Wrong Cartridge error on my Multipass MP730

I have an error WRONG CARTRIDGE what can I do I have purchased new ink and printed for the last 2 week and now I have the same message ?

Hi SnuggleBunnyMN,
Since the ink tanks have already been replaced, please remove and reseat the ink tanks and print head in the printer. If you still receive the same error, please turn off the printer, unplug the power cord from the back and leave it out for at least 10 minutes, then plug it back in and turn it back on to try and reset the printer.
if you still receive the Wrong Cartridge error after resetting the printer, it will require servicing to resolve the issue. Please click on the Contact Us link below to obtain your servicing options.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Have multipass mp730 printer/fax-alert light stays on, says wrong cartridge-cleaned head

have multipass/mp730 printer/fax. alert light stays on-says wrong cartridge, changed them,cleaned head still on can't print

Hi lock,
Since changing the ink tanks and cleaning the print head did not resolve the error, please remove and reseat all of the ink tanks and the print head in the printer by following the steps at the link below:
MultiPASS MP730 Removing / Reseating the Ink Tanks and Print Head
Once the ink tanks and print head have been reseated, please turn off the printer, unplug the power cord and leave it out for at least 10 minutes, then plug it back in and turn it back on. If the error persists, the printer will require servicing. Please Contact Us for your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Multipass F30 has error message "check printer" then "wrong cartridge".

Multipass F30 has error message "check printer" then "wrong cartridge". When I open the lid the printhead does not move to center. Manually moved and replaced cart with 2 new black carts. No change. removed power for 15 minutes. No change. What do I do next?

Hi DSCkeith,
It looks like you've already gone through the normal troubleshooting we would do to try and fix this issue. If what you have tried has not resolved the issue, service would be required. I recommend using the Contact Us link to get in touch with our support staff. They can provide any applicable service options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Printhead stuck to right with clicking noise. Error message: Wrong cartridge.

Multipass MP390 now has printhead stuck to the right. Error message - Check printer - wrong cartridge. When I attempt to use or clean (through additional functions-maintenance) it sounds like the printhead moves, but it doesn't and then I receive a click, click, click noise. Is this printer doomed? Any way to reset the printhead? Will the scanner/fax continue to work if the printer/copier can not?

Hi JBrennan,
Repair service via a Canon Authorized Service Facility is no longer available for this product, but please feel free to take the printer to a local service facility of your choice for repair.
We also have other options available to you; please call or email us at one of the methods on the Contact Us page for more servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HP Deskjet 1510 Tri-color Ink Cartridge Error

I just bought a HP Deskjet 1510 back in August and I loaded the HP original ink cartridges that come with the purchase. For the first 5 print jobs it was working well, but somehow after a while my laptop and the printer itself just kept warning that there's low ink level in the cartridges (especially the tri-color one). I haven't even got to use the tri-color cartridge much as I've been printing in grayscale ever since I've used this printer.
I've tried taking the cartridge out and putting it back in again; sometimes it works, sometimes it doesn't. I thought it might be a contact issue so I cleaned those parts too but it didn't change anything.
It's getting extremely frustrating as I'll have to do this for god knows how many times for every single page I print or copy. This happens to the black cartridge too but 90% of the time it's the tri-color cartridge.
Please help.
Thanks.

Hello @ut32w , and welcome to the HP Forums, I hope you enjoy your experience!
I hope you had a great holiday!
I understand from reading your post that you are running into cartridge errors. I'd like to help!
I would first suggest removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend running through the steps listed in the document below:
An 'Incompatible Ink Cartridge or 'Ink Cartridges Missing' Error Message Displays for HP Deskjet 151...
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet Pro 8600 Premium e-All-in-One - N911n cartridge errors

Please help! I have an Officejet Pro 8600 all in one that is just over a year old, just out of warrenty... We don't use it much and so just had to change the ink cartridges for the first time. Once they were changed out, the printer gave me the warning that there is a cartridge error and that the Cyan failed. Even though it was a brand new cartridge, I bought another one and changed it again. I still get the same error message with the 2nd new one. I have been through everything on the HP website for troubleshooting this problem and nothing works! Please, does anyone have anything else I can do????

Sorry to hear you are still having this problem. So the yellow was out and you replaced the yellow and then the cyan failed?
Printers when left not used for some time, may have printhead issue, but if it's not even recognizing the cartridge, then more likely a hardware or board issue that may need professional service.
One thing you can try is to update the firmweare (if not already), http://ftp.hp.com/pub/softlib/software12/COL41945/bi-101905-5/OJP8600_N911a_R1322C.exe
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

How do I fix Cartridge Error and flashing light message on my 4215xi all-in-one? I use windows 8.1

This equipment was working just fine after I installed a re-filled black ink cartridge. A few days later I began to get a flashing light with the message: Cartridge Error. See Product Documentation for details. Sometimes my computer said the printer was offline when it wasn't. I have also had occasional cartridge door open messages when the door was closed. I have removed the two cartrdges, cleaned them with water by using a coffee filter as a swab. I have also uninstalled and, I think, reinstalled the software printer driver, but I am not entirely certain as to that.

Hi there @donpablitosan!
Thank you for posting on the HP Forums!
I would be happy to help in regards to the flashing lights and cartridge error on the printer. You had also mentioned that the computer sometimes shows the printer offline or door open errors. I should be able to help with that as well!
The first thing I suggest is to plug the printer into the wall outlet directly if it is currently in a power surge protector or extension cord. This may sound silly but this will ensure the printer is getting full power and may eliminate any unnecessary troubleshooting. If the printer is no longer getting full power from the power surge or extension cord it may give false errors or have poor connection and paper feed issues.
From what I can find it looks like you have done all the troubleshooting regarding the cartridge itself. If you have tried the above suggestion and are still getting the same issue then you may need to try another cartridge to see if the issue is coming from the printers hardware or the cartridge.
Thanks again for posting on the HP Forums!
Please post back and let me know how it goes and enjoy your day!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Wrong Name Error

Hi,
I created a package in eclipse with 3 .java files under it.
In each of the three java files I have included the "package testpackage;" clause at the top.
My first 2 files (lets call them one.java and two.java) is referenced in three.java, thus I use the import statement for both one and two in three.java.
After I compile all 3 successfully in Eclipse, I go to the command line, to the specific directory (testpackage) and run: java one, but I get the message:
NoClassDefFoundError: 1 (wrong name: testpackage/one)
What is wrong?

I found that you need to be in the PACKAGE directory when you execute the "java" command, not the directory containing the .class file(s). For example, if you have the following statement in your java program:
package buServer;
Your .class files (BUreceiver.class in my case) will reside in a directory named buServer. You need to be in the directory ABOVE the one that contains your class files (the package directory) and execute the program as shown below:
java buServer/BUreceiver
The above assumes that the current directory is in your CLASSPATH or is given by the " -cp ." on the java command line.
The basic problem, I think, is that CLASSPATH points to directories that are supposed to contain .class files. When you use a package, you have to give the fully quallified name of the class with a root beginning in one of the directories in the CLASSPATH. In my case, the "package" statement says my class should be in a <CLASSPATH>\buServer\ directory. When I was in the buServer directory (containing my .class files) and added it to the CLASSPATH, there was no <CLASSPATH>\buServer\ directory, since the buServer\ directory was inside CLASSPATH. However, when I tried to execute it without qualifying it with the "buServer", it saw the package statement in the class file that was there and gave me the "wrong name" error.
Another solution would have been to take out the package statement from the program.

HP 5510 all in one reads "print cartridge error"

Printer will not reset after I installed new HP black cartridge. I cleaned cartidges and printer heads as per HP instructions,
but same error message remains. Is there a way to reset the printer?

Hello @mainelym , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are running into cartridge errors. I would like to help.
I would recommend removing the ink cartridges, and performing a power reset on the printer.Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then suggest this document on A 'Used or Counterfeit Cartridge Detected' or 'Counterfeit Cartridge Advisory' Message Displays on t...
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Check print cartridge error

I installed a new black cartridge in my HP PSC 1410 All-in-One. It printed a sheet to align the cartridges, but it won't scan, and I can't find HP Utilities or Scan or Toolbox on my MAC.
I tried taking one cartridge out, then the other. That did not help. I also tried turning everything off, no luck. The only thing that happened was the printer printed another aligning sheet.
Any suggestions??
Thanks

Hello apgrams,
Welcome to the HP Forums!
I understand you're receiving a few problems with the PSC 1410. I will do my best to assist you! What is your operating system on your Mac computer? Click here to find out.
Are you still receiving "Check Print Cartridges" error?
Is this alignment sheet missing colors? If not, then please follow these steps:
1) Remove all ink cartridges from the printer, then close the door
2) Remove the power cord from the printer (Do not press the power button)
3) Wait 60 seconds or more, then plug the power cord back in
4) Wait for the printer to turn on completely, then install the ink cartridges
5) Try to print another alignment page
I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

Wrong name: error with Tomcat

hello, I'm running Tomcat on Debian Sarge and I'm getting the following error:
java.lang.NoClassDefFoundError: com/bluewolf/BlueWolf (wrong name: BlueWolf)
     java.lang.ClassLoader.defineClass1(Native Method)
     java.lang.ClassLoader.defineClass(ClassLoader.java:620)
     java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
     org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1629)
     org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:850)
     org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1299)
     org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1181)
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)
     org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:744)
     org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     java.lang.Thread.run(Thread.java:595)
The name of my servlet is BlueWolf. I have defined my servlet in my web.xml like so:

<servlet>
<servlet-name>BlueWolf</servlet-name>
<servlet-class>com.bluewolf.BlueWolf</servlet-class>
</servlet>

<servlet-mapping>
<servlet-name>BlueWolf</servlet-name>
<url-pattern>/BlueWolf</url-pattern>
</servlet-mapping>
I've tried searching for this error but there were no fixes I found that helped my situation. Can anyone please help me out? If any more information is needed please let me know.
Thanks!

Okay, I made a simpler web application. I have:
index.html
WEB-INF/
my WEF-INF directory looks like:
classes/
lib/
web.xml
my only servlet is WEB-INF/classes/com/servTest.class
I defined the servlet in my web.xml like this:

<servlet>
<servlet-name>servTest</servlet-name>
<servlet-class>com.servTest</servlet-class>
</servlet>

<servlet-mapping>
<servlet-name>servTest</servlet-name>
<url-pattern>/servTest</url-pattern>
</servlet-mapping>
However, I still get the same error (NoClassDefFoundError .... wrong name: servTest blah blah)
I am trying to access the servlet by the url http://localhost:8080/servTest/servTest and I've also tried http://localhost:8080/servTest/com.servTest. I also tried linking to it in my index via a form with action="servTest". I've also tried action="com.servTest" however I still can't seem to get past this wrong name error. However, I can create servlets fine without trying to use packages (i.e. if i place .class files directly in WEB-INF/classes), but I would really like to have packages working. Can anyone see any potential errors? thanks!

Wrong name error if I mess up url string case

Hi:
          I have a url as the following: http://localhost:7001/APP/a.jsp. If I
          close browser and type it as lower case url
          http://localhost:7001/app/a.jsp later time, it will cause a null pointer
          exception(wrong name error). Is the url case sensitivity problem been
          fixed by any service pack.
          Thanks,
          David


Okay, I made a simpler web application. I have:
index.html
WEB-INF/
my WEF-INF directory looks like:
classes/
lib/
web.xml
my only servlet is WEB-INF/classes/com/servTest.class
I defined the servlet in my web.xml like this:

<servlet>
<servlet-name>servTest</servlet-name>
<servlet-class>com.servTest</servlet-class>
</servlet>

<servlet-mapping>
<servlet-name>servTest</servlet-name>
<url-pattern>/servTest</url-pattern>
</servlet-mapping>
However, I still get the same error (NoClassDefFoundError .... wrong name: servTest blah blah)
I am trying to access the servlet by the url http://localhost:8080/servTest/servTest and I've also tried http://localhost:8080/servTest/com.servTest. I also tried linking to it in my index via a form with action="servTest". I've also tried action="com.servTest" however I still can't seem to get past this wrong name error. However, I can create servlets fine without trying to use packages (i.e. if i place .class files directly in WEB-INF/classes), but I would really like to have packages working. Can anyone see any potential errors? thanks!

I keep getting a "Print Cartridge Error" even after replacing both ink carts in my psc2410

I keep getting a "Print Cartridge Error" on my psc 2410. I replaced both ink cartiridges and cannot clear the error. Any ideas?

After playing with it, I now get only a 'check color cartirdge' message. I've pulled it out, checked the contacts and put it back in several times to no avail...

ORA-29400: data cartridge error/IMG-00703: unable to read image data error

Oracle Database 10g Enterprise Edition Release 10.2.0.2.0
ORA-29400: data cartridge error
IMG-00703: unable to read image data
ORA-06512: at "ORDSYS.ORDIMERRORCODES", line 75
ORA-06512: at "ORDSYS.ORDIMERRORCODES", line 65
ORA-06512: at "ORDSYS.ORDIMG_PKG", line 37
ORA-06512: at "ORDSYS.ORDIMAGE", line 927
is raised when the following trigger is processing certain JPGs (example). Other JPGs are handled as expected:
create or replace trigger photo_size_trg
before insert or update on photos
for each row
declare
photo_width integer;
begin
-- Check to see if the new photograph is different from the old one...      --
if dbms_lob.compare(:old.photo, :new.photo) != 0
then
    -- ...if so, check to see if it's wider than the desired 250 pixel        --
    -- maximum...                                                             --
    photo_width := to_number(ordImage.getMetadata(:new.photo)(1).extract('/ordImageAttributes/width/text()').getStringVal());
    if photo_width > 250
    then
      -- ...and if so, apply an image transform that will resize to the photo --
      -- to a maximum of 250 pixels wide, keeping the original aspect ratio. --
      -- There doesn't seem to be an elegant way of specifying a constraint   --
      -- in one dimension like this, so the height is specifed as a large     --
      -- enough value to cover all practical contingencies.                   --
      ordImage.process(:new.photo, 'maxScale=250 10000');
    end if;
end if;
end;Any thoughts/suggestions?

hi,
I am getting following error,kindly help me out to rectify this ..
thank you
ORA-29400: data cartridge error
ORA-00600: internal error code, arguments: [kokbCollTerminate], [13], [], [], [], [], [], []

Error in .oci.GetQuery(conn, statement, ...) :    ORA-29400: data cartridge error ORA-24323: ????? ORA-06512: at "RQSYS.RQTABLEEVALIMPL", line 24 ORA-06512: at line 4

Hi,everyone,
            I had installed R Enterprise in my Oracle 11.2.0.1 base on win7,using the R 2.13.2, ORE 1.1, 　Ｉ can using the part function: like
library(ORE)
options(STERM='iESS', str.dendrogram.last="'", editor='emacsclient.exe', show.error.locations=TRUE)
> ore.connect(user = "RQUSER",password = "RQUSERpsw",conn_string = "", all = TRUE)
> ore.is.connected()
[1] TRUE
> ore.ls()
[1] "IRIS_TABLE"
> demo(package = "ORE")
Demos in package 'ORE':
aggregate               Aggregation
analysis                Basic analysis & data processing operations
basic                   Basic connectivity to database
binning                 Binning logic
columnfns               Column functions
cor                     Correlation matrix
crosstab                Frequency cross tabulations
derived                 Handling of derived columns
distributions           Distribution, density, and quantile functions
do_eval                 Embedded R processing
freqanalysis            Frequency cross tabulations
graphics                Demonstrates visual analysis
group_apply             Embedded R processing by group
hypothesis              Hyphothesis testing functions
matrix                  Matrix related operations
nulls                   Handling of NULL in SQL vs. NA in R
push_pull               RDBMS <-> R data transfer
rank                    Attributed-based ranking of observations
reg                     Ordinary least squares linear regression
row_apply               Embedded R processing by row chunks
sql_like                Mapping of R to SQL commands
stepwise                Stepwise OLS linear regression
summary                 Summary functionality
table_apply             Embedded R processing of entire table
> demo("aggregate",package = "ORE")
demo(aggregate)
---- ~~~~~~~~~
Type <Return> to start : Return
> #
> #     O R A C L E R E N T E R P R I S E S A M P L E   L I B R A R Y
> #
> #     Name: aggregate.R
> #     Description: Demonstrates aggregations
> #     See also summary.R
> #
> #
> #
>
> ## Set page width
> options(width = 80)
> # List all accessible tables and views in the Oracle database
> ore.ls()
[1] "IRIS_TABLE"
> # Create a new table called IRIS_TABLE in the Oracle database
> # using the built-in iris data.frame
>
> # First remove previously created IRIS_TABLE objects from the
> # global environment and the database
> if (exists("IRIS_TABLE", globalenv(), inherits = FALSE))
+     rm("IRIS_TABLE", envir = globalenv())
> ore.drop(table = "IRIS_TABLE")
> # Create the table
> ore.create(iris, table = "IRIS_TABLE")
> # Show the updated list of accessible table and views
> ore.ls()
[1] "IRIS_TABLE"
> # Display the class of IRIS_TABLE and where it can be found in
> # the search path
> class(IRIS_TABLE)
[1] "ore.frame"
attr(,"package")
[1] "OREbase"
> search()
[1] ".GlobalEnv"          "ore:RQUSER"          "ESSR"
[4] "package:ORE"         "package:ORExml"      "package:OREeda"
[7] "package:OREgraphics" "package:OREstats"    "package:MASS"
[10] "package:OREbase"     "package:ROracle"     "package:DBI"
[13] "package:stats"       "package:graphics"    "package:grDevices"
[16] "package:utils"       "package:datasets"    "package:methods"
[19] "Autoloads"           "package:base"
> find("IRIS_TABLE")
[1] "ore:RQUSER"
> # Select count(Petal.Length) group by species
> x = aggregate(IRIS_TABLE$Petal.Length,
+               by = list(species = IRIS_TABLE$Species),
+               FUN = length)
> class(x)
[1] "ore.frame"
attr(,"package")
[1] "OREbase"
> x
     species x
1     setosa 50
2 versicolor 50
3 virginica 50
> # Repeat FUN = summary, mean, min, max, sd, median, IQR
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+           FUN = summary)
     species Min. 1st Qu. Median Mean 3rd Qu. Max. NA's
1     setosa 1.0     1.4   1.50 1.462   1.575 1.9    0
2 versicolor 3.0     4.0   4.35 4.260   4.600 5.1    0
3 virginica 4.5     5.1   5.55 5.552   5.875 6.9    0
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+           FUN = mean)
     species     x
1     setosa 1.462
2 versicolor 4.260
3 virginica 5.552
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+           FUN = min)
     species   x
1     setosa 1.0
2 versicolor 3.0
3 virginica 4.5
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+           FUN = max)
     species   x
1     setosa 1.9
2 versicolor 5.1
3 virginica 6.9
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+           FUN = sd)
     species         x
1     setosa 0.1736640
2 versicolor 0.4699110
3 virginica 0.5518947
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+           FUN = median)
     species    x
1     setosa 1.50
2 versicolor 4.35
3 virginica 5.55
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+           FUN = IQR)
     species     x
1     setosa 0.175
2 versicolor 0.600
3 virginica 0.775
> # More than one grouping column
> x = aggregate(IRIS_TABLE$Petal.Length,
+               by = list(species = IRIS_TABLE$Species,
+                         width = IRIS_TABLE$Petal.Width),
+               FUN = length)
> x
      species width x
1      setosa   0.1 5
2      setosa   0.2 29
3      setosa   0.3 7
4      setosa   0.4 7
5      setosa   0.5 1
6      setosa   0.6 1
7 versicolor   1.0 7
8 versicolor   1.1 3
9 versicolor   1.2 5
10 versicolor   1.3 13
11 versicolor   1.4 7
12 virginica   1.4 1
13 versicolor   1.5 10
14 virginica   1.5 2
15 versicolor   1.6 3
16 virginica   1.6 1
17 versicolor   1.7 1
18 virginica   1.7 1
19 versicolor   1.8 1
20 virginica   1.8 11
21 virginica   1.9 5
22 virginica   2.0 6
23 virginica   2.1 6
24 virginica   2.2 3
25 virginica   2.3 8
26 virginica   2.4 3
27 virginica   2.5 3
> # Sort the result by ascending value of count
> ore.sort(data = x, by = "x")
      species width x
1   virginica   1.4 1
2   virginica   1.7 1
3 versicolor   1.7 1
4   virginica   1.6 1
5      setosa   0.5 1
6      setosa   0.6 1
7 versicolor   1.8 1
8   virginica   1.5 2
9 versicolor   1.1 3
10 virginica   2.4 3
11 virginica   2.5 3
12 virginica   2.2 3
13 versicolor   1.6 3
14     setosa   0.1 5
15 virginica   1.9 5
16 versicolor   1.2 5
17 virginica   2.0 6
18 virginica   2.1 6
19     setosa   0.3 7
20 versicolor   1.4 7
21     setosa   0.4 7
22 versicolor   1.0 7
23 virginica   2.3 8
24 versicolor   1.5 10
25 virginica   1.8 11
26 versicolor   1.3 13
27     setosa   0.2 29
> # by descending value
> ore.sort(data = x, by = "x", reverse = TRUE)
      species width x
1      setosa   0.2 29
2 versicolor   1.3 13
3   virginica   1.8 11
4 versicolor   1.5 10
5   virginica   2.3 8
6      setosa   0.4 7
7      setosa   0.3 7
8 versicolor   1.0 7
9 versicolor   1.4 7
10 virginica   2.1 6
11 virginica   2.0 6
12 virginica   1.9 5
13 versicolor   1.2 5
14     setosa   0.1 5
15 versicolor   1.6 3
16 versicolor   1.1 3
17 virginica   2.4 3
18 virginica   2.5 3
19 virginica   2.2 3
20 virginica   1.5 2
21 virginica   1.6 1
22 virginica   1.4 1
23     setosa   0.6 1
24     setosa   0.5 1
25 versicolor   1.8 1
26 virginica   1.7 1
27 versicolor   1.7 1
> # Preserve just 1 row for duplicate x's
> ore.sort(data = x, by = "x", unique.keys = TRUE)
      species width x
1      setosa   0.5 1
2   virginica   1.5 2
3 versicolor   1.1 3
4      setosa   0.1 5
5   virginica   2.0 6
6      setosa   0.3 7
7   virginica   2.3 8
8 versicolor   1.5 10
9   virginica   1.8 11
10 versicolor   1.3 13
11     setosa   0.2 29
> ore.sort(data = x, by = "x", unique.keys = TRUE, unique.data = TRUE)
      species width x
1      setosa   0.5 1
2   virginica   1.5 2
3 versicolor   1.1 3
4      setosa   0.1 5
5   virginica   2.0 6
6      setosa   0.3 7
7   virginica   2.3 8
8 versicolor   1.5 10
9   virginica   1.8 11
10 versicolor   1.3 13
11     setosa   0.2 29
but    when I use the following The ore.doEval command get the errors,
> ore.doEval(function() { 123 })
Error in .oci.GetQuery(conn, statement, ...) :
ORA-29400: data cartridge error
ORA-24323: ?????
ORA-06512: at "RQSYS.RQEVALIMPL", line 23
ORA-06512: at line 4
and I try to run the        demo("row_apply", package="ORE") get the same errors:
demo("row_apply",package = "ORE")
demo(row_apply)
---- ~~~~~~~~~
Type <Return> to start : Return
> #
> #     O R A C L E R E N T E R P R I S E S A M P L E   L I B R A R Y
> #
> #     Name: row_apply.R
> #     Description: Execute R code on each row
> #
> #
>
> ## Set page width
> options(width = 80)
> # List all accessible tables and views in the Oracle database
> ore.ls()
[1] "IRIS_TABLE"
> # Create a new table called IRIS_TABLE in the Oracle database
> # using the built-in iris data.frame
>
> # First remove previously created IRIS_TABLE objects from the
> # global environment and the database
> if (exists("IRIS_TABLE", globalenv(), inherits = FALSE))
+     rm("IRIS_TABLE", envir = globalenv())
> ore.drop(table = "IRIS_TABLE")
> # Create the table
> ore.create(iris, table = "IRIS_TABLE")
> # Show the updated list of accessible table and views
> ore.ls()
[1] "IRIS_TABLE"
> # Display the class of IRIS_TABLE and where it can be found in
> # the search path
> class(IRIS_TABLE)
[1] "ore.frame"
attr(,"package")
[1] "OREbase"
> search()
[1] ".GlobalEnv"          "ore:RQUSER"          "ESSR"
[4] "package:ORE"         "package:ORExml"      "package:OREeda"
[7] "package:OREgraphics" "package:OREstats"    "package:MASS"
[10] "package:OREbase"     "package:ROracle"     "package:DBI"
[13] "package:stats"       "package:graphics"    "package:grDevices"
[16] "package:utils"       "package:datasets"    "package:methods"
[19] "Autoloads"           "package:base"
> find("IRIS_TABLE")
[1] "ore:RQUSER"
> # The table should now appear in your R environment automatically
> # since you have access to the table now
> ore.ls()
[1] "IRIS_TABLE"
> # This is a database resident table with just metadata on the R side.
> # You will see this below
> class(IRIS_TABLE)
[1] "ore.frame"
attr(,"package")
[1] "OREbase"
> # Apply given R function to each row
> ore.rowApply(IRIS_TABLE,
+              function(dat) {
+                  # Any R code goes here. Operates on one row of IRIS_TABLE at
+                  # a time
+                  cbind(dat, dat$Petal.Length)
+              })
Error in .oci.GetQuery(conn, statement, ...) :
ORA-29400: data cartridge error
ORA-24323: ?????
ORA-06512: at "RQSYS.RQROWEVALIMPL", line 26
ORA-06512: at line 4
>
whether my oracle's version 11.2.0.1 has no the RDBMS bug fix, and other problems? Thanks

Oracle R Enterprise 1.1. requires Oracle Database 11.2.0.3, 11.2.0.4. On Linux and Windows. Oracle R Enterprise can also work with an 11.2.0.1 or 11.2.0.2 database if it is properly patched.
Embedded R execution will not work without a patched database. Follow this procedure to patch the database:
1. Go to My Oracle Support:http://support.oracle.com
2. Log in and supply your Customer Support ID (CSI).
3. Choose the Patches & Updates tab.
4. In the Patch Search box, type 11678127
and click Search
5. Select the patch for your version of Oracle Database, 11.2.0.1.
6. Click Download to download the patch.
7. Install the patch using OPatch. Ensure that you are using the latest version of OPatch.
Sherry

Wrong Cartridge error on my Multipass MP730

Similar Messages

Maybe you are looking for