Wrong breadcrumbs for pages with same topic

I have built a helpsystem via Robohelp 7.
When I use the same topic for several pages the breadcrumb
gets incorrect.
An example:
The Book titles are: My Account / Create an Account / FAQ
The Page title is: What is metadata
And the topis is: What is metadata
...the breakcrumb is: My Account / Create an Account / FAQ /
What is metadata (nothing wrong here).
But, if I use the same topis for another page:
Example:
The Book titles are: My Account / Account Settings / FAQ
The Page title is: What is metadata
And the topis is: What is metadata
...the breakcrumb is: My Account / Create an Account / FAQ /
What is metadata ("Create an Account" should be "Account
Settings"!!??).
Anyone who knows how to fix this?
Thanks in advance!!!

Hi eliasjosefsson and welcome to our community
In addition to what my fellow Adobe Community Expert Peter
offered, how about a possible workaround?
One way you might work past this would be to create redirect
topics for each page that appears in multiple places in the TOC.
Essentially, you would never truly link to the page directly from
the TOC. Instead, you would link to the redirect topic that would
point at the page.
You might give that a try and see if it works. In thinking it
through as I type this, I can see where it may fail. But you might
try it with one or two pages and see if it works.
Cheers... Rick

Similar Messages

  • The report displays more than 3000 pages with same content.

    Respected Sir
    I have a report with form letter layout.
    The report contains only one page,but while running the paper layout ,the report displays more than 3000 pages with same content.
    please anyone give a solution to this problem

    I think there is no bad joining. b'se when the querry is executed in sql, it is working properly(means returns only one record) . This problem is not for a particular report. Any report using the "form layout", the same problem occurs.
    Why this problem occurs. How can we solve it.
    Bye

  • Hi, face issue that can not activate iPhone but can log in iCloud wed page with same Apple ID and Password after Iphone been update to IOS 8. Need Help. Thanks

    Hi, face issue that can not activate iPhone but can log in iCloud web page with same Apple ID and Password after iPhone been update to IOS 8.1.2
    Also in the iCloud 'Find my iPhone" , no Device been found.
    Been raise this incident, got the Case ID and call to Apple Support but it seems like out of office hour
    Need Help Thanks

    Yes, able to make a call to Apple Support but in the end still keep on going to try the Apple ID and Password.
    And it seems like the iPhone ID  in this device been locked
    May to know is that possible to ask the Apple Technician to unlocked the ID so i could activate the iPhone without log in any Apple ID?

  • Import multiple Word docs to multiple pages with same master page?

    Hi, I should start by saying I have no scripting experience.  However, I am wondering if there is a simple script available for the following issue:
    I have set up a master page with three linked text boxes. Right now, I use Cmd+D to select a word file, and then Shift+click in the first box to place the text on the page. But I have 125 pages that are exactly the same layout, just different Word files to be imported. I could repeat this process 125 times, but I am wondering if there is a way to tell InDesign to create 125 pages using Master Page X and import one file for each?
    I am using InDesign CS5 v 7.0.4 on Mac OSX Snow Leopard v 10.6.7
    Thank in advance for any help you can offer,
    NW

    I was able to import the word documents as long as there was only one text frame on the master page. However, when I created multiple text frames (the text in the word document needs to flow from frame 1 to frame 2), it always imported into frame 2 and skipped frame 1. In case it is helpful to understand what I mean, I attach two screenshots. The first (sans text) is the master page, and the second is Page 1 after running the script. I added the labels Frame 1 and Frame 2 to Page 1, not the Master, because otherwise the text gets imported into the frame with the words "Frame 2". I suspect I have to label the frames in InDesign and then add something to the script that says insert into the Frame 1, but I'm not sure how to do that.
    It wasn't clear from your narrative in June that the text frames were linked, and that the text needed to flow between frames.
    The script, as implemented, only overrides one text frame, (textFrames[0],  which is the top-most text frame in the stacking order), and then places the text in it. Clearly that's not correct for your scenario.
    You mention 3 frames but only mention flowing between 2 frames.
    Anyhow, it sounds like you want the script to override all 3 text frames, and then to place in the first textframe.
    The first is easy, the question is really what should happen when there are more than 3 text frames -- should it override all text frames, or only some. You could specify which ones with a Script Label, or you could do something more clever. For the moment, let's just override all text frames.
    Then you have to specify which one to place into. You could just select the frame you want and Arrange > Bring To Front. Or we could specify frames[2], which should be the 3rd-from-the-top (after frames[0] and frames[1]). I'll do the latter, but feel free to keep the script the same and do the former:
    var
        d=app.activeDocument,
        p=d.pages,
        i, frames;
    for (i=0; i<p.length; i++) {
        frames = p[i].appliedMaster.textFrames.everyItem().override(p[i]);
        frames[2].place(new File("/path/to/page"+p[i].name+".doc"));

  • Bug: Application Express - Multiple pages with same name

    In my APEX application, I have mulltiple pages with the same name (user requirement). In SQL Developer, it shows the pages with the same name under the MAX Page ID. For instance, I have pages 18, 21 and 22 with the name of "Binder". In SQL Developer I see 3 APEX Page entries for Page 22. And it shows all of the page items for Page 22 in all of the entries.
    Thanks,
    Dan

    If I delete extra .ipa files when two different applications have the same name, then I need to keep track of which is the current version of what. "Sudoku 4.ipa" might be the latest version of one program, and "Sudoku 7.ipa" could be the latest version of another.
    I wish Apple would create a naming scheme where every application has a unique name, and sequential generations are not used. This would make it much cleaner, and there would be no ambiguity as to either which program is which, or which version is which.
    I find the safest way to get rid of all the dups is to just delete them all and re-download the app. The bugs in iTunes still make a mess of things, though.

  • Download for free with same apple id?

    Hey,
    I dowanloaded Asphalt 6 for free on my iPhone 4. Now i want to download it on my mac (macappstore). Does it work for free with the same APPLE ID?
    Thank you

    Hello
    just to say iphone app not run into Imac
    use itune to sync and backup your iphone app , i don't think you need to download again from app store
    but i could be on wrong way ? try explain a little bit more what you try to do ??
    HTH
    Pierre

  • Open Vi reference for Vis with same names

    Using VI server, is there any way to open reference to a VI on the hard disk even thought a VI with the same name (but different path) is already loaded in memory? I'm trying to see if it's possible without renaming and making sure every single VI I use has a distinct name.

    abdel2 wrote:
    For now, I can give different names but as the # of modules increases, it will be hard to have some Vis that don't have the same name.
    It wont be tough to keep distinct names.
    Just prefix or suffix your module name to the original VI name, so that you SDs will have VIs with same/similar functionality, but never conflict with each other when called during run-time. This is the procedure we follow in our project currently. We have gone ahead with the extent of packing all the DUT SDs (LLBs) into one complete auto-installer, so that in the target PC, everything get unbundled & installed into the appropriate folders that we have added while creating the installer.
    - Partha
    LabVIEW - Wires that catch bugs!

  • Two deductions for invoice with same reason code posted as one line item

    Hi
    We have a scenario wherein we are taking two or more deductions on the same invoice and are using the same reason code which have a setting of charge off.
    SAP system displays the FI posting with same reason codes with charge off setting as one line item.
    However we want the FI Posting to display separate line items per deduction and not combine amounts of deductions based on same reason code with charge off setting.
    Any comments are appreciated.
    Edited by: Kirti Bhardwaj on Jul 24, 2011 9:46 AM

    Hi,
    you can use different reason codes in distribute differences screen once you have fist selected one reason code for one invoice.

  • How to get Unique calid for users with same name in multiple domain env..

    I found we need to use "-k legacy" option for creating users in non-hosted setup..
    I had two domains default as xxxx.com and the one that I created as yyyy.com
    When I have users with same name in two of the domains as user1..
    The calid for both of them is... user1 ....so they share the same calendar
    When Im in valid SSO of yyyy.com I get the mail account for user1 as [email protected] .....but the calid .. common as user1
    How I can get unique calid for users under two domains..
    whether I need to set Hosted domain support...Then how the mailid's differ with out using hosted domain support..
    And I need to login UWC without using @domain.com...
    Help me on this...
    Ashik

    Do you have UWC and Cal configured at least for virtual domain support?
    basically.. for discussion.. let's say you have three domains on your server.. 1st domain is the default domain. other 2 domains are virtual domains.
    if all domains were created with mail and cal support (-S mail,cal).. you would use the following options when creating users:
    1) for the default domain.. you must use the "-k legacy" option when adding users.
    2) for the other two domains.. when you create the user.. do NOT use a "-k" option.
    If you do not use the "-k" option.. it defaults to "hosted" which will cause the user's calid to be [email protected]
    If you Do use the "-k legacy" option.. it will create the calid as just "userid"
    With regard to logging into UWC without the @domain.com part of a username in a hosted domain.. the easiest way to avoid this.. is to point a host name under the hosted domain to the server.
    if you point webmail.xxxx.com to the server... and then access it via:
    http://webmail.xxxx.com/uwc/
    any users in the xxxx.com hosted domain will NOT need to use @xxxx.com when logging in... they can just use "userid"
    This feature does not take any special configuration (aside from adding a DNS entry for the hosted domain)
    Hopefully that helps.

  • Recommendations for page with many movies?

    I have created a page with iWeb that has over 20 mini movies on one page.
    They are all small and the whole site (which consists of this one page) is less than 4 MB, but it pretty difficult to scroll through the page (slow moving).
    I'd love to hear some suggestion on how to do what I'm doing in a better way so that scrolling through the page wasn't such a problem.
    Any ideas (or different programs) would be greatly appreciated.
    Luke
    Here's is the page:
    http://www.calhouncycle.com/shopcast/wp-content/uploads/bells/Site/_.html

    Having all of the videos on the page in that manner requries them all to load as the page loads. That's what making the page so slow.
    One method is what I've used in this demo page: PhotoPresenter Animated Slideshow Themes.
    How it's done is described in this demo page: Opening Item in a New, Precisely Sized Window.
    However, both my site and yours require the viewer to have Quicktime installed on their computer. Roddy's iWeb for Musicians site has several pages of video players that work with both PCs and Macs. Some are:
    <a href="http://www.iwebformusicians.com/HTML5-Media-Players/JW-Video-Player.html" JW Longtail Video Player</a>
    Play movies on your website with HTML5 Video
    HTML 5 Web Video
    OT

  • Timing model of T1 for use with SAM

    In the OpenSPARC simulator slides, the author mentioned that it is possible to use the loadable module mechanism of SAM to attach a cycle-aware timing model. Does anyone know if such a model exists for T1 to be hooked up with SAM?
    Thanks.

    Hi DeeinFL,
    I am sorry to hear your OfficeJet J6450 is no longer operational. I see that you're interested in using the duplexer from your J6450 on a newer HP product, unfortunately there is no product that would be able to use that duplexer but the printer it was made for. With that being said most of HP's printers made today come with a duplexer.
    If you go to www.hp.com/shopping and select the Printers tab on the far left hand side you're able to Filter your search. I checked Duplex printing under the Narrow by features option and it brings up 51 printers.
    I hope this is helpful, if you have any questions please let me know.
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • How do I log a support call for Pages with Apple?

    Hello,
    Sorry to have to ask this question here because I suspect it has been covered and I'm searching wrong. Anyway I'm on the Apple support site trying to log a call for some erratic behaviour when Pages tries to sync with iCloud. It seems that no matter what I end up having to enter the serial number of my hardware. Well first off this is a software issue and not a hardware issue - I've been to the Genius Bar and they believe it is Pages failing to sync with the iCloud. I have had both the iPad and the iPhone replaced during the issue and still the same problem. Secondly I have two devices affected by the same Pages behaviour
    Ok so after going around in circles for quite some time and becoming quite frustrated I thought I would come here for some sane suggestions. The first of which I fully expect to be an explanation of how to log a software support call Is there anyone out there who can advise me on how to log my issue please?
    Many thanks in advance,
    Andy

    Do what you did before and, in a second session, look at V$SESSION and other relevant dynamic performance views.

  • JSF navigation rules sent me to different page, with same URL

    Hello everybody,
    Have a newbie question on JSF, if anyone can help me. I am using JSF for a web application, and i have a small problem.
    If i define a navigation rule, from one page to another, and i am having a button that should send me to another page,
    the browser URL remains the same, although the page content IS correctly changed.
    Thanks,
    Andrei

    You're welcome.
    Though I should have added that the advantage of the redirect after a POST request is that refreshing the request or navigating back and forward by browser history doesn't cause a re-submit of the POST request anymore. This way you avoid duplication of submitted data. This is called POST-redirect-GET pattern. Refreshing the request after a redirect (which is always a GET request) would only cause the redirect being refreshed, not the initiating POST request.
    The disadvantage of a forward is less or more obvious: the URL remains the same and it is not really good for the user experience. If one copypasted the URL in a new window (a new GET request), one wouldn't see the forwarded page, but the originating page. That's why I would recommend to avoid navigation cases and just use the same page to postback the POST request to. For normal page-to-page navigation within a website, I would recommend just using outputlinks and not commandlinks with navigation cases. It's all better for the user experience.

  • New desktop has wrong path for page links in nav bar

    I created a new desktop and have the following problem. The image links to portal
    pages in the horizontal nav bar in the top have wrong path.
    Example.
    In the original portal the home page link in the nav bar has a image associated
    with it in workshop.
    \framework\skin\classic\images\home.gif
    The partial url generated for the image looks liek this:
    \mywebapp\\framework\skin\classic\images\home.gif.
    I created a new desktop everything works fine except for the images. The href's
    are created for the links but the image path is wrong.
    the url generated is : \mywebapp\appmanager\framework\skin\classic\images\home.gif
    The "appmanager" in the path causes the problem.
    Is this a bug?

    Hi Subbu,
    I used workshop page properties to associate the image to the page.
    framework/skins/classic/images/home.gif
    - Shankar
    Subbu Allamaraju <[email protected]> wrote:
    Shankar,
    Did you use any tag to create the img tag? Do you have any sample
    HTML/JSP snippet?
    Subbu
    Shankar Bala wrote:
    I created a new desktop and have the following problem. The imagelinks to portal
    pages in the horizontal nav bar in the top have wrong path.
    Example.
    In the original portal the home page link in the nav bar has a imageassociated
    with it in workshop.
    \framework\skin\classic\images\home.gif
    The partial url generated for the image looks liek this:
    \mywebapp\\framework\skin\classic\images\home.gif.
    I created a new desktop everything works fine except for the images.The href's
    are created for the links but the image path is wrong.
    the url generated is : \mywebapp\appmanager\framework\skin\classic\images\home.gif
    The "appmanager" in the path causes the problem.
    Is this a bug?

  • Code highlighting for page with .master extension

    Hi,
    How do I get Dreamweaver to highlight the code of .master
    pages just the same as it does with .aspx?
    I've looked through the help docs.
    Please advise, thanks.

    The dreamweaver support page has a technote section.
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_16410
    Adding file extensions to dreamweaver
    note- pay attention to the part about which set of files to
    modify- not the
    ones in program files, the ones for You as a User get
    changed.

Maybe you are looking for