Writing to spread sheets with more than single precision

Hi everyone,
Im recording data by using the write to spread sheet VI in Labview 8,
it records single precision which is a problem for me as I require greater
precision.
Are there ways around this issue?
Thanks
Solved!
Go to Solution.

What do you mean by this? Is it possible for you to post code which only shows what you are trying to explain?
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Similar Messages

Can you use Live Office to post a Spread Sheet to more than your own inbox?

Can you use Live Office to post a Spread Sheet to more than your own inbox?
I have a spread sheet that I want to send to 5 different inboxes, Can I do this with LiveOffice
Thanks
Jeff

Hi Jeff,
Live Office's purpose is to allow Crystal and Web I content to be imported into Excel. Basically it allows BO data be displayeed and refreshable inside eXcel.
If you are using CR to develop the report you can set eXcel as the output format and send it to peoples inboxes. You might be able to do the same with csv for Web I
Regards
Alan

Excel 2013 (pro plus) extermely slow with sheets with more than 100 checkboxes

I have a customer with Excel 2013 (pro plus).
They use sheets with more than 100 checkboxes in it.
The sheet is extremly slow to display. When a user starts scrolling down, the checkboxes appear very slowly, one by one.
It happens with all users, on both x86 and 64bits Windows 8 PC's and Office clients (32b & 64b).
Anyone any idea?

Hi R.Nieraeth,
Could you please let us know what exactly these checkbox was used for ? Any formulas depend on these checkbox? Or any VBA code in this excel file? If so, you may need to check your formulas or the VBA code.
In addition,does this issue happen only on excel 2013? You can try to disable hardware graphics acceleration: Click
File, and then click Options. In the Advanced group, click to select the
Disable hardware graphics acceleration check box. Click ok.
Also please check if the following thread is helpful:
http://social.technet.microsoft.com/Forums/en-US/a9a257fa-ce8b-4399-860c-563022b8714f/checkbox-bug-in-excel-2010-slow-response?forum=excel

How to create a workbook in BI 7.0 with more than 15 Sheets?

Hi Experts,
i would like to know how to create a workbook with more than 15 Sheets.
One Workbook should be based on one query and the other on differents queries.
How should be the authorization? If you have any documents please just send it to me.
Cheers
G

HI
Execute one report save it in the workbook, then you can goto the tools and click insert query, like that you can add how many queries you want. then right click on the reports goto properties there in the interface tab click the check button for refrsh all the queries. finally save it with the option save existing wrokbook(beacause you already save the first query in the workbook)
Regards,
chandra.

Anyone with more than one iPhone 6/6+ in same order getting there phones shipped if all your phones didn't have 9-19 when you ordered?

Our Verizon account has 10 lines and I figure we're paying over $7,000 a year, when I think of how much money total we have payed to Verizon only to be jerked around and around and lied too over and over again really does make me sick. 6 of these contracts have ended and 3 will be up in next couple months and 1 has a year left so the cancelation fees would not be that bad. And with the other big carrier I've heard it might be cheaper on monthly service. All I wanted from Verizon was for them to do whats right.
I Ordered
iPhone 6 16gb gray
iPhone 6+ 16gb gray
iPhone 6+ 64gb gray
iPhone 6+ 64gb silver
all on the same order. I finished at 3:19 am est and got a date of 10/14 even though all the phones except the 6+ 16 gb gray had 9/19. Got confirmation email at 4:56 will ship by 10/14 I got worried that all the phones would not ship till 10/14 and contacted verizon thru facebook messenger. They told me my phones would ship in the order received and not be held up by a phone that wasn't available in my order. And based on the time of my order she said 9/19 for the 6 and 6+ silver, 10/7 for the 6+ 64 gray , 10/14 for 6+ 16 gray. On Monday morning my status changed to 9/19:):) in the afternoon in changed to unknown. I called 611 and rep went thru all my phones with a time sheet she had and said i should get all but the 6+ 16 gray on 9/19, she said that one you had to order by 3:00 to get on 9/19. On Wednesday my status changed to 10/14 , called 611 again and this lady told me all my phones had 10/14 listed after them. She told me she didn't know what to tell me that Apple ships the phones and its out of Verizon's hands because they don't have the phones. then she told me to call Apple (and gave me the phone # ) and see if they ship preorders with more than 1 in a order when their available or wait till all are. I called them ( they laughed that Verizon had me call them) and they don't hold up orders . Called customer service back and guy said at least 10 times ....I ASSURE YOU VERIZON WILL NOT HOLD YOUR PHONES!!! i said of course they're not actually putting them in a box and waiting for all, they're sending them to other people who ordered after me. I asked him if my order could be separated/ rebuilt and do a (jump the line request) so i could get my phones when i should. He said there is no such thing at verizon....he has worked there many years and if there was he would know. Someone posted # to Internet orders so i called them Thursday morning, spoke to a very nice guy he said my phones that i should get i would and i should get an e-mail later that day and if i didnt get anything by 8:00 pm to call back. Before we hung up i asked if I didn't get anything did he know if they could cancel/separate/rebuild and do jump the line, he said they can do that and put me on hold while he spoke with a supervisor, he came back and said if nothing happened that day they would do that with my order. I got nothing, called Internet orders back at 8:30pm... went thru my history and asked them to do the rebuild. She transferred me to supervisor who REFUSED to rebuild my order, that is only for orders that have a technical error. She was also the first person from Verizon to tell me that they DO NOT ship orders in multiple shipments, they will only send when everything is available. She then said your order was given a delivery date of before 10/14 and that's when you'll get all your phones. I let her know that there is nothing about that confirmation that tells me that the phones that I ordered that had 9/19 deliver by dates would not be delivered then, 9/19 is before 10/14.

Same thing happened to me!!! They made a shady business move and they should be ashamed. Placed a pre-order for an Phone 6 and an iPhone 6 Plus at 2 AM on the 12th and got my pre-order in line just like everyone else did that morning. The 6 said delivery by 9/19 and the Plus was already back ordered to 10/7 but that's fine, I expected the Plus to be harder to get anyway. Being that both phones were eligible it made sense to just place one order given this hasn't been an issue in the past. However, Verizon moved my iPhone 6 pre-order delivery to coincide with the back ordered Plus so they don't have to ship each phone separately!!! I have to wait for something on backorder while the other is ready so they can save on shipping cost. I expected the one that I pre-ordered IN TIME FOR A 9/19 delivery and waited my turn "in (on)line" like everyone else I should get that when it told me that in the checkout, THEN send the Plus when it becomes available. I even have the confirmation email that says "Deliver by 9/19"!!! Every company you order from sends you the backorder item when it becomes in stock, they don't wait and hold the entire order for it. WHAT A BUNCH OF CRAP!!!

Can you get an Apple ID for corporate use to associate with more than 10 devices?

Can you get an Apple ID for corporate use to associate with more than 10 devices?

I don't believe you can. The usual model for iOS app distribution is for each device to have a unique Apple ID and for apps to be acquired separately, either via codes from the Volume Purchase Program or individual purchase through the iTunes Store. The licensing from the iTunes Store doesn't allow an app to be installed on more than one device unless all the devices are being used by a single person, so you legally cannot install one app on multiple corporate devices in the circumstances most businesses use.
Regards.

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
   <f:facet name="second">
                                            <af:panelStretchLayout id="pa1"
                                                                   binding="#{backingBeanScope.Assign.pa1}">
                                                <f:facet name="center">
                                                    <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
                                                               binding="#{backingBeanScope.Assign.r1}"/>
                                                </f:facet>
                                            </af:panelStretchLayout>
                                        </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

Creating Pages in PeopleSoft with more than one HTML Form

Hi,
We've a requirement to create a page in PIA with more than one HTML form.
As per PBooks - "The page being developed cannot be built using PeopleSoft Application Designer.
An example of this is a page that requires more than one HTML form.
PeopleSoft Pure Internet Architecture places the entire page inside of a single form tag, so no other HTML form tags can be added.
In this case the requirements of the page can't be met by pages created in PeopleSoft Application Designer, so use IScripts instead."
If someone can share his/her experience, It Would be of great help to me.
-Thanks!!

Take a look at my IScript postings. Let me know if you still have questions after reading these blog posts.

Row chaining in table with more than 255 columns

Hi,
I have a table with 1000 columns.
I saw the following citation: "Any table with more then 255 columns will have chained
rows (we break really wide tables up)."
If I insert a row populated with only the first 3 columns (the others are null), is a row chaining occurred?
I tried to insert a row described above and no row chaining occurred.
As I understand, a row chaining occurs in a table with 1000 columns only when the populated data increases
the block size OR when more than 255 columns are populated. Am I right?
Thanks
dyahav

user10952094 wrote:
Hi,
I have a table with 1000 columns.
I saw the following citation: "Any table with more then 255 columns will have chained
rows (we break really wide tables up)."
If I insert a row populated with only the first 3 columns (the others are null), is a row chaining occurred?
I tried to insert a row described above and no row chaining occurred.
As I understand, a row chaining occurs in a table with 1000 columns only when the populated data increases
the block size OR when more than 255 columns are populated. Am I right?
Thanks
dyahavYesterday, I stated this on the forum "Tables with more than 255 columns will always have chained rows." My statement needs clarification. It was based on the following:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28318/schema.htm#i4383
"Oracle Database can only store 255 columns in a row piece. Thus, if you insert a row into a table that has 1000 columns, then the database creates 4 row pieces, typically chained over multiple blocks."
And this paraphrase from "Practical Oracle 8i":
V$SYSSTAT will show increasing values for CONTINUED ROW FETCH as table rows are read for tables containing more than 255 columns.
Related information may also be found here:
http://download.oracle.com/docs/cd/B10501_01/server.920/a96524/c11schem.htm
"When a table has more than 255 columns, rows that have data after the 255th column are likely to be chained within the same block. This is called intra-block chaining. A chained row's pieces are chained together using the rowids of the pieces. With intra-block chaining, users receive all the data in the same block. If the row fits in the block, users do not see an effect in I/O performance, because no extra I/O operation is required to retrieve the rest of the row."
http://download.oracle.com/docs/html/B14340_01/data.htm
"For a table with several columns, the key question to consider is the (average) row length, not the number of columns. Having more than 255 columns in a table built with a smaller block size typically results in intrablock chaining.
Oracle stores multiple row pieces in the same block, but the overhead to maintain the column information is minimal as long as all row pieces fit in a single data block. If the rows don't fit in a single data block, you may consider using a larger database block size (or use multiple block sizes in the same database). "
Why not a test case?
Create a test table named T4 with 1000 columns.
With the table created, insert 1,000 rows into the table, populating the first 257 columns each with a random 3 byte string which should result in an average row length of about 771 bytes.
SPOOL C:\TESTME.TXT
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
INSERT INTO T4 (
COL1,
COL2,
COL3,
COL255,
COL256,
COL257)
SELECT
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3)
FROM
DUAL
CONNECT BY
LEVEL<=1000;
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SET AUTOTRACE TRACEONLY STATISTICS
SELECT
FROM
T4;
SET AUTOTRACE OFF
SELECT
SN.NAME,
SN.STATISTIC#,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SPOOL OFFWhat are the results of the above?
Before the insert:
NAME                      VALUE
table fetch continue        166
After the insert:
NAME                      VALUE
table fetch continue        166
After the select:
NAME                 STATISTIC#      VALUE
table fetch continue        252        332 Another test, this time with an average row length of about 12 bytes:
DELETE FROM T4;
COMMIT;
SPOOL C:\TESTME2.TXT
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
INSERT INTO T4 (
COL1,
COL256,
COL257,
COL999)
SELECT
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3)
FROM
DUAL
CONNECT BY
LEVEL<=100000;
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SET AUTOTRACE TRACEONLY STATISTICS
SELECT
FROM
T4;
SET AUTOTRACE OFF
SELECT
SN.NAME,
SN.STATISTIC#,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SPOOL OFFWith 100,000 rows each containing about 12 bytes, what should the 'table fetch continued row' statistic show?
Before the insert:
NAME                      VALUE
table fetch continue        332
After the insert:
NAME                      VALUE
table fetch continue        332
After the select:
NAME                 STATISTIC#      VALUE
table fetch continue        252      33695The final test only inserts data into the first 4 columns:
DELETE FROM T4;
COMMIT;
SPOOL C:\TESTME3.TXT
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
INSERT INTO T4 (
COL1,
COL2,
COL3,
COL4)
SELECT
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3),
DBMS_RANDOM.STRING('A',3)
FROM
DUAL
CONNECT BY
LEVEL<=100000;
SELECT
SN.NAME,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SET AUTOTRACE TRACEONLY STATISTICS
SELECT
FROM
T4;
SET AUTOTRACE OFF
SELECT
SN.NAME,
SN.STATISTIC#,
MS.VALUE
FROM
V$MYSTAT MS,
V$STATNAME SN
WHERE
SN.NAME = 'table fetch continued row'
AND SN.STATISTIC#=MS.STATISTIC#;
SPOOL OFFWhat should the 'table fetch continued row' show?
Before the insert:
NAME                      VALUE
table fetch continue      33695
After the insert:
NAME                      VALUE
table fetch continue      33695
After the select:
NAME                 STATISTIC#      VALUE
table fetch continue        252      33695 My statement "Tables with more than 255 columns will always have chained rows." needs to be clarified:
"Tables with more than 255 columns will always have chained rows +(row pieces)+ if a column beyond column 255 is used, but the 'table fetch continued row' statistic +may+ only increase in value if the remaining row pieces are found in a different block."
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.
Edited by: Charles Hooper on Aug 5, 2009 9:52 AM
Paraphrase misspelled the view name "V$SYSSTAT", corrected a couple minor typos, and changed "will" to "may" in the closing paragraph as this appears to be the behavior based on the test case.

Why can't owa_text.vc_arr handle the string with more than 4000 characters?

I am using PL_SQL with Oracle8i and OAS 4.0 web server.I want to
use owa_text.vc_arr to pass the inputs in serval text areas in the form on a web application.
If the input string length is less than 4000 characters, everything works fine.However when the strings are longer than 4000 characters but less than the max length 32767 characters, I got this error message:
OWS-05101: Execution failed due to Oracle error 2005
ORA-02005: implicit (-1) length not valid for this bind or define datatype.
In the Oracle Application Server 4.0 documment, it says
about owa_text.vc_arr :Type vc_arr is table of varchar2(32767)
index by binary_integer. It means that owa_text.vc_arr can handle multiple strings and each string can have up to 32767 single byte characters, is it right?
Owa_text.vc_arr is supposed to handle the string with more
than 4000 characters, is it true? Could anyone tell me why? Any
help will be greatly appreciated!!!
Thanks very much.
Helena Wang
Here is the pl_sql procedure to create my form on the web:
PROCEDURE myform
IS
BEGIN
htp.p('
<form action="'||service_path||'helena_test.saveform3"
method=post>
<input type=hidden name=tdescription value="X">
Input1: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
Input2: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
<input type=submit name=WSave value="Save">
</form>
END;
/***** here is the pl_sql procedure which I use to save the
form***/
procedure saveform3(tdescription in owa_text.vc_arr,
WSave in varchar2 default 'No')
is
len pls_integer;
begin
for i in 2..tdescription.count loop
len := length(tdescription(i));
htp.p(len);
htp.p(tdescription(i));
end loop;
end;

The maximum size of a VARCHAR2 field in Oracle 8i is 4000 bytes.
you'll ned to use a LOB type (or LONG if you prefer the old way)

Bugged audio playback? When I start working with more than 1 audio track.

Hi!
I have been using premiere elements 12 for editing FullHD videos.
Brand new for me just bought it like 2 weeks ago.
Now during the last couple weeks I have had this MAJOR proglem with editing the audio.
This problem is headache and turns my simple editing into almost impossibilites.
I have had this problem with all my projects. _ALL_
Usually the problem seems to appear when I want to start working with several audio tracks.
At somepoint my projects just get ruined, I simply cannot hear the audio tracks.
The audio starts to disapear randomly from all the audio tracks.
It is not only playback problem. When I exported the video, the audio was partly missing, same as the project.
I have tried to look help on forums and search all what I could find, but havent been able to solve this.
Small fix has slightly helped:
I export audio to single track and bring it back to project. This works but I still usually have more editing to do.
I simply cannot understand why the playback disapears, I fear it is a bug.
I found lot of earlier version problems on people with similar type of problems, but no help for this version of program.
To solve the matter I have changed my audio setting in PE12.
Tried Premiere Elements WDM Sound and ASIO4ALL V2, but same problem on both.
I have looked up that my audio playback device and PE12 matches, and are not muted, and volumes maxed.
I have deleted my C:\ appdata\roaming\adobe premiere elements & premiere elements 12 folder preferences.. not helping..
I press the update pretty much everyday hoping for new version.. But yes, program keeps telling me its the latest.
I usually only work with 3 audio track maxinum. And I am doing really the most basic stuff here..
I have set all my audios to foreground and it has given me best results, but it does not seem to take the problem away as at somepoint randomly my audio playback is missing again, randomly across the playback.
Please anyone? I am feeling hopeless here.
Info on my computer:
Operating system: Win7
Processor: AMD Phenom(tm) x4 955 processor 3.20 GHz
memory (RAM): 4GB
system: 64bit
<moved from downloading, installing, setting up forum by mod- kglad>
Message was edited by: kglad

First of all, thank you for replying my message!
I will go and try to answer best I can.
Source media properties:
Progressive frame rate, I record this from a game.
Recording program: dxtory
codec: Lagarith Lossless codec
Format: avi
Frame width: 1920
Frame height: 1080
Data rate: 1990656kbps
total bit rate 1992192kbps
Frame rate 30/frames/seccond
Audio of video properties:
Codec: PCM
Format: 16bit, stereo
Bit rate: 1536kbps
Channels: 2(stereo)
Audio sample rate 48 kHz
In addition to that I use wav files for music and narrate
Music files sizes 20-50mb
bit rate: ~1411kbps
In total sizes of audio involved is usually something like 300mb
What are you or the program setting as the project preset in the new project dialog. See Edit Menu/Project Settings/General and its Editing Mode, Timebase, and Frame Size readings.
I opened new project and this is what i got:
Editing mode: HD 1080i
Timebase: 25,00 frames/second
Frame size: 1920 x1080
Audio is 48000 Hz
(I dont know how to change these, btw. Program don't seem to let me change editing mode.
I also looked up my most recent project and found these settings:
Editing Mode: DSLR
Timebase: 30,00 frames/second
Frame size: 1920 x1080
..and same audio settings
Do the problems persist if you start a new project? Do you find the audio problems develop when the Timeline content is fairly well developed or can the problems occur when there a minimal amount of content of those tracks? Let us look at the size and duration of this project.
Yes, I have had this problem with all my projects. Sometimes it goes away tho, just enough for me to work bit more. My work progress usually starts by clipping the video material, like 1h material to 8minutes in clips. After that I want to work with audio tracks, and here problems start! When I start working with more than 1 track, so the problem is at later stage. To fix the problem a small fix I have used, I export audio like music and effects tracks together to 1 wav and bring it back. After that, I start working with narrate track. To describe the problem with audio:
Audio Randomly starts to disapear when I playback, and can also be gone if I export the video out.
My source videos total size are usually within 80Gb max limit and audio edit material 300mb total.
In my last project my biggest source video was 47GB and leingth of 1h 4m, in addition to that I had 3 smaller videos, sizes of 1GB, 1,54GB and 300MB.
Is there any evidence that you are accidentially moving the audio track rubberband to alter the audio volume. That rubberband is the orange line that runs horizontally through the middle of the audio clip when you are looking at the wave form display style of that audio track. The rubberband represents audio volume.
No, audio volumes might have been adjusted in my tracks but they are present. The problem is usually like ~2-5seconds, a random audio track can be heard (like music or narrate) or just no sounds at all. This makes it very difficult to work with the audio. Also I gotta say that this problem starts by simply having the 2-3 audio tracks.. In my recent project the only adjustment I used to edit the audio was fade in/out.
I don't have any other audio problems with any other programs.
I am more than happy to provide more information if needed. I hope this information helps.
In addition I can say that when I close Adobe Premiere Elements 12, it crashes. No idea why.
I have also looked up my firewall settings, anything involved adobe and premiere..
In addition some effects like HD text templates make "Adobe Media Core CS6" crash. I tend to just not use em, or if I need em, I add em at end of the edits.
I hope this helps, I would really like to solve this problem.
Thank you alot for taking the time to answer! I welcome anyone to help mee too! Please giev links to similar problems too. Thank you everybody!

Need help: Dimensional column has assoc with more than 1 level

Hi,
I am trying to have multiple drill paths for a single dimension. For example, the Date dimension should be navigable by the following hierarchies:
DateDimension
+---- Calendar Year
......---- Calendar Quarter
............--- Calendar Month
..................-- Day
+---- Calendar Year
......---- Day
So, in other words, in Answers I should be able to add 'Calendar Year' to my report, display results, and then click down the path Calendar Year -> Calendar Quarter -> Calendar Month -> Day OR Calendar Year -> Day.
However, when I model this in the Admin tool, it allows it, but then I add the column in Answers and get a runtime error:
+[nQSError: 14064] Dimensional column [column name] has associations with more than one level+
This is possible in BO and other tools. If it is not possible in Oracle BI EE, then one alternative would be to have two separate versions of 'Calendar Year' added to the report in Answers, each with their own drill path.
Any ideas???
Thanks for any help you can provide.
Matt Warden
Balanced Insight, Inc.

Hi,
You try this one .
Create the Hierarchy Year --> Quarter--->Month-->Week-->Day in rpd as usual manner .But in Year report use navigate option in column properties add Quarterly Report (Caption it as 'Quarter')and Day level report(Caption it as 'Day') in navigate option.So when you click on Year column it i will prompt to select either Quarter or Day and when u select Quarter u will have normal drill functionality from Quarter to Month to Week and Day.Hope this helps you.
Thanks.

Fill BEx Variable with more than one value via Custom Exit

Dear SDN comunity,
I want to fill a BEx Variable via a custom exit. My problem is, I don't know how to fill this variable with more than one value.
I try to give you some background info based on an exaple:
<u><b>Variable-Details</b></u>
<b>Type of Variable:</b> Characteristic Value
<b>Variable Name:</b> ZCCD
<b>Description:</b> Company Code Selection
<b>Processing by:</b> Custom Exit
<b>Characteristic:</b> Company Code
<b>Variable Represents:</b> Multiple Single Values
<u><b>This is the used ABAP code:</b></u>
WHEN 'ZCCD'.
CLEAR l_s_range.
l_s_range-low = '2002;2004'.
l_s_range-sign = 'I'.
l_s_range-sign = 'EQ'.
APPEND l_s_range TO e_t_range.
<u><b>The system returns this message:</b></u>
Value "2002;2004" is too long for variable ZCCD
appreciate your help!
//michael

Eugene, Marcus
it works now, thx a lot!
Please find attached the final code:
CLEAR l_s_range.
l_s_range-low = '2002'.
l_s_range-sign = 'I'.
l_s_range-<b>opt</b> = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR l_s_range.
l_s_range-low = '2004'.
l_s_range-sign = 'I'.
l_s_range-<b>opt</b> = 'EQ'.
APPEND l_s_range TO e_t_range.
(Delta to Marcus's code is bold)

JSR-75 PIM API creating Contact with more than one Number (Phone,Fax ...)

Hi everybody
I try to create a contact with more than one Phonenumber using the method contact.addString(...) .
Contact with one single number is no Problem but contacts with more than one Number are ignored and are not stored to the phonebook. I try to add the Numbers using a for -loop. Is there an other way to solve this Problem?
please Help.
Thank You.

Wonder if you have made any progress - if so,
could you share ?

How do I share my contacts with more than one group? I really don't want to have re-type them into a different group. Help!

How do I share my contacts with more than one group without having to re-type them into each group?

Without "pretending" to be yourself on the other phone (change settings) there's nothing else you can do.
iOS devices are meant to be single user and can't view iCloud.com the same way a Mac or PC can do.
You need to find a desktop or laptop machine (Mac or PC) to log in at iCloud.

Writing to spread sheets with more than single precision

Similar Messages

Maybe you are looking for