Wrong 5.1 speaker mapping with X-fi on Win7 x64

/Wrong 5. speaker mapping with X-fi on Win7 x64?Hi,
I got the X-fi Platinum connected to my Onkyo SR605 receiver. Digital (spdif) connection works fine, but the analogue 5. setup not.
When I test the speakers in the Console, I only get sound from the front speakers (LF, C, RF), and no sound from the 2 back speakers (LR, RR). (I got no sub connected).
However, when I select 7. speaker setup instead of 5. in the console, the left and right side speakers which are added give sound when click the icon for testing. Now this sound comes from the back speakers (LR, RR)!
I want this sound coming from the rear speakers with the 5. setup selected, and not with 7..
It looks like somehow the software is outputting the wrong channels...
All cables are connected the right way, and I don't want to change the speaker connections on my receiver (which supports 7.). That would mess up the spdif DTS bitstream out, which is working fine. The problem is in the x-fi configuration.
Is it somehow possible to "re-map" the speakers in the software, so that I can just setup the x-fi as 5. WITH sound from my rear speakers?
I got the latest Creative drivers installed, on a Windows 7 x64 system.

When setting up the speakers in Media Center, here's all it asks, step by step:
Select number of speakers (radio button choice of 2 speakers, 5. speakers [which I have selected], and 7. speakers)
Hit next
What type of cable connects PC to speakers/receiver? Single mini-plug [analog](which is what I have selected, since I'm connected through a green, black, and orange miniplug [6 channel direct]), dual RCA [analog], single RCA [digital], Toslink [digital], or Built-in [laptop]
Hit next
Audio test. It plays 6 tones, they're supposed to hop from speaker to speaker and finally to subwoofer. Only the front center, front left, and rear right play any kind of sound during the Media Center Audio Test. Front Right and Rear Left get nothing at all.
Ok, I tried messing with other settings. I noticed in the THX setup console, I have it plugged in exactly as illustrated (orange plug in port closest to AD_LINK, black in the middle, green on the end), and had it plugged in the same way on my Z-5500 receiver (color coded). I unplugged every speaker except the Center speaker, and I clicked the center speaker in the illustration, and didn't get a sound. When I clicked Front left, the Front Left voice came out of the center speaker, being the only speaker that's plugged in.
What do I have to do to make it designate the correct speakers to the correct locatons?
Is there some kind of codec I'm supposed to be using in order for 5. to work correctly? Because at the moment I only have the center speaker plugged in to the subwoofer's center speaker connector, and the orange minijack from the orange receiver port to the correct port on the X-Fi as illustrated in the THX Setup Console, and it's only playing Front Left's sound. Is there a codec I'm supposed to be using, and if so, where do I get it'sMessage Edited by Guanthwei on 0-29-2006 02:3 PM

Similar Messages

Wrong target data after mapping with attribute move

Hi,
We have a load method type Load from Datastream. In the mapping customizing of this method, we have defined a MOVE operation for getting 'Company' from attribute of 'Company code'. This has been working absolutely fine but suddenly its creating some issue. When we are trying to load data it selects correct data from the source BW cubes but in the target it tries to save with companies #. This results in an error messgae whic says....'UCF7036 Target data record ignored; check field Company'.
Note 977138 addresses similar issue but we are on SEM 4.0.
Any idea?
Regards,
SK
*points will be rewarded to helpful answers.

Hi Shashikant,
Instead of using 'MOVE' operator, you can use 'REASSIGNMENT' rule for 'company' to get data from 'company code'.
That would be the easiest way. I configured like that in SEM 6.0. I have been presuming that there are no major differences in LDS between ver 4.0 and 6.0.
Thanks.

No rear speaker sound with Audigy 4 and Vista x64

I recently upgraded to Vista x64. I downloaded the 6.0..24 driver for x64. I also loaded MediaSource for x64. I am using analog 5. surround speakers from Dell. This setup works fine when I boot into XP pro (with the XP drivers), but I only get front, center and Sub in Vista x64. Does anyone have any ideas for this?

Not sure what to tell you, hopefully someone will be able to help. One curious thing though is that according to my Sound properties in Control Panel SPDIF is working on my Audigy 4,
<center>
http://i0.photobucket.com/albums/a7/stormy352/th_spdif.jpg">
</center>
unfortunately I don't have anything that uses SPDIF to be able to test it.
Also have you tried installing the X-Fi drivers yet? Download, extract with Winrar (or whatever you use) and navigate to the Drivers sub-folder and run the Setup.exe there.

Behringer BCF2000 with Lightroom 4 under Win7 x64

I picked up a used Behringer BCF2000 to provide a nice hardware interface for making LR 4 adjustments (8 faders, numerous other controllers, all programmable to Lightroom functions).
I'm running 64-bit Windows 7 and having a terrible time trying to get the BCF2000 running. After many tries, I successfully loaded the USB/MIDI drivers and even got the BCF recognized. But then it all went away and I've spent over a whole day trying to get drivers installed, update the firmware, and restore the factory defaults so I can set the unit to the correct mode for cross-communication between LR and the BCF. Meanwhile I've had numerous crashes and hours tweaking the registry and modifying the startup routine. But don't assume I'm an advanced programmer--I'm not, and I need some plain English help.
I'm looking for others who've successfully navigated this territory. If you're adept with setting up the BCF under 64-bit Win 7, please let me know and I'll formulate my questions to you at that time.
Thanks in advance!
Marc Hoffman
SongbirdPhoto.com

Sounds like a USB issue. What system type and are you using a USB 2.0 or USB 3.0 port? I did a search and found at least one post indicating an issue with USB 3.0 ports. There may also be issues with recovering from Standby or Sleep mode. Try setting your Power Management Sleep mode to 'Never' when using the BCF2000.
http://groups.yahoo.com/neo/groups/bc2000/conversations/topics/3193
This driver may have corrected the issue if you're using USB 3.0:
USB MIDI Driver
USB MIDI DRIVER (V1.2.1.3) for BCF2000 & BCR2000 (94 KB)
Bugfixes:
BSOD removed when device was using USB-3 mode and Logic was started
Audio was distorted in case of heavy midi traffic
Enhancements:
in some early models of BCF2000 a switch from or to LC, BC or MC Mode causes the device to not work correctly if the user does not wait at least 7 seconds after switching off the device before switching it on again. A system message will now pop up saying : “The I/O device is configured incorrectly or the configuration parameters to the driver are incorrect.” In that case just click that box, switch off the BCF2000 wait for at least 7 seconds and switch it on again.
The DLL was removed.

Manual excise map with which purchase order

Dear experts,
Can you tell me which manual excise map with which purchase order ? give me table name and report if you know !
Thanks

Dear Mr. Siva,
Sorry for the late reply, actually I was out of touch from this issue for few days. I am sending you the detail about my configuration----
I have assigned this condition type as following ...
TAXINN     ZA1X     A/R AT1 Quantity based
TAXINN     ZECS     A/R Cess Quantity Based
TAXINN     ZEXP     A/R BED Quantity based
Condition type information
     Control data 1
Cond. class       D Taxes
Calculat.type     Q Commodity
Cond.category D Tax
Rounding rule         Commercia
StrucCond.
     Change which can be made---
Manual entries      C       Manual entry has priority
Still it is not showing the duty at the time of (J1IIN)
It may be I am missing some configuration or wrong configuration.
give me some hints...
thank you
Vijay

EclipseLink Direct Map with Joining mapping issue

Hi EclipseLink Team,
We encountered an issue to map an attribute as Direct Map with Join Fetch enabled in EclipseLink Workbench 1.1.1 (Build v20090430-r4097).
Basically, we have the following data model:
SESSION
SESS_NO (PK),
PARAM_SESS
SESS_NO (FK) (PK),
PARAM_NAME (PK),
PARAM_VALUE
Then we have Session.java persistent entity associated with SESSION table. This class contains Map attribute sessionParameters which we map as Direct Map with PARAM_SESS.PARAM_NAME as key and PARAM_SESS.PARAM_VALUE as value (referenced by PARAM_SESS.SESS_NO = SESSION.SESS_NO).
The described mapping works fine without Joining enabled (both for Lazy and Eager Loading).
But we have cases when we want to get parameters for a number of sessions. And disabling of Joining leads to a number of performed SELECT SQL queries (both for Lazy and Eager Loading) those are bad for performance.
So we have chosen the Eager Loading and set the Join Fetch option to Outer. Then we have got the following:
I see in the log the only SQL query performed: SELECT DISTINCT t0.SESS_NO, …, t1.PARAM_VALUE, t1.PARAM_NAME FROM {oj SESSION t0 LEFT OUTER JOIN PARAM_SESS t1 ON (t1.SESS_NO = t0.SESS_NO)}. This is pretty good for us. This query returns exactly what we expect when executing on the database. But the Map attribute for every session is populated incorrectly: Maps are empty (not corresponding to available relational data).
Could you please let us know if this is a bug, or kind of known issue or we made something wrong? Some hints and proposals would be very helpful and appreciated.
I should mention that for now we want to map all of this for read only purpose.
Thanks.
Best Regards,
Alexey Elisawetski

James,
I've tried both 1.2 release and 2.0 (v20091121-r5847) but received the same result - empty Map.
Moreover, for both versions the following string was absent in deployed XML file:
+<direct-key-field table="PARAM_SESS" name="PARAM_NAME" xsi:type="column"/>+
Therefore, on application initialization I have got an exception: org.eclipse.persistence.exceptions.DescriptorException with message This descriptor contains a mapping with a DirectMapMapping and no key field set.
So I was forced to add the line manually.
This seems buggy to me...
Regards,
Alexey

JSF/ADF - Referencing a Map with Integer keys

I'm generating several ADF input text boxes from a HashMap using Java code in my managed bean. The Map contains Integer keys and String values. Each input text corresponds to a key/value pair.
I'm trying to build a string to bind the text box to the String object, but I'm struggling with the EL syntax for Maps. I know a Map with String keys would look like this:
#{bean.object.map['stringKey']}
But is it possible to specify a non-String key?
Thank you.

Hi,
why don't you try it ? My assumption is that yes, it
will work because Integer objects have a toString()
method
FrankI'm building the binding string in my bean, so Integer's value is inserted, resulting in:
#{bean.object.map[1]}
I don't believe the EL supports this for Maps. At least I wasn't able to get it to work. I also tried:
#{bean.object.map['1']}
This suggest a string '1' which isn't right either. My guess is that it isn't possible, but I'm hoping someone can prove me wrong.
From searching the forum I've read that calling processUpdates() might eliminate the need for the ValueBinding step, but I'm not sure. If I called:
component.setValue(myString);
Then processUpdates() on each component after the form submit, would this get the its text back to the bean object? If so, could the code go in the form's save action method?
Thanks.

Problem with "Building interactive maps with Flex" example

I have been looking at the tutorial by Matt Sheehan Building interactive maps with Flex found at
http://www.adobe.com/devnet/flex/articles/interactive_maps.edu.html
I have downloaded Flash Builder 4.6 trial version and followed the example. I have also copied the source code from the example and pasted that into the file mymodestmap.mxml.
In both cases the application opens a new page in Google Chrome but does not display any map data.
No errors or warnings are displayed when I run the code from Flash Builder.
Although I have got plenty of experience of writing software, I am a total beginner when it comes to developing web applications!
Any ideas as to what I am doing wrong, I have attached the source below.
Cheers
Steve
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx1="library://ns.adobe.com/flex/halo"
                                 minWidth="1024" minHeight="768" creationComplete="init()" viewSourceURL="srcview/index.html" xmlns:mx="library://ns.adobe.com/flex/mx">
          <fx:Script>
                    <![CDATA[
                              import mx.core.UIComponent;
                              import com.modestmaps.TweenMap;
                              import com.modestmaps.mapproviders.OpenStreetMapProvider;
                              import com.modestmaps.geo.Location;
                              import com.modestmaps.extras.ZoomSlider;
                              import com.modestmaps.extras.HandCursor;
                              [Bindable]private var _map:TweenMap;
                              private var _mapUI:UIComponent;
                              [Bindable]private var _initialLat:Number = 40.668903;
                              [Bindable]private var _initialLong:Number = -111.680145;
                              [Bindable]private var _initialZoom:Number = 6;
                              private var _mouseWheelZoomCenter:Location;
                              private var _mouseWheelZoom:int;
                              private function init():void
                                        _map = new TweenMap(mappanel.width, mappanel.height, true, new OpenStreetMapProvider());
                                        _map.setCenterZoom(new Location(_initialLat, _initialLong), _initialZoom);
                                        mapCore();
                              private function mapCore():void
                                        _map.addEventListener(MouseEvent.MOUSE_WHEEL, mouseWheelHandler);
                                        _mapUI = new UIComponent();
                                        _mapUI.addChild(_map);
                                        var zoomslider:ZoomSlider = new ZoomSlider(_map);
                                        zoomslider.x = mappanel.width - zoomslider.width*2;
                                        zoomslider.y = 30;
                                        _mapUI.addChild(zoomslider);
                                        var handcursor:HandCursor = new HandCursor(_map);
                                        _mapUI.addChild(handcursor);
                                        mappanel.addElement(_mapUI);
                              private function mouseWheelHandler(e:MouseEvent):void {
                                        if (e.delta < 0) {
                                                  _map.zoomOut();
                                        else if (e.delta > 0) {
                                                  _map.zoomIn();
                                        _mouseWheelZoomCenter = _map.getCenter();
                                        _mouseWheelZoom = _map.getZoom();
                    ]]>
          </fx:Script>
          <s:BorderContainer id="mappanel" width="100%" height="97%"/>
</s:Application>

Technically, it's Javascript, not Java :) TOTALLY different beasts. I wish they'd never named it Javascript, it's ambiguous. So anyway, on to the point of the whole thing...
If you want quotes in your values, you'll need to write a function to replace " with \", and pass the values through it. So instead of javascript:passBack('#ENAME#','#JOB#','#SAL#'); you would have javascript:passBack(addslashes('#ENAME#'),addslashes('#JOB#'),addslashes('#SAL#'));. That would mean that ABC"DEF"GH would be passed to the function as ABC\"DEF\"GH and your quotes would stay intact. Search around on the internet for more specifics as to how to pass double quotes in javascript by using backslashes.
~Jer

Issue in Color Theme on the map with ADF geographic components

I am facing an issue in bringing up a map using color theme .I can able to bring up a map with color themes using geographic components feature in ADF.
The problem here is 'Edit Color Map Theme' dialog which lists Map Theme in five categories like continents,counties,countries,states_abbrev,states_names.
we had implemented map using Color Theme based on the states_abbrev and found it was working properly.
But after some days we found that the settings we made to work for the map no longer works and resulted in no color theme on the map being displayed on the page.
It was found that the states_names works properly instead of states_abbrev by that time.
But again after some days it didnt work with state_names and we revert back our code to follow state_abbrev so as to get the desired result.
Does somebody know where is the problem and how to approach this issue?

Quick Install is gone.
Database repair doesn't work.
Color coded categories is gone, and as you've discovered Theme colors are gone.
Print to Excel is gone.
Many desktop clients that worked with 4.2 do not work.
It won't work with legacy devces.
and others.... There are lots of complaints about 6.2 scattered around the forums. Personally, the HotSync manager keeps forgetting the connections I've set, and goes to default views.
You aren't missing much of anything, IMHO.
WyreNut
Post relates to: Centro (AT&T)
Message Edited by WyreNut on 02-20-2009 12:18 PM
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

"Invoice History Report "show wrong balance for supplier invoice with USD

Invoice History Report show wrong balance for supplier invoice with USD Currency
After I run this report i see in the last of this report there is difference between the supplier total
USD (Currency ) and the open Balance USD , it is decreased the open balance
for supplier with 2300 USD with out any reasons
bellow is some data copy of the report
======================================================
Supplier Site Total: SAR 34,700.00
Supplier Site Total: USD 39,000.00
Supplier Total: SAR 34,700.00
Supplier Total: USD 39,000.00
Open Balance: SAR 34,700.00
Open Balance: USD 36,700.00
*** End of Report ***
==============================================
please advise me from where can this differenc ( 39000 - 36,700=2300 )COMMING
or it is bug in this report , becuase i compare this report with other report in account payable like
-supplier open balance letter
-invoice register report
-invoice aging report
all this report give me the amount for supplier USD =39000
BUT AGIN FROM WHERE THE SYSTEM DECREASED THE AMOUNT TO 36,700
thanks

Can you try running Create Accounting For payments just before you run the Invoice History Report and re-check .
Thanks

How to add a bing map with pins to a Siena Project

Hi
I just want to add a bing map with the current location and a few nice pins of some nice locations around me. Comming out of a Excel file. Potentially also draw some routing lines into the bing maps.
Any ideas how I can accomplish that goal?
Thank you in advance
wbr.
Joerg

yes you can (there is actaully one on the map, blue square)
The syntax is listed on
http://msdn.microsoft.com/en-us/library/ff701724.aspx
You will however have to build the correct string to included in the image source (which you can do in the source excel or in runtime in siena)
Concatenate is suitable to do that.
http://dev.virtualearth.net/REST/v1/Imagery/Map/Road?pp=47.638197,-122.131378;;1&ms=350,500&key=KEYHERE
the PP indicates the pin actually and the bing map autocenters on that. You have several options listed on the webpage listed above. It's a question of the one fitting you best.
Please note that your bing key is yours so you need to hide it well enough.
Regards
StonyArc

Can i use WebApps to build a Google map with polygon territories instead of points (pins)?

I built a map with Google Maps Engine Pro - http://www.jmbcompanies.com/Services/Mitigation/map.
It showcases territories using a Google map polygon shape. I wrote custom KML to create it. However, with Google Maps Engine pro you cannot create custom hyperlinks. It will link a URL that you put in the data, but you cannot name it or target the parent window, so therefore it opens a new tab for each click to more details. I really want it to open the WebApp detail page for that item within the same window.
So, is there a way to use the BC integrated Google maps technology and show polygons instead of points on the map? I've used {module_webappsmap,20754,a} to place individual locations on a map, but what about territories or polygon areas?
I'm sure that I can create a WebApp to generate the KML for each placeholder. But how do I turn that into a map?
THANKS!!

You can not create a kml file in BC through webapps. Modules do not work in other file types and you do not have server code access to generate a file type of results.
You need to use the google API and do this yourself or you can just use this:
And embed it into a custom field. My Maps

How to lock a specific map with a password in FINDER?

I don't use a password on my mac because you have to fill it out the whole time for ridiculous reasons. But I have one map, with all my financial numbers and invoices, that I want to secure with a password.
How to do that?
I already tried some things but can't figure it out.
Thanks in advance!

not sure what you mean by a map here. if you use a blank admin password (a mistake IMO), pretty much your only option is to create an encrypted disk image using disk utility and put whatever you want protected inside. when the image is unmounted, the only way to mount it is by entering the password you set at the image creation time.

Error in scheduling a mapping with sqlloader ctl file

Hi everyone,
I have been trying to schedule a single mapping which generates sqlloader ctl file. but i get the error
ORA-20001: Begin. initialize complete. workspace set. l_job_audit_execution_id= 20545. ORA-20001: Please check execution object is deployed correctly. ORA-01403: no data found ORA-06512: at "USER7.PMAP_TLOG_JOB", line 180 ORA-20001: Please check execution object is deployed correctly. ORA-01403: no data found
but when i attach this mapping with a process flow it works fine. There is no error.
so my question is in OWB is it a must that we should attach the mapping which generates sqlloader ctl file to a process flow and then schedule it or can we schedule a single mapping which generates sqlloader ctl file and what should be the process to schedule a single mapping which generates sqlloader ctl file?
can anyone please help?
Thanks & Regards
Subhasree

Hi Nawneet,
Any suggestions?
can anybody else also help me in this error???
Regards
Subhasree

Runtime-Error after deploying a mapping with the generated script

For example a very easy scenario:
1. Create a table and a view in a DB-schema, witch ist registered as WB-target-schema with the following scripts:
create view v1(c1) as select 'a' c1 from dual;
create table t1(c1 varchar2(1));
2. Import the table and the view into a OWB-module
3. Create a mapping ‘m1’
4. Drag and drop view and table into the mapping
5. Draw an arrow from the view-column to the table-column
6. Save and close the mapping
7. Mark the mapping in the ‘Design Center’ and klick the ‘Generate’-Button
8. Save the generated script ‘M1.pls’ to file
9. Run the script in SQL*Plus, connected with the target-schema (without using the Control Center Manager)
=> very easy right now ;-)
10. Start the mapping with the following script will produce the following error
SQL> declare
2 v_status varchar2(100);
3 begin
4 m1.main(v_status);
5 end;
6 /
declare
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at "OWB_OWN.WB_RT_MAPAUDIT_UTIL", line 1027
ORA-06512: at "SCOTT.M1", line 2048
ORA-06512: at line 4
If i delete or comment the four WB_RT_MAPAUDIT_UTIL-calls - it work´s fine!
But is this a good advise?
What exactly does the wrapped package ‘WB_RT_MAPAUDIT_UTIL do?
Thanks
jwehner

I just ran into the same problem myself. I used the same technique of saving the generated OWB script to file and then compiling it through sqlplus. When I used the "Deploy" option for the mapping, then the problem went away. So when OWB is deploying the code it seems to be setting something internally that doesn't get set when you simple compile the PL/SQL. I don't know of any workaround to this. I will need it eventually, since I don't want to use the UI to deploy to various test environments and production. Maybe the built-in scripting language is the way to go.

Wrong 5.1 speaker mapping with X-fi on Win7 x64

Similar Messages

Maybe you are looking for