmad
    Attachments:
    test_6.vi ‏57 KB
    test_5.vi ‏50 KB

    The problem lies in synchronising the acceleration with the load and temperature. For acceleration I'm getting a period from a counter with Implicit values (i.e. without specifying timing). I have set the number of samples to acquire to 1000 points and this task does not require sample timing. Post processing the period data in matlab gives me the acceleration.
    Now my vi uses a Sample Clock with set number of samples being acquired for the load and temperature. This means that a set number of samples for load and temperature can be acquired and this time may not be enough to acquire the acceleration points; hence they cannot be mapped in time.
    The period is implicit and I can't find a way to synchronise with the load and temperature that are acquired at a fixed sample rate. The bottle neck in this problem is to get the acceleration (period recorded) in sync with the load and temperature. If this can be done without any compromise to the speed of the vi then this problem is resolved.
    I have attached the vis which will show the development to overcome this problem.
    Sincerely
    Ahmad
    Attachments:
    test_1.vi ‏50 KB
    test_2.vi ‏49 KB
    test_7.vi ‏49 KB

  • Log GC status to a file with time stamps

    Hi,
    I ran a java app using java -Xms64M -Xmx256M -Xloggc:GClog.txt
    and it prints out the following to the file GClog.txt
    0.000: [GC 4095K->276K(65088K), 0.0113338 secs]
    Can anyone pls tell what all these numbers mean
    I know what the 65088K means. It's the initil heap size,
    but i'm not sure how to interpret 4095K->276K
    Thanks

    Amount of heap allocated/used/whatever-the-term-is before and after GC.

  • Which type of index is useful for date columns with time stamp

    Hi all,
    I am using date column in the where clause of an SQL Query. The values stored in the date column are includes timestamp. The query is very slow and there is no index on the date column.
    Can any body suggest which index is better on date columns
    Thanks

    I am using date column in the where clause of an SQL Query.Dates a re hard queries to tune. This ...
    WHERE start_date BETWEEN to_date('01-SEP-05') AND to_date('02-SEP-05')...probably requires a very different execution plan to this...
    WHERE start_date BETWEEN to_date('01-JAN-01') AND to_date('02-SEP-05')Just bunging an index on the date column may speed up your specific query but break something else. So be careful.
    Cheers, APC

  • How to read multiple Digital samples and plot a chart with time stamps

    Hi,
     Could anyone send me a code that:
    1. Reads 'multiple samples(lets say 4) from single digital input' 
    2. 'plot digital data as a chart with time stamps'
    3. Find frequency
    4. Log data into file with time stamps
    I have attached the code which i tried.
    Thanks,
    LK
    Attachments:
    DigitalNSample.vi ‏27 KB
    DigitalNSample.vi ‏27 KB

    Hi,
     Could anyone send me a code that:
    1. Reads 'multiple samples(lets say 4) from single digital input' using NI USB 6009 or NI USB 6251.
    2. 'plot digital data as a chart with time stamps'
    3. Find frequency
    4. Log data into file with time stamps
    I have attached the code which i tried.
    Thanks,
    LK
    Attachments:
    DigitalNSample.vi ‏27 KB

  • TDMS viewer not showing data with time stamp

    Need help with time stamping data in a TDMS file generated by DAQ Assistant.
    When I use the TDMS Viewer, with the x-scale set to absolute time, the date starts at 1903. If I use Excel to look at the file the start time is correct (i.e. 2013).
    Solved!
    Go to Solution.

    Bo_Xie, I have simplifed my VI and now able to display the correct time stamp. Thank for your time!

  • File name for append processing mode with time stamp

    Hi Experts
    we are doing file to file scenario using the processing mode as Append.
    the requirement for us to append the files and we need to have new file name with time stamp added to the appended file.but in the processing mode of the file adapter either we can append or add time stamp. thatz the problem I am facing now.
    we are doing file based processing not message based ,micheal blog regarding the dynamic file name is for message based not for file based.
    Please provide your valuable comments.
    Thanks
    Faheem

    Hi mohamed,
                      I suggest you to map the target source structure to the required filename u want, like for example ur filename is input26062008.txt means to the target structure u perform the following mapping
    constant (input) concat with currentdate function --> concat with constant .txt --> map this concat to target. So u will get the filename u expected with the time.
    Then in the communication channel u select the mode as append. Now ur requirement will get solve i think so. plz try.
    Regards,
    Murugavel

  • Inserting Current Date with time stamp in oracle database

    Hi Experts,
                     I want to insert the current Date and time stamp in a field in the Oracle Database Table.
    I am able to insert date but i am not able to insert the date with time stamp. Any Suggestions??
    Thanks
    Naveen

    Naveen,
    Do you want to get current date (from sysdate) with a specific format or transform a value containing a date/time value to insert it in ORACLE ?
    Usually, you insert current datetimestamp in a date field using this :
    TO_DATE(sysdate,'dd/mm/yyyy hh:mi:ss')
    you may have to tweak the format pattern ('dd/mm....') according to your needs
    if you want to transform a date, use something like this:
    TO_DATE(your_date,your_format)
    but make sure your format is compliant with your date, ie
    TO_DATE('31/12/2008','MM/DD/YYYY') could raise error (litteral does not match) cuz ORACLE can't recognize 31 as a month pattern
    Chris

  • Mail attachment with time stamp

    Hi
    My scenario is Proxy to Mail.
    On receiver side I am getting the data as an attachment but i want that attachment with time stamp.
    How to add time stamp to the attachment in reciever mail adapter.
    Regards
    Sowmya
    Edited by: Sowmya on Aug 28, 2008 12:24 PM

    hi sowmya,
       The bellow link for MessageTransformBean..
      [http://help.sap.com/saphelp_nw70/helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm]
      In that ContentDisposition is used to fill the value for Attachment file name..
      Its allows the value accordingly "RFC1806" Note..
      RFC1806 allows accordingly RFC822 ..
      Check RFC822 ..
        5.  DATE AND TIME SPECIFICATION
    Regards,
    Prakasu

  • Apache Trinidad is running with time-stamp checking enabled.

    Experts,
    Contents of my web.xml file
    <context-param>
        <description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
        <param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
        <param-value>false</param-value>
      </context-param>When my application runs i get the following on the weblogic console
    <ViewHandlerImpl> <_checkTimestamp> Apache Trinidad is running with time-stamp checking enabled. This should not be used in a production environment. See the org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml
    <UIXEditableValue> <_isBeanValidationAvailable> A Bean Validation provider is not present, therefore bean validation is disabled
    Isnt it a bit strange ? Please advise what is wrong.
    thnks
    jdev 11.1.2.1

    If you're talking about the integrated WLS, time-stamp checking is automatically enabled no matter what so that changes you make in the IDE can be picked up. It's nothing to worry about.
    John

  • Why is Firefox writing so much data all the time?

    I am running Windows 7 x64 and Firefox 8. In my Task Manager I display the I/O Write Bytes of all processes. I have found that Firefox is ALWAYS the Process with the largest amount of write bytes after it has been running an hour or so even though there are dozens of other processes there. The only Web page is Google and all of my plugins are disabled.
    Why is Firefox writing so much data all the time?

    Firefox may be updating the phishing protection database or do maintenance with other files like places.sqlite. It should stop at some point if that has been done.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem.
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Advertisement Details of Specific Computer with Time Stamp

    Hello Guys,
    Could you please help me how to get Advertisement Details of Specific Computer with Time Stamp?
    Thanks in Advance.
    Mukhyaprana

    It's true that there is no reliable install date, but IMO last status time for an advertisement is usually close enough. 
    Select r.name0, adv.advertisementname, stat.laststatename, stat.lastexecutionresult, stat.lastStatusTime
    from v_r_system r
    inner join v_clientAdvertisementStatus stat on stat.resourceID = r.resourceID
    inner join v_advertisement adv on stat.AdvertisementID = adv.AdvertisementID
    where r.name0 = 'clientname'
    order by adv.advertisementname

Maybe you are looking for