Wrong automatic paper tray selection in HP LaserJet M3035 printer.

Hello,
I have a printer (this one http://h10010.www1.hp.com/wwpc/us/en/sm/WF06b/18972-18972-3328064-12004-3328083-2512333-2512337-3435... ) shared in Active Directory by several users (running Windows XP machines). The thing is that no matter how many times I try to set the source paper tray to a specific one, it seems it doesnt apply/store the changes, and it comes back to Auto tray selection (and it always selects tray #1, which is the one im trying to avoid), causing an issue which needs to be solved by hand.
Thanks a lot in advance.

1. Go into your SETUP MENU on your printer.
2. Choose PREFERENCES
3. Choose DEFAULT TRAY.
Try it and let me know what happens, thanks.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Similar Messages

Paper tray selection for copies won't stay

I'm having problems setting the paper tray for copies. I go into settings on the printer LED screen and select Tray 2 for copies, but it doesn't stick. Since I have envelopes loaded in Tray 1, I'm constantly getting "wrong tray" error messages.

Welcome back to the HP Community @marthainalabama ,
I read your post about the problems you have been having with making copies from Tray 2 in your Officejet 8630, and I would like for you to check out the link below and try the suggestions from @TeK_AcE to see if the steps can help! Try copying from Tray 2 afterwards.
OfficeJet Pro 8600 and OfficeJet Pro 8630 Tray 2 missing
Let me know what happens!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Paper tray error message HP LaserJet 1102w

Recently my LaserJet 1102w stopped printing duplex; instead, after printing the first side it gives an error message : Paper tray needs to be filled.
The paper tray is full, but I cannot get it to continue printing the other side, no matter what. This has become a huge problem, even when printing single-sided jobs.
Any ideas?
This question was solved.
View Solution.

Hi,
Once you place the printed pages back in the input tray, try opening and closing the top cartridge access door to rsume the print job and check if that prints the other side.
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How can I control paper tray selection from within a report?

Hello everybody
I need to print out a report (preferably in the PDF format) in which certain pages need a specific paper. I am therefore looking for a way to control the paper tray on per page basis. It seems hard to do even though there must be thousand of people out there with the same need - or please proof me wrong
I really appreciate any suggestions.
Regards from Zurich, Switzerland
Peter Buchmann

doesn't support it right now. it will figure it out what tray if the paper is a different size but that's about it. you have two options, have two printers or no preprinted stationary. Most companies go with two printers.
Good luck,
Ike

Where can I get a paper tray for LW 4/600 PS printer?

My boss has a LW 4/600 PS printer, which has been very reliable. The paper tray broke, however, and he would like to repolace it. Does anyone either have or know where I can find a new or used replacement paper tray to purchase for this printer?

There are many printers that use the same marking engine, and often that means the trays are compatible:
http://www.fixyourownprinter.com/reference/pcr/engine/777
The laserwriter 300 cannot be used in Mac OS X, so you may find them at yard sales and flea markets. You can also post on the forums on that web site and arrange to purchase used parts from their printer junkyard.

Tray selection HP Color LaserJet 5550 PCL 6

I would like to print from trays 3, 4 and 5 and save those settings in a report job. When I pull up the printer dialog box, and go to the source drop down I only see Tray1 and Tray 2 (along with Manual Feed) as options. How can I set the job to print from the other trays?
Judy

This sounds like a driver issue. You mention the printer being PCL6. Can you confirm which driver you are using when the 1/4 page prints occur. My guess is that it would be one of the Gutenprint drivers included with SL and this sort of output can occur when the printer driver is not supported by the printer.
Also, with regards to the Generic, which I assume is the Generic PCL Laser Printer driver included with SL, this by default is set to 300dpi. You can change this print quality setting to 600dpi, which will improve your output, especially the graphics. However this driver only supports black & white printing. So if you want to print in color from the Mac and the printer does not support PostScript, then you should look at installing the pxlmono package.
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/pxlmon o
Note that you will need the pxlmono, Foomatic and Ghostscript packages to use this driver suite.

How can i get out the bits of paper left inside my hp laserjet p1606dn printer from a serious jam?

This printer got a jam last spring, and ever since it continues to get jammed. There is quite a bit of paper that I could not get out using the instructions in the manual. How can I get to it?

I understand you are getting a repeated paper jam message. This document may help you in regards to cleaning the paper from your printer.

Paper tray hp laserjet 1018

It should be simple. I cannot close the paper tray of my HP LaserJet 1018 printer. It is hinged and when I lift it, it moves about 30 degrees and stops. I am afraid that if I force it any farther something will break. How does it close? It was close when I bought it.

@Bobsbob
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Select paper tray

Hello
I'm looking for a solution. My problem is, I have to print one Report on paper tray 2 and one simultaneous on paper tray 3 (As copy) of the printer. I take the procedure PROCEDURE run_report_object_proc(vc_reportobj varchar2, vc_reportserver varchar2, vc_runformat varchar2, vc_other varchar2) IS
v_report_id report_object;
vc_ReportServerJob varchar2(100);
vc_rep_status varchar2(100);
vjob_id varchar2(100);
BEGIN
case :global.sprache
when 1 then --deutsch
v_report_id := find_report_object(vc_reportobj);
when 2 then --französisch
v_report_id := find_report_object(vc_reportobj||'_F');
else
v_report_id := find_report_object(vc_reportobj);
end case;
set_report_object_property(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
set_report_object_property(v_report_id,REPORT_DESTYPE,CACHE);
set_report_object_property(v_report_id,REPORT_DESFORMAT,vc_runformat);
set_report_object_property(v_report_id,REPORT_SERVER,vc_reportserver);
set_report_object_property(v_report_id,REPORT_OTHER,vc_other);
vc_ReportServerJob := run_report_object(v_report_id);
vjob_id := substr(vc_ReportServerJob,length(vc_reportserver)+2,length(vc_ReportServerJob));
web.show_document(:global.rw_servlet|| vjob_id ||'?server='||vc_reportserver,'_blank');
END;
How can I do this?
Thank's for your help
René

Hi Peter
Thank's for your tip. I have looked at my report, but I don't find the property, where I can set 'SRW.Set_Printer_Tray'. Or is it a trigger and who must be this trigger and kind of trigger?
Have you more information for me or an example?
Thank's

Tray selection with LOCL in sapscript

I want to print the document from Tray 2 always and so I set the resource name in the sapscript to TRY02. When I put the printer name in, it works fine and prints from tray 2. But when I put LOCL as the output device, it always prints from the default tray. Does anyone have a solution to this?

I think this is because of your local printer configuration
Please find the documentation related to this-> this documentation i found in start> printer and faxes>select your default printer> right click> properties> help> index --> find tab > type tray> Selecting paper by type or source
If your application supports printing by paper type or source, make the selections from your application. Application settings override printer driver settings.
You can configure the printer to select paper by Type (such as Plain or Letterhead) or Source (such as Tray 1 or Tray 2). If you frequently use several different kinds of paper, once trays are set up correctly from the printer control panel, you do not have to check which paper is loaded in each tray before you print.
Your paper trays must be configured from the printer control panel before you can print by type. To configure your paper trays, see the printer user guide.
a®

Issues with printing all picture formats to the a4 paper tray via eprint

A little mystery which i am unable to work out.
I have recently purchased the hp photosmart plus all in one printer b210 model. The printer has eprint which is enabled and working, the printer has two trays, a standard a4 paper tray and a photo tray.
When i send a letter or standard written email it prints fine to the a4 paper tray. however if i wish to print a picture of any size or type (as i have tried different sizes and file types etc) to the a4 paper tray, it always defaults this to the photo tray and of course as there is no paper in the photo tray it displays an out of paper message.
I have been into the printer prefereneces and changed the tray type both to a4 and to auto - ask me first and both still try to print to the photo tray, looking at the demo for e print it does discuss only photo sized images and standard letters but the demo video shows an actual eprint send to the a4 tray of a different type eprinter for hp.
As a summary i really think that you can be able to send images to the a4 tray via eprint but do not know how. i have changed the tray type on the printer options and also looked at the eprint options on line. the paper default is set to a4 and nothing smaller? what else could be done and is it actually possible for this model i have?
just as an additional note i can print pictures from wireless via laptops and pcs to the a4 paper tray so the issue lies with eprint????
any help is appriciated many thanks
AMD64legend

Currently, if you attach a photo, it will default to the photo tray. The ability to specify photo tray vs. main tray w/attached images is not available yet.
A work-around that provides some fliexibility in this area, is that if you embed your photo into the body of the email, it will print from the main tray...don't put any text into the email and embed the image (so you can see the picture in the email body) and send it to your printer's email.
A limitation of this approach is that images will not automatically fill the page - see my crude "drawing" below of a page w/an image in the upper part of the page as an example of how a print out of an embedded image might appear. Give this a try yourself if you'd like to see how the output looks to determine if you want to make use of this option. You can embed multiple images as long as you stay below the 5MB size limit for each email.
| ___________ |
| | | |
| | image | |
| | | |
| ---------------- |
| |
|____________|
I am an HP employee.

Missing paper tray

I use mac os x 5.4 and has just bought a HP Photosmart C6280 "all in one". When I try to print a picture from iPhoto 08 there is no choice of paper tray. I have the latest drivers and software from HP. The choice of paper tray is in the designated HP printer software but I need it directly from iPhoto. Interestingly enough, HP support says it is not their but Apples problem and asks me to contact run software update on my mac, witch I have done, and then contact Apple support. Any ideas from here will be very welcome!
tellef
oslo

I've got an HP Photosmart D7160. I see you've spoken with HP support, so you've probably been through these steps, but bear with me and let me ask so it is more clear where things have gone wrong.
When I print from iPhoto, first I get a dialog box with "iPhoto" on the top where there are options on the left for borders, etc. Then if I click on the Print box, I get the dialog box with "Print" on the top. To get to the paper tray, I choose Paper Type/Quality from the dropdown button in the middle, and then I get the option to choose "Photo Tray" from the Source dropdown button.
So, is the Source button missing? Or is the Photo Tray option greyed out?

Print menu different since upgrading to Lion 10.7.4. Pop up menu no longer has Preview and lost paper size selection. Photos all printing credit card size. Still using iPhoto 6.0.6. Have upgraded printer drivers.

Print menu is different since upgrading to Lion 10.7.4. Pop up menu no longer has Preview and lost paper size selection. Photos are all printing credt card size and I can't get it changed. (Have tried changing in Page Setup.) Have upgraded my printer drivers, but still no luck. Still using iPhoto 6.0.6.

A slow boot time can be caused by login items.
User Login Items:
    Flux
    NoSleep
    ClipMenu
    Canon IJ Network Scanner Selector2
    BetterTouchTool
    USBOverdriveHelper
    TotalFinder
    Gmail Notifr
Open System Preferences > Users & Groups > Login Items
Remove one login item noted above then restart your Mac to test. It may be one or multiple items causing the slow boot.

LaserJet 1320nw: Selecting an alternate paper tray programmatically

Howdy, y'all,
My question is more about coding than printer administration, but I thought that I'd begin by asking at this forum.
I'm working on the enhancement of an older client-server app that prints three copies of an invoice on color-coded paper. One of the users would like to keep the multi-colored sheets in the lower paper tray. Other users may run the same invoice listing on other HP LaserJets. If the <Esc> sequence that I send to the printer to select the lower tray is received by a LaserJet printer without a lower tray, what will the printer do?
I've read the PCL 5 Tech Ref, and in the Programming Hints section, HP writes that "if ... commands are not supported by the PCL device, they are ignored." Does that mean that printer will still print from the default tray if there's no alternate tray?
Thanks kindly.
André in SoCal, USA.

Thanks for your support-- you are correct Epson did not solve my problem. Over time, none of my several printing issues have been solved by Epson . Self-help and Forums have been my best solutions. Once Again I discovered the answer myself. The menu options have been moved around in Leopard compared to Tiger. In "EPSON PrintCD" you now go to Print..., choose Page Setup and unlike Tiger when you choose "US letter" under Paper Size, pulled down to US Letter, there is now a side menu that pops up and allows you to choose US letter(Manual Feed). This takes care of the CD printing problem. Though I haven't tried it as yet, I think that under this new "Paper Size" menu choosing "4x6 ( borderless)" will solve my borderless printing problem!
Sorry I can't shed any light on your particular issues

Automatic selection of paper tray

I have my printer set up to automatically select the tray with paper, if one tray is empty. It does not work. In the settings on the printer, I have Tray 1 as default, and no lock on. In the printer settings in Windows, it says that the second tray is installed and will auto select the tray. I have also tried Tray 2 as default. If the default tray is empty, and the other tray has paper, it will not auto select and use tray with the paper.
I have also removed the additional try and reinstalled it.

Hey @PirateBird ,
Thank you for joining us on the HP Forums today, hope you enjoy your time with us!
I understand that you are experiencing an issue with out of paper paper trays still trying to print even though the second paper tray has paper in it and is ready to print.
So that I can assist you please answer the following:
1. What Operating System are you using? Press the link to find out, in case you don't know already. http://whatsmyos.com/
2. What printer are you using?
3. Are both trays loaded with standard media?
Look forward to hearing back from you.
I worked for HP.

Wrong automatic paper tray selection in HP LaserJet M3035 printer.

Similar Messages

Maybe you are looking for