Wrong added host through OAM register

Hi,
Some how one wrong hosts is added (for standy DB) (register) through OAM, for Standby. I want to add the new correct host name for host.
there is a delete option for this. Can we simple delete this host name , or any implication of deleting this host.
please sussgest how to remove this , if we can not remove this from option delete.
Naqvigation:- OAM--Site MAp->System Configuration-->hosts-->other hosts
here we have three options ..edit,delete and online/disable.
or we can change this host name to the correct one.
plese help me to resolve this.
Regards,

Hi,
You do not need to clean FND_NODES or even run AutoConfig (please see your other thread).
Need to remove Wrongly added(register) Host name through OAM
Need to remove Wrongly added(register) Host name through OAM
Regards,
Hussein

Similar Messages

Difference betweek adding node via Sysadmin and adding host via OAM

We have cluster setup at DB node in EBiz 11.5.10.2. After running autoconfig we have to manually add physical host entry in FND_NODES table. We do this via sysadmin > Install > Nodes. But I have seem some difference when we add node via OAM > add new host and sysadmin > install > nodes. Specially if you add host via OAM, it add support_CP value along with hostname, same doesn't happen if you do via sysadmin.
Did anyone know technical difference between these two approach.

Here is the X server backtrace I get when I try to open an image in GIMP:
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x3b) [0x813017b]
1: /usr/bin/X(xf86SigHandler+0x51) [0x80d8cb1]
2: [0xb7fde400]
3: /usr/lib/xorg/modules//libexa.so [0xb7a07f4c]
4: /usr/lib/xorg/modules//libexa.so(exaComposite+0x607) [0xb7a08747]
5: /usr/bin/X [0x8175e5d]
6: /usr/bin/X(CompositePicture+0x19a) [0x815e86a]
7: /usr/bin/X [0x810ef9a]
8: /usr/bin/X [0x811f20d]
9: /usr/bin/X(miPointerUpdateSprite+0x1ac) [0x8118aec]
10: /usr/bin/X [0x8118bd5]
11: /usr/bin/X [0x8145948]
12: /usr/bin/X [0x81691ee]
13: /usr/bin/X [0x809378f]
14: /usr/bin/X [0x8098611]
15: /usr/bin/X(miSlideAndSizeWindow+0x24e) [0x812734e]
16: /usr/bin/X(ConfigureWindow+0xab3) [0x8078763]
17: /usr/bin/X(ProcConfigureWindow+0x9c) [0x808b7ac]
18: /usr/bin/X(Dispatch+0x34f) [0x808c20f]
19: /usr/bin/X(main+0x47d) [0x8071c8d]
20: /lib/libc.so.6(__libc_start_main+0xe5) [0xb7beb6c5]
21: /usr/bin/X [0x8071071]

Need to remove Wrongly added(register) Host name through OAM

Hi,
Some how one wrong hosts is added (for standy DB) (register) through OAM, for Standby. I want to add the new correct host name for host.
there is a delete option for this. Can we simple delete this host name , or any implication of deleting this host.
please sussgest how to remove this , if we can not remove this from option delete.
Naqvigation:- OAM--Site MAp->System Configuration-->hosts-->other hosts
here we have three options ..edit,delete and online/disable.
or we can change this host name to the correct one.
plese help me to resolve this.
Regards,

Hi,
You should be able to correct the host details from this page. I would suggest you fix the hostname (try to rename it first -- provided that the hostname was correct from the OS level as well). If this does not help, remove the incorrect entry and register the hostname again.
Regards,
Hussein

How to set up mail on i phone 5 with an email of "example@email.school.edu" hosted through google?

I have an email just like the title says "[email protected]" and it is hosted through google but I have to go to my school website to sign in to the account. I want to be able to use the mail app and I can't figure out how to set this particular account up with the I phone.

Talk to the IT people at your school

I created an apple Id and added money through my friends bank account.now it's over I want to renew it with my own bank account.but I can do it how to do..? Also I created another apple id and add money.but I cannot do any purchase with this new accowhat

I created an apple id and added money through my friends bank account.now I want add money through my bank account.but I cannot add money with my own bank account.why,?

Have you gone into settings > store > then tap on your apple iTunes I D and change all the bank details from your friends account to your account ?

Unable to modify user password through OAM identity system console.

HI,
I am trying to reset the password of a user through OAM Identity console.
I had logged in through orcladmin(admin), and tried to update the password for users, as well as orcladmin also.
After clicking save, its giving me error "Modify User Entry Failed" and password is not updated in LDAP
Also note that I am able to modify any other attribute of that user like last name, title, firstname etc through identity console.
Its only user password attribute which is not geting updated.
I am user OVD, which is integrated with OID & AD for user store.
Also I tried to set "Access Attribute control" for modifying user password, but that didnt help.
Kinldy suggest if you have came across this kind of issue.
Regards,
Ankit.

HI,
Thanks for the replies.
As my OVD is integrated with OID & AD both, I am picking up the users from OID for update.
Also the SSL is configured betveen OVD & AD, but still AD user password is also not successfull.
Niether of two is working.
I am not able to create a user through Identity System console, as I had not configured workfllow.
I believe for updating user attibute, workflow defination need not to be define.
Also As I had mentioned before, I am able to modify all the other attributes other than user password.
Also Schema is extended properly.
Thanks & Regards,
Ankit

I have an InDesign CC subscription, does that give me free website hosting through Business Catalyst, or do I need to upgrade?

I have an InDesign CC subscription, does that give me free website hosting through Business Catalyst, or do I need to upgrade?

Leopard (10.5) is not available as a download or as a disk purchase from Apple. You may find copies on e-bay for sale.
If your iMac can accept Snow Leopard (10.6), a disk can be purchased from the Apple online store.
Ciao.

Install agent fail (Agent host must be registered before an agent can be installed or upgraded.)

I got the following error with trying to install agent
# java -jar agent.jar -d /u01/avagent/
Agent host is not registered.
Agent host must be registered before an agent can be installed or upgraded. Agent deployment failed.
database firewall ip address is 10.0.0.10 (for management) and 192.168.0.10 (for traffic source)
auditvault server ip address is 10.0.0.11 (for management)
I have 2 IP address on my DB 10.0.0.9 and 192.168.0.9
when i register host with ip 192.168.0.9 i will get the error
but if i register host with ip 10.0.0.9 installation is fine with no error
i want to monitor audit traffic on 192.168.0.9 interface which is for client to access so i need to register host with ip 192.168.0.9

hi Stefan,
this is expected behaviour, or at least it's better to say : in a multi homed system the choice of the network path that is used is determined by the underlying tcp network,
it doesn matter which path the sqlnet connection from agent to AV server takes as long as it is able to connect. Your statement about 'monitor audit traffic on 192.168.0.9'
does not make sense, the agent / collection framework is the part that fetches audit records from secured targets and has nothing to do with monitoring network traffic since
that part of the functionality is done by the firewall component. Anyway if you want to change the nework path you need to use 'route' and force it,
greetings,
Harm ten Napel

Cannot remove non-connected host through webtool

Using OSB 10.3.0.2.0
I am unable to use the webtool to remove an unconnected host.
In the webtool I go to Configure -> Hosts, I highlight the host name I want to remove, select the box for Suppress communication with host, and click remove. I choose Yes for the question "Are you sure you want to remove 'hostname'" and receive the error
Error: can't connect to OB host ausperf20 - No route to host
Obviously selecting "Suppress communication with host" should allow this to work.
Removing the host through the command line still works
obtool rmhost --nocomm hostname
Is this a known bug in the webtool?

Yep there is a bug here, looks like the webtool isn't sending the nocomm option, just the nq
The problem is in 10.3.0.3.0 too.
Internal Bug # 10199325 has been passed to the OSB development team for this issue.
Thanks
Rich

Download Oracle Apps patches with password required through OAM

Hi All,
Could anyone please share the process - How to download Oracle Apps patches with password required through OAM using patch wizard option to the server.
ftp updates.oracle.com is not working in our case.
Is there any option available?
Thanks for your time!
Regards,

Hi,
Please see these docs/threads.
Note: 731257.1 - How to Download Password Protected Patch from FTP Site updates.oracle.com
Whats is the FTP site for Oracle Patches
Whats is the FTP site for Oracle Patches
Regards,
Hussein

HT204406 How can I syncing devices after adding memory through iCloud?

Every time I try to sync my iPod Touches, I am told that I cannot, because there is insufficient memory. I recently added more through paying for more through iCloud. I tried again to sync my devices and was given the same msg.
I apparently have 42G of memory available out of a total of 50g, so I fail to understand why I am told that there is not enough memory.
Can anyone help please? I am a teacher and use my two iPod Touches, my iPad2 and my MacBook Pro with my class so it is important to be able to sync my devices and have them up to date.
Kind regards
Suzanne Spiers

Go to your Contacts on your Mac - if more than one pick the most accurate; delete any contacts you don't want. Select all the contacts, and from the File menu choose 'Export...'>'Export vCard'. Save the resultant file safely: it will be your 'master' list.
Now delete all the contacts from whichever device has the most in it. Sync with iCloud. If necessary repeat with different Macs. The result should be that the deletions sync to iCloud and in the end you finish up with empty Contacts lists everywhere.
Now you can import your saved file to one of your Macs. Make sure you import it under 'iCloud' not 'On My Mac'. Then it should propagate iCloud and any other devices. Keep the saved file at least until you are satisfied that all is in order.

How to protect an application running on weblogic through OAM

I have a requirement where in I need to protect an application (URL/root) deployed on weblogic through Oracle Access Manager.
Here's what I did:
Installed webgate on the Host where the application is deployed.
Configured the webgate on Access System Console.
Configured the policy domain -
a) Mentioned the Resource type and URL to be protected
b) Authentication Type (Basic)
c) Autherization Rules (Anyone can acess)
Issue: When I try to access the application http://<hostname>:7001/myapp
I expect the webgate/OAM to intercept this request and challenge the user with the basic authentication
but the request is carried through and the Home page of myapp is displayed.
Do I need to do some configurations in the webserver (httpd.conf) or deployment descriptors in the application server to get the authentication?
The application above can also be substituted with Oracle Identity Manager, where I'm getting the same result. I'm able to view OIM Home page without prior authentication. I tried protecting with the following pattern <host variation>/xlWebApp
I am new to Oracle Access Manager and looking for some guidance.
Thanks

Hi Joe,
1. Please elaborate step2 or guide me to a link where I can configure reverse proxy from Apache Webserver to weblogic. I think here's where I'm going wrong.
For more details on proxy refer to these links:
http://download-llnw.oracle.com/docs/cd/E13222_01/wls/docs90/plugins/apache.html#119517
OHS to Weblogic Reverse Proxy configuration Problem
After this configuration, won't I be able to access the application /myapp running on weblogic through port 7001 and will I have access to it only on port 80 (web s erver default port)?
You will be able to access the application through 7001, but the request will not be intercepted by OAM. The request will be processed directly by your myApp.
2. I did some reading and found some instructions on using weblogic SSPI plugin. Is this required at all? When is this used?
You can use SSPI Connector if you want to protect the weblogic port. i.e., OAM intercepts the request when you access the application on 7001 port.
Hope this helps
Hrushi

Publishing through Muse and Hosting through Adobe

To begin with if this is the wrong area for this post please point me to where I need to take it or if a mod wants, please move it.
So I bought access to the whole CC suite so that I could learn some new things and expand my abilities but I am mostly just a photographer so outside of Photoshop and Lightroom I don't have a lot of experience, so if I sound ignorant.....well I am.
I started building my own personal site with Muse and if I understand correctly I can host it through Adobe using one of my five free hostings included with my CC sub. (I am still not entirely sure what that means includes) Now I would like to have a forum with it where registered people can post topics, comments, etc. and it can be moderated by myself and anyone I wish to allow moderator status. I read through several help topics and supposedly I can create one with Business Catalyst? All the information I have found seems to be either outdated or doesn't really go into much depth about what I am/need to do to make it work. If someone could point me in the direction of some more updated tutorials, guides, or whatever I would really appreciate it. I don't mind long videos or a wall of text I just need to find some current explanations.
Thank you in advance!

Hi,
A Creative Cloud subscription lets you redeem and launch five free sites, which are web basic in nature. You can use Business catalyst Forum feature, but to use it you need to upgrade the site plan to higher plan.
For a detailed breakdown of what's included in each site hosting plan, refer to this article.
Detailed plan breakdown
To see how the forum works,
User manual
Do let me know if you have any question.

Error in adding host to vCloud Director 5.5.

In our vCloud Director 5.5, we have added vcenter server through which ESXi Host are visible. however while preparing the ESXi host for vCloud Director i.e. installing vcloud agent it stucks in installation and never completes. N/W connectivity is working fine also we did manual uninstallation and reinstalling the vcloud director agent we are getting error message.
Can someone help, where are the logs file getting generated in ESXi Host also how to resolve this issue.

Hi,
Can you please confirm VC and Host Version ? "we did manual uninstallation and reinstalling the vcloud director agent we are getting error message" What is the message saying ? Screenshot would be of great help.
Please ensure that we don't have any running VM's on that host,if VCD fails to place the host in MM,you can manually put the host in MM mode and try preparing.Also keep an eye on below article to check if you are hitting with any such issues.
VMware KB: Setting up a provider in vCloud Director fails with the error: Cannot prepare host
VMware KB: Preparing a host for VMware vCloud Director fails with the error: java.net.UnknownHostException
For log check -- > /opt/vmware/vcloud-director/logs do check for vcloud-container-debug.log,better to 'tail' the log when the host is going through preparation phase
Also do check /var/log/vmkernel.log and hostd logs.

Executing host through a concurrent program to load data

hello all,
Dear Friends, i want to use host command in a concurrent request to load data in a table from a flat file .
for that i wrote one flat file(test_data_host.txt) , one control file(test_data_host.ctl) , one script file(test_data_host_prog.prog)
Finally i made one concurrent program BPIL_TEST_DATA_HOST and saved it as ' HOST '.
i added to my test_data_host_prog.prog file four compulsory parameters ,but during registration in sysadmin -> concurrent-> program -> define ,In parameters window, i had left all blank.(previously, same was running when i made one link from '$FND_TOP/bin/fndcpesr' file using command: ln -s $FND_TOP/bin/fndcpesr test_data_host_prog through telnet.)
During running of the concurrent program it is giving error: The executable file /dev02/CPS/apps/apps_st/appl/ja/12.0.0/bin/test_data_host_prog for this concurrent program can not be executed.
my files data is attached here with:
1) test_data_host.txt file:
Tamojit,1,history
Vishnu,2,maths
Krishna,3,HRMS
2) test_data_host.ctl file:
LOAD DATA
APPEND
INTO TABLE BPIL_TEST_CONTROL_FILE
FIELDS TERMINATED BY ","
OPTIONALLY ENCLOSED BY'"'
TRAILING NULLCOLS
( name1,
class1,
subject,
record_status CONSTANT 'NEW')
3) test_data_host_prog.prog file:
# Parameters passed into program
ORA_USER_PASS=$1
USERID=$2
USERNAME=$3
REQUESTID=$4
#LOGON_STRING='apps/appscps@cps'
#FILENAME=$5
sqlload userid=apps/appscps@cps control=/usr/tmp/test_data_host.ctl data=/usr/tmp/test_data_host.txt log=/usr/tmp/test_data_host_log.log bad=/usr/tmp/test_data_host_bad.bad ERRORS=100000 silent=FEEDBACK <<!
RC=$?
echo "The sql loader exit code for loading Header table is :"$RC
if [$RC -eq 0 -o $RC -eq 3 |http://forums.oracle.com/forums/]
then
echo 'Loading of file table successful.'
else
echo 'Error: Loading of file table has errors. Sqlload return code is '$RC
exit 1
fi
case "$RC" in
0) echo "SQL*Loader execution successful" ;;
1) echo "SQL*Loader execution exited with failure, see logfile" ;;
2) echo "SQL*Loader execution exited with warning, see logfile" ;;
3) echo "SQL*Loader execution encountered a fatal error" ;;
*) echo "unknown return code $RC" ;;
esac
kindly help me with the same to run the concurrent request successfully to load the data .
Thanks & Regards
Vishnu Pratap Patel
([email protected])
Edited by: user649889 on Sep 2, 2008 2:01 PM

Hi Gareth,
I tried the code which you had given to me,but its not working .
Since i am not very competent enough in shell script , so i want to know that is there any other way or do spaces in that code (during writing that code in my bpil_test_data_prog .prog file) can also make the code inefficient to successfully run my concurrent request.
My .prog file is attached for your notice.
# Parameters passed into program
#ORA_USER_PASS=$1
#USERID=$2
#USERNAME=$3
#REQUESTID=$4
REQUEST_ID=`echo $*| cut -f2 -d" "|cut -c11-`
USER_ID=`echo $*| cut -f3 -d" "|cut -c11- | sed 's/\"//g'`
ORA_ID=`echo $*| cut -f4 -d" "|cut -c12-`
APPS_USERNAME=`echo $*| cut -f5 -d" "|sed 's/\"//g'|cut -c14`
#LOGON_STRING='apps/appscps@cps'
#FILENAME=$5
sqlload userid=apps/appscps@cps control=/usr/tmp/test_data_host.ctl data=/usr/tmp/test_data_host.txt log=/usr/tmp/test_data_host_log.log bad=/usr/tmp/test_data_host_bad.bad ERRORS=100000 silent=FEEDBACK <<!
RC=$?
echo "The sql loader exit code for loading Header table is :"$RC
if [ $RC -eq 0 -o $RC -eq 3 ]
then
     echo 'Loading of file table successful.'
else
     echo 'Error: Loading of file table has errors. Sqlload return code is '$RC
     exit 1
fi
case "$RC" in
0) echo "SQL*Loader execution successful" ;;
1) echo "SQL*Loader execution exited with failure, see logfile" ;;
2) echo "SQL*Loader execution exited with warning, see logfile" ;;
3) echo "SQL*Loader execution encountered a fatal error" ;;
*) echo "unknown return code $RC" ;;
esac
kindly have a look over it & help me for the same.
Thanks & Regards
Vishnu

Wrong added host through OAM register

Similar Messages

Maybe you are looking for