Wrong amount in VAT Declaration Box Report

Hi,
I am running the VAT Declaration Box Report, but the EU Vat Code (acqusition/reverse) amount doubles up.
I have box number 2 with XX2 box component and XX2 has E2 and E21. The total of the invoices listed shows an amount, but the actual box component XX2 has doubled the amount.The box is on credit side.
Therefore when i look at the report i have XX2 credit amount 70,000 while E2 is only 35,000 and E21 is 0.
The JEs of the invoices post both input and ouput VAT as the code is ticked as being acqusition/reverse, but why is that total different?
Thank you!
Cristina

Hi,
SAP found the issue. You can check SAP Note 1604993.
If there is a new effective from period defined in the VAT Declaration Boxes Setup, the VAT Declaration Box Report will
show total amounts multiplied (according to the number of periods defined).
They plan to fix this in 8.81 PL08.
Thanks,
Cristina

Similar Messages

VAT Declaration Box Report

Hi Experts,
What exactly determines which AP Invoices are included in the VAT Declaration Box Report in 2005?
If we take the VAT code E2 from the Demo company, any Invoices I create are included in the report. If I create another VAT code with the same settings but a different rate, an invoice for this new rate is not being included in the report?
Which option decides whether a VAT Code's transactions are included in the VAT Declaration Box Report?
Thanks
Greig

Answering my own question...
VAT Declaration Boxes window in the Set-up menu

VAT declaration box Question

Hi all,
On the VAT declaration box report it puts in a zero figure for EC Acquisitions which is incorrect so we have to do a purchase analysis report in order to obtain the correct figure u2013 can we set this up so that the figure is correct?
Thank you,
MB

Answering my own question...
VAT Declaration Boxes window in the Set-up menu

Finder reports wrong amount of free space

Finder is reporting the wrong amount of free space on all my drives. It's not from time machine local backups, because I've disabled those. In fact, it's reporting MORE free space than there should be! In all cases, Disk Utility shows the correct amount. (So does the Terminal command df.)
eg:
external 120GB hard drive (USB) - finder says 137.83GB free (more than the drive can hold, nice) - disk util says 70 used 49.9 free... better
external 1TB (firewire) - finder says 276.66GB free - disk util says 783.72 used 216.15 free
internal 120GB SSD - finder says 108.32GB - disk util says 78.6GB used, 40.5 free
Anyway to fix Finder?

I noticed the same problem. I assumed it was from Time Machine's local backups (which exactly account for the space discrepancy between Finder and Disk Utility on my machine). But, as you say, you've disabled Time Machine local "snapshots." I can only assume you deleted the local backups (to free up the space they were using), emptied your Trash and are still showing the discrepancy.

Report RFKOPR10 has to dispaly Net amounts, excluding VAT

Hi, Currently the Report RFKOPR10 is displaying the aging for 5 periods:
                                                                                -Aging 0-30 days
                                                                                -Aging 30-60 days
                                                                                -Aging 60-90 days
                                                                                -Aging 90-120 days
                                                                                -Aging 120-150 days.
and Gross Amount (including VAT).
Now I have to diplay   Net amounts, excluding VAT.
Could you please suggest me the logic where I have to change the program and How can I modify this program.
Thanks and Regards
NTR

> Total Posts: 83
> Total Questions: 59 (44 unresolved)
You will get more and better answers if you follow up on your old posts. It would also help if you assign po1nts to helpful answer rather than just marking them as solved and adding a comment that doesn't add anything.
Rob

VAT declaration in XML - Problem with report RFASLDPC

Hello all,
I have a problem with the report RFASLDPC. We use it to download an XML file that we generated which contains the VAT declaration.
In the report RFASDLPC, there is a FORM named QUELLFILE_PRUEFEN which stop the report and display a message : "Data file FILE_NAME is not correct".
The reason is that QUELLFILE_PRUEFEN checks (for Belgium) that the beginning of my document starts with '000000' (six times zero). But this is impossible for an XML file to begin with '000000'. An XML file must begin with "<?xml version="1.0" ?>" or a least "<".
Here is the code :
FORM QUELLFILE_PRUEFEN.
OPEN DATASET PAR_PATH FOR INPUT IN BINARY MODE.
IF SY-SUBRC NE 0.
    MESSAGE E306 WITH PAR_PATH.        ''Quellfile nicht vorhanden
ENDIF.
READ DATASET PAR_PATH INTO HLP_RECORD.
CASE PAR_FTYP.
    WHEN 'AT'.                         ''ASL Österreich
      IF HLP_RECORD(1) NE 'I' OR HLP_RECORD+46(2) NE 'ZM'.
        MESSAGE A185(FR) WITH PAR_PATH.
      ENDIF.
    WHEN 'BE'.                         ''ASL Belgien
      IF HLP_RECORD(6) NE '000000'.
        MESSAGE A185(FR) WITH PAR_PATH.
      ENDIF.
    WHEN 'ES'.                         ''ASL Spanien
*     IF HLP_RECORD(1) NE '1' OR HLP_RECORD+104(3) NE '349'.
      IF HLP_RECORD(1) NE '1' OR HLP_RECORD+1(3) NE '349'.
        MESSAGE A185(FR) WITH PAR_PATH.
      ENDIF.
    when 'FI'.
      if hlp_record(3) ne '000'.
        MESSAGE A185(FR) WITH PAR_PATH.
      ENDIF.
ENDCASE.
CLOSE DATASET PAR_PATH.
The line :
READ DATASET PAR_PATH INTO HLP_RECORD.
Put the 128 first character of the XML file in HLP_RECORD because HLP_RECORD is defined as :
HLP_RECORD(128) TYPE C
So as I work in Belgium, it is the condition :
WHEN 'BE'.                         ''ASL Belgien
      IF HLP_RECORD(6) NE '000000'.
        MESSAGE A185(FR) WITH PAR_PATH.
      ENDIF.
which is checked. But this condition cleary check if the beginning of the XML is '000000' and if it is not, it stop the program.
I searched for all the SAP notes about RFASLDPC but I found none about this problem.
Did someone else have also this problem ? Did you find a way to solve this ?
Thank you in advance for your help.
Best Regards.
Gregory Pierre.

anyone has an idea ? ...

Periodic Declarations Intrastat reporting.

Periodic Declarations Intrastat reporting. -
The purchase order beeing reported har the following information:
Country of origin (EIPO-HERKL) has the value country DK
Country of destination (RL50E-HLAND) has the value country SE
When running the intrastat report the fields for the above mentioned give the wrong value for country of destination
Country of origin field URSPRSLND gives the value DK (correct)
Country of destination BESTILAND gives the value DK (wrong)
It looks wright when you see it in SAP but it is wrong when it is send via EDICOM to the receiver in SCB.se.
Has anybody had simular problems sending the periodic report of intrastat.

I assume you do Intrastat for country SE.
Is your PO a standard PO or a third party PO?
In a standard PO the Country of destination is not changable and should default from the receiving plant.
You may check the Intrastat record in transaction VEFU if the destination country is wrong in the record, too.
If you see this wrong destination country just in the list, then see OSS note 393569 - Intrastat:List output-Country of destinatn instd of dispatch

Kazak VAT declaration

In Kazakistan, there is the fiscal requirement to show VAT amounts in the VAT declaration based on document date and not on posting date. Moreover, also parked documents not yet posted have to be included in the declaration. Obviously on the next month adjustements have to be traced (changes to parked documents, deletion, ..).
Any idea to suggest???

Hello,
you can find the solution to my question in sap nite 1414411 or under the link http://help.sap.com/saphelp_nw04s/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm
best regards!
Christopher

Multiplying UDF resulted in wrong amount in Total (LC)

Dear All,
I really need your help to solve my problem.
I created two UDF which are Qty (field type is Quantity) and Price (field type is Price). These UDFs appear in document with the type Service. I create a query which is :
declare @Qty numeric(11)
set @Qty = $[$39.U_Qty.0]
SELECT @Qty * $[$39.U_Price.0] As Price
And then I created formatted search in Total(LC) in document with type service using that query.
The problem is, the query sometime result in wrong amount (for example : Qty = 0.5 and the Price = 1000, the query is resulting in 1000 which is the correct amount is 500).
Please help me to solve this problem.
Thank you
Best Rgrds,
Surya A.
Edited by: Surya Anugrah on Jan 7, 2009 10:26 AM
Edited by: Surya Anugrah on Jan 7, 2009 10:27 AM
Edited by: Surya Anugrah on Jan 7, 2009 10:28 AM

Change your declaration of "declare @Qty numeric(11)" as
declare @Qty numeric(19,6)

Total amount and vat value

Dear friends
Wrongly claculating the total amount and vat value in my invoice , so kindly provide me the what are the tablesand fields which gets updated.
Point would be rewarded
thanks

Dear friend
I want to be map it into my print program, kindly help me on this
thnaks

TS1702 I was charged the wrong amount on 3 albums I downloaded. I received an email about special pricing, I downloaded the albums I wanted and was billed for the full amount. How do I get a refund?

I was charged the wrong amount on 3 albums I downloaded. I received an email about special pricing, I downloaded the albums I wanted and was billed for the full amount. How do I get a refund?

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

Exporting BOXI Report to Excel

Hi,
When I am exporting my BOXI report to Excel, formatting is not being exported as is. I had formatted BO report to print in Landscape. When I export to pdf, it working fine,but when exported to Excel, it is not priting in Landscape. Is there any way to overcome this problem..
Thanks,
Ven Men

Hi Ven,
Actually that page size option works only for WEBI documents printing.
When you click on the print button on WEBI which is just next to the save button, it will show the setting you have set in the properties.
So you can directly print the document from here.
If your issue is just related to printing the reports then go for this option, dont export to excel or pdf.
You can directly set the properties and print the report from WEBI itself no need to export.
Hope this helps.
Regards,
Chirag Desai.

VAT Declaration in Spain

Dear all,
I am working on VAT declaration in spain with file created by program RFIDESM340.
We have some points to correct but after searching for OSS Notes I saw nothing...
Can someone help me on following points:
- Date has to be Posting date instead of Document date for some document types,
- If ID key is 2 then do not have country code,
- Where to find fiscal reason?
Thanks for your help!
David

Dear David,
I have been dealing with this same issue for months and must tell you that first thing to have into consideration it is to make using "Vat Date" field possible. The way SAP covers this it is explained on notes 1023317 for ECC releases and 1235415 for R/3 releases, and you must notice that it implies an upgrade to a certain HP.
You can find more information regarding legal changes and their availability in the following link:
https://service.sap.com/globalization, goto the left corner and select Country Information > Select Spain > SAP ERP > Financial and Operations (FI/OP) > Type of solution Legal > Download file

Vat declaration - configuration in erp system

Hello experts,
I configured elster vat declaration in PI system as described in sap note 1293294.
But what I have to configure at erp system? sap note 1293294 only describes that I have to select the Exchange Infrastructure transfer type in transaction FOTED1 in the ERP system (I could not imagine that thsi is all what I have to configure on erp side?).
I could not find any documentation regarding the configuration in erp system? can you help me?
we have PI 7.11 and ECC 6.02 System.
Thanks and best regards
Christopher
Edited by: Christopher Kühn on Nov 11, 2009 4:37 PM
Edited by: Christopher Kühn on Nov 12, 2009 9:07 AM

Hello,
you can find the solution to my question in sap nite 1414411 or under the link http://help.sap.com/saphelp_nw04s/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm
best regards!
Christopher

Anual VAT Declaration Portugal - Anexo L

Hello,
I'm customizing the system for the anual VAT declaration for Portugal, and I have a doubt about the ANEXO_L_M, because the in the tcode DMEE for the Tree Type UMS3 i don't have format tree PT_ANEXO_L_M.
I saw the note 1177103 where one of the manual steps is to upload this tree, but this corrections are already delivered in Support package SAPKH60303, and we have the support package SAPKH60306 installed.
Shouldn't this format tree already been in the system?
Best Regards,

Wrong amount in VAT Declaration Box Report

Similar Messages

Maybe you are looking for