WRK54G - Unable to connect wirelessly to Xbox Live on 360

Hi, I recently purchased the Xbox 360 Wireless adapter to use to connect with Xbox Live, because in my new house a wired connection is not feasible. However, when I try to connect to Live, the 360 is not recognizing a wireless network. I know that the WRK54G has not received an official Microsoft Xbox Live certification, but is there a way to use this router to connect to Xbox Live wirelessly? Thank you.

Xbox settings :-
Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2)   On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
   ip address :- 192.168.1.20
   subnet mask :- 255.255.255.0
   default gateway :- 192.168.1.1
Please assign the dns address on the xbox
primary dns :- 4.2.2.2
secondary dns :- 192.168.1.1
6) Please try to test your xbox live.

Similar Messages

XBOX ONE. I have the xbox one and the airport time capsule and cant connect to most xbox live games and zero parties. I have 0 experience in all this but somehow was able to change NAT to open but still wont connect. HELLLPPPP

Okay folks, I need your help out there.
So the nerdy side of me went and picked up the XBOX ONE on release day. Its awesome by the way, BUT..... I cant seem to connect to most xbox live games and absolutely ZERO parties. At first I just thought it was something to do with the xbox itself and would eventually fix itself, but i was wrong. After looking into it on microsoft, i found out that it had to do with my NAT settings on the airport itself. I guess apple and xbox are not compatiable for xbox live and it makes it difficult to have an open NAT setting and is a huge PAIN.
I was able to pinpoint one that the airport time capsule was blocking the IPV6 something or another. Anyways, I unblocked that, and reset the modem and time capsule and jumped on the xbox and now have open NAT settings but still cant connect to multi-player.
Upon further searching, i was told to uncheck the UPNP on my time capsule as well, but have no idea how to find that.
I know it seems confusing, but thats the best i can describe it.
tthanks all

Be a long long time before I see an Xbox One.. but whoever told you to uncheck the upnp in the TC.. tell them their dreamin' .. upnp is not support by Apple in any computer or router, never has been.. Apple deliberately wrote their own version called NAT-PMP to do the same thing.. dynamically open ports at the request of an application or client computer.
So there is nothing like that to uncheck.. and as a matter of interest.. there no box to check or uncheck for NAT-PMP either.. since apple do not believe in end user adjustment of settings.. they simply do not exist.
You will have to manually forward all ports required by the Xbox via the TC. For multi-player games you probably need to open more ports than the standard to allow just xbox live. You will need to check the ports required and open them.
OR
Buy a standard vista UPNP compatible router.. and use that.. and simply put the TC in bridge in the network.
I have not seen posts yet about xbox one.. but there are plenty about xbox and ps3 and the fact that Apple really doesn't give a hoot about games consoles.
This is a good basic post for older xbox.
https://discussions.apple.com/thread/5385065?tstart=0

Unable to connect wirelessly on an Acer laptop using Vista

I have a Windows XP connected wirelessly to my Verizon Router M1424WR, but I am unable to connect wirelessly on an Acer laptop using Vista. The Vista can only connect with Ethernet. It will not accept the WEP key.

#1 Check the level of WEP. Two examples: 64 Bit, 128 Bit.
#2 And check to be sure, if you use a WEP password of Hex or Ascii.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Unable to connect wirelessly to BTHome Hub

I have a ibook G4 running OSX 10.3.9 fitted out with Airport and have recently taken delivery of a BTHomehub, Both my Mac and laptop PC (also fitted out with wireless capability) are unable to connect wirelessly to this Hub despite being able to connect to the NET using an ethernet cable. It appears that there is no wireless signal being transmitted from the Hub, or at least a signal the both computers can recognise. We have contacted the support teams who have been unable to resolve the issue, and have replaced the Hub, guess what same problem.
Has anyone had similar experiences and if so how was it resolved? There doesn't appear to be any real info on the web about this.
ibook G4 Mac OS X (10.3.9)

Duane, The BtHomeHub is a UK device, both the Mac and the PC were purchased and are used in the UK. The hub is configured to detect settings automatically although i have tried all the different channels manually, no joy.
Anyone got any experience of this device or ways to resolve the problem?

Unable to connect wirelessly to home network.

Unable to connect wirelessly to my home network from my MacBook Pro. My Powerbook G4 is connected wirelessly, no problem. However, the MacBook Pro keeps failing. I have tried rebooting both the modem/router and the MBP without success. I have also tried entering in the WEP code several times without success. Need help troubleshooting this. Thank you.

Not a problem. I appreciate whatever assistance you can spare.
I popped an Ethernet cable into the MBP and am downloading the 10.7.5 update. Says it's going to take about an hour. Going to see if that fixes the problem. Seems many Lion users have complained about wireless problems, so it appears I'm not alone.
As far as the other utilities you describe, I can't find anything that fits that description. I have something called AirPort Utility, but when I launch it, the window contains no columns, just a gray window with a globe and a prompt telling me that no AirPort base Stations have been found and that it's searching for one. I see nothing in my Applications or Utilities called Connection Doctor.
Here's hoping the 10.7.5 update remedies the problem. If not, I fear I might have to keep my MBP "tethered" via an Ethernet cable until I can find a fix for this.
Thanks again for your help.

G4+Netgear wireless router+Xbox Live

O.K, I have a G4 connected to a Netgear wireless router, I also have an Xbox that I wish to connect to Xbox Live, can I get the thing working with an Airport Express??
or should I buy the microsoft wireless adapter?(If I could i'd rather buy the express)

O.K, I have a G4 connected to a Netgear wireless
router, I also have an Xbox that I wish to connect to
Xbox Live, can I get the thing working with an
Airport Express??
No, in order to use the ethernet port of an Airport Express (AX) in this manner you need to use WDS and that is not possible with a Netgear router.
or should I buy the microsoft wireless adapter?(If I
could i'd rather buy the express)
The Microsoft adapter will probably work.
iFelix

Officejet Pro 8500A unable to connect wirelessly to Ubee Modem/Router

I recently upgraded to a new "all in one" Ubee Modem Router (Model DDW366) and have spent hours attempting to wirelessly (both using Wizard and entering info by hand) print, but nothing has worked. The only way I am able to print at this time is by printer cable connected to my MacBook Pro. I'm unable to print wirelessly from my MacBook Pro, iPhone and iPad.
HP will not advise me on how to solve this problem as printer is no longer under warranty and Cox Cable who sold me the Modem/Router combo are not willing to assist with this problem.
Can anyone advise me on how to print wirelessly again?

Hello @drlogan0,
Welcome to the HP forums.
I understand that you are encountering problems with getting your Officejet pro 8500A onto your new wireless network.
I would like to help.
i would try restoring the network defaults. This will help erase any 'old' information that may be stuck in the printers memory. I would like to give you specific steps for this, but I am unsure if you have the 8500A, 8500A wireless, or the 8500A premium.
Basically the steps are, go into the network menu, and select restore network defaults.
If you have tried restoring the network defaults already, please review the following troubleshooting documents.
Setting Up the Printer for a Wired or Wireless Network for the HP Officejet Pro 8500A
Printer Does Not Maintain Wireless Connection
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

FF4580 unable to connect Wireless - Windows 8

I have historically used the HP F4580 on XP and Windows 7 but not wirelessly. I have a new PC running Windows 8 64 Bit and am trying to re install the F4580 but would prefer it to run wirelessly.
I have downloaded the software and drivers from the HP website and the printer works fine using a USB connection.
I am trying to convert from USB to wireless using the HP installation and it states my SSID is not available.Even when I type in the SSID it states it is not avaialable. It then tells me the printer I have selected is not connected.
I have added the printer using the mac address to my router as a trusted source.
I have configured the wireless network direct from the device using the wizard and have an IP address for the printer.
The scan print states that wireless is up and running and working ok but I cannot print to it wirelessly. As soon as I remove the USB the printer is unavailable.
I have tried removing the printer and rebooting and reinstalling. I have disabled antivirus and firewalls but still am unable to print wirelessly.
Does anyone have any other ideas or have I missed something really simple.
Thanks
This question was solved.
View Solution.

Hi,
Many thanks to let us know problem solved.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Unable to connect wireless printer

I am unable to connect my HP photosmart 5514 to my router-D link WBR 1310
Wireless Network Test Results show MAC filtering is on. It is not.
Very frustrating as I have 3 other devices connected and yet cannot connect my printer!
Help? Suggestions?

vbriere wrote:
1. yes the router is broadcasting it's network name
2. WPA is in use
3. router is on channel 11 as it has been
still this printer will not connect to my network...!!
any other suggestions?
Reset the printer to it factory defaults. Use WPA2-AES encryption in your router. Try another fixed channel, never 'auto'. Power off both printer and router. Power on router, wait 2 mns. Power on printer and connect to your SSID with your password. Now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

No connection to Marketplace & Xbox Live

Hi,
If I touch the Marketplace or the Xbox LIVE button, the phone just returns to the menu screen. Nothing happens at all. As well as with a WiFi connection as with my mobile data connection. I also checked if my Live ID en phone have the same country (the Netherlands). The live-button also indicates that 1 app needs an update, but again: it just returns to the main menu. If I select Marketplace in the smaller submenu with all apps then the phone just flips back to this page.
In the 'Great Apps' app I can see new apps, but I cannot select any of them to install or to see their details.
The same goes by the way for Music & Videos: that tile also just keeps flipping back to the menu (while Nokia Music does work).
Sounds familiar or any ideas to fix this? Thanks!
Sven van de Riet

Here are some settings which you need to change on your XBOX as well as on your Router. I hope this might solve your problem.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
3) Click on set-up and change the MTU Size to 1452 and click Save Settings...Click on the Status tab and take note of DNS1 and DNS2 Addresses...
4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
5) Also assign the DNS Addresses on the Xbox Use DNS1 and DNS2 Addresses you took note off of the router status tab as Primary DNS & Secondary DNS for the xbox...
6) Turn off your modem, router, and Xbox...Wait for a minute...
7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

Unable to Connect Wirelessly to Printer

Hi all.
Since I had my BT Infinity installed I am unable to connect to my printer Wirelessly like I had previous. I have an Epson SX600FW Inkjet All-in-One Printer. I have the BT Homehub 2.0. How do you configure this hub/router for the Wireless Printer? I cannot see any way of doing this?
Out of desperation, I have even tried to attach my old Router to the Homehub (even replace the BT Hub with it) but got nothing at all. Not even internet connection!
Can anyone help?
BT Infinity (Option 2/Unlimited) - BT Telephone (Unlimited 24/7 calls) - BT Vision (The Whole Lot! inc Sky Sports & ESPN)
Solved!
Go to Solution.

rdec1945 wrote:
Infinity installed yesterday. Works perfectly both with laptop and Wi Fi Blue Ray DVD but will not work with printer which is an Epson Stylus SX425W. I have set up printer ok to run on Wi Fi but it will not print and I keep getting error messages. Spoken to Epson who have been thro the set up, confirmed that all is ok and asked me to print a status check. This says that network is working correctly but "A router/access point channel conflict has been detected". According to Epson, the solution is for the BT Hub to be configured so that it allows any Epson product through it's firewalls, and for MAC address filtering to be turned off. This is out of my league - is there anyone out there who recognises this issue and can help?
Hi rdec1945
I dont use that printer but the epson PX710W.
Have you used the printers on screen menu.
Setup
OK
Network Settings
OK
Wireless setup wizard or even Advanced setup and then WPS Wireless LAN setup, where you use the WPS button on the side of the HH3.
Setting up mine did not involve opening any thing in the firewall or doing anything with MAC address filtering.
[edit] have a look at this post from geaves, again not the same printer but suggests setting it up with ethernet first, I think its post 6.
http://community.bt.com/t5/Other-BB-Queries/Cant-get-wireless-printer-working-with-Home-Hub-3/m-p/29...
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Unable to connect wirelessly to the Internet

I have a Linksys WAG200G connected via ethernet cable to an Apple Base Station.
I can connect wirelessly to the Base Station (as it appears in the Airport Menu Bar) but I'm unable to connect to the Internet.
I can, however, connect to the Internet via my iPhone so it must be something to with the MBP.
I've run disk permissions but still nothing. I've also attempted to connect wirelessly direct to the Linksys Router and that also works okay.

Why do you need the Apple Base Station? The WAG200G is a modem/router. Just connect to it and you should be able to connect to the internet. Connecting to 2 routers has them fighting for giving out IP addresses. Yes you can connect to both but you must disable one of them in their function to provide IP addresses.

Connection speed on xbox live

hi all
been having a problem that only started about a week ago when my wife is on the laptop using wifi my connection to xbox live drops can,t see how this should happen as i,m hard wired to the hub any ideas
thanks

I'm having the exact same problem, When Laptop is running i can no longer stream on my PC or xbox and this started happening around the time Infinity 2 was introduced.
Ports are open and i get a steady 37mbps, however when trying to use http://speedtester.bt.com/ i get a constant
The system is currently busy. Please try again shortly, however if this problem persists, raise the issue with your service provider
No matter when or how manny times i try.

Unable to connect wireless print server while using wireless modem to ISP

Unable to connect an HP Laserjet 1320 thru the JetDirect ew2400 External Print Server to an imac G5 that uses the 2WIRE352 modem for ISP access thru ATT. Either the ISP is connected and works, or the printer works but no internet access. HP (after 1hr 15 min.) said I need to change/access the "infrastructure" in the OSX. Is that correct? & if so, how do I do this? Do I need to hire Apple Tech Support to do this? How much will that cost. I'm ready to send the Print Server back to HP for a refund.

I would post your issue in the Printing & Faxing forum area. More chance for some of the gurus like Greg Sahli to respond.

WRT54GSV4 wireless router xbox live nat help

I need help getting this router to be open nat for xbox live. I have tried everything in the book and i can only get a moderate nat. Could someone help me with this please?

Who is your ISP ? If the ISP is DSL the,you need to convert the modem into the bridge mode to get your X-Box working.

WRK54G - Unable to connect wirelessly to Xbox Live on 360

Similar Messages

Maybe you are looking for