Wrong channel distribution...Win7 64 and elite pro

2Wrong channel distribution...Win7 64 and elite proXHi folks!
I've updated my OS from a vista 32 to a 7 64bits and since then I've some problems with my Xfi Elite pro soundcard...
While listening some MP3s, the channel got mixed up and, generally I have a weird and loud noise before that occurs...
I've first thought it was a problem with foobar and its DSP but no... I still got the problem with other applications...
And when I test the channel with the audio console after getting the bug and after closing the audio software every channels seems to be correctly distributed...
I've a Z5500 kit hooked on the soundcard and I've also tried to play mp3 over the SPDIF output of the card and it seems to work fine... The problem seems to happen only when I play songs over the analog signal...
What do you think?

Hi there !
Sorry to bring back this old post from the dead, but I continue to have problems with my x-fi elite pro...As a matter of fact, I always had trouble with it !
Well to list all the problems I've have encountered :
The I/O console which seems to be dead then Suddely wake up in the world of the living.<
Sudden hissing sound coming from all of the Loudspeaker...<
Sudden loss of channels after changing the mode. The problem only settle after several reboots<
Wrong channels distribution with the analog config.<
Freeze my PC @ start up or BOSD ( on a vista x86).<
windows suddenly doesn't recognize it. And like the console, the card suddenly wakes up after several reboots.<
I've bought this card in 2006 I believe, and it has been the black sheep in my rig ever since...but it's also irremplacable because of its I/O console ! ( and to be honnest, for its sound quality when I've no problem with the card ).
As far as I can remember, I didn't had any problem as long I was on a good'ol xp. But I've moved on a 7 now...
Well, just to be sure, there's no way to use the console on the lastest fatalty? If not, do you know of a more recent card with both Spdif coax in/out and RCAs on it's
I thought of buying a Home cinema, but I would keep a good sound quality without laying to much bucks for it. And, moreover everything is in a small room...and my Z5500 is the perfect match for the setup of this room.

Similar Messages

Joe Meek Twin Q Pre-Amp and Elite Pro SPDIF/Digital input probs

Hi. I'm wondering if anyone can help. I've just purchased a Joe Meek Twin Q Pre-Amp and I specifically bought it for a new Rode mic I've just got and it needed phantom power. I also paid a little extra for the digital 'outs', thinking I could take an optic or SPDIF out into the Elite Pro breakout box. The problem is, is that digital is not recognised at all - in Audio Codes it states it's an invalid signal. However, SPDIF is recognised saying it's a stereo signal at 48,000hz, but is only being 'heard' in my right channel.
I have tried the line out into Line In 3, and there's no problem there. Joe Meek representative said it should be working as long as the bit match is the same in both units, which as far as I know is. Am I missing something here? I'm awaiting Creative to get back as it seems to me to be a breakout-box hardware problem, but I could be missing something?
Does anyone have any experience and/or advice/info?
Thanks in advance

Well, since you're not getting response, let me see what I can do.
I think you're saying the optical connection isn't working, but the coax (SPDIF) one is working, and then you're only getting the mic signal on one channel. The second part is easy to explain, but I never remember the solution suggestions. TOSLink/SPDIF, essentially, are stereo signals, and your preamp is simply putting its channel 1 signal on one side and its channel 2 signal on the other. If you had a second mic connected to the other connector, you'd have one mic on the left channel and the other on the right channel. Basically, you need to treat it as a mono signal and then either pan it into the stereo field, or just duplicate (convert) it to stereo. I'm sure there are ways, but someone else needs to join in with some experience. I'm not sure, but it seems to me if, say, you've put the mic in the channel 1 connector, you could take the channel 1 (analog) output and patch it into the channel 2 line input, and your digital outputs would probably get you the mic signal on both sides.
On both devices, the TOSLink/SPDIF signals are, to the best of my understanding, basically the same thing in two forms. If one is working, than the other should be working too. That suggests to me either hardware brokenness in the preamp's optical out, or the Elite Pro's optical in. or a problem with the optical cable. CL's optical outs can be checked to see if they are putting out red light: if they aren't, there's a problem. That probably applies to the preamp, in this case. You can simply connect the Elite Pro's optical output to its optical input and record something from the digital input device. If that works, the cable and the digital input are probably OK, and it most likely the preamp's digital output is broken (although it could be a strange compatibility issue). If it fails, then it's most likely either a bad cable, or the Elite Pro's optical input is broken. Trying another cable, or some other piece of gear you have that outputs optical, ought to sort out which it is.
-Dave
[email protected]

Difference between Elite Pro and Elite Pro L

Hi I will soon buy the Elite Pro but I have newly seen that there is two models of this card availble the "old" one and the new L6. The pricedifference is about euro less for the L6 (at my local netdealer) but no specifications availble yet for this card.
I have looked at soundblaster.com but only find the elite pro not L6.
Anyone here who knows ?

How could anybody know? There is no available info about a?"L6" card, official or unofficial. Is it in stock where you saw it advertised? have you tried to contact the store to ask for the differences?

Help connect X-fi Elite Pro with DDTS-100 and Gigaworks s750

Hi,
I purchased a brand new Gigaworks s750 speakers system, DDTS-100 decoder and X-fi Elite Pro. I connected the DDTS-100 and Elite Pro using Optical Fibre output from the audio console of X-fi Elite Pro to the optical digital input of DDTS-100. With the cables supplied with s750, I connected it to the Decoder DDTS-100. The problem is I am not getting any sound from the rear speakers and the front speakers. Only the centre speakers and the side speakers are producing sound. I could hear loud hissing sound and very very low volume of the music from the front speakers and no sound from the rear speakers. I can hear good quality sound from the centre speakers and average quality sound from the side speakers. What could possibly have gone wrong with my setup ? Somebody please help me. Thanx in advance.

Hi Richie,
Thanq for your response. But unlike what you have mentioned, ("what may be happining is the soundcard is decoding the signal and then the ddts is trying to decode it with disatrous results"), In my setup the signal is not getting decoded two times, once by Soundcard and once by the DDTS-100. As I have mentioned that I am taking out an Optical Signal from the sound card to the DDTS-100, the signal comming out from the sound card to the DDTS is Encoded signal only. So there doesnt arise a chance that the signal is getting decoded twice. Can you think of any other reason why my setup is not working? Please let me know.
regards,
Rahul M

64mb Xram on Fatal1ty/elite pro--- used for soundfonts/DSP or just games?

I found the documentation on the use of the 64mb Xram included on the fatal1ty and elite pro Xi-Fi cards. I read that the Xram allows for larger samples and better performance in games, but did not find any specific references to its function in Soundfont playback or music production.
Can anybody shed some light on this matter?

voggy_dog wrote:
I found the documentation on the use of the 64mb Xram included on the fatal1ty and elite pro Xi-Fi cards. I read that the Xram allows for larger samples and better performance in games, but did not find any specific references to its function in Soundfont playback or music production.
Can anybody shed some light on this matter?
Maybe this
article brings some light into this matter.
jutapa

Fatal1ty/Elite Pro Differen

is there any hardware level difference between XtreamGamer Fatality Pro and Elite Pro? (other than IO Console or remote)
Is there any difference in sound quality or performance?
I already own Fatalty and wanna buy a new one for my bro
Thanks All

voggy_dog wrote:
I found the documentation on the use of the 64mb Xram included on the fatal1ty and elite pro Xi-Fi cards. I read that the Xram allows for larger samples and better performance in games, but did not find any specific references to its function in Soundfont playback or music production.
Can anybody shed some light on this matter?
Maybe this
article brings some light into this matter.
jutapa

Strange Line In problem with my X-Fi Elite Pro. Stereo sound comes and goes

I have an X-Fi Elite Pro with latest drivers installed. Everything works fine, except for the Line In port in Entertainment mode. I have an AverMedia TV/FM card and its audio output (stereo) is plugged in my X-Fi's Line In/Mic In (PCI). The problem is that I get sound only from the right channel but not from the left one, so the sound comes out in mono. From time to time, I get to hear in stereo (both channels) but it seems a random event. This input works just fine in Game and Creation modes btw.
Stereo sound from this particular input comes and goes in random order and sometimes I get about 50% on the left and 00% on the right channel. Sometimes, left channel volume fades in and out slowly. I already did some troubleshooting such as set Line in/Mic In/Digital In to "Line In/Mic In", speaker diagnostics, checked it in Game & Creation modes, turned to default values and so on but I still get this problem.
Seems pretty wired. A ghost in the machine! Creative products never seize to amaze us!

Soo...your're calling me stupid? Well, perhaps your right, but then again, I might have a point!
Read my post again.
If you still think it's too low with SVM enabled and everything is turned up...then I'm affraid you're out of luck and might consider buying another speaker set, if it's a major issue to you.

Elite Pro and vista, creative console resets after ever reb

So, I've given up trying to search for the answer and I have no clue how to go about fixing this problem.
If I boot into visata 32 Ultimate, and go and setup my audio console the way I like it then reboot, it will reset itself to defaults when I boot back into windows.
basically its not saving my configuration. Why does this happen and how can I fix this? It doesn't sound the same as the Digital output resetting itself. I have the latest drivers installed on a clean slate...why does this still happen?
its friggen annoying!

yep , i see they are supported, the same is mentioned on the drivers download page,
it states that DTS has been re enabled on devices that supported it on XP when they were originally released.
so i have the elite pro, wich supported dd and dts, and still i get no sound form any dvd in dts or even sound from my PS3 input via optical to the external I/0 of the elite pro.
and i have been told that i would need to buy the dts pack.
why ? when i already paid ?250 for the card that supported it from the moment i bought it ?
dts input support was one of the reasons i bought this card in the first place.
i might as well sell this and use my onboard optical output and buy an amplifier that supports dts, at least then ill know that there are no drivers/support problems
?creative you might make the best sound cards out there but that alone only gets you half way there. us customers we need support and value for our money?
not u trying to rip us off
Message Edited by dkbimo on 07-0-2009 03:57 PMMessage Edited by dkbimo on 08-4-2009 05:9 PM

5.1 sound X-Fi elite pro and DTT3

Hi all?Ok, so I have an X-Fi Elite Pro, and the DTT3500 speaker setup from Creative. Both very expensi've where I li've. I could get 5. sound from my SB Li've! 5. digital, but no such luck on the X-FI. I've read all the posts, but when speaking to Creative tech support they tell a different story. I know I can get 5. (supposedly) from DVD etc. via co-ax or optical. How do I get 5. from other apps (such as VideoStudio) or games (BF242, etc.) that do not output DD or DTS?I've tried flexi jack to DIN (from card rear panel to the speaker amp), DIN to DIN (from break-out box to speaker amp) and 3 x 3.5mm stereo to DIN (from card rear panel to speaker amp) Nothing works. I get headphone sound obviously, and can get plain stereo sound (although I didn't get this setting right for optical; works with co-ax though)?(excerpt from tech support mail)
To assist you, i would suggest to connect the DDT3500 to the soundcard using the 3.5mm jack and the DIN Cable provided directly to the soundcard through the Digial In and DIN Socket.. enable the "Bit-Steam off" in the Audio Console, 2. select " Digital DIN" on the DTT3500 FacePlateIn case if you need any clarification, please do not hesitate to contactus.(/end excerpt)?I have made up a cable with 3 x 3.5 mm stereo jacks > DIN and got no sound at all from this. Tried all my solutions with digital I/O both on and off.?This is all very limiting, as apart from games that I'd like to enjoy as they're meant to be played, I also do video editing and need to proof my surround mixes. Not very happy Creative. Even the tech guy where I bought the card assured me it would work with 5....

I have never installed the updated applications available in the download page... just applications and driver for Vista 64bit inside the cd and i updated the driver with the latest one. Anyway, I: Reformatted and installed Vista.
Installed Chipset Drivers.
Installed Video Drivers.
Downloaded and installed JUST the latest SB drivers and i have that **bleep**-ing error window...Guys, it's 2 years i try to install Vista...Have i to destroy this sound card If i have to change it, i'll never buy another creative product in all my life (and till today i have bought 3 sound cards, 2 webcam, 4., 5. and 2. speakers for every computer we have in the office...). Thanks p.s.What is the DMLL.exe service, please
If i enter in the "Task Bar" is visible... if i close it and i restart the computer i find it... How can i delete it forever

I have a macbook pro and Premiere Pro 5.0...I'm trying to open audio channels to do a voice over.

I have a macbook pro and Premiere Pro 5.0...I'm trying to open audio channels to do a voice over. Every time I try to record it says I don't have a open channel.

Is there some reason you have not updated PPro 5.0 to the latest version?
All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/
More hardware information might let someone answer your question... such as brand/model microphone
-Information FAQ http://forums.adobe.com/message/4200840
-Effective questions http://forums.adobe.com/thread/416679
-How to get help quickly http://forums.adobe.com/thread/419406

Own an X-FI Elite Pro - Getting what sounds like a CD skipping and some distortion

Interesting I have had this card for some time now...and I never experienced any kind of distortion...popping...click noises...or anything that the majority of people here have been complaining about. I though I was one of the lucky few...that has all changed.
I started playing some BF2 the other day...and of course have the in game audio settings set to ULTRA to and X-FI to make use of my XFI 64 megs of RAM...anyways, this is the same setting I have had in BF2 since I've owned the game and have had my XFI - Elite Pro.
Anways, there I am playing my game when all of a sudden from time to time I hear what sounds like an audio CD skipping! I thought at first it was just me or the game...but no...it seems to happen more often than it use to! Like its getting wores! It cleary sounds like an Audio CD skipping!
another thing I started to notice is when playing MP3s and such.... I can hear distortion in the background! Its a bit hard to explain but what it sounds like the distortion isn't in the actual audio mix...almost like background distortion!
to test I would play the same audio track on my home theatre system and to my dismay... I heard no distortion...so that would label my XFI Elite Pro as the problem.
a couple of things to note:
st.. I have 2 fans hooked up on the same rail on my PSU that connects to the XFI Elite Pro. The fans have fan controlers as well... I haven't tried this...but its possible that since the fans are hooked up to the same wire as my XFI is...its possible I may be getting some electrical interference with them.
2nd... I just updated to the latest BETA drivers released by Creative. This is where I first started to notice the problem.
I have yet to dry difference drivers or remove the fans...however, I do believe I am finally experiencing what many other have been since there purchase.
I paid a **bleep** pretty penny for my Elite Pro and deffinitly EXPECT it run PERFECT!
deffinitly unhappy thus far.
I do have an Nforce based chipset. As well as an ASUS A8N32-SLI with the most recent BIOS update.
Like I said before, I am just now getting this sounds...its possible it could be the BETA drivers, I will keep you all posted.
For the mean time, anyone have any insight or opinions for me?
thanks in advnace!

no ideas huh?
is this the same stuff everyone else is experiencing?

I purchased a MacBook Pro in fall for College and it came with a $100 card. I signed up to redeem but accidentally put the wrong ending on my email and now that I try to do it over it says it has already been redeemed. Help, Please!

I purchased a MacBook Pro in fall 2011 for College and it came with a $100 "Back to School" card. I signed up to redeem but accidentally put the wrong ending on my email and now that I try to do it over it says it has already been redeemed. Help, Please!

- You can only sync an iPod to one iTunes library/computer. You can however, manually manage music and videos among different libraries.
Go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing>Sync your device manually and follow the instructions.
- If y wnat to switch syncing libraries/computer see:
go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing>Sync your device manually and follow the instructions.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
If all the synced media like music is in the iTunes library of the second computer it is very easy.

X-FI Elite Pro Din connector and compatible speakers

Hi all?I?m a?owner of an X-FI Elite Pro. Amazing 55 million transistor sound?From what I can read here in the forums, I can control selected Creative speakers with the?9 pin Din cable. I?m aware of the 3 spdif signals incompatibility with this connector.
Now I?m confused some say it works others say it doesn?t work..... Which speakers are supported ? Models ? Most of them have the wired remote or control pod. Nor in the speaker manuals nor in the Elite pro manual are the compatible models listed?I want power ... so I?m interested in the Gigaworks series like the S750. Anyone tested the combination ??

Well since nobody answered today I have hooked up the Logitch Z500 Digital and the sound is just amazing. I was moving to 7. but there isn?t much offer from Creative.... and 5. is still the standard. It?s a shame that on such a quality card there are only crappy Creative 20 watt speakers for sale.

X-fi Elite pro DIN out and Creative speak

hello,
I have the elite pro and megaworks 550 speakers, I have tried to connect the DIN cable from the I/o console to my sub instead of the original speakers remote control. but it is not work..it's won't turn my speakers on.
Is someone succeed to do that? maybe with another speakers? someone know how to fix it's
Thank you very much.

Some 8 months later people like me are still falling into this same trap.
The External console is NOT compatible with the Megaworks & Gigaworks speakers (even the 7. versions) or so I am told by Customer Support after 6 weeks of working through the issues.
Why Creative would design this incompatability into there premier products is beyound me

TV/ SKY Digital Sound Through MY X-FI Elite Pro and Gigaworks s

Hi i am trying to find out if i can get sound from my tv/sky digibox to pass through my gigaworks s750's.
I have just got hold of a new Sony Widescreen TV and a sky digibox both seem to to have audio out right and left on the back of them. On the computer side of things i have a X-FI Elite Pro and the Gigaworks S750's.
Im not sure about all of this so was hoping somebody in here could help.
Any Help on what i need to do or buy would be great
ThanksMessage Edited by Effigee on 2-5-2005 0:25 PM

Hey man, thanks for pointing me in the right direction! I started messing around with the Phono 2 dials on the unit and was having no luck what so ever. I then wanted to try my microphone to make sure that it was still working from all the changes I had made. Well, when I hit the record button and talked into my mic it showed something being recorded, so I knew my mic was still working... But.... when I played the recording, It was the recording from the T.V.!!! At this point I knew I was close to getting this issue solved.

I ended up having to open my "Sounds & Audio" controller within the Windows XP Control Panel and then going to the volume section of the XF-I card and then going to file, properties, and then check the "Phono 2" port off so that I could see it listed with all of my other volume and sounds controls. I then un-muted it as you said and Bam!!!!!!! Guitar Hero on my PS2 was pumping out at my full 500W!!!! I nearly went death from the experience, but it was very gratifying!!!

Thanks for your post. It really helped to point me in the right direction. I'm now thinking of digitizing all my vinal records now into MP3's too! Thanks again man, you?re the bomb!

Jeep

Wrong channel distribution...Win7 64 and elite pro

Similar Messages

Maybe you are looking for