Wrong business system getting picked up

hi
I have a SAP A to SAP B ( sync proxy to Proxy ) scenario...
Here I have created a Business system called SAP_BACKEND for SAP A...
When a message is sent from SAP A and I check in SXMB_Moni in SAP A the sender system is not SAP_BACKEND but R3_SAP like that
how do i change this because this is giving me no receiver determined error

SAP_BACKEND is pointing to the tech system and client of SAP A...
Also I have imported it correctly in ID....
R3_SAP is not in SLD.....
How do I check the integration engine config of SAP A ( I checked in SXMB_ADM->integration engine config and it is pointing to PI )
My observation -- SAP A was earlier pointing to some other PI system . could this be a problem?

Similar Messages

Sometime wrong endpoint URL getting picked up at runtime at adapter engine

Hi experts,
In our production XI box, sometime wrong endpoint URL getting picked up at runtime at adapter engine.
But this scenario does not happen always. It happens sometime. I have checked url for integration engine in
SLD and also RWB->Component monitoring->integration engine, but in both the places it is correctly specified.
It is very difficult to find the root cause...please help
Thanks,
Nayan

Hi Christian,
May be it is a cluster problem...actual URL must be the URL of the cluster not any specific SAP server box....but in our case sometimes URL points to any SAP server that may or may not be within that cluster.
Please give some solution to rectify it.
Thanks,
Nayan

Wrong business systems are displayed

Hello all,
i have met a problem in XI/PI. We are using XI/PI 7.11 (dual stack) und one SLD for test- and product-systems. The SLD runs on SAP Solution Manager System (7.10). On XI test-system i have tried to add another business systeme in integration builder for a scenario. But only the business systems for product system are listed. And in XI product-system only the business systemes for test system are listed. Could someone telle, what is that problem and how to fix that? thx.
best regards,
Fanglin

Hello Hari,
i have tried to sign in SLD (web application), but i got the following error:
how can I fix at first the problem? thx.
best regards,
Fanglin

Wrong Execution Plan getting picked on some occassions

Hi,
The following query sometimes runs efficiently; gives quick results, CPU and IO utilization is also up to the mark. But sometimes the query takes very long time to execute.
At that time I do not observe any blocks as well. Also the CPU and IO is too huge for running this query. It seems the engine picks up wrong execution plan some times.
This query is fired through some product. So there is no scope to change the query. Any suggestions for the engine to pick up right execution plan?
select i . bpd_instance_id as instanceId , i . instance_name as instanceName , bpd . name as bpdName , istatus . name as instanceStatus , t . subject as taskSubject , tpriority . name as taskPriority , t . due_date as taskDueDate , t . attached_form_ref as taskAttachedInfoPathFormRef , t . attached_ext_activity_ref as taskAttachedExtActivityRef , t . task_id as taskId , tstatus . name as taskStatus , tuser . user_name as assignedToUser , tpriority . ranking as taskPriorityRanking from msadmin.lsw_task t with ( nolock ) inner join msadmin.lsw_bpd_instance i with ( nolock ) on t . bpd_instance_id = i . bpd_instance_id left join msadmin.lsw_task_status_codes tstatus on t . status = tstatus . status_value left join msadmin.lsw_bpd_status_codes istatus on i . execution_status = istatus . status_id left join msadmin.lsw_priority tpriority on t . priority_id = tpriority . priority_id left join msadmin.lsw_bpd bpd on i . cached_bpd_version_id = bpd . version_id left join msadmin.lsw_usr_xref tuser on t . user_id = tuser . user_id where ( t . status in ( '11','12' ) and ( t . user_id = 5909 or t . task_id in (
select t . task_id
from msadmin.lsw_task t with ( NOLOCK )
inner join msadmin.lsw_usr_grp_mem_xref m with ( NOLOCK )
on t . group_id = m . group_id
where m . user_id = 5909
and t . user_id = -1
) or t . task_id in (
select t . task_id
from msadmin.lsw_task t with ( NOLOCK )
inner join msadmin.lsw_grp_grp_mem_exploded_xref x with ( NOLOCK )
on t . group_id = x . container_group_id
inner join msadmin.lsw_usr_grp_mem_xref m with ( NOLOCK )
on m . group_id = x . group_id
where m . user_id = 5909
and t . user_id = -1
) ) ) order by taskDueDate , taskPriorityRanking , instanceId , taskId

Is it a good practive to update a stat nightly on all the tables with FULL SCAN? will it help to boost the performance?
Maybe. But it may also be overkill, particularly if you do not have the hours. A somewhat better option may be to run with FULLSCAN, INDEX to only update the statistics for indexes. But note that if you rebuild an index, that updates the statistics for that
index with FULLSCAN anyway.
But overall, there are rarely any magic button to performance tuning. In the end, you will need to do the hard work to find the painful queries that need better indexes or needs to be rewritten.
Erland Sommarskog, SQL Server MVP, [email protected]

Wrong Pricing Procedure getting picked up in Value Contract

While creating Value Contract, when we maintain conditions, the condition type which we want to maintain are missing.
During a year, PO is made a for a value of around 15 crores. So we need to make contract which will pick up the same pricing procedure which is picked up for all those PO's. The pricing procedure was specially created for these PO's.
Now while we create contract it should pick up that same pricing procedure which it picks up in the PO.
The vendor, material & Purchase Org is same in our contract as it is there in the PO.
So I feel when we create a contract it should pick the same pricing procedure as it does for PO's, but our contract picks some other pricing procedure.
what is the configuration to be done specially for Value contract.
Regards,
Karthik

Hi,
The pricing procedure is determined differenetly for contract & PO .
For PO, pricing procedure is determined by the Vendor Schema Group and Purchase Org Schema Group.
But in case of Contract the pricing procedure is based on condition supplements of condition type PB00.
Condition type PB00 is considered as master condition type in case of Pricing procedure of contract.
In std SAP contract system picks up RM0001or RM1001 because these pricing procedures are maintained in the Condition Supplements of PB00.
If you want to have pricing procedure other than RM0001 or RM1001 then you need to maintain that pricing procedure in the Condition Supplement of condition type PB00.
Regards

G/L account picked for the "wrong" source system entry

Dear Experts,
in SRM 7.0, Classic Scenario, i am facing the following issue with respect to G/L account determination in the SC:
We have three R/3 systems connected to SRM. All these R/3 systems use the same Material Groups, but the G/L accounts are different in each R/3 system.
In the Table "Determination of G/L Account using product categories", i have maintained the repsective combinations. For each combination of product category and account assignment category, the respective G/L account is defaultet for the respective source system.
But in the shopping cart, the determination of the correct G/L does not always work. When a user enters the shopping cart initially with a line item that is accounted to his default account assignment category, than the correct G/L account for his source system is derived. But if he changes the account assignment category of the line item, than a G/L account from a "wrong" source system is getting picked up from the table.
I have checked the GUIDs of the product categories between "Comm_category" and "bbp_det_account" and they are correct.
What can be the reason for the picking of the G/L account from the wrong source system?
Can the note 1357871 bring the correction?
Thank you very much!

Hello Dima,
I think your problem comes from your source system for product category management.
Could you clarify one point: if you change account assignment category, does new G/L account have to be determined for same backend system too or not ?
If yes, correct new G/L account will be determined using your customizing (IMG: SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Account Assignment > Define G/L Account for Product Category and Account Assignment Category ).
If it does not work, log an OSS message.
If no, you need to switch value for each SC item field BBP_PDIGP-LOGSYS_FI from old backend source system to the new one. For this, use BBP_DOC_CHANGE_BADI.
Then, your customized G/L account definition for product category and account assignment category should be OK.
Regards.
Laurent.

Getting XI business system name Dynamically

Hi All,
I am using RFC lookup for one of our project requirment. we will be using one of our inputs as business system which hosts the RFC function module (RFC_READ_TABLE). in our dev it is our XI business system. But when we move these objects to quality or prod, this mapping fails because the name of the XI business system changes. Can anyone suggest me how we can get the xi system name dynamically.
Best Regards,
Deepika

Hi Deepika
You can use the function "Sender" or "Receiver" (depending upon whether your business system is sender or receiver) which is available under 'Constants' category in Standard funtions of Graphical mapping.
These functions give the current value of the businees system in the environment where the interface is running.
Let me knwo if you are still not able to pick it.
Thanks
Ram

Interface getting failed after changing the Business system to that service

Hello All,
Our Env... is XI 3.0 and this is related to produciton env.
Based on our client requirment to change the business system from client 871 to 100 for one of the R3 system which is reciever type(rfc).
After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in the system.
The steps which I have followed to change the Business system.
1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
Then i saved the changes and after that i have activated that interface.
After that when i logged into CC monitoring and viewed that service channels and see the following errors:
Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
Awaiting for your reply.
Best Regards
Rakesh Reddy

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Hi Ankita,
Try to trace at ICM level, Go to smicm transaction
Set level to 3.
Later send your request. Finally trace the request in:
When you have seen the log, check if any exception is raised with your request or the request and share it here.
Regards.

Made automatic from the system to pick business area ?

Hi
For VAT GL account system is asking business area to entered manually, can this be made automatic from the system to pick business area ?
Thank You
Ramakanth
Edited by: Ramakanth Ambala on Jul 24, 2008 10:07 PM

Hi,
I think there is no possibility of picking business area automatically in FI.
But in CO u maintain the business area within controlling. This means that when you create cost center master records you need to specify the business area. CO objects such as, cost centers and internal orders aid account assignment, as the business area can be derived from the master data records. When you post primary costs to a cost center, the system determines the business area automatically from the cost center master data. This enables the costs to be assigned to the correct business area.
Therefore, you do not need to manually set the business area in the posting document, as the system does this, and thus reduces the number of incorrect assignments to a minimum.

I am not getting Business System into my Integration Directory.

Hi All!
This is satish, <b>I created Business system in SLD. How to get them in Integration Directory.</b>Please help me.
Thanks in advance!

Hi Satish,
Go to Service without Party->Right Click->Assign Business System->it will show you list of Business Systems created in SLD -> then go ahead
Then
2 options to refresh the cache-
Integration Directory->Environment->Clear SLD Data Cache
Another way is -go to SXI_CACHE / Goto - Business System -> delete the content
Still , if you are not able to see the Business sytem in the Directory, the just go and check in the SLD. If it exists just change and save it.
Then synchronise the same by SLD cache refresh as mentiond.
changing BS
Also refer for more-
Problem in Assigning the Business System
Hope this helps,
Regards,
Moorthy

Unable to Get Reflected Business Systems in ID

Hi Experts,
I am Doing File to File Scenario.
I Have Created PRD ,SWCV, TS, BS For Two Sender And Receiver Applications
I Completed the Creation of Interface Objects, Mapping Objects in IR.
While creating the ID Part,,,,, While Assigning the Business Systems----There is No List in the Business Systems .
Note::::I Did SXI_CACHE And SLD Data Cache
Please Let me Know
Regards
Khanna

HI Khanna
Follow the steps given below.. it will works out...
Go to Objects in the ID
Select the Business system
alternate click
and select assign to Scenario
Cheers..
Vasu
<i>** Reward points if found useful **</i>

During TBB4 wrong cost center is getting picked

HI SAP Experts,
from the below path i changed the cost center from 10000 to 50000...
SPRO Financial Supply Chain Management Treasury and Risk Management Transaction Manager General Settings Accounting Link to Other Accounting Components Allocate Additional Account Assignments to Account Assignment References
Now the issue is that when we did this changes in DEV & QA system & did TBB4 for any loan account system did pick the changed cost center 50000, but when the changes moved to Production & during TBB4 system is still picking 10000 cost center.
If check the menu path above and cost center has been changed to 50000 in production also, but now able to understand why system is still talking old cost center 100000 in produciton..
Please advice..
Regard.

Hi,
Please check whether there are any default account assignments exists for that cost element in OKB9. In case if default account assignments exist, then cost center might be picked from them.
Please check if the BAdI TPM_ACCIF_TRAC is implemented and inside if there are any custom coding. If there are no settings, then please check for any relevant OSS notes.
Regards,
Ravi

SLD webservice to get Business system details

Hi,
Is there a standard SAP provided webservice in SLD with which i can read all the properties of a business system?
My scenario is like below:
I have the logical system name with me in an external system, i need to resolve the details regarding the logical system from the business system details in the SLD.
Thanks & Regards,
Renjith John Andrews

Hi VJ,
Thank you very much for your response.
Actually i had seen the FM from inside SLDCHECK on the backend system.
However, the scenario that i am in - is that i need this information on a different system altogether which is java based.
Also, I have seen other forum posts which have pointed out to use CIM java APIs to read SLD details.
I was hoping that SAP has supplied a standard service so that i can avoid the usage of the APIs directly in my coding and use an SAP published service.
Regards,
Renjith John Andrews

While doing PGI I system getting Error

Dear SD Experts,
While doing PGI in delivery system getting Error "The batches are not defined for delivery item 000010".
Error Massage :- Message no. VL605
I already defined Batches to the given item. Its appearing Under Material and its specified in Batch split Tab.
Kindly suggest me where I was wrong and what configuration I missed.
Regards,
Manzoor Ahmad

hi
select the stock against the batch which should be equal to delivery quantity.
that means delivery quanquantity should be equal to picing quantity.
after selecting manually press F3 to go back.
system will give a POP UP message say YES
then the batches against the quantity will be copied in the delivery document
again go back you will come to over view of delivey screen
then in picking tab page you will find all picked quantity if not give it manually
and save the delivery document with out pressing PGI.
hope this clears your issue
balajia

Wrong business system getting picked up

Similar Messages

Maybe you are looking for