Wrong cell #

I have been without my cell for over a month now. My son was helping to activate my new phone and it has the wrong cell #. It is showing (removed) and it should be (removed). I NEED to activate my cell, so how does it get changed to the correct #?
Private info removed as required by the Terms of Service.
Message was edited by: Admin Moderator

Hello txflwr48! I regret the difficulties you've been having while activating your new phone. I'd love to help, but I recommend that we take our conversation to direct message instead of here in the public forum. If you have not yet gotten your device activated, please follow these steps to follow my handle (DionM_VZW) send me a direct message: http://vz.to/1gBiqkv
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Similar Messages

HT204053 the wrong cell phone number shows up on my ipad

The wrong cell phone number shows up on my ipad when I put in my apple id. I have got to my apple.com and changed my phone number and it still won't change. I have even reset my iPad to correct it and didn't work. UGH! Help!

Welcome to the Apple Community.
Are you referring to messaging, it sounds as though you are sharing your ID with others.

Entered wrong cell on setup

I Entered a wrong cell number when setting up iCloud on my iPad. Now I can't seem to connect any other idevice because it's sending SMS to some strange cell phone. How do I fix this?

Are you talking about iCloud keychain? If so, go to Settings>iCloud>Account>Keychain (at the bottom)>Number, tap the number shown and enter the correct number.

I set up my iPhone through iCloud but assigned the wrong cell number to it so I am getting messages that don't belong to me but rather to my husband as I entered his cell number in there - how do I change that number to stop this from happening??

I set up my iPhone through iCloud but assigned the wrong cell number to it so I am getting messages that don't belong to me but rather to my husband as I entered his cell number in there - how do I change that number to stop this from happening??

Also, if you are sharing an Apple ID, you will get his iMessages.

Error in using ABAP OLE wrong cell value

Dear All..
I'm facing a problem while using ABAP OLE..
the problem is the ABAP OLE writes the wrong value in Excel file
the value is 121.000 but it written in Excel file : 121
the weird thing is .. other value of 9.000.000 written correctly in Excel File .. and also lots of other values..
i've trace the value until it goes to the method of :
CALL METHOD OF h_excel 'Cells' = h_zl
     EXPORTING
       #1 = i_row
       #2 = i_col.
   SET PROPERTY OF h_zl 'Value' = i_value.
   GET PROPERTY OF h_zl 'Font' = h_f.
   IF i_bold = 'X'.
     SET PROPERTY OF h_f 'Bold' = 1.
   ENDIF.
   and the values of variable i_value is still correct which is : 121.000 but after writing in excel it becomes 121
   i believe it will become faulty at the specific amount with format of XXX.000 because if I changed the value to 121.001 it displays correctly in Excel file..
i_value is a pass value from variable ld_val with data type of is --> ld_val(20) type n.
is this are originally bugs from the OLE ? how to solved it ?
please advice ..

yes it is clear, but how excel manage the passed data is unclear.
However, to solve you can try this:
DATA : ld_val(20).
WRITE value1 TO ld_val CURRENCY CURR.
REPLACE ALL OCCURRENCES OF '.' IN ld_val WITH space.
CALL METHOD OF h_excel 'Cells' = h_zl
     EXPORTING
     #1 = i_row
     #2 = i_col.
   SET PROPERTY OF h_zl 'Value' = ld_val.
   GET PROPERTY OF h_zl 'Font' = h_f.
   IF i_bold = 'X'.
     SET PROPERTY OF h_f 'Bold' = 1.
   ENDIF.
Regards,
Angelo.

JEditorPane: HTML Table: Wrong cells height calculation

<table>
    <tr>
        �<td width="200" height="5" bgcolor="red"><td>
    </tr>
    <tr>
        <td width="200" height="5" bgcolor="green"><td>
    </tr>
    <tr>
        <td width="200" height="5" bgcolor="blue"><td>
    </tr>
</table>
Just for last row I get the specified height "5", and two first ones have height "19". It is true for any height that less than 19. Is it a bug? How I can handle this and get the right behavior?

Hi Ruben,
you will have to implement adjustment of table cells yourself to achieve this. With the existing way JEditorPane et. al. render tables table cells always are sized either in default sizes or by attributes explicitly giving the size (such as attribute WIDTH).
Ulrich

JTable edits wrong cell on mouseclick

I am using an editable JComboBox as my cell editor. When the user is editing a cell and clicks on another cell with the mouse, the value of the cell they were editing is inserted into the cell that they clicked on. Can anyone please help me. Thanks.

The Swing tutorial has a working example:
http://java.sun.com/docs/books/tutorial/uiswing/components/table.html#combobox

Mail Merge from Numbers picks up wrong cell

I have a Numbers document with several tables (each in a different Sheet). The document was created by exporting data from ScrumWorks Pro into an excel document and than opened in Numbers. The data I use in the mail merge is in one of the tables. To prep the table for the merge, I set the top row of the one table to be a header row and save as a numbers document. Some of the columns in the table reference other tables in the document (for example = PBI::Table 1::C2).
In Pages, I use three of the columns as merge fields (column B - "Task Title", column F - "Original Estimates (hours), & column I - "PBI Title"). Column I is the one with references to the different table in the same document.
When I do the mail merge, the first page correctly gets the first two column, but not the third. The second page of the mail merge picks up column E instead of column B, column I instead of column F, and again not the third merge field. The third page of the mail merge picks up column N instead of column B, column H instead of column F, and again not the third merge field ... etc.
I am guessing that it wants/needs further modifications to the Numbers document to prepare it for the merge, but I am not sure what. Anyone have any ideas?

Not surprised at all.
You wrote that the column F contains hours values.
The truth is that it contain date_time values displaying only the time component.
The Mail merge hate this kind of data.
There is a simple workaround. Insert a new column just after column F.
In the new cell G2, insert the formula =""&F2
Apply Fill Down
In the Pages document, repose the field supposed to extract values from column F by one defined to extract from he new column G.
I'm quite sure that the merge feature will behave as you wish.
Yvan KOENIG (VALLAURIS, France) samedi 28 mai 2011 21:31:37
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Keychain wrong cell number for activation code

I've been trying to activate the keychain on my 5S thorough SMS activation code, but it keeps showing my old cellphone number from
Brazil even though I already changed it on my apple profile to my
USA number. What should I do to make it send the activation code to my new number? since I don't have other authorized device that I can activate the keychain from, I don't know what else I can do.

The serial number triplets are always groups of letters or numbers, not mixes of the two.
Yes.
You can capture to an e-Sata drive.

Why does the cell style index returning wrong CellFormat value when parsing excel cells using OpenXml SDK?

Consider a General format cell having a value of 39.95. When I fetch the CellFormat of the cell it returns wrong cell format-
CellFormat thisCellFormat = ((CellFormat)cellFmts.ChildElements[(int)thisCell.StyleIndex.Value]);
int fmtId = Convert.ToInt32(thisCellFormat.FormatId.Value);
The value of fmtId returned is 1, and in some cases 38, where it should be 2 or 39.
This issue is only for General format cells, I am getting correct id for Number format cells.
Below is the
Standard ECMA-376 Office Open XML File Formats specified set of implied cell formats for reference-
ID Format Code
0 General
1 0
2 0.00
3 #,##0
4 #,##0.00
9 0%
10 0.00%
11 0.00E+00
12 # ?/?
13 # ??/??
14 mm-dd-yy
15 d-mmm-yy
16 d-mmm
17 mmm-yy
18 h:mm AM/PM
19 h:mm:ss AM/PM
20 h:mm
21 h:mm:ss
22 m/d/yy h:mm
37 #,##0 ;(#,##0)
38 #,##0 ;Red
39 #,##0.00;(#,##0.00)
40 #,##0.00;Red
45 mm:ss
46 [h]:mm:ss
47 mmss.0
48 ##0.0E+0
49 @

The purpose of this forum is to support the Open Specifications documentation. You can read about the Microsoft Open Specifications program here,
http://www.microsoft.com/openspecifications/en/us/default.aspx
The library of Open Specification documents is located here,
http://msdn.microsoft.com/en-us/library/dd208104.aspx
It doesn’t appear that you are implementing one of the protocols cited. Your question may be more applicable to MSDN's Microsoft Office for Developers/Open XML Format SDK forum at
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=oxmlsdk
Bryan S. Burgin Senior Escalation Engineer Microsoft Protocol Open Specifications Team

ID CS 5 (Version 7.0.4), need to remove margins inside table cells

I'm building a table to compare features in 2 commercial products. I've created several small (22 px square) graphics in AI (saved as PDFs). I've started adding these graphics in the cells, but ID seems to always create small margins on the top, left, and bottom that I have not yet figured out how to get rid of. My goal is to create a pattern of tiles with no perceptable grout lines between the tiles. Is this possible? If it makes a difference, I used File->Place to insert the first instance of the PDF and Copy/Paste for subsequent instances.
Thanks,
John

Select the cells and use the Table panel to change the cell margins.
Also, Illustrator files are not measured in pixels. What Illustrator wrongly cells pixels should instead be called points. Pixels alone have no physically measurable size, but all Illustrator files do. Illustrator assumes a resolution of 72 ppi, making a 22 pixel image measure 22 points.

When I try to set up key chain the verification code phone number is wrong. How do I correct this wrong number?

When I try to set up key chain the device it is asking for verification has the wrong cell number. How do I correct this?

Follow this link ----> Get help using iCloud Keychain
The first part of it goes over how to change the phone number. If you can't access the keychain because you do not have the code. You will need to reset the keychain.

Linking Text Cells in more than one direction-NUMBERS

I am building a workbook template that has around 10 pages for estimating, everything is working rather well even though this is my first time using numbers. Currently i have 3 "notes" cells on the second page that will copy individually into other pages(3,4,5,) what im wanting to do is make this bi directional, meaning if on page 3,4,or 5 i decide to add something to the note i can and it will add into the origional cells on the second page. 2 of these notes also have a pop-up menu that copys in an ajacent cell with them onto pages 4 and 5. Can this be made bi directional also?

Hi McMiRA,
I don't see how this is possible. In order for a cell to read another cell there has to be a formula in it. If you enter data into that cell you destroy the formula.
My understanding of best practices is to try to segregate input tables, data tables and summary tables. The thinking is that if you enter data in a table with formulas it is easy to overwrite a formula if you click the wrong cell. I personally don't always follow this advice but I like to have one place to enter data. It is also nice to have a summary table all by its lonesome on a sheet for a quick read.
Quinn

ALV: Mark cell with red border

Hello,
can somebody tell me, how i can mark a cell as error, with a red border (which style is this)? My problem is that i've add some protocol entrys to the alv protocol at the event DATA_CHANGED_FINISHED with method ADD_PROTOCOL_ENTRY of class CL_ALV_CHANGED_DATA_PROTOCOL. After that i show the protocol entry with method DISPLAY_PROTOCOL but the wrong cells are not marked red. Is there a other method wich i've to call to et the cells marked red.
Best regards,
TomSd

If the cells are not marked in red, you probably missed to give the method the right parameters:
     CALL METHOD rr_data_changed->add_protocol_entry
            EXPORTING
              i_msgid     = '0K'
              i_msgno     = '000'
              i_msgty     = 'E'
              i_msgv1     = text-004 "Buchungskreis
              i_msgv2     = l_rbukrs
              i_msgv3     = text-006 "exisitiert nicht
              i_fieldname = ls_mod_cells-fieldname
              i_row_id    = ls_mod_cells-row_id.
you loop at your changed cells with
LOOP AT rr_data_changed->mt_good_cells INTO ls_mod_cells.
and with
CASE ls_mod_cells-fieldname.
      WHEN 'RBUKRS'.
you can place the adding of the error protocol entry mentioned above.
You can have a look at it in program BCALV_GRID_EDIT.

How to suppress the protocol dialog screen in ALV grid ?

To check the values in the ALV grid we make use of the method add_protocol_entry from the class interface CL_ALV_CHANGED_DATA_PROTOCOL. The coloring of the wrong cells in the ALV grid is a nice feature but the popup screen that appears on every entry that is incorrect is not so nice. Is there a possibility to suppress this dialog screen without stopping the coloring feature? Or is there an other way to get this coloring feature in the specific cells of the ALV grid. We have already tried the emphasize option in the field catalog but in this case the coloring of a cell disappears when the cursor is set on the colored field in the ALV grid.
I hope somebody can help us.
Thanks and greetings,
Ad Pegels
Suiker Unie
Netherlands

As I understand by adding the PROTOCOL you are trying to validate some fields and display those with a different color.
Instead, if you can validate and can change the color manually I think the pop ups can be avoided. All you have to do is to add a nested internal table to the main internal table that has the display data. This nested table will be of type LVC_T_STYLE. You can add rows, one for each field that you want to display in a different color and also spcify the style in which you want to display.
Once you do that those fields should be displayed with different colors.
Regards,
Ravi
Note : Please allocate points if you find this useful.

Wrong cell #

Similar Messages

Maybe you are looking for