Wrong advertised C5380 printer cartridge

Have finally got round to setting up my C5380 HP Photosmart All-in-One Printer, and had to go out and buy cartridges, purchased the 564s which list my printer on the side, to find they are too big to fit in the printer cradle!! Which are the ones that will be the right size when I go back to exchange?

Go to HP Sure Supply to see which are compatible or see the image below.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

How to resolve the "Incompatible Print Cartridge" Message

Hello everyone
Have you ever received the "Incompatible Print Cartridge" message? This can be caused by defective cartridges, dirty cartridge contacts, or using the wrong cartridges for your printer or region. If you get this message after moving to a different country and using a different HP ink you will need to call HP support and have them explain how to change the region of your printer.
If, however, you have not moved and you are getting this message with a new or current cartridge there is quite a bit of troubleshooting that can be done. There is both an article and youtube video to help you through resolving this issue They are both excellent tools to help with troubleshooting. If the steps don't resolve your issue make sure to try a different cartridges as this helps isolate the issue to the printer or the cartridge.
The 'Incompatible Cartridge', 'Incorrect Print Cartridge', or 'Print Cartridge Problem' Message Disp...
Fix an "Incompatible Print Cartridge" Message - HP Officejet J4680 All-in-One Printer
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.
This question was solved.
View Solution.

If anyone has any questions let me know and I will be happy to help. The above video and article is for the Officejet J4680 but there are other version of the article for other printers that may have more cartridges than just two.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Pc2510 Check Right Printer Cartridge/Not Supported/Hourglass Errors

Hello!
If anyone has had success resolving these errors, please let me know, even if it has meant replacing your print cartridge. Thanks!
Error Description:
Original problem: The printer cartridge error message "Check Right Printer Cartridge" is blocking any use of the psc 2510, including scan and nonprinting noncopying functions.
Current problem:Hourglass freeze accompanied by printer sounds (alignment?) which stop, but screen message never advances past hourglass..
Summary of Troubleshooting:
I received an error saying: check cartridge in right stall. Tried cleaning contacts on printer cartridge and printer contacts with distilled water. In process of employing other tactics in online tutorial, I tried unplugging power while the printer was open. Ever since, it just runs through hourglass and printer sound, but does not advance past this screen icon.
Customer Technical Support:
Suggested a semi-reset of # and 6 keys plus unplug and replug or try new print cartridge. When asked if there was anything I could try before purchase of a new cartridge, suggested I unplug and hold power buton for 10 seconds, then replug. (Full description of these at bottom). Upon further research, representative suggested an upgrade.
Hourglass fix attempts employed from forums:
Tried to plug into wall outlet vs. power strip. (Fully plugged in loose connection to brick when noticed was not in all the way.) Reset modem. No results.
What I Haven't Tried:
Have not tried a new printer cartridge until have exhausted all non-monetary fixes.
Full Description of Troubleshooting:
The first error: check cartridge in right stall occurred suddenly after problem-free use.
The contacts on the black cartridge were cleaned but the error persisted.
After disconnecting use for a time, I reconnected last night to troubleshoot printer cartridge error on current Mac machine. Installation was completed successfully.
The same error occurred once setup was complete.
I performed the following:
1) cleaned contacts on black cartridge using distilled water.
2) unplugged power cord (per post in forum)
3) unplugged power cord and tried pressing cancel/left arrow (per same post in forum)
4) cleaned contacts behind black cartridge on printer
5) removed black cartridge, closed machine and got insert black cartridge error (attempt to determine which cartridge was the problem)
6) Even though this message appeared to indicate the black cartridge was the problem (per web support article) I cleaned the contacts on and behind the color cartridge as well.
In the course of all of this trouble shooting I got a second error: "Print cartridge in right stall not supported."
I noticed that the fit is looser than in the color cartridge. I inspected the spring and cartridge area for damage and found none. Cleaned dirt however below contacts on machine.
Also, at one point during the trouble shooting I was able to get to the scan menu but then it quickly reverted to the first error message.
7) Per general support article online, I tried unplugging the power while the lid was opened (as indicated during cleaning of cartridges.) This information was not in the manual that came with my machine. I was hoping this might reset things.
Then I got the third error: a period of sounds of the printer (alignment?) followed by hour glass on screen.
The 2510 appears to be frozen. No buttons like cancel or menu or on button caused any response.
I unplugged it again (this time with the lid closed) and got the same series. A period of sounds like alignment and then a halt of sounds with the hourglass still on the screen.
Customer Service Rep sent the following:
Email 1:
1.      While the printer is powered on, without turning it off, unplug the power cable from it.
2.      Press and hold the # and 6 keys together and while you are holding them, plug the power cord into the printer
3.      Hold the keys for about 30 seconds, while the printer tries to power on, and release the buttons.
4.      If the printer turns off, use the on button to power on the printer, and follow the instructions on the display.
If it still comes up with the same error, I request you to try with a new black cartridge and get back to us with the results.
Email 2:
1.      While the printer is powered on, without turning off the printer, unplug the power cable from it
2.      Press and hold the on button for about 10 seconds and release it.
3.      After about 1 minute, plug the power cord back and try powering on the unit.
The reason I suggested to try with a new cartridge is because whenever the printer powers on, it does a self test to make sure all the hardware components are working fine, which includes the cartridges. So if there is any error with the cartridge, then the printer might freeze if it is unable to determine the cause of the issue or the point of failure.
Email 3:
I did some research and the issue seems more likely with the hardware of the printer.[...]
If the issue persists, get back to us with the information below for upgrade options for your printer.
Forums:
I then tried unplugging from power strip into wall outlet and resetting modem without result. Noticed blue light for wireless connection is no longer on.
Message Edited by allinfun2510 on 05-04-2009 05:46 PM
This question was solved.
View Solution.

I had the same issue with my 7610 (error=print cartridge not installed correctly), and tried some of the listed suggestions - opened up another brand new cartridge - same issue; put the old one back in - same issue. So I knew it wasn't a defective cartridge, but rather something wrong with the spring that supports the cartridge, because it didn't seem to 'click' in correctly anymore. Compared the spring on the black (right) side, to the color (left) side, and saw the spring hanging down. Put it back in place a couple times - still without success - until I looked closer and saw that part of the plastic that holds the spring in place must have just broken off. Tried t a little piece of tape to hold the spring in place, and finally, the cartridge worked - for now. Hope this helps someone else if they're having the same issue. Good luck!

Printer says "Incompatible Print Cartridge"

I have a HP Photosmart D110 series.. I bought it yesterday and when I first started it, it worked fine until I went and registered it.. Now the printer says Incompatible Print Cartridges and refer to status screen on my computer for details. So I logged in and the computer says this "Cartridge(s) are not intended for use in this printer as it is currently configured.
See printer front panel for information on resolving this condition."
SO my question is what do I do since they are both referring back to each other????
Thanks

If you haven't already - call or chat with support. Sounds like the wrong cartridge might have gotten in the box or you might be using the printer in a location HP didn't expect it to go (different country). Possible have your computer set to another country. Supoprt should be able to help you sort it out.
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

HP564 printer cartridges refills

I just purchased the Photosmart 7525 all in one printer. I was wondering if I could have the cartridges refilled at some of the retail outlets tha advertise refilling HP cartridges. Is this recomended to do or not?

Hi,
Normally no, is it still under warranty ? If yes then please don't do that; if No, you can do what ever you like and PLEASE ask them to have full refund if faulty.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Laserjet P1006 Can not get new print cartridge into printer.

HP Laserjet P1006 Can not get new print cartridge into printer. Received two new cartridges from HP. CB435A, 35A are correct numbers for replacement but round part on left side appears too large for channel provided. I can not get the old cartridge back into the printer either. What am I doing wrong.

Hi,
Please use the following instructions to fix:
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
For MAC filter, you have to logon to the router to see.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Need to find compatible print cartridge

Hi!
This is very urgent.
I bought my printer- Photosmart C4280 in Europe and used the 350 and 351 print cartridges. Iam living in Israel now and i had problems to find the right cartridges as it doesnt excist here under the same numbers.
An employee in a media shop found on the israeli HP homepage the right ones and i bought the 140xl and 141xl.
After all, my printer says 'incompartible print cartridges'...
I NEED THE RIGHT NUMBERS! WHICH CARTRIDGES TO BUY IN ISRAEL FOR THE C4280???
Please help me, i have to print a lot by the end of the week!
Thanks for any advice!
Ps: I did a reset already.

Hi,
140 & 141 probably are thr right number but the printer does not know it because it is sold in Europe. Please check the following article and call HP in your area for help, they will show you how to reset thr printer:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02558798
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Print message print cartridge cannot move because of paper jam but the paper jam has been cleared.

My Envy 4502 printer message window says that the print cartridge cannot move and to clear any paper jam obstruction. There was a paper jam and I cleared it but the message "the print cartridge cannot move and to clear any paper jam obstruction" remains there and I cannot remove it or get the printer to print. I tried everythng listed in the troubleshooting section of the help guide in the software. I uninstalled the printer and then reinstalled it which didn't help in the slightest--the message about the print cartridge is still there. I also tried unplugging the printer overnight (to try to clear the memory) and this also did not help--that message is still there. By the way, I can easily move the printer cartridge by hand and I can hear the cartridge moving when the printer attempts to work. I would appreciate any help from anyone to get my printer to work again!

Hi Cat2c,
Welcome to the hp support forum,
Thank you for your query.
Please find steps to remove paper jam.
Hope this helps
I am a HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
Click on Thumbs up if my post helped you.

Print Cartridge Problem: Tricolor - HP Officejet J4680 All In One

I am seriously going to have an anxiety attack. I run a business from home & I HAVE to have a printer. I just spent $50 on new ink cartridges. My printer was working fine for the last week, and then tonight I have this error message:
Print cartridge problem: [Tri Color] . Refer to device documentation to troubleshoot
SO I reset the printer, shut it on and off, cleaned the cartridge and the printer, switched out the new cartridge with the old one ~ same problem. Over and over.
I called HP and they said that since my printer is out of warranty they can't help me unless I purchase a new warranty plan. What horrible customer service. This printer is a product of HP and I should be able to get help regardless of when the warranty expired.
This is so frustrating. If I can't get help, I think I would rather buy a new printer of a different brand instead of paying for a warranty after I just spent 50 bucks on ink. GRRR!

The page here has troubleshooting steps that may resolve your issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Laserjet pro mfp m177fw - cannot install print cartridge

I recently purchased my printer, and now I have to replace the black cartridge for the first time.
The graphics on the printer cartridge itself, and the videos on the HP site are not of any help. the directions say to insert the cartridge into the slots and push into the retainer with the other cartridges.
When I slide the cartridge into the left and right slots, the cartridge will not slide down easily. I have to force it and one side will slide and the other will not. I do not want to force it, in fear that I might break the printer.
Is there a more visual graphic somewhere on the HP site, on the internate, or on Youtube, that can help me solve this cartridge replacement issue?

Hi, mxhall,
Welcome to the HP Forum. Sorry to hear you're having issues installing the new black toner cartridge in your LaserJet Pro M177fw.
First of all, you were very wise not to force the cartridge into the slot. Doing so could damage the printer and the cartridge.
Please take a look at the document at this link:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03922339&lc=en&product=5445914&tmp...
Hopefully, it will resolve the issue.
Also, as you're inserting the cartridge into the printer, make sure that both ends enter their respective slots at the same time. If the cartridge is tilted even a little, it can make it hard to push the cartridge into the printer.
Thanks, mxhall. Hope this helps.
rumack
I work on behalf of HP.

HP Officejet Pro L7590 - printer cartridge door clasp broken

The plastic clasp on my printer cartridge door broke. The printer thinks the door is open and will not print. What can I do?

Hello Lacanz,
Thanks for the post. With this one, I've included a link below to access the HP Parts store. Here you can access replacement parts and order either by phone or on line. I did check this one for you and good news!, they are available and in-stock now. Good Luck!
HP Parts Store #: 1-800-227-8164
Part number: C8187-67304
Description: Pen Cartridge Access Door
Price: $13.84
Link: http://h20141.www2.hp.com/Hpparts/Search_Results.aspx?mscssid=ED4C7BE2C6FD442C973E7438D23B7FB8&Searc...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

K8600 Printer Cartridge Failure: Printhead or Sensor??

I have an Officejet Pro K8600 that ejects the print cartridge, cartridge light flashes, when I print. The supply levels say 80-100%. This happens even with a new cartridge. The diagnostics say the printheads are "good." I cleaned the print heads three times. All printing (when it does print) is clean and crisp, with no lines. HP support says I need to replace the printheads (yes, they are expired, but print quality is excellent). Office Depot rep says the print sensors are bad and motherboard needs to be replaced (actually says printer needs to be replaced, as it's not worth fixing). I love the printer (when it's not acting up) and speed and print quality is great. I don't want to pay $150 for two new printheads if this is not the problem. So, if print quality is fine, and cartridges are being ejected automatically in the middle of printing, is this a printhead problem or sensor problem? Thanks for any insights you might have on this....not ready to buy a printer for one that is only 2 years old.

Hi there,
This can usually be resolved by cleaning the printhead thuroughly. Check this article out which may help.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP C4180 All-in-One Printer cartridge access door problem

It says my printer cartridge access door is open, but it is not. I've reinstalled the ink cartridges & unplugged printer to try to reset, still no luck Any suggestions?

Hello there again;
This is part of this article GO HERE specifically step eight. Ok try this;
If the product is turned off, press the On button ( ) to turn it on.
Unplug the power cord from the back of the product.
Press and hold OK and the Cancel button ( ) while plugging the power cord into the product.
Continue pressing and holding the buttons until the product turns off.
Press the On button ( ). OOB NVM Reset displays on the control panel.
Print a self-test page
Press the Setup button ( ).
Press the down arrow button ( ).
Press the right arrow button ( ).
Press OK .
Let me know the outcome and will keep doing my best to help you.
Hope this helps;
RobertoR
And remember . . .
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Refund cost of unopened printer cartridges due to new printer

I had to buy a new HP printer today. Rep said since I had unopened printer cartridges that cannot be used with new printer, I was to contact this site to get refund or ? re: these cartridges.
Case# is [edited Case number by moderator]
Please advise

Hi @time2giveup ,
I have sent you a private message. If you are not sure how to check your private message then this post has instructions that will guide you through the process.
Regards,
George
I work for HP

I received a .pdf document as an attachment to an Entourage Email. It refuse to print on my HP4050N printer which is otherwise performing as advertised. Printing fron the desktop, Adobe 9.4.4 nor Preview won't work. I have a PowerPC G5, OS 10.4.11.

I received a .pdf document as an attachment to an Entourage Email. It refuse to print on my HP4050N printer which is otherwise performing as advertised. Printing fron the desktop, Adobe 9.4.4 nor Preview won't work. I have a PowerPC G5, OS 10.4.11.

I think the file has somehow been corrupted. Can you have the person that sent it to you send another copy?
 Cheers, Tom

Wrong advertised C5380 printer cartridge

Similar Messages

Maybe you are looking for