Wrong calling Number in QM

Hi All,
I have installed QM version 2.6.1SR1 with UCCX 7.0.1SR5 and CM 7.1.3b.
After testing I see that calling number dispaly in QM is the cti-port number instead of original calling number.
Did I miss something in configuartion or it is the bug?

Hi
Sounds like a bug... my only AQM customer is running 2.7 and they don't see this.
Regards
Aaron
Please rate helpful posts..

Similar Messages

Wrong Caller-ID displayed - only rightmost 4 digits used for matching number - name

Hi,
Some days ago I discovered a rather strange and very confusing behavior on my Z10 wrt matching calling number to stored contact (name):
When you get a call there should be a "reverse lookup" in the phonebook matching number to name. As it seems the match number to name is solely done based on the rightmost 4 digits. This can lead to very confusing situations to say the least:
Say you have the number +43123456789 stored belonging to "Smith". Now when you get a call another number, say +432838126789 the Z10 displays the calling party as "Smith" - which is defintely wrong.
The same holds true when placing outbound calls: Again, take the contact Smith having +43123456789. Suppose on Z10s dialpad you enter a number, say +43228376789 (righmost 4 digits are the same). When you finish the call in your last call log the Z10 displays the number called as "Smith" - which is completely wrong.
So here are my questions:
Anybody else seen this behavior
Any known cure against it?
BTW - this is happens not only on my Z10 but on every Z10 that is used in our company.
Thanks much in advance for any clue,
-bblacksheep
Solved!
Go to Solution.

Test the recommedationa and see if it works.
Remove the country code from the number you're dialing and see if it fixes it.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Why do my contact photos keep getting assigned to the wrong person/number?

This has happened to me twice recently: my phone rings and the wrong contact photo appears with the wrong phone number. All my contact photos are assigned to the wrong person/phone number. Any ideas on what's going on? Thanks!

Thanks for your reply.
Can I get this straight in my mind? Does this mean that I will have to put ALL the photos stored on my Laptop into ONE large folder, then divide it up into sub-folders? Then I can copy each sub-folder?
Sorry to sound stupid, but most things I try on my ipod don't seem to work for me. I think I am getting a bit old for all this.....lol.
.......Actually thinking back, a while back I did click on my main folder called "Nikon" and that did copy everything in it, but just in one whole lot, ie 1,000 photos.........................so nothing was sub-divided into folders, ie. holiday 2010, holiday 2011. Is that another problem I have created for myself?
Thanks for your patience.

Wrong Phone Number Listed when connected to desktop Software (and a few other probs)

I just downloaded the New Desktop Software. When I connect my Tour, it displays the wrong phone number.
I got this phone from a friend. It has been wiped and all. I wonder why it displays her phone number instead of mine. My phone calls out and recieves calls and messages just fine. It aggreavates me though. below is the screenshot of it. please help
http://i694.photobucket.com/albums/vv308/dixie_boysles/screen.jpg
-Blackberry Tour 9630
-5.0.0.484 OS
US Cellular Customer

I am having the same problem.

Voip IP thelephony bad Calling number interpretation

HI folks,
We are using a CUCM 6.x and h323 gw with BRI interfaces. in last days there is a problem with calling number interpretation on the external phone calls. there are missing last 2 digits on the interpreted number.
I have checked the output of the Caling number in the setup message outgoing from the GW and the phone number is in correct format. But on my display I miss last 2 digits of the phone number.
Users are using CIPC
Can be the problem with the numbers in the CUCM or on the provider side?
Not every number is affected with this issue.
I have used the debug ISDN q931 to check the outgoing traffic.
Thanks in advance

Hi Josh,
meanwhile we have solved the issue, we have used traditional route patterns..
the problem was in the sending wrong type and plan settings to ISDN provider (External phone number mask didnt matched the translation pattern on the GW and therefore it was sent like unknown/unknown and correct value should be Plan : ISDN and Type: National)
thank you very much for a piece of your time and for replying on this topic.

FBL5N t code and BSEG table is showing wrong contract number

Hi,
The proces flow is contract number>sales order>DMR-->Invoice
Now when I am checking the VBFA table it's showing correct contract number against invoices but FBL5N t code and BSEG table are showing wrong contract numbers.
Why FBL5N and BSEG table is showing wrong contract number?
Currently we are using one enhancement and user exit is used to incorporate one customized field as identifier for bill type.
1. During the billing document release to accounting VFX3, The user exit triggering and it is update the customized fields and Net settlement indicator.
2. Using the Invoice number, get the fields VGBEL(Document number of the reference document) and VGPOS (Item number of the reference item) from VBRP and read table VBAP with VBELN and POSNR, to get DMR number (Sales Document) that created for the Invoice.
3. Use fields VGBEL and VGPOS on table VBAP to get the sale order number.
4. By using the Sales order number, get the Distribution channel to update Net indicator field
In accounting table BSEG-UZAWE = JF must be updated on the customer line.
5. Retrieve the sale order number and item level to get customized field from table VBAP
Any pointers.
Thanks
Ashu

Hi Reazuddin,
Thanks for your reply,
I am concercerned about BSEG table and using user exit EXIT_SAPLV60B_008 to post the document in FI.
Now in we have enhanced this user exit for contracts and included in this way.
SELECT SINGLE ZZ_CONTRACT FROM VBAK INTO (LC_CONTRACT) WHERE VBELN EQ cvbrp-vgbel.
Endloop.
*Moving the values to final accounting table
loop at xaccit.
xaccit-vertn = lc_contract.
xaccit-VBEL2 = xaccit-AUBEL.
xaccit-xref3 = lc_vbel2.
MODIFY xaccit .
ENDLOOP.
Clear: lc_contract,lc_vgbel,lc_vgpos,lc_vbel2.
But I am getting correct data when checked other clients( development and quality), this problem I am getting in production.
Do I need to ask the ABAP'er to debug this enhancement in production?
Thanks
Ashutosh

Re-installation of Acrobat fails for allegedly wrong serial number

Hi.
I have problems re-installing Acrobat 8 (CS3) on Windows 7 64bit, the program claims a wrong serial number. By mistake of course, since I use the original DVD. The history seems to be important.
History: I installed CS3 years ago, including Acrobat 8, and it ran smoothly all the time. Spring this years, I migrated to Windows 7, still everything was fine.
Last week I installed a trial version of FrameMaker 12; Creative Cloud was installed also, though I didn't want to. Some days later I missed the Acrobat icon, looked for the folder "Acrobat 8.0" and found it quite empty. And found a new folder "Acrobat 11.0" including acrodist.exe but no Acrobat 11.
To get it running again, I re-installed Acrobat 8 from the CS3 DVD. Worked o.k., but entering the serial number (and pressing "Activate") leads to a message "Invalid Serial Number". What? How can this be?
Well, o.k. Acrobat 8 is not up-to-date, but I want to use my stuff. Anyone knows what I can do?
Thanks,
Guido

After all, I got it fixed:
I uninstalled Acrobat and re-installed it (both via CS installer). I thought, that should have been the same as repairing, but obviously, it isn't as easy.

How to append calling and called number with translation rules?

Hello,
I have one question about digit manipulations.
How to append calling number and called number with IOS commands?
For example, when 123 dials 45678, translations have to be performed and the new called number to be 12345678.
Thank you,
I will vote this conversation.

It is not possible with translation rules.
However, you can do that with a TCL/IVR script.

SPA IP phones doesn't show calling number after the call was picked UP

Hello,
Our different CISCO SPA IP phones models (at this time we are using 7.4.8a version) are working with Broadsoft AS. And now we have a problem: when CISCO SPA IP PHONE pickups the call ( by pressing BLF lamp) and the call is connected, Cisco user doesn't see any information (calling name or calling number) with whom he is talking now. He on only sees on screen pickup extension *11 and info that the call is connected. From SIP traces I can see this information in PAI header in SIP 200 OK message (when pickup was initiated).
I also tried to change Caller ID Header - no luck. I've upgraded IP phone to latest version (7.5.1a) - didn't help.
I've experience with THOMSON and MGC. By pressing BLF , Thomson displays info who (calling number) is calling to your configured BLF line and gives you actions: retrieve this call or cancel - you can choose if you still want pickup this call.
So can you give me some hints how to fix this issue? Our at this time CISCO IP PHONE doesn't have such feature?
Thanks in advance,
Giedrius

Why not answer?
bug is available from firmware 7-4-7 and above and are still
on models SPA50x and SPA525

How to get incoming call number in j2me

hi all,
Is there any way to get incoming call number in j2me???
thanks in advance
mraj

You can't get this number at least till MIDP 2.0 devices.. you only have a interrupt events which call showNodify and hideNotify, pauseApp or start methods. Once can neither know if this interrupt is due to phone call, user switching to menu or sms etc..
Regards,
Raja Nagendra Kumar

Don't display caller number

I configure AutoAttendant through call router and call handler in unity ,but the caller number can't display and it prompts "From Voicemail" on phone before the call is picked up.And after picking up it,the caller number is display normally . Why ?

Hi,
Assuming that you've set up the call transfer to be 'supervised transfer' this is the behavior you're going to see. When Unity puts the original caller on hold in order to call your phone, the two call legs aren't bridged together, so the call appears to CallManager to be a simple call from Unity. When you pick up the call, then Unity bridges the two legs together, and CallManager changes the caller ID to reflect the change. If you reconfigure Unity to use 'release to switch' then you will see half a second of the call being from Unity, but when it bridges the two legs together (while your phone is still ringing), CallManager will immediately change the readout.
When you choose 'release to switch', Unity will put the caller on hold, dial the user's number, and connect the two. So, the caller should hear a very brief moment of music on hold, then hear the ringback from the phone, etc. To get it so that there's MoH until the recipient answers, you'd have to go back to 'supervised transfer', which would break your Caller ID.
HTH
//G

No Caller Number Display since August 2014

Caller number display ceased to function on 9th August last year.
Since the we have been through the fault reporting process 3 times. Had an aborted (by Openreach) engineer visit and received a statement letter from BT saying they are looking in to the problem, it will take time etc etc.
My equipment works at my neighbours house. The neighbours phone has been tried in my house and does not work. I have removed filters, unplugged everything, tried the Master Socket. None of these things works.
It is very tough to run my business without Caller Number Display.
Can it be fixed???
If I switch to another provider will Caller Number Display then work??
Help!

Hi Unclenorm,
Welcome to the community forum. I am sorry to hear that you are having problems with the Caller Display. I'll be able to take a look at this for you. Please can you send me in your details using the "Contact The Mods" link found in my profile.
Thanks
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Payment means shows wrong check number

Dear All,
Once we have added an outgoing payment and go back to the payment means window, it shows the wrong check number and not the one initially entered. Please advice on why this is occuring and how to solve this problem.
Kind Regards,
Monil.

Hi,
Can you please update us with the following information :
1) When in the Payment Means in the Outgoing Payment, the Check number was selected to be Manual or to be taken from the House Bank account? As if the check number is manually selected, only then the option to enter a Check number is available.
2) If the Manual Check number is entered, then please confirm whether the Print of the Payment was tried or not?
Kind Regards,
Jitin
SAP Business One Forum Team

Adobe wont update my CS 5, it says i have the wrong serial number. I have 2 serial numbers with my account, how do i switch the serial number in CS 5 to the other number?

Adobe wont update my CS 5, it says i have the wrong serial number. I have 2 serial numbers with my account, how do i switch the serial number in CS 5 to the other number?

David,
To switch, I am afraid you will have to reinstall using the other one.
But that should hardly be necessary.
If you can find no way, you may try a chat here,
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
or Adobe Support (phone) here,
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

Corrupt label, wrong magic number

Hi guys,
I have a problem I have 2 ultra 60 with disk array D1000. The problem is usually I turn off my disk array now last time I turned off my disk array after turning back Solaris doesn't recognized disks in disk array. I tried to relabel all disks in disk array by using format command but it " gives corrupt label,wrong magic number " . So could you please tell me solution.
Thanks in advance

The disk is probably just fine - it just doesn't have a Solaris vtoc (label) on it for some reason.
Did you get the disk from another source (taken from an old array or something similar)?
I'm surprised that the solaris install doesn't give you an option to place a label on the disk.
Next time the install exits, try running 'format'
This will give you a list of the internal disks (and external ones if you've got any additional HBAs and storage attached)
You'll see at least 1 with the string like:
c10t600A0B800026A8600000018F46B9783Ed0: configured with capacity of xxxxx(naturally, the actual c.t.d. string will be different on your system)
Find the corresponding disk in the list that follows and select it by number...
c10t600A0B800026A8600000018F46B9783Ed0: configured with capacity of 4.00GB
AVAILABLE DISK SELECTIONS:
       0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000000870fc5e9,0
       1. c1t2d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000000870efd67,0
       2. c1t4d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000000870e6669,0
       3. c10t600A0B800026A8600000018F46B9783Ed0 <SUN-CSM200_R-0619 cyl 2046 alt 2 hd 64 sec 64>
          /scsi_vhci/ssd@g600a0b800026a8600000018f46b9783e
       4. c10t600A0B8000266666000026AF46B6C7DFd0 <SUN-CSM200_R-0619 cyl 38398 alt 2 hd 256 sec 64>
          /scsi_vhci/ssd@g600a0b8000266666000026af46b6c7df
Specify disk (enter its number): 3
selecting c10t600A0B800026A8600000018F46B9783Ed0
[disk formatted]
Disk not labeled. Label it now? Answer yes to this and next time the install should continue.
Remember that you'll lose anything that was on this disk prior to the labelling (if anything) so make sure you're really wanting to do this before you try this on your system.

Wrong calling Number in QM

Similar Messages

Maybe you are looking for