Writing to the DOCTYPE area with Import/Export client

I want to use a FrameMaker Export client to write to the DOCTYPE area of an XML file when exporting from structured Frame. I am trying to add some entity definitions. Is this possible with a structured FrameMaker export client? Thanks in advance.
Rick Quatro
Carmen Publishing
585-659-8267
www.frameexpert.com

Hi Rick
Have you tried adding the entity information to the Entity Declarations reference page? This is the easiest way to create entity declarations in the XML instance.
However, if you have an XSLT post process stylesheet, the Doctype declaration and any entities will be lost, so you would have to add them as part of the XSLT stylesheet instead.
I hope this helps
Regards
Ian

Similar Messages

In the process of reformatting my macbook pro, I saved everything but my keyword list. The keywords are with the images, but the total list I use under "Keywords" is not present. Is there a way to re-create all my keywords I've used over the last 6 year

In the process of reformatting my macbook pro, I saved everything but my keyword list. The keywords are with the images, but the total list I use under "Keywords" is not present. Is there a way to re-create all my keywords I've used over the last 6 years.

I accomplished what I needed last night. I remembered I had picked my favorite images from each year and put them in a "favorite" folder by year. These folders included 500 to 1200 images per year. I pulled up the folder for each year and highlighted all images and clicked on "Keywords" and all keywords used for all images were listed. I made those keywords persistent. It took me a while to realize I had to click on each keyword to make it persistent. After doing this for all years, I assume 95% of all keywords I have used over the many years were back in my list. I'm sure there is probably a more "technical" way to accomplish what I needed, but this seems to have worked. I also exported my list into a word document and is saved on my hard drive.
If I had not made folders with my favorite images for each year, I could not have used this method, so if you figure out a better way, I like to hear it. Thanks for your comments and willingness to help.

I move my videos from camera roll to a new folder. After i turn off & on my phone, the videos disappears. The videos are very important to me. Please please help. how can i retrieve?

i move my videos from camera roll to a new folder. after turn off & on again my phone, the videos disappears. the videos are very important to me. Is there any way i can retrieve it? please please help. thanks.

Photo Stream is not a backup.
Photo Stream has a limit so is temporary.
iTunes does not handle the import of photos/videos from any digital camera including from the iPhone's Camera Roll.
Photos/videos in the Camera Roll can be imported by your computer as with any other digital camera.

Populating the screen area with color

Please help me
how could i populate the screen area with color based on the x,y position values getting from the database table
x,y positions are saved in the database already i want to use those values

Do you mean if x is 200 and y is 300 then you want a color like 0x200300?

I have 2 new email accounts added to my Imac. How do I get them to appear on the macbook and my iPhone. The computers are with maverick and the iPhone has the latest iOS 7.0.3. Thanks

I have added 2 new email accounts to my Imac. How do I get them to appear on my macbook pro and my iPhone. The computers are with maverick and the iPhone has the latest iOS 7.0.3. Thanks

Connect the device to the computer and iTunes and follow the instructions on this support document. http://support.apple.com/kb/HT1808

Not able to see all the subject areas with BI Author and BI Consumer roes

Hi All,
Recently we have upgraded to OBIEE 11G and we have created new users and assigned groups in the new 11G.
Generally users sholud be able to see all the dashboards and subject areas with the default BI Author and BI Consumer roles.
But in our 11G system users cannot see all the subject areas with the above groups, only if we give the BI Administrator role the they can see all the subject areas and dashboards.
We cannot give BI Administrator role to all the users....Please advise.
Thanks
Praveen.

Hi,
Check the application roles of BI Author and BI Consumer, they must be having BI Author and Consumer Groups. Check the privileges for Users and Application roles in Catalog manager for Dashboards and Check the Permissions for Users and Application in RPD for subject areas. Make necessary changes, restart BI server and Presentation services. Now users should be able to see dashboards and subject areas,
If it helped mark Helpful/Correct
Regards,
OBD

Not able to see all the subject areas with BI Author and BI Consumer roles

Hi All,
Recently we have upgraded to OBIEE 11G and we have created new users and assigned groups in the new 11G.
Generally users sholud be able to see all the dashboards and subject areas with the default BI Author and BI Consumer roles.
But in our 11G system users cannot see all the subject areas with the above groups, only if we give the BI Administrator role the they can see all the subject areas and dashboards.
We cannot give BI Administrator role to all the users....Please advise.
Thanks
Praveen.

Hi,
Check the application roles of BI Author and BI Consumer, they must be having BI Author and Consumer Groups. Check the privileges for Users and Application roles in Catalog manager for Dashboards and Check the Permissions for Users and Application in RPD for subject areas. Make necessary changes, restart BI server and Presentation services. Now users should be able to see dashboards and subject areas,
If it helped mark Helpful/Correct
Regards,
OBD

HT203551 I have an iphone 4, the calls are with Telstra but internet is with dodo, I can recieve emails but not send them?Does anybody know how to remedy this?

I have an iphone 4, the calls are with telstra but internet is with Dodo.I can recieve emails but not send them?Could anyone please remedy this?

Welcome to the Apple Community.
i assume the email account is your iCloud email account. have you tried turning off settings > iCloud > mail, restarting the phone and then re-enabling mail again.

Does the IPAD come with a VPN client?, Does the IPAD come with a VPN client?

Does the IPAD come with a VPN client build into IOS? If not where can I find one. I need to configure a PPTP VPN account?
Many Thanks
Graham

How to Setup PPTP VPN on ipad
Tap Settings > General > Network > VPN > Add VPN Configuration. Then use the VPN settings for your device.
Open the Settings application
Click on General
Click on Network
Click on VPN
Click on Add VPN Configuration
Select PPTP
In the Description field, enter vpntraffic
In the Server field, enter your supplied server (for example: thailand vpn)
In the Account field, enter your supplied username
In the Password field, enter your supplied password
Ensure that Send All Traffic is set to ON
Ensure that Encryption is set to Auto
Click Save
Press the Home button
Open the Settings application
Click on VPN
Click on vpntraffic
Set VPN to ON

24p from a DVX 100 - What are the best ways to Import / Export

Hi Everyone,
A friend of mine did some shooting on his DVX100 on 24p. He then captured them to avi files. I have the files on my hard drive. What is the best settings when importing these files and what should my settings be for exporting. I want to eventually watch it, when I'm done editing, on a big screen tv.

I have the same problem. I have a bunch of footage captured on Premiere Pro that I have imported into FCP 6. Other than having to modify the timecode to match the original timecode I haven't had a problem editing with the footage. It looks good to me as far as quality goes.
I have yet to output to DVD and watch it on a real TV yet, but if it looks this good in the canvas I'm hoping it looks good on TV.

Help using the Bones tool with imported art

Hi
I have a game design project that I have to animate characters for. The Bone tool in Flash seems like the perfect tool for the job!
Here's my problem: I can draw things in Flash and rig them with the Bone tool and animate them fine. However, I'm much more comfortable with Illustrator. But whenever I try to bring in external artwork, I get lots of errors.
Create (solid color, single object) body parts as layers in Illustrator. Import Illy file to stage in Flash. Drag bone tool across body. Body is highlighted but I can't connect the other objects. I realize the Armature is only above the body layer and all the other layers are on top. Drag Armature layer to top. Still no luck. The bone just doesn't care about the other objects.
This is my ideal workflow so I'd love it if anybody could tell me what I'm doing wrong here. Should I make all the elements into MovieClips? That hasn't worked when I've tried it. Should I import differently? Should I make the entire character into a movieclip and then rig the instance on the stage?
I'll be exporting it to PNGs at the end, so I don't need it to be robust down the line.
I get other errors with other importing methods too, but I can't recall them ("Can't connect...something" when using a PSD). But like I said: Illy to Flash is my ideal.
Thanks in advance!

Hi Brian,
There are two ways of dealing with bones. You can either connect bones to a single shape on a layer. Or you can connect bones to multiple movieclips. The bones will link the movieclips together and put them all on one layer if the movieclips are on different layers.
Shape cases are good to use if you wish to morph the shape during animation. This is really useful if you have simple shapes.
For more complex shapes (shape with lots of control points), it is best to convert them to movieclip.
You can read more about bone in the Adobe help docs:
http://help.adobe.com/en_US/flash/cs/using/WS58BD3A02-DA25-488f-B534-AE5463A24833.html
Q

Problems with Importing / Exporting Keywords and Meta Datas

Hi to all!
I recently upgraded to Aperture 3 and upgraded my referenced library.
Today I opened the Keyword HUD and noticed some keywords splattered in my list, which seem to be any older ones, since the new numbering indicated that they are not applied to any pictures.
So I deleted them.
Than I noticed the <Imported Keywords> folder, opened it, and it contained also a large number of previous keywords. Also they seemed not to be in use, so I also removed them.
Than I locked the Keyword HUD.
Now my question: If I export a version, with the option for 'include metadata' ticked, and edit the version than in Photoshop, and after it, import it back into the Aperture library I do have the problem.
I have tried 'Import Meta Datas' and and click 'Append'. Than it is recognizing the former keywords, which I would appreciate, but not as 'Imported Keywords'.
If I would open the file w/ the External Editor and return it back, I guess I would not have this problem. Usually I do open the referenced RAW file, and import than the edited version back into Aperture. Keywords are stored in the Library, so I would not avail the former given keywords than, is that right?
By the way are the keywords part of Meta Datas or not?
Are there any workarounds?
And had other people also problems with their keyword list after upgrading?
Thank for any ideas / infos!
Michael

Added header to CSV and to Code
$ImportFile = Import-Csv "C:\Users\username\Desktop\Scripts\Powershell\Epic\SCCM CI\Tags.csv" -Header Computer
foreach ($Computer in $ImportFile){
$path = "\\$Computer\c$\Epic\bin\7.9.2\Epic Print Service"
$xml = select-xml -path "$path\EpicPullService.config.xml" -xpath //EpicPullService//Cleanup | Select -ExpandProperty Node
if ($xml.ArchiveHours -eq '12' -and $xml.DeleteHours -eq '120') {
$Compliance = $True
}Else{
$Compliance = $False
} "$Computer","$Compliance" | Export-Csv "C:\Users\username\Desktop\Scripts\Powershell\Epic\SCCM CI\Results.csv"
Results:
select-xml : Cannot find path '\\@{Computer=SW1412-16985}\c$\Epic\bin\7.9.2\Epic Print Service\EpicPullService.config.xml' because it does not exist.
At C:\Users\username\Desktop\Scripts\Powershell\Epic\SCCM CI\Check_PullServiceXML.ps1:4 char:8
+ $xml = select-xml -path "$path\EpicPullService.config.xml" -xpath //EpicPullServ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (\\@{Computer=SW...vice.config.xml:String) [Select-Xml], ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.SelectXmlCommand
If it is not a CSV file then just get it with Get-Content
Get-Content C:\Users\UserName\Desktop\Scripts\Powershell\Epic\SCCM CI\Tags.csv |
    ForEach-Object{
        $computer=$_
        $path ="\\$computer\c$\Epic\bin\7.9.2\Epic Print Service\\EpicPullService.config.xml"
¯\_(ツ)_/¯

Issue with IMPORT/EXPORT to database INDX

There is an include program 'MMCP6F02' in which the user exit 'ZXSOPU11' is called and this happens soon after the below code which passes a table to INDX..
      EXPORT CE_SXYZ TO DATABASE INDX(BB) ID 'PDATA'
                         USING INDX_LIS_EXPORT4.
In the user exit, I am trying to read the above table entry with the following code
      IMPORT CE_SXYZ = IS_SXYZ_U FROM DATABASE
                       INDX(BB) ID 'PDATA'.
But this does not seem to fetch any data even though the declarations are the same. But when the same IMPORT is used again in the include program, right after the call to user-exit, it fetches the values.
IMPORT CE_SXYZ = IS_SXYZ_I FROM DATABASE
INDX(BB) ID 'PDATA'
USING INDX_LIS_IMPORT4.
Can someone please help me out to solve this issue?

I have an open OSS-Call at the Moment regarding this issue. SAP wants to make me believe that the coding in SAP Note 703770 would help, but it does not.

HT4759 I just got a new macbook pro and I would like to have all of my contacts from my iPhone 4s imported. I have iCloud turned on on both devices but the contacts are not importing what am I missing

For some strange reason my contacts are not populating on my macbook from my iPhone. I have iCloud turned on on both devices and I have selected the contacts folder to be in the cloud but my macbook isn't populating the data.

To copy your exchange account contacts to iCloud, do the following:
Go to Settings>iCloud, turn Contacts to Off, choose Delete from My iDevice when prompted (any iCloud contacts will still be in iCloud).
Download the app My Contacts Backup. (If you have more than 500 contacts to transfer from our exchange account you will need the “Pro” version. If you aren't sure, start with the free version. When you use it, it will tell you if you need the paid version.) Use the app to back up the remaining contacts on your phone (from your exchange account) as a vCard attachment to an email that and send the email to yourself. Confirm that you have received the email.
Go to Settings>iCloud and turn Contacts back to On.
Go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section) and set this to iCloud.
Go to Settings>Mail,Contacts,Calendars…tap your exchange account and turn off contacts syncing.*
Open the My Contacts Backup email and tap the attachment to import the exchange contacts back to your device, and to iCloud. Go to icloud.com to confirm that the contacts are there. If you ever want to "refresh" this with your current exchange contacts, you can reply to this conversation in the future and I can give you the steps to do so.
* You could leave it turned on if you want to reference it occasionally. If you do, just open contacts and tap Groups, then tap the exchange account so it is unchecked and tap Done. That will hide them from view so you don't see duplicates.

Where can I find the co area with a gl account

Hello group,
I want to check the input fields for a program where co area (KOKRS) and gl account (SAKNR) both are obligatory.
But I want to check if the gl account and co area match.
Is there a table where I can find the fields together or a function module to get the co are for a gl account?
regards, Léon Hoeneveld

Depends from where you looking..
One..
1) Get chart of account from SKA1 for your GL account from SKA1
2) Get controlling area for chart of account from TKA01.
Another way
1) Get company code for glaccount from SKb1
2) Check company code and contralling area assignment from TKA02

Writing to the DOCTYPE area with Import/Export client

Similar Messages

Maybe you are looking for