Wrong business area at the time of ML81n and Miro

Hi exeprt
In service PO, i have taken cost center 3000, in KS02 for 3000, business area is 3000.when i have did the Sevice sheet Acceptence(ML81) business area (1000) is picking wrong for the GR/IR g/l. when i did the miro, in business area field i have given 3000, but when i am doing Miro simulation, against the G/R g/L business area (1000).
check the same scenario in development is coming properly and patched is also the same on ll the cleint.
I have check business area assignment in enterprise structure, okb9,
Kinldy suggest what are the area to check.
Regard
Nabil

Hi expert
Thnx for the advisable suggestion, but i would like to know, y system will not pick the business area of the cost center which is assign.
Regard

Similar Messages

Update Ledger group in BKPF at the time of MIGO and MIRO

Hi Friends,
In our current implementation we have requirement to update a certain Ledger group, to restrict the postings in all ledgers, at the time of positng in MIGO and MIRO.
Can you please let me know how we do this.
Waiting for your reply,
Madan Mohan

Hi Santhosh,
Thanks for your reply. But in the substitutions at header and line item level i didnt find the 'U300' userexit.
Can you suggest me at what level i can find that user exit.
Thanks and Regards,
Madan

CST and VAT added to material at the time of migo and miro

Hi,
we are maintaining FV11 record in that case amount is displaying but condition value is showing "0"
Thanks a lot in advance for your confirmation,
Neelima
Edited by: Jeyakanthan A on Sep 7, 2011 10:03 AM

Hi,
VAT can be inventoried or can be used for Set-Off based on how material behave to the business. VAT can be inventoried, you should have a condition type with assigning of NVV key in tax procedure .VAT can be used for Set-Off , you should have another condition type and assigning to an accounting key ( For example: ZZV {new on}not to the NVV key certainly) in tax procedure in OBYZ t.code & in t.code: OB40 , ZZV should assign to G/L account for VAT Set-Off.
For VAT - inventoried & VAT -Set-Off, you should maintain records(FV11)with respective condition type for VAT - inventoried & VAT -Set-Off with individual tax code with tax rate.
For VAT can be inventoried, it will affect on accounting in MIGO transaction adding VAT amount to Inventory Account.
For Set-Off VAT, it will affect in MIRO transaction.
Generally CST always inventoried by business, it will affect on accounting in MIGO transaction adding CST amount to Inventory Account and you have to have a condition type for CST with assigning of NVV key in tax procedure, tax code for CST and maintain record (FV11) with CST condition type with CST tax code with a tax rate.
Regards,
Biju K

Wrong business area assigned to the company code

Hi All ,
I am getting error " Wrong business area assigned to the company code " while posting a document in F- 02
please advise

Dear Balasubramaniyan,
You can supress the field Business area field in Field status Groups.
For this follow the following steps
Please check TCode OBC4 for field status variants
> Goto G001 (General) Field status group
>Additional Account Assignment
> Click supress in front of business area.
In that case, F-02 will not even ask for business area.
Also check whether Business area FS is ticked in front of your company code in TCode OB65
You may also refer to the following thread
How to assign business area to company code?
I hope this solves your query.
Thanks & Regards
Saurabh
Edited by: Saurabh Khandelwal on Nov 8, 2011 1:53 PM

Hdisk0 and hdisk1 is showing 100% busy most of the time

Hi,
hdisk0 and hdisk1 is showing 100% busy most of the time.During 100% busy database and application goes hang even a simple sql query or simple os command(ex: ls -lrt) takes long time to execute.whereas hdisk0 and hdisk1 not hit where oracle home and oracle datafiles is located.hdisk0 and hdisk1 hit /var,/tmp,/usr,/opt etc.
Regards,
Sajid

What OS ?
--AIX 5.3
What database version ?
--10.2.0.4.0
What kind of filesystem ?
Filesystem GB blocks Free %Used Iused %Iused Mounted on
/dev/hd4 1.00 0.95 6% 1975 1% /
/dev/hd2 4.00 1.45 64% 39807 11% /usr
/dev/hd9var 2.00 0.94 53% 577 1% /var
/dev/hd3 6.00 3.13 48% 4401 1% /tmp
/dev/hd1 1.00 0.90 11% 234 1% /home
/proc - - - - - /proc
/dev/hd10opt 0.25 0.18 29% 1284 3% /opt
/dev/fslv00 750.00 198.92 74% 1620391 4% /vol01
/dev/fslv01 460.00 200.18 57% 524775 2% /vol02
/dev/fslv02 185.00 44.46 76% 440425 5% /vol03
What is on those disks ?
rmsdb:/>lspv -l hdisk0
hdisk0:
LV NAME LPs PPs DISTRIBUTION MOUNT POINT
hd10opt 1 1 00..00..01..00..00 /opt
hd1 4 4 00..00..04..00..00 /home
lg_dumplv 8 8 00..08..00..00..00 N/A
hd5 1 1 01..00..00..00..00 N/A
hd8 1 1 00..00..01..00..00 N/A
hd6 77 77 00..77..00..00..00 N/A
hd2 16 16 00..00..16..00..00 /usr
hd4 4 4 00..00..04..00..00 /
hd3 24 24 00..00..24..00..00 /tmp
hd9var 8 8 00..00..08..00..00 /var
rmsdb:/>lspv -l hdisk1
hdisk1:
LV NAME LPs PPs DISTRIBUTION MOUNT POINT
hd10opt 1 1 00..00..01..00..00 /opt
hd1 4 4 00..00..04..00..00 /home
lv02 7 7 00..07..00..00..00 /mkcd/cd_images
loglv01 1 1 00..01..00..00..00 N/A
hd5 1 1 01..00..00..00..00 N/A
hd8 1 1 00..00..01..00..00 N/A
hd6 77 77 00..77..00..00..00 N/A
hd2 16 16 00..00..16..00..00 /usr
hd4 4 4 00..00..04..00..00 /
hd3 24 24 00..00..24..00..00 /tmp
hd9var 8 8 00..00..08..00..00 /var
What database processes are running ?
--As i observed while running oracle batch running
Did you look at memory and cpu and swap usage at the OS level ? Did you look at what OS process is using the most resource ?
--I use topas to look this but i did not get,How can i look what os process is using the most
resource?
Did you run a statspack or awr report on the database to identify what is running ?
--Nohting as Oracle support said
Regards,
Sajid

My iphone 4s shuts itself off all the time. starts normal and then shut it off and start all over again, what is wrong?

my iphone 4s shuts itself off all the time. starts normal and then shut it off and start all over again, what is wrong?

Your iPHone is designed by intention to shut off when there is a reason for the softwarer to believe that danger is immenent to the hardware. This can occurr if the software is running applications that have been corrupted due to all types of different scenarios. My best advice to you would be to restore your device back to default manufactures settings and do NOT restore the current backup of the IOS program currently running.
If this corrects the problem with your device intermittently restarting you will then know you have had applications there were corrupted on your device. Once you are convinced there are no issues with the hardware of your device you then are free to begin downloading software apps that were earlier on the device.
Good luck.

Wrong Business Area is given in WBS

Dear All,
I have created one project in that at project level in organization tab i have given Business Area B100 which is correct Business Area.
When I created WBS Element in Assignment Tab i have entered Wrong Business Area which is B008.These WBS Elements already Budgeted & Released also these WBS Elements are Acct.Asignment Element.
In this Business area field is also greayed so i can not change.
Remaining WBS Elements having correct Business Area which is B100.
Now i have to change Business Area B008 to B100
How i can do this.
Regards,
sandeep theurkar

Hi Shrikrishna,
I have created po & having a open commitments for those wbs elements.
Confirm me can we change business area, if not what i can do to rsolve the problem.
Thanks & Regards,
sandeep n theurkar

"Check Business Area of the company code" error while posting stock

Hi Experts,
While posting stock to a storage location of a plant , the system is giving me the following error message :
"Check Business Area of the company code" .
Would highly appreciate if I could get some info for this error message and how to resolve the same.
Thanks & regards
Vikas Hali

hi
i think division is missing in material master basic data , please enter division in basic data tab in material master then you will try ,
then post the stock
regards
vijay

How to remove business area from the Hyperion report

Hi All,
Kindly tell me the steps required to remove the business area from the Hyperion report.
Regards,
Ajay

s

My battery runs low very fast (three hours). I looked in the usage settings and it seems the time for usage and stand-by are the same, allthough i did have my iphone on stand-by!! What can i do?

Community,
I have a problem with my iphone 4. Every few months my battery starts draining within a few hours. I have tried all kinds of battery saving tips, but they don't help. When i go to the settings/general/usage is can see that the time for Usage and Stand-by are the same, so my phone is fully on all the time this explains the draining. But in reallity i turn my phone to stand-by most of the time, i mean the screen is black and all???
The first and second time a had this problem, both a few months a part, i restored my phone and it was solved. This time i restored my phone but this did not help!! And restoring my phone every two months is not my preferd way of solving this problem.
Does anybody have an idea on how to solve this problem? can anybody help me?
best regards,
Merijn

Restoring is the answer. It sounds as if there is a rogue process constantly draining your battery.
The issue you face is that, if you restore your backup thereafter, you risk the problem coming straight back with your files.
Store your files individually and it is time to start fresh.

Using more than one Business area in the same report

Hi,
Is it possible / recommended to use more than one business area in the same report.
For example, I have a sales (business area sales) report on one tab and a rebates(rebates business area) report on a second tab.
Thanks

Hello
Possible: yes
Recommended: no
This can certainly be done and Discoverer will not prevent you from having reports that use different business areas as you describe.
However, for management and security purposes it does not make for ease of use. As you know a user has the ability to share a workbook with another user. If they do this then ALL reports within that workbook are shared. If the receiving user does not have access to one or more of the business areas then some reports will run and some will not. This can be very confusing to an end user and a possible nightmare to administer.
My recommendation would be to have a workbook per business area and not mix.
If there is more than one business area per functional area, for example sales and returns, then so long as the users have access to both business areas then you could use a common workbook.
Personally I would not even do this, so my strongest advice would be to have all reports in a workbook written against the same business area.
Hope this helps
Michael

Restrict Output type at the time of Picking and Print after PGI

Hi All....
My business requirement is to restirct certain Output types such as LD00, LD0F etc. at the time of Picking and Batch determination and to print after PGI.
These output types are triggered Automatically via Batch job scheduled via third party tool. All the complete Delivery process is Auto.
Once Sales order is created the below process takes place.
Auto Delivery
Auto Shipment
Auto Picking and Batch determination (Now in this step I need to restrict)
PGI (Manually vai some custom program)
Once the Picking is done all the Output types appear in Delivery Header output which are processed with a Dispatch time of 4. (Appeared as Green tarrif.)
For the Output type LD00 -> 911 routine is added .
This routine is triggering at the time of Picking and Batch determination.
At this Point of Picking I can restirct the output type by using the Routine that not to display in Delivery Header, but iam not able to retrieve again at the time of PGI. Is there any option to get the data of Output type at the time of PGI.
Or is there any option for LD00 output type to dynamically select the Routine Number to trigger at the time of PGI. ( If I use Routine no 1 it will trigger at the time of PGI, but I cannot change especially for this purpose since this output type is used for multiple purposes)
Pls provide me the solution.

Hi Brad
I can copy the code from routine #1 into my routine #911 inorder to restirct the display of output type in delivery header. But as mentioned by you this routine is not triggered at the time of PGI. ( I checked at the time of PGI )
If i link my output type LD00 with Requirement #1 routine then it will be triggered at the time of PGI, but here the o/p is linked with Requirement #911.
Pls let me know if any thing wrong i mentioned...

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions a

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions are for the computer to read. Both formats are, of course, readily recognized and indexed by Spotlight. Journal articles have two essential components with regards to a database: the topical content of the article itself, and the cited references to other scientific literature. While a PDF merely lists these references, the HTML version has, in addition, links to the cited items. Each link URL contains the digital object identifier (doi) for the item it points to. A doi is a unique string that points to one and only one object, and can be quite useful if rendered in a manner that enables indexing by Spotlight. Embedded URL's are, of course, ignored by Spotlight. As a result, HTML-formatted articles must be processed so that URL's are openly displayed as readable text before Spotlight will recognize them. Conversion to DOC format using MS Word, followed by conversion to RTF using Text Edit accomplishes this, but is quite labor intensive.
In the last few months, I have added about 3,500 articles to this collection, which means that any procedure for rendering URL's must be automated and able to process large batches of documents with minimal user oversight. This procedure needs to generate a separate file for each HTML document processed. Trials using Automator's "Get Specified Finder Items" and "Get Selected Finder Items", as well as "Ask For Finder Items" (along with "Get URLs From Web Pages") give unsatisfactory results. When provided with multiple input documents, these three commands generate output in which the URLs from multiple input items are merged into a single block, which yields a single file using "Create New Word Document" as the subsequent step. A one-to-one, input file to output file result can be obtained by processing one file at a time, but this requires manual selection of each item and one-at-a-time processing. What I need is a command that accepts multiple input documents, but processes them one at a time, generating a separate output for each file processed. Is there a way for Automator to do this?

Hi,
With the project all done, i'm preparing for the presentation. Managed to get my hands on a HD beamer for the night (Epason TW2000) and planning to do the presentation in HD.
That of course managed to bring up some problems. I posted a thread which i'll repost here . Sorry for the repost, i normally do not intend to do this, but since this thread is actually about the same thing, i'd like to ask the same question to you. The end version is in AfterEffects, but that actually doesn't alter the question. It's about export:
"I want to export my AE project of approx 30 min containing several HD files to a Blu Ray disc. The end goal is to project the video in HD quality using the Epson EMP-TW2000 projector. This projector is HD compatible.
To project the video I need to connect the beamer to a computer capable of playing a heavy HD file (1), OR burn the project to a BRD (2) and play it using a BRplayer.
I prefer option 2, so my question is: which would be the preferred export preset?
Project specs:
                    - 1920x1080 sq pix (16:9)
                    - 25 fps
                    - my imported video files (Prem.Pro sequences) are also 25 fps and are Progressive (!)
To export to a BRD compatible format, do i not encounter a big problem: my projectfiles are 25 fps and progressive, and I believe that the only Bluray preset dispaying 1920x1080 with 25 fps requests an INTERLACED video (I viewed the presets found on this forum, this thread)... There is also a Progr. format, BUT then you need 30 fps (29,...).
So, is there one dimension that can be changed without changing the content of the video, and if yes which one (either the interlacing or the fps).
I'm not very familiar with the whole Blu-ray thing, I hope that someone can help me out."
Please give it a look.
Thanks,
Jef

FM - Budget check at the time of procurement and at the time of Issue

Hi
For a Material there is a budget for a procurement ( Check should happen at the time of procurement and a seperate budget for consumption ( Check should happen at the time of issue).How can I map this in FM- BCS.I am thinking of creating two commitmen items one for Procurement , to be derived thorugh matl grp at the time of PR / PO and One commitment item for consumption to be derived through consumption GL . Does it work , any comments?
Thanks in advance
Chris

Yes you are right , I have to make to sure stock budget doesn't get credited.
If you remember in one of my other threads, i wanted to derive commitment item from Matl grp, it was for this purpose. I will derive commitment through matl group at the time of procurement / GR etc and assign a dummy commitment item to stock a/cs. Where as i will derive a consumption commiment item from consumption GLs.
Thank you
Chris

Limit the time of lookup and make the method to throw an Exception

When I connect from
Client
Remote Desktop Client
Server:
SUN JAVA SYSTEM APPLICATION SERVER 9.0
Initial Context object is initialized as per below coding,
System.setProperty("org.omg.CORBA.ORBInitialHost", prop.getProperty("hostName"));
System.setProperty("org.omg.CORBA.ORBInitialPort", prop.getProperty("portNumber"));
InitialContext ctx = new InitialContext();
while .lookup("globalJndiNameForSessionBean") method is invoked on the InitialContext object and if the server is not available, it is throwing non stop error.
Please tell me wether I have to add any other Properties to limit the time of lookup and make the method to throw an Exception after two or three second, if the server is not available.

What do you mean by 'non-stop error'? This can only happen if your code goes into a non-stop loop.
The default TCP connect timeout is about 75 seconds, which in some circumstances is too long, but two or three seconds definitely isn't long enough. Ten to twenty would be more like it.
I'm not aware of any system properties that limit the ORB connect timeout but then I'm not aware where the existing J2SE ORB system properties are documented. If anybody has ever found this please let us know.

Wrong business area at the time of ML81n and Miro

Similar Messages

Maybe you are looking for