Wrong artwork being shown

This is a rarity. Some songs display the wrong album artwork. I have checked with iTunes to make sure that there isn´t a problem or corruption there and there wasn´t.
Obviously I don´t know how pervasive this problem is as I don´t stare at my iPod5 lovingly all day. Maybe I should

The artwork was attached to songs in iTunes. When I saw the wrong artwork I made a note of the song and then checked with iTunes. The artwork is correct in iTunes. One thing I have not checked to see if the song file has multiple pieces of artwork....The next time I see an erroroneous picture I will make a note and check in iTunes.
I am unsure about the randomness of the problem. I use my iPod when I am working or commuting and I haven´t checked each song as it is played. I did try to do that in the office yesterday and found that the problem is more extensive than I thought. What I haven´t tried is to go back to a problem song and see if the wrong artwork is still being shown.

Similar Messages

Firefighter Log Report-Wrong entries being shown

Hi all,
using SAP FF rel. 5.2 - VIRSANH 520_620 I encountered the same issues
described in notes n°:
- 1064911 Firefighter Log Report-Wrong entries being shown
- 1152284 Firefighter Log Report-Wrong entries being shown with
dates
The solutions described in these notes are not valid for my SAP
release:
VIRSANH 520_620
Does someone know if are available the same corrections for my SAP FF Rel.?
Thanks in advance,
Claudio Orsi

Hi Claudio,
Not sure if this helps any....
We recently upgraded FF 5.2 (520_620) to current SP levels and experienced some issues with the reporting feature
We utilize the reports through the NetWeaver interface and were not receiving correct results; this happened after we went from SP 3 to SP 4
We have backed out the SP4 level to get back to "what was working"; we have an issue opened with SAP and they have identified our experience as a bug and plan on a fix with the next release scheduled for end of June
Are you experiencing report issues using the NetWeaver interface or the backend report tools? What is the SP level you are at?
This information on our experience may or may not be helpfull but anything can be of some value as long as it is mentioned
Jerry Synoga
Ryerson, Inc.
630-758-2021

Wrong face being shown in smart album

This is using iphoto on mac
Why does wrong face get selected in smart album.
My smart album is set to show faces that contain "Griffiths" but I don't want one person with same sir name to show. I re name this persons face to "Griffo" expecting him to now be omitted from album, but his face still shows up. What is going on here please ?
Thanks
George, UK

I rename this persons face to "Griffo" expecting him to now be omitted from album, but his face still shows up.
Have you also changed the full name of the "Face" of the person to a different last name? You can do that in the Info panel.
Or add a second rule to your smart album:
Match all
Face contains "Griffith"
Face does not contain "Griffo".
Have you checked, if not one image in your Griffith Faces stack has been mislabelled?

Wrong artwork is shown for album...

Any place to report this?
I have the Styx Paradise Theater album on CD. The artwork that comes up is the Styx Caught in the Act Live album cover.
A fix for this would also be acceptable...

You could search the Web and copy and paste it into the tracks. Amazon is a good source.
Diane Wordsmith

I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server.

I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server, but this message continues to pop-up several times a day at random intervals. Is there something I'm doing wrong? Or is my computer just having a glitch? Other than that, and a mildly sticking caps lock button, it's working perfectly.
Thank you!

Alright it didn't solve it. Any other suggestions?
I haven't suggested a solution yet. I want to know whether you still get the messages while Time Machine is disabled. Do you? If so, try any or all of the solutions proposed in this thread:
There was a Problem connecting to the...: Apple Support Communities

Planned Order for a Product not being shown

Hi Experts!!
I am an ABAPer and I am new to SAP APO. We are now working on /SAPAPO/PPT1. When clicked on some quantity, all the planned orders existing for that product are being shown with respective quantities. Now, I am trying to create a new planned order for a product through FM BAPI_MOSRVAPS_SAVEMULTI3 by splitting the quantity among the receipts. I have gone through several posts and have written the logic. But the newly created planned order is not being shown in /SAPAPO/PPT1. I can't find it anywhere. Am I doing something wrong here?
Here I explain it with an example. I have an aggregated entry for the month of June with quantity 3000, which is already split under receipts 1234 and 1235 as 1000 and 2000 EA respectively. Now, I need to split it as 1000 EA for each planned order and hence am creating a new plord. I am using same FM for changing plords as well with quantities as 1000. So, now both the receipts are being shown with quantity 1000 and the aggregated value as 2000... and the newly created one is missing. But I need the new one to be displayed and the aggregated should be 3000. Why is this happening? Am I missing something?
I already have posted a query that is related to this total requirement. Change Receipt Quantity for Planned Order in LiveCache . This has the first part of the total requirement. Just provided for extra info, but not related to this issue however.
Please help me out. Your help is highly appreciated. Thanks a lot!!

Hi Srinivas,
With prior experience, i am sure that the BAPI SAVEMULTI3 can be used for Creation & Change.
I dont think,the FM's which you are using, are recommended by SAP. So , try to use BAPI most of the time,as it ensure data consistency.
As you told, order is not flown to ECC, but visible in APO, i would suggest you to check the importing parameters of the bapi, like EVENT CONTROL ( should be '1' ).
and COMMIT_CONTROL(should be 'E').
Also, check your queues after execution of bapi. you should find your change pointer in the inbound queue of R/3 System. Do let me know if you still stuck.
Thanks,
Santosh KB.

HTML file is not being shown properly in the JEditorPane

Hi,
I am using JEditorPane to display an HTML file from the local disk. This HTML file contains the html tables. Now when this file is getting displayed in the JEditorPane, one top row grid is not being displayed in the editor pane. content of the row is there...but the column grid is missing. All other rows and columns are being shown but the first row-column grid which contains the heading for column.
Also when I m printing the content of this JEditorPane using Java Print API then no grid is being printed on the paper. content is coming properly but no table grids. when i have taken the print out of the original html file from the browser then table grids are being printed out properly.
Please do help me out in showing the HTML file in the JEditorPane properly and printing the same.
Many Thanks,
gshankar

Hi,
JEditorPane renders HTML with many limitations.
You can use JDIC for the same. refer: jdic.dev.java.net
But JDIC does not work on windows 98.
Anand

ITunes album artwork - how can I stop iTunes downloading the wrong artwork?

I was delighted to see that in the upgraded iTunes there is a facility to download album artwork using, I presume, much the same methodology as downloading track listings.
While my experience of downloading track listings has largely been OK - save for the odd niggle; my experience of the artwork function has been appalling.
Firstly, any release that is territory specific, e.g. UK only, or compilations, downloads the wrong artwork or no artwork at all. But also, the wrong artwork is attributed for classic albums by established acts. E.g. Genesis' Duke, downloads the artwork for Three Sides Line. Also, I have two Led Zeppelin albums and in each case, the art work downloaded was for the cheesy tribute group DREAD Zeppelin!!
Can anyone from Apple comment on this?
Also, if I manually insert the correct artwork; will this be overwritten if in the future I scan for updated artwork across my music collection? I have 65GB+ music on my hard drive, so that is an awful lot of album covers to get through!
Thanks,
A

Manually added album art will not be overwritten.

Why my tracks are not shown in Album view and Artist view, only Album Artworks are shown???

Dear,
I have not have this problem in the previous version of iTune. As soon as i upgraded it to iTunes 11, it happens.
The problem in here is all my songs, tracks are still here, i can see all of them in "songs view". However, when i change the view to Album View, and click into the Album artwork, there is no track there. When i double click into the Album Artwork, the first song of the album will be played normally.
Same story to the Artist View. Only the Album Artworks are shown and the rest is completely blank.
I have absolutely no idea what is going on here and obviously i am not satisfy with this new version.
Is there any way for me to fix this problem? Please help!
Otherwise i will need to use other software for music playing.
Regard,

Refer this article
The Microsoft.SharePoint.SPFieldCollection.AddFieldAsXml method
http://blogs.msdn.com/b/sharepointdev/archive/2011/01/20/why-do-my-new-list-fields-not-appear-on-the-new-edit-or-display-forms.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

How do I fix wrong artwork?

I have an iPhone with about 1,000 songs, a lot of them are singles and not part of any special album. I spent weeks adding artwork to all of them so when I held the phone upright (portrait orientation), when a song played it always showed the right artwork.
Normally when using the iPhone in iPod Touch mode I hold it vertically in what I call Portrait position. I noticed that when I turned the phone sideways - landscape view - that songs not part of an album did not always show the artwork for that song, or just showed a blank grey screen. One day I decided to go through those songs in the album view in iTunes and add artwork to the ones which had no artwork.
Since then almost all my song artwork has gone down the toilet. In portrait view a certain song will play but shows the wrong artwork. If I check the GET INFO feilds in iTunes the right artwork is there but it won't show in the portrait orientation.
BUT, if I turn the phone to landscape view I see the album covers rotate until the right artwork shows. Have I ruined all my hard work or can I undo whatever I did? I am not fussed about the album view, would much prefer to use the phone in portrait view and see the correct artwork which is still in the data field but just not showing.
I am using latest iTunes with Windows xp, on a 1st generation iPhone. NOTE, the program did not give me the choice of listing my hardware as a 1st gen IPhone so I listed it as an ipod touch, the closest option.
thanks
Kim in Australia

Howdy Kathleen,
It sounds like your iPhone is syncing to your library, but seems to be getting stuck on the last step. I would use the troubleshooting in the following article to help you resolve that issue, named:
iTunes: Resolve USB-related alerts
See if the cable connection at the device or computer has come loose or unplugged.
Unplug the cable you're using to connect your iOS device from the USB port on your computer, and then reconnect it. Then unplug it from your iOS device, and reconnect it.
Remove any third-party battery packs or cases from the device and ensure that the USB cable is connected directly to the port on the device.
If your Lightning or 30-pin cable is connected to a keyboard, display or USB hub, try plugging it directly into a USB port on the computer instead.
Close any virtualization apps (such as Parallels or VMWare).
These apps may interfere with your computer's ability to communicate over USB if they aren't properly configured, or up to date. If this resolves the issue, contact the developer of the app to see if an update is available.
Restart your computer.
Restart your iPhone, iPad, or iPod touch.
If you're using an accessory or third-party cable to connect your device, try using an Apple cable with the device instead.
Update to the latest version of iTunes if you haven't already.
Disconnect other USB devices from your computer, except for your keyboard and mouse. Then, reconnect your iOS device. If the issue is resolved, reconnect the other USB devices one at a time. Make sure your iOS device is still recognized by the computer after adding back each device.
If one of these steps resolves the issue, but it comes back later, make sure you haven't changed how the device is connected. For example, check to see if you plugged the device into a specific accessory, or used a specific cable that reintroduced the issue.
Thank you for using Apple Support Communities.
Take care,
Sterling

My ipad automatically jumps from one app to other. it automatically types things randomly. i dont know what it wrong. Have shown it in a service center. they have done factory reset but problem still persist.

my ipad automatically jumps from one app to other. it automatically types things randomly. i dont know what it wrong. Have shown it in a service center. they have done factory reset but problem still persist.

Likley a defective touchscreen.

PDF Export Options not being Shown

Need to export to pdf again. Last export was for only 6 pages, as a test. Now want to export the entire document. However, only 6 pages are created in the export. No options to revise the pages, are presented.
The iD app is acting strangely, in that many other options are not being shown. Also, on loading a document, there are notes about hyphenation and missing LILO. Beginning to believe I need to reinstall.
Pleae advise best course of action at this point.

before you reinstall, see if trashing the prefs helps. See Replace Your Preferences

When is the next ios update and will it fix/address the issue with photos not being shown in chronilogical order?

when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?

All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
 Cheers, Tom

In My Shared View the inbox tabs like My Tasks , Initiated Tasks are not being shown

In My Shared View the inbox tabs like My Tasks , Initiated Tasks are not being shown :
How to display the tabs in shared views also.
I just wanted to created one shared view that will look like Inbox but filter data for State = 'Completed'

Please update me if you can find any way to achieve this in BPM workspace

Cover Flow showing wrong artwork, Now Playing showing right!

I am going to lose my mind if I don't get this figured out.
I have several files in my iTunes that show the wrong artwork in the Cover Flow. They show the correct artwork in Now Playing, as well as when I go to Get Info. The correct artwork is there, and it is the only artwork there (i.e., there aren't two different images there).
What in the world am I doing wrong, and how can I fix this? I thought at one point it had something to do with marking something as part of a compilation, but I've unmarked anything that was marked as such but it didn't help...
HELP!! Thanks....
Message was edited by: JPH

At some level iTunes sorts & groups tracks on the basis of a bunch of fields, i.e. track no. disc no. album, artist, album artist, sort album, sort artist, sort album artist & the compilation flag. (I think that's all of them.) If you have a bunch of tracks with no album name and marked as a compilation it's probably a good bet to assume they are all part of the same album. In cover flow iTunes only shows one item of art for each album hence the effect you see.
To use the old maxim, +it's not a fault, it's a feature+.
tt2

Wrong artwork being shown

Similar Messages

Maybe you are looking for