Wrong Channels Being Mapped for 5.1 - Changing Has No Effect.

I just setup a new edit suite using a Blackmagic Decklink Extreme 3D Card, running on a PC with Windows 7.
Initially my 5.1 channel mapping required altering in Premier to get the correct output to the correct speakers but once sorted all worked great.... until today! For some reason no matter what I do some of the channels are now mixed up, and changing the mapping preferences has no effect. I am getting the Centre channel coming from the Rear Right and Rear Left is coming out of the Sub! I have my preferences set to output from the BlackMagic Audio Device, but even swapping left and right channels has no effect.
If I flick over to Audition and map the channels for a 5.1 mix it works fine and has the correct output which I guess rules out a problem with the DeckLink. This is REALLY frustrating me, any suggestions or advice on what could be the issue with premier would be greatly appreciated!

Moderator advice: Please read the announcement(s) at the top of the forum listings and the FAQ linked from every page. They are there for a purpose.
Then edit your post and format the code and CSS correctly.
db

Similar Messages

How to implement mapping for a slowly changing dimension

Hello,
I don't have any experience with OWB and I need some help.
I just don't know how to create the ETL process for a slowly changing dimension.
My scenario is that I have 2 operative systems providing customer information, a staging area and a dwh with a customer dimension with SCD type 2 (created within OWB).
The oltp data is already transferred to the staging area. But how should the mapping for the dwh table look like? Which operators have to be used?
I have to check whether the customer record is new or just updated. How can I check every attribute? A new record shall be loaded, an updated record shall be historized (as I configured it in the SCD type 2). I just don't know how the trigger of the SCD is activated. Do I have to try an update on the trigger attribute and then automaticalle a new record is created? But with which operator can I do this? How should the mapping look like? Or is this impossible and do I have to implement this functionality with SQL code only?
I know how to implement this with SQL code, but my task is to implement this in OWB.
As you see I did not understand the logic of OWB so far and I hope somebody can help me.
Greetings,
Joerg

Joerg,
Check the blog below which provides good detail and also check the OWB documentation
http://www.rittmanmead.com/2006/09/21/working-through-some-scd-2-and-3-examples-using-owb10gr2/
Thanks,
Sam.

Imovie volume change has no effect.

I don't quite understand what's going on here. It used to work fine, but now when I attempt to make any changes to audio tracks, it doesn't work. Ducking, fade-in, fade-out and even adjusting the volume of a single clip, are all no longer possible. The sliders move and there's no error message, I click done in the box, and voila, no change has occured! Even reducing the volume to 0% doesn't work. I have not made any significant changes in hardware or software-nothing that affects the operating system or Imovie, that is. I can't understand why a program would just suddenly lose capabilities for no reason. No other program on my computer is exhibiting any problems that weren't there before this started happening-otherwise, I'd suspect a failing hard drive, or a need to defragment or re-install OS X.
I have noticed several other posts with similar problems. I would suspect a software bug (i.e. a mistake in the development) but Imovie '11 used to work fine, and this problem didn't crop up following an update. Could such misbehavior mean I need to de-frag my hard drive? It's not like the project I'm working on is to blame because I tried starting a new project from scratch, and the same thing still happens.
If I don't get an answer, I may re-install Imovie to see if that helps anything.

Another general purpose trouble shooting step is to Run Disk Utility: Repair Permissions on the whole hard drive. Then reboot the Mac and see if the sound editing functions come back.
Similarly, deleting the Preferences file for iMovie can help in some cases (another general purpose step) Go to Mac HD>Users>(your home folder)>Library>Preferences>com.apple.iMovie9.plist and move that file to the trash. Restart iMovie and try to set the volume on that clip again.

Firefox lags after being open for too long, and has memory issues

After having FF on for like 24 hours it starts to respond slowly to typing in text boxes, clicking links, and generally lagging the entire system until I restart it.
Is there any way to fix this without restarting the program?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
You can uninstall (remove) the Java Console extensions and disable the Java Quick Starter extension as you do not need them to run Java applets.
See http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
See http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0
Disable the Java Quick Starter extension: Tools -> Addons -> Extensions<br />
Control Panel -> Java -> Advanced tab -> Miscellaneous -> Java Quick Starter (disable)

Keyword search address change, has no effect.

Long time ago I added Google Maps as a keyword search (maps <address>), which hasn't been working for a while.
After a little research, I've found out, that I had to change the URL for the search, the problem is though, that I can't find the bookmark anywhere! I've tried to create the bookmark again, with the correct URL, but somehow the old keyword has a higher priority, and therefore I'm still directed to the blank Google Maps page.

See how [[Smart keywords]] feature works.

How to undervolt MSI R9 280x for Linux? VBE has no effect on cards

Hi!
Does someone know, how to lower the core voltage for a MSI R9 280x under Linux? I have 2 cards. The old one is a s/n 602- V277 -28SB (great!) and the second one is a s/n 602- V277 -38SB (bad!).
I tried with VBE on my Windows-machine and set the voltage in the "State 1 - Performance" tab to 1062 for #6 and #0. After flashing the modded bios Vgpu is still at 1200 mV when measured directly on the card with a multi meter. Power consumption at the wall is 270 Watts. However, GPUz shows 1062 mV. Afterwards I set the voltage to -100 in Afterburner. The card now reads 1097 mV and the power consumption dropped to 235 Watt.
I have no idea why the card ignores the VBE settings. Any advice would be appreciated.

Quote from: love on 31-January-14, 06:29:44
Hi!
Does someone know, how to lower the core voltage for a MSI R9 280x under Linux? I have 2 cards. The old one is a s/n 602- V277 -28SB (great!) and the second one is a s/n 602- V277 -38SB (bad!).
I tried with VBE on my Windows-machine and set the voltage in the "State 1 - Performance" tab to 1062 for #6 and #0. After flashing the modded bios Vgpu is still at 1200 mV when measured directly on the card with a multi meter. Power consumption at the wall is 270 Watts. However, GPUz shows 1062 mV. Afterwards I set the voltage to -100 in Afterburner. The card now reads 1097 mV and the power consumption dropped to 235 Watt.
I have no idea why the card ignores the VBE settings. Any advice would be appreciated.
You are lucky, on my 28SB I can't boot after any change from 1200mV, even with 1193mV

I cannot purchase anything at the itunes store because I am being ask for my security questions, but I don't remember them. How do you change you security questions with out knowing them?

I cannot purchase anything at the itunes store because I am being ask for my security questions, but I don't remember the answers. I tried going to appleied.apple.com but I won't allow me to change my security answerswithout answering the original questions. How do you change you security questions with out knowing them? I need help.

Welcome to the Apple Community.
Start here, and reset your security questions, you will receive an email to your rescue address, use the link in the email and reset your security questions.
If that doesn't help or you don't have a rescue address, you might try contacting Apple through iTunes Store Support

ALE: mapping IDoc fields to change document fields - TBD22 for ADRMAS iDoc

Hi,
I am currently try to find a table or way to extract the information of the TBD22 table (ALE: mapping IDoc fields to change document fields) for the iDocs/ Message Types:
ADRMAS
INTERNAL_ORDER
PROJECT
I am looking for a table that shows me to which SAP R/3 tables and fields the segments and fields of the above mentioned messages will be mapped to.
When I add one of the above mentioned message types to the table TBD22 selection criteria I always receive the notification: "No table entries found for specific key".
Could anybody determine Which table I have to use or why I cannot extract this information?
Thanks in advance!
Best regards

Hi,
Since we can not map the target IDOC when any of the field changes using nodefunctions , you can write UDF and check the same i.e if field1 changes or field2 changes or field3 changes then trigger new IDoc. This is one of the options that you can try...please try it once.
Regards
Priyanka

My old apple ID is being used for the iCloud account. I need to change it to my current Apple ID, My old apple ID is being used for the iCloud account. I need to change it to my current Apple ID

My old Apple ID is being used for the iCloud account on my phone. I cannot change the account when I click on iCloud Settings. Please help!!

You will have to sign out from the iCloud preference pane and sign in with the new ID. Of course when you sign out all your iCloud data - email, calendars, contacts - will disappear from your Mac, assuming you have indeed been syncing them to the iCloud account you want to stop using. You can transfer the calendars and contacts manually, but you can't move the email addresses from one iCloud account to another.

Change Key Mapping for RWMS handheld application

Dear Experts,
When we login to handheld in rwms
http://hostname:9001/forms/frmservlet?config=rwms1324inst_hh
we are login with USERID: PAR3214
PASSWD:PAR3214
FACILITY ID : PR
Now, if we press CTRL+F4, it is login
My requirment is to change the login option. Instead of CTRL+F4, it should be mapped to something else like "SHIFT+F4" particularly for RWMS hand held applications.
Regards,
Ratnesh

Hi Ratnesh
RWMS 14.1 Install Guide ( http://docs.oracle.com/cd/E12456_01/rwms/pdf/141/rwms-141-ig-05.pdf ) has good details on this:
Update fmrweb.res for Keymapping
The fmrweb.res file is used to specify key-mapping for the radio frequency devices that are set up in the formsweb.cfg file.
1. Depending upon device this file may need to be updated.
2. The installer places a copy in the directory specified in the formsweb.cfg file for each radio frequency URL that is created
3. The fmrweb.res file comes with key-mapping of CTRL+<number> to work for function keys by default.
This fmrweb.res is passed as a parameter in formsweb.cfg as otherparams variable.
Thanks
Amod

Change Pointers not being created for HR-PA Custom Infotype

Problem Description:
We have a custom Infotype in SAP to store the data for contingent employee - Infotype 9001. Change pointers is
turned on. We are running the program RBDMIDOC to send changes to Oracle IDM using message HRMD_A. The change
detected for all infotypes except 9001. For 9001, the change pointer is not created.
The following are the current configuration details:
IDOC Extension Created to Idoc type HRMD_A07 (ZHR_EXT)
custom segment zhr_seg
Change pointers are switched on.
Change pointers switched on for message Type HRMD_A.
IDOC configuration created for Port / Process code etc.
Maintenance of view T777D - Added ZHR_SEG.
If I add the segment ZHR_SEG as a 2nd segment to Infotype 0000, I dont get a syntax error. But the changes for Infotype 9001 are not picked up.
If I add the segment ZHR_SEG as a segment to Infotype 9001, I get a syntax error - check EDI: Syntax error in IDoc (mandatory segment missing) below.
EDI: Syntax error in IDoc (mandatory segment missing)
Message no. E0072
Diagnosis
The segment ZHR9001 has the attribute 'Mandatory' in the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
This error may have been triggered by an unidentifiable segment before the expected mandatory segment.
Procedure
Please check the IDoc or the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT).

Were you able to resolve the issue?
If yes, could you please share what was done to resolve it.
Your help will be greatly appreciated.

I uploaded a new website in spanish and when it went online, some of the fonts changed, for example: " álbum" changed to "Ã¡lbum", what am I doing wrong?

I´m having problems when publishing the website online, i´m writing in spanish and when it shows online the fonts change for example:
" álbum" changed to "Ã¡lbum"
somo other signs also change but i`m more concern about this one because in spanish is used a lot.
any help?

See if this helps, second part :
http://iweb.dailynews.webege.com/PHP_parse_error.html

Keep being asked for password: Mail Help unhelpful

Last week I had to trash my keychains/passwords on the recommendation of Skype help. It solved my immediate problem but now I get asked for a password every time I launch Mail.
I've tried Mail help and got the following advice:
"To change the keychain lock settings:
Open Keychain Access, located in Applications/Utilities (or click the link provided on this page).
Select your login keychain, choose Edit > "Change Settings for Keychain 'login'."
To reduce the number of requests for your keychain password, deselect the option for the number of minutes of inactivity before the keychain is locked, or increase the number of minutes. You can also deselect "Lock when sleeping" option."
Trouble is, I see nothing that resembles a "login keychain".
Is the above the advice I need. If yes, what/where is my login keychain; if no, what now?

Thanks for the feedback. This means the login keychain itself was "there", just inaccessible for some reason. The actual keychains are stored in one of the following locations, depending on their applicability:
/System/Library/Keychains/
/Library/Keychains/
~/Library/Keychains/
login, in particular, being different for each user, is stored in ~/Library/Keychains/.
On my system, the System keychain is stored in /Library/Keychains/. Do you see a System keychain in more than one of the aforementioned locations? Maybe that's the reason you see more than one instance of it in Keychain Access.
I'm wondering now if the problem was just that there was something wrong with the ~/Library/Preferences/com.apple.keychainaccess.plist preferences file. Guess we'll never know what happened here.
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder. You can easily locate any of the folders referred to in this post by copying the file path here, doing Go > Go to Folder in the Finder, and pasting the file path there.

Java Mapping for JDBC Interface

Hi,
please help on java mapping for my jdbc interface.
my java code for jdbc is:
Created on May 7, 2008
TODO To change the template for this generated file go to
Window - Preferences - Java - Code Style - Code Templates
package XiMappingDB2.com.xi.test;
@author miracle
TODO To change the template for this generated type comment go to
Window - Preferences - Java - Code Style - Code Templates
Created on May 2, 2008
To change the template for this generated file go to
Window>Preferences>Java>Code Generation>Code and Comments
package com.xi.test;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.Statement;
import java.util.HashMap;
import java.util.Map;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import com.sap.aii.mapping.api.AbstractTrace;
import com.sap.aii.mapping.api.MappingTrace;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import com.sap.aii.mapping.api.StreamTransformationException;
@author kotla
To change the template for this generated type comment go to
Window>Preferences>Java>Code Generation>Code and Comments
public class NameMerge implements StreamTransformation {
     private Map param = null;
     private MappingTrace trace = null;
     public void setParameter(Map param){
     this.param = param;
     if (param == null) {
     this.param = new HashMap();
     public void execute(InputStream input, OutputStream output)
     throws StreamTransformationException {
     AbstractTrace trace = null;
     String RESULT = new String();
     trace =
     (AbstractTrace) param.get(
     StreamTransformationConstants.MAPPING_TRACE);
     try {
    //Create DOM parser
    DocumentBuilderFactory factory =
    DocumentBuilderFactory.newInstance();
    DocumentBuilder builder = factory.newDocumentBuilder();
     //Parse input to create document tree
     Document doc = builder.parse(input);
                trace.addInfo(doc.toString());
      //          Map the elements
    Node root = doc.getFirstChild(); // gets the root element
     NodeList children = root.getChildNodes();
      for (int item = 0; item < children.getLength(); item++) {
      if (children.item(item) instanceof Element) {
      root = (Element) children.item(item);
      NodeList ch = root.getChildNodes();
      RESULT = RESULT.concat(ch.item(0).getNodeValue() + " ");
      trace.addInfo(RESULT); }
      catch (Exception e) {
           trace.addDebugMessage(e.getMessage());
   //Return the output document
   String document_exit = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><ns0:Person2 xmlns:ns0=\"urn:xxxxx.com:test:mapping:lookups\"><RESULT>"
   + RESULT
   + "</RESULT></ns0:Person2>";
     insertDB(RESULT);
   try
        output.write(document_exit.getBytes());
         catch (IOException e1) {
        trace.addDebugMessage(e1.getMessage());
public void insertDB(String DETAILS){
    Statement stmt = null;
    Connection conn = null;
    try {
      conn = getConnection();
      conn.setAutoCommit(false);
      stmt = conn.createStatement();
      stmt.execute("insert into KUMAR(DETAILS) values ('"DETAILS"')");
      //System.out.println ('"DETAILS"');
      conn.commit();
      stmt.close();
      conn.close();
    } catch (Exception e) {
      System.err.println("Error: " + e.getMessage());
      e.printStackTrace();
public Connection getConnection() throws Exception {
    String driver = "com.ibm.db2.jcc.DB2Driver";
    String url = "jdbc:db2://172.17.4.24:50000/SAMPLE";
    String username = "miracle";
    String password = "sairam";
    Class.forName(driver);
    Connection conn = DriverManager.getConnection(url, username, password);
    return conn;
but we are getting the following error:Linkage error occurred when loading class JavaDatabaseApp/XiMappingDB2/com/xi/test/NameMerge (http://FILE2JDBC_US, 7d7b3141-f4d1-11dc-b25e-d5d5c0a80198, -1)
Start of test
LinkageError at JavaMapping.load(): Could not load class: JavaDatabaseApp/XiMappingDB2/com/xi/test/NameMerge
java.lang.NoClassDefFoundError: JavaDatabaseApp/XiMappingDB2/com/xi/test/NameMerge (wrong name: XiMappingDB2/com/xi/test/NameMerge) at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:539) at java.lang.ClassLoader.defineClass(ClassLoader.java:448) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingLoader.findClass(RepMappingLoader.java:175) at java.lang.ClassLoader.loadClass(ClassLoader.java:289) at java.lang.ClassLoader.loadClass(ClassLoader.java:235) at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.load(RepJavaMapping.java:136) at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.execute(RepJavaMapping.java:50) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.transform(MapServiceRemoteObjectImpl0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170).
please solve this issue.

Uday,
May be you have uploaded class file into external definitions.
You need to Zip the class file into .jar and then upload into external definitions of integration repository
Regards,
Kiran Bobbala

Adapter Status Error : Error in creating message ID map for JMS message:

Currently in the SAP XI 3.0 JMS Adapter, I am receiving the following error
Error in creating message ID map for JMS message:
ie. Error while processing message 'de8265f6-c864-4479-1137-9bab17b78b3b'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Error in creating message ID map for JMS message: ID:c3e2d840d8d4d7f14040404040404040c44f8e2213630b01 at com.sap.aii.adapter.jms.core.channel.filter.InboundDuplicateCheckFilter.filter(InboundDuplicateCheckFilter.java:103)
Although I am receivng this error, when I check the details of the message processing, all steps are successful and the message is set to status : DLVD
Audit Log for Message: de8265f6-c864-4479-1137-9bab17b78b3b
Time Stamp     Status     Description
09.06.2009 13:27:24     Success     New JMS message with JMS message ID ID:c3e2d840d8d4d7f14040404040404040c44f8e2213630b01 received. The XI message ID for this message is de8265f6-c864-4479-1137-9bab17b78b3b
09.06.2009 13:27:24     Success     JMS message converted to XI message format successfully
09.06.2009 13:27:24     Success     RRB: entering RequestResponseBean
09.06.2009 13:27:24     Success     RRB: suspending the transaction
09.06.2009 13:27:24     Success     RRB: passing through ...
09.06.2009 13:27:24     Success     RRB: leaving RequestResponseBean
09.06.2009 13:27:24     Success     Transform: using Transform.Class: com.sap.aii.messaging.adapter.Conversion
09.06.2009 13:27:24     Success     Transform: transforming the payload ...
09.06.2009 13:27:24     Success     Transform: successfully transformed
09.06.2009 13:27:24     Success     Application attempting to send an XI message synchronously using connection JMS_http://sap.com/xi/XI/System.
09.06.2009 13:27:24     Success     Trying to put the message into the call queue.
09.06.2009 13:27:24     Success     Message successfully put into the queue.
09.06.2009 13:27:24     Success     The message was successfully retrieved from the call queue.
09.06.2009 13:27:24     Success     The message status set to DLNG.
09.06.2009 13:27:25     Success     The application sent the message synchronously using connection JMS_http://sap.com/xi/XI/System. Returning to application.
09.06.2009 13:27:25     Success     The message was successfully transmitted to endpoint http://sapxia.swets.nl:8000/sap/xi/engine?type=entry using connection JMS_http://sap.com/xi/XI/System.
09.06.2009 13:27:25     Success     The message status set to DLVD.
Not sure why this is occurring.......

No, not using correlation id.
I was able to resolve the issue on this queue by changing the following setting
Under the PROCESSING tab, under XI SETTINGS
Time period for Duplicate Check for EO(IO) (secs) it was set to 86400
I have changed this to 300 seconds and the adapter has now gone green.
BUT......
That said, I have the exact scenario on another sender JMS channel set to 300 seconds and it exhibits the same issue.
correlation settings:
Set XI message id to = GUID
Set Xi conversation

Wrong Channels Being Mapped for 5.1 - Changing Has No Effect.

Similar Messages

Maybe you are looking for