WRK54G dies every 3 days. Why, and even more important, can I prevent it?
I have a WRK54G wireless router, and every three days exactly it doesn't work anymore. The lights are still on, but no one's home
I can't even ping it, it times out, and the only solution is to unplug it, wait 2 or 3 minutes, plug it back in, and let it start up.
Then everything works perfectly, but the same problem happens in 72 hours.
Why could this be happening? And how can I stop it from happening?
Thanks in advance
ensure that you are using the latest firmware, and also consult your ISP to see if they are changing your IP every 3 days or what ?
Similar Messages
-
Weather day is one day slow and even though it is pass midnight it still shows the yesterday's weather. Could any one help? Thanks. I phone 4
Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
I store different channels in a TDMS file.
I like to have a time channel at the first position with group index 1 and number 1.
When I read the TDMS file with DIADEM the time channel (Float64) is on a differernt position, and the channels are not sorted alphabetically.
Here are my questions:
How does DIADEM import TDMS files?
How gets every channel his number and groupindex?
How can I determine which channel has which groupindex and number?
Best regards
JoergHi Jörg,
i suppose that you´re programme whose create the *.tdms file is writing on false position. Try to create datas with timechannel on first indes in diadem, then save it and then open it again. you see that all is correct. So please tell me what programm in what version do you use and please attache it here.
Did you use the library for creating *.tdms files like in the link ?
http://zone.ni.com/devzone/cda/tut/p/id/6471
Here you find the gtdms_8.x.zip - when you extract it and opened the *.llb you find vi´s for all functions e.g. writing 2d array of strings to *.tdms file
when you open the subvi´s then you see how created and writing datas/structure to *.tdms files. Because *.tdms is binary you can´t see structure with open it in editor.
When you don´t have Labview you can use the 30 days test of current version 8.5 under following link
german version download link
https://lumen.ni.com/nicif/d/lveval/content.xhtml
english version download link
https://lumen.ni.com/nicif/us/lveval/content.xhtml
Hope it helps
Best Regards -
Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!
4) When my computer crashes, once it starts again, it says "repairing" ... but I am not familiar with reparing permissions -- can you explain how I might do that?
If you are running OS X Lion, then you can restart your computer and then press and hold the 'Option' key immediately after you hear the start up 'gong' (usually heard when grey screen shows as it restarts).
You should see at least two Disks to choose from. Choose 'Recovery Disk' and wait for it to load, then choose 'Disk Utility' option in the Utilities dialog.
Once Disk Utility loads, do the following:
1 - In the left hand pane, choose your system partition (usually called either 'Macintosh HD' or 'Macintosh SSD'). Note - don't choose the actual hard drive listed above the partition when using Disk Utility in OS X Lion as this doesn't offer options for repairing due to it including the Recovery Disk you have loaded in memory.
2 - Click the 'First Aid' tab
3 - Click the 'Repair Disk Permissions' button in lower portion of main pane and allow to complete. Ideally, you will get a final message in main pane saying Disk Permissions are repaired.
4 - At lower right of same pane, click the 'Repair Disk' button and allow to complete. Ideally, you will get a final message indicating that Disk Repair is completed and all appears to be good.
5 - Quit Disk Utility > Close Utilities dialog window > Click 'Restart' button (confirm as needed).
You should boot straight into the system partition when complete.
Note - any red text in the main pane text while running the repairs will be issues and you will need to follow the advice given or post back.
If you are running Snow Leopard; then (as David mentions) boot from your first OS X reinstall disc and run the Disk Utility the same way; except you select the actual hard drive listed at top of left pane (not the partition below it). This is because Snow Leopard does not use a 'Recovery Disk' partition and repairs can be run on the HD or SSD itself.
Hope that helps. -
My IPAD (original version) is deleting everything over 30 days from my calendar. How can I prevent this and how can I get back the deleted events?
You are most welcome
-
There is no consistency when one gets the Mozilla Firefox Start page.There is a line as follows :
Web Images Maps News Shopping Books more
To get Gmail one has to click on "more" which gets one a dropdown menu which ends in "even more" Clicking on this takes one to a page headed "Even More Google Products", including (Hurrah!) M Gmail.
Click on this and one gets the page where one signs in, even though I have ticked the box entitled " Stay signed in" and at last ones's e-mail page turns up. Very occasionally, instead of Books or Shopping on the Start Page "Gmail" is there which when clicked on takes one directly to one's e-mail.It seems a hell of a rigmarole just to get one's e-mail!You can set Firefox home page to one of your choosing, see [[how to set the home page]].
If the keep me signed in option is not working, you may have a malformed cookie. Try deleting Google/Gmail cookies, for details on how to do that see [[deleting cookies]]. -
IChat AV 3.1.9 Keeps Wanting Setup at startup every few days--Why?
I have three Macs and all are setup using mobile accounts so that my data on each machine is pretty much identical; however, my office machine does not have an iSight for video chat, whereas, my home and laptop both do. My User/Library does not sync, but everything else does. Any ideas why iChat AV wants me to run setup every few days?
What does happen when you try to synch the Library ?
The Library has a Sub folder for Preferences.
It hold amoungst other things the iChat .plists Removing all of these will get iChat to Redo the Start Up Screens.
8:17 PM Saturday; April 19, 2008 -
I want to accumulate rain for the day, month and year; What formula can I use?
I want to accumulate rain for the day, month and year; What formula or expression can I use.
I am using a Rain Wise product that converts pulses to an analog value. The Rain Wise device can be
set to measure up to 1", 5", or 10". I will be setting the unit to 10 inches in increments of 0.01 inches.
What I would like to do is everytime the signal increments I would like to count it as 0.01 then after reaching
a period of time whether it be a day or a month reset back to zero.
Need some advise on this problem.
Solved!
Go to Solution.Hello Ryan,
Lookout gets a Modbus over Ethernet signal which originates as a 4-20mA input to a Moxa Ethernet I/O Module (E1240) in the field. In Lookout I created a ModbusEthernet Driver and a tag which scales 0 - 65534 RAW to 0-10 Eng. [0 - 10 is inches of rain] Also, another piece of information is that after the rain gauge maxes out at 10 inches it will zero out and start over.
I though the accumulator was time based and took a sample over a specific time period, for instance, one sample every 30 seconds then accumulate. If this is so then if I have 5 inches of rain and then it stopped raining, then 30 seconds latter it would sample, it would see 5 inches and add that to be 10 inches when actually it had only rained 5 inches.
I really need some help with this process,
David Lopez
City of Corpus Christi -
I would like to see even more import options
Say you have 3 different shoots you're importing at once, and they are all shot on different days. As it stands now you can put them in different folders or in the same one if you like, and even rename the folders.
What if you can rename the not only the folders but the photo names as well as you import them based on the folder that they are in.
Like a check mark that says name files the same as the folder.That's a nice addon cor-el, thank you. It does not solve my issue but it's a step in the right direction! I love that finally somebody thought at making that window resizable!
-
TS1398 I have to enter my wifi password every single day , why is this ?
Why
Try the following:
Rather than touching your network name to connect touch Other... instead
Enter your network name and security type
Enter your password
See if your network is remembered. -
Best way to save every night a project and one more
I have a typical raid setup. E= 2 0 striped drives and F= 2 0 striped drives.
At the end of a day, what is the best way to offload then bring back in the next morning to keep working?
I have been just offloading via project manager collect files and copy to new location. Does the preview files automatically understand which drive to go to?
I am assuming yes on this even though separate drives.
My next question is this.
We have another machine that I have editors just cut and trim on. It is a single raid setup 0 striped.
When I transfer this over to the bigger machine with the raid pairs E and F it doesn't understand to take files to the preview drive since there was not another drive on the machine it was created on.
What is the best remedy for this setup bring a simple raid project in to a 2 raid setup for further editing.
Just trying to clear this up.
Thank you for your responses. : )
DavidI dont understand why you feel the need to do this...
At the end of a day, what is the best way to offload then bring back in the next morning to keep working?
Apart from the effort involved..I would be worried that errors and corruptions would occur with all the data transfers going on repeatedly.
If the source files are have back ups and you back up your project file...why does this not work. -
W510 is one day old and sucks more than my 3 year old computer
My Thinkpad W510 just arrived yesterday. Everything on it is great (it doesn't really suck as much as my title makes it seem) except for 2 very annoying things (three if you count one USB outlet not being recognized). From the very first startup, whenever I click on the start menu to bring up the list, it will stay open from anywhere to 1-2 seconds to 5-6 seconds before exiting to the desktop without me doing anything to cause it to do this... it happens EVERY time and it is extremely frustrating because I don't even have enough time to launch a program.
Secondly I went to open the Bluetooth program so that I could connect my phone to it and (SURPRISE!) whenever I was lucky enough to have the 5 - 6 seconds before the start menu closed automatically, I would click the Bluetooth program and NOTHING HAPPENS... Maybe I just don't know that the program file is there for decoration while there's some other way that you initiate your Bluetooth. In that case then the joke is on me... But the startup thing is still extremely annoying, and I know that isn't my misunderstanding of anything.
Can anyone help me out with this? Apparently Lenovo's technical support cannot since I called (since I got the extended 3 year warranty then I thought I might as well put it to use within the first 24 hours of owning the computer) and I had to really struggle to understand their techie's broken English, he obviously wasn't familiar with my computer's programming because when he told me to do certain things to get to a certain screen, nothing went the way he said it would. After about 10 minutes of him attempting to help me, he told me to intentionally prevent my computer from starting up properly, made it show me a ton of error screens, and then promptly ended the conversation, leaving me there to reboot and repair the errors...
Through the grapevine I've heard that Lenovo's computers are supposed to be some of the best on the market but this is my second computer with them (I wasn't very impressed with the first one) and I am just becoming less and less favorable of Lenovo as each problem occurs... Very frustrating. Could anyone help me with any of these problems?Lenovo support (for me in Canada at least) is based in Atlanta, so I'm surprised you found a tech with bad English...
Your problems sound like windows problems, not hardware problems -- are you running XP or Windows7? If you google based on your OS, there are threads to be found on slowing down the start menu behaviors. -
i can send emails if i log in throw my internet browser and i can send emails from another network despide BT.i tried everything, i had check the all the settings
every time i try to send an email that what apper
my ports as well are set as they should be
i did visited the apple store and my email worked perfectly there.... can anyone say whats wrong??Hi Pitas123
I am in the UK and had a similar problem. Ii eventually found the problem was due to my BT Home Hub Router. Not sure where you live, but of you are in the UK, this might work for you.
I found this fix below on https://discussions.apple.com/thread/4604180?start=15&tstart=0
It worked for me. If you can't link to the URL, here is the body of the text
There's an issue related to the BT homehub that is providing a hostname that is "syntactically incorrect" for several smtp server.
Here's how you can fix it.
Using your internet browser, go to the address "192.168.1.254
- Follow instructions to reset your password if asked.
- Then go to "Settings", then "Advanced Settings" and "home network"
You will see there all the devices that are connected or that has been connected before. It's gonna be easyer if yout computer is the only one connected.
Your computer should have a name like "unknown-xx:xx:xx:xx:xx ...
Click on this name, chose another name without any special characters, like "macbook" for exemple.
And then click on "apply"
- restart your computer.
That should fix the issue.
Credit goes to vincentfromcork for providing me with the solution.
Hope it works for you. If it does, spread the word ;-) -
Duplicated events on iCal, and even more on iPod calendar
I am using the latest version of Mac OS X Lion and an iPod Touch 2G with the latest compatible iOS update (4.2.1)
I gave iCloud a try, but after syncing with my iPod, I wouldn't be able to create or edit events in my iCloud calendars (which were previously the "On My Mac" Calendars)
I decided to stop syncing iCal with iCloud so that I would be using "On My Mac" calendars that could be modified on my iPod.
I exported each calendar. Stopped syncing with iCloud (which deletes those calendars from my mac) and then imported them within new calendars that were named and organized as I previously had.
However, I started seeing duplicate or multiple event entries on my Mac and on the iPod Touch.
I tried to delete the duplicates from the Mac, and some of them delete, some don't.
It is weird because I have duplicates of the Address Book Birthday calendar too, which shouldn't have duplicated events that cannot be deleted.
Another thing that happens is that in iCal there are events that appear correctly, just one time. But checking on my iPod, I see the same event 7 times!
Please, somebody help and guide me. I am a heavy user of the calendar on both devices and need a fix soon.
Thanks!I have the exact same problem.
Can't figure it out.
It is very annoying and time consuming deleting the duplicate items. -
SQL tooks more time at first and even more thru APP
Hello,
SQL
SELECT *
FROM (SELECT CASE
WHEN 'N' = 'Y'
THEN
ABCDEF_security.mask_data (
SUBSTR (LPAD (ly.MEMBER_name_1050, 6, ' '), 6))
ELSE
DECODE (
0,
0, (MEMBER_NAME_1050),
DECODE (
SEARCH_MEMBERS_PKG.de_identify_MEMBER (
ly.MEMBER_ID,
'400',
'N',
'Y'),
'Y', ABCDEF_security.mask_data (
SUBSTR (
LPAD (ly.MEMBER_name_1050, 6, ' '),
6))))
END
"Name",
CASE
WHEN 'N' = 'Y'
THEN
ABCDEF_security.mask_data (ly.MEMBER_ID)
ELSE
DECODE (
0,
0, (LY.MEMBER_ID),
DECODE (
SEARCH_MEMBERS_PKG.de_identify_MEMBER (
ly.MEMBER_ID,
'400',
'N',
'Y'),
'Y', ABCDEF_security.mask_data (
ly.MEMBER_ID)))
END
"Member ID",
CASE
WHEN 'N' = 'Y'
THEN
TO_DATE ('01/01/9999', 'MM/DD/YYYY')
ELSE
DECODE (
0,
0, (LY.DATE_OF_BIRTH_MEMBER),
DECODE (
SEARCH_MEMBERS_PKG.de_identify_MEMBER (
LY.MEMBER_ID,
'400',
'N',
'Y'),
'Y', ABCDEF_security.mask_data (
ly.DATE_OF_BIRTH_MEMBER)))
END
"Date of Birth",
CASE
WHEN 'N' = 'Y'
THEN
ABCDEF_security.mask_data (
(SUBSTR (
LPAD (
(LY.MEMBER_SEX_1210) || ' - ' || ly.age,
7,
'0'),
6)))
ELSE
(LY.MEMBER_SEX_1210) || ' - ' || age
END
"Gender",
(SELECT ff.sum_ind
FROM IND_LIST ff
WHERE ff.MEMBER_ID = ly.MEMBER_ID)
AS "Flags",
search_MEMBERs_pkg.fn_check_MEMBER_status (
ly.MEMBER_ID,
'400',
NULL)
AS "ACCESS",
ly.MEMBER_ID AS "RealMemberID"
FROM (SELECT DISTINCT aa.*
FROM ( (SELECT *
FROM MEMBER_last1year dr
WHERE dr.MEMBER_ID IN
(SELECT /*+ parallel(rp1, 8) */
rp1.MEMBER_ID
FROM search_auditor rp1
WHERE rp1.Member_auditor_ID =
'400'))
UNION ALL
SELECT dr.*
FROM MEMBER_last1year dr,
(SELECT MEMBER_ID
FROM CONSUMER
WHERE Member_auditor_ID = '400'
AND ( (ERD_IND = 'Y'
AND (SYSDATE
- NVL (ERD_IND_DATE,
SYSDATE)) <= 3)
OR (CSD_IND = 'Y'
AND (SYSDATE
- CSD_DATE <=
(365 * 3))))) cc
WHERE CC.MEMBER_ID = DR.MEMBER_ID) aa
WHERE ROWNUM < 51) LY
WHERE 1 = 1 )
/This SQL is running 2 seconds from SQLPlus, but running through the application (ASP.NET), it's taking more than *2 minutes*
What could be the reason, where do I find that out, and how do I tune. Actually when running at first time it is taking little bit longer about 30 seconds.
Explain plan
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost | Pstart| Pstop | TQ |IN-OUT| PQ Distrib |
| 0 | SELECT STATEMENT | | 50 | 489K| | 869 | | | | | |
| 1 | TABLE ACCESS BY INDEX ROWID | IND_LIST | 1 | 27 | | 1 | | | | | |
|* 2 | INDEX RANGE SCAN | IX1_IND_LIST | 1 | | | 1 | | | | | |
| 3 | VIEW | | 50 | 489K| | 869 | | | | | |
|* 4 | COUNT STOPKEY | | | | | | | | | | |
| 5 | VIEW | | 50 | 2350 | | 869 | | | | | |
|* 6 | SORT UNIQUE STOPKEY | | 50 | 7600 | 12M| 869 | | | | | |
|* 7 | COUNT STOPKEY | | | | | | | | | | |
| 8 | PX COORDINATOR | | | | | | | | | | |
| 9 | PX SEND QC (RANDOM) | :TQ10002 | 31659 | 4699K| | 433 | | | Q1,02 | P->S | QC (RAND) |
| 10 | BUFFER SORT | | 50 | 489K| | | | | Q1,02 | PCWP | |
|* 11 | COUNT STOPKEY | | | | | | | | Q1,02 | PCWC | |
| 12 | VIEW | | 31659 | 4699K| | 433 | | | Q1,02 | PCWP | |
| 13 | UNION-ALL | | | | | | | | Q1,02 | PCWP | |
| 14 | TABLE ACCESS BY INDEX ROWID | MEMBER_LAST1YEAR | 1 | 108 | | 1 | | | Q1,02 | PCWP | |
| 15 | NESTED LOOPS | | 31650 | 3678K| | 429 | | | Q1,02 | PCWP | |
| 16 | SORT UNIQUE | | 47543 | 510K| | 11 | | | Q1,02 | PCWP | |
| 17 | PX RECEIVE | | 47543 | 510K| | 11 | | | Q1,02 | PCWP | |
| 18 | PX SEND HASH | :TQ10001 | 47543 | 510K| | 11 | | | Q1,01 | P->P | HASH |
| 19 | PX BLOCK ITERATOR | | 47543 | 510K| | 11 | KEY | KEY | Q1,01 | PCWC | |
| 20 | TABLE ACCESS FULL | SEARCH_AUDITOR | 47543 | 510K| | 11 | 36 | 36 | Q1,01 | PCWP | |
|* 21 | INDEX RANGE SCAN | IX1_MEMBER_LAST1YEAR | 1 | | | 1 | | | Q1,02 | PCWP | |
| 22 | BUFFER SORT | | | | | | | | Q1,02 | PCWC | |
| 23 | PX RECEIVE | | 1 | 108 | | 1 | | | Q1,02 | PCWP | |
| 24 | PX SEND ROUND-ROBIN | :TQ10000 | 1 | 108 | | 1 | | | | S->P | RND-ROBIN |
| 25 | TABLE ACCESS BY INDEX ROWID | MEMBER_LAST1YEAR | 1 | 108 | | 1 | | | | | |
| 26 | NESTED LOOPS | | 9 | 1170 | | 4 | | | | | |
|* 27 | TABLE ACCESS BY INDEX ROWID | CONSUMER | 9 | 198 | | 2 | | | | | |
| 28 | BITMAP CONVERSION TO ROWIDS| | | | | | | | | | |
|* 29 | BITMAP INDEX SINGLE VALUE | IDX1_CONSUMER | | | | | | | | | |
|* 30 | INDEX RANGE SCAN | IX1_MEMBER_LAST1YEAR | 1 | | | 1 | | | | | |
------------------------------------------------------------------------------------------------------------------------------------------------------------------SEARCH_AUDITOR, --partitioned, it's looking into the right partition.
Any help would be greatly appreciated.
Is that could be a reason to read from the file (For the first time) and subsequently from Memory (I am not sure about this)
Then that should be run thru the APP faster, just thinking ...
Thanks,Once again from the top.
This is undoubtedly not a database issue.
I doubt you can fix it in the database.
You can, however, spend a lot of hours asking questions and poking around if you are a consultant paid by the hour.
But as long as you are looking for something to do here are some that won't fix the problem but may be worth a few minutes of your time.
WHERE 1 = 1Are you kidding? Drop this nonsense. The Oracle optimizer is not brain dead. If it were my database I would also drop the parallel hint like a bad habit.
/*+ parallel(rp1, 8) */Again the Oracle optimizer is not brain dead. Ask for parallel threads that don't exist and the database will just queue your SQL and let it sit there until sufficient resources become available.
Maybe you are looking for
-
Installation problems on MacBook...
My sister's MacBook has been having problems with installations. While at school, she tried to update her system to 10.4.11. The system had some sort of error and got stuck in shutdown. After finally forcing a shutdown, the system wasn't able to righ
-
TDS Certificate item details not displayed in printpreview in qualitysystem
Dear Experts, I have been working on TDS certificate in SAP script and able to display the item details in the developement system. but while testing the same TDS certificate in Quality system the item details are not displayed i
-
Report on Finished goods stock
Hi friends , I got a task to do . Description: "Age Analysis of Finished Good Stock: - Interactive report. Double click on the line item will give the batch wise stock details." Can any one give some more elaborate information regarding this. And ple
-
Dynamic New-Page Command in Smartform
Dear Experts, I have a particular requirement of triggering New-Page after the end of Main window for displaying Terms & Conditions on the last page. For this purpose I have designed 3 pages : PAGE1 - Contains Main window, few Secondary windows and s
-
http://rorymon.com/blog/index.php/app-v-recipe-evernote/ For this one, personally I decided to deploy the application locally to desktop users but this recipe is useful for deploying with RemoteApp or XenApp PLEASE MARK ANY ANSWERS TO HELP OTHERS Blo