Wrong Chinese character

In my Nokia 5800, v21.0.101, the Chinese character "福" is wrongly displayed in the traditional Chinese character format. The same word should be identical with the simplified Chinese character format, which is correctly displayed in the same handset.
A lot of Chinese folks treasure their culture a lot, and such a mistake may not be tolerable to them.
Joe Chan

You should report this to Nokia via the "contact us" tab at the top of the page. Nokia does not monitor these forums for bugs or issues.
Ravi

Similar Messages

Wrong chinese character in place of u00B5F

Hello All,
We converted SAP 4.7 sp 63 to Unicode.
During vocabulary maintenance there were 1500 collisions.
for µF it was language ZH assigned.
Now, after unicode conversion material description in sales order is incorrect.
(i.e. PCC LP 4500礔 DC 900V instead of PCC LP 4500µF DC 900V).
But intreastingly the description for same material in tables MARA, MAKT is correct.
it is only wrong in VBAP.
when i am trying to correct it using SUMG it is not getting corrected.
what would be the solution for this.
as of now i only think of possible solution to correct language assignment in vocabulary before Unicode.
Experts please help.
Thanks
Harshavardhan.

Hi Harshavardhan,
MARA and VBAP are language independent.
MAKT is language dependent.
Therefore for MAKT, the system uses the language key. If it is EN, then in a standard MDMP system, the entry is converted properly.
For MARA and VBAP, the system uses the vocab info.
Now it could be that in VBAP the word is assigned to ZH and for MARA to EN.
So the main question is whether 礔 is a valid Chinese word, which also appears in the according tables ?
If not, I would correct the vocab info (and assign EN consistently).
However independent of that, you should be able to repair the entry.
You have to add the table manually in SUMG, select the according entry / entries and do the repair.
Best regards,
Nils Buerckel
SAP AG

Problem with chinese character for dot matrix epson LQ-1600K III

Hi All,
I really runs out of idea about my problem now. The problem is about Print Chinese character to dot matrix printer (Epson LQ-1600K III). I tried to so many device type to solve this issue, looks like the only device type can be use are CNSAPWIN and CNEPSON with CNSONG font type. The others if I print to the printer, the chinese character became # (although in the print preview it`s okay and display correctly).
Here is the bottleneck if I use CNEPSON:
- if I have 2 window at the left and right position, if the left window has chinese character, the right window automatically shift right about 1.5 CM, which is damn weird!!! Can somebody help me
- I tried so many ways to adjust the line size for my detail window (to cater positioning at pre-printed boxes), but looks the font size always become 10pt and line size cannot be adjustable (based on smartstyle).BUT if I used device type epescp2, it can be done!
Here is the bottleneck if I use CNSAPWIN:
- I need to create format type in windows and SAP (SPAD). and every PC that use this printer, must define the Paper size ( China Special paper size 12inch)
- I also think this is not a good idea because as I far as I know this is not the correct way..
Therefore, if somebody has experience about printer chinese character to dot matrix for Smartform and sapscript..please kindly help me give some advice.
Do I use the wrong device type?
Thanks in advance!
Regards,
Willy

Hi friends , we are using the same model ....
Are you using the chinese version operation system ? because we can print the chinese charaters without problem in LQ 1600KIII .....
We are using CNSAPWIN device type + Frondend printing access method ....
Carlos Zhang

Sender proxy to sap pi -chinese character

Hi experts,
I am having a scenario sender proxy to sap pi. Via the proxy , some chinese character are send into sap pi and during my sxmb_moni the receiver ( inbound message payload) is in BOXES. I tried to debug the proxy and it is sending chinese characters to sap pi but only problem when it arrives to sap PI it becomes into Boxes.
I have done researc and they have mention to use RFC Unicode. I have configured but it is the same problem into boxes.
Please help me. PLZ..

Hi Mark,
Thanks a lot for your reply. Basically it is Abap proxy. Do you think it is possible to use UTF-8 or UTF16 in your XML encoding for abap proxy. I am not so good in abap proxy and it is generated by abaper. Pleae advise me if i am wrong..

Chinese Character cannot be decoded

hi,
I would like to implement two JSP pages. The first JSP is just a html form, which is used to submit unicoded chinese data to a target JSP file.
The target JSP file received those data and display.
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> is added in the first JSP file. As a result, data will be submitted in UTF-8 format.
In target JSP, I used the following code to recieve and decode data:
<%@ page contentType="text/html; charset=UTF-8" %>
<%
String para = request.getParameter("para"); // where para is name of received parameter
byte[] bytes = para.getBytes();
para = new String(bytes, "UTF-8");
out.println("Recieved character: " + para);
%>
My Problem:
After I submitted chinese characters from the first JSP file, only some of them can be displayed on target JSP. Some of those characters are missing.
For example, when I input "�@", target JSP can display the character. On the other hand, when I input "�p", nothing is displayed. But I know that variable "bytes" stored 3 bytes for each chinese character. I would like ask why
para = new String(bytes, "UTF-8");
cannot encode properly. Is anything wrong about my coding?
Thx

More information can be provided.
OS: Windows 2000 server
web server: iPlanet
P.S. : I have set the Character set to UTF-8 in iPlanet.
thx.
hi,
I would like to implement two JSP pages. The
The first JSP is just a html form, which is used to
submit unicoded chinese data to a target JSP file.
The target JSP file received those data and
and display.
<meta http-equiv="Content-Type"
ype" content="text/html; charset=UTF-8"> is added in
the first JSP file. As a result, data will be
submitted in UTF-8 format.
In target JSP, I used the following code to
to recieve and decode data:
<%@ page contentType="text/html; charset=UTF-8"
F-8" %>
<%
String para = request.getParameter("para"); //
// where para is name of received parameter
byte[] bytes = para.getBytes();
para = new String(bytes, "UTF-8");
out.println("Recieved character: " + para);
%>
My Problem:
After I submitted chinese characters from the
m the first JSP file, only some of them can be
displayed on target JSP. Some of those characters are
missing.
For example, when I input "�@", target JSP can
P can display the character. On the other hand, when I
input "�p", nothing is displayed. But I know that
variable "bytes" stored 3 bytes for each chinese
character. I would like ask why
para = new String(bytes, "UTF-8");
cannot encode properly. Is anything wrong about my
coding?
Thx

Retrieve the unicode from a chinese character stored in MS Access database

Hi,
I have a table in MS Access database with chinese character. When I read it from my sql queries I get the "?" instead of the chinese character. When I calculate the unicode I get the 003F which is the unicode for the questionmark. How do I get the correct unicode of the chinese character?
Connection conn = DriverManager.getConnection("jdbc:odbc:myDB"); Statement stmt = conn.createStatement(); String sqlString = "SELECT Char FROM MyTable WHERE id=2"; ResultSet rs = stmt.executeQuery(sqlString); String s1 = rs.getString("Char"); // the s1 is the ? instead of the chinese character. byte[] b = s1.getBytes(Charset.forName("UTF-16")); int firstByte = 0; short anUnsignedByte = 0; String unicode = ""; for(int n = 0; n < b.length; n++){ String temp = ""; firstByte = (0x000000FF & ((int)b[n])); anUnsignedByte = (short)firstByte; temp = Integer.toHexString(anUnsignedByte); if(temp.length() == 1){ temp = "0" + temp; } unicode = unicode + temp; } unicode = unicode.substring(4); System.out.println("unicode: " + unicode); //Here I get the unicode, 003f, for the question mark.

Apparently getString() is already applying the wrong encoding to the bytes which are in the data, so you can't do anything with what it returns. (This isn't surprising since it's Access you are asking about.) I suggest using the getObject() method and see what it returns. If it returns the same string then you are out of luck. But maybe you'll get lucky and it will return an array of bytes containing the correct data. Don't get too hopeful though.

How can i convert jstring to PSTR with chinese character

Hi all,
I'm not an expert of C++. So please help me to fix the following problem.
I'm using jni to call the dll. In java side, the input parameter is jstring. In C++ side, the input parameter of PrintDrugReceipt are PSTR.
The following is the code of my C++:
#include <windows.h>
#include <stdio.h>
#include <jni.h>
#include "DrugReceiptWrapper.h"
#include "DrugReceipt.h"
const char * JNU_GetStringNativeChars(JNIEnv *env, jobject obj, jstring jstr) {
jbyteArray bytes = 0;
jthrowable exc;
     jclass cls;
     jmethodID getBytes;
char *result = 0;
if ((*env)->EnsureLocalCapacity(env, 2) < 0) {
return 0; /* out of memory error */
     cls = (*env)->GetObjectClass(env, obj);
     getBytes = (*env)->GetMethodID(env, cls, "getBytes","()[B");
     //jbyteArray buf = (jbyteArray*)(*env)->CallObjectMethod(env, obj, jlprSourceChiName, getBytes);
     bytes = (*env)->CallObjectMethod(env, jstr, getBytes);
     exc = (*env)->ExceptionOccurred(env);
     if (!exc) {
         jint len = (*env)->GetArrayLength(env, bytes);
         result = (char *)malloc(len + 1);
         if (result == 0) {
             //JNU_ThrowByName(env, "java/lang/OutOfMemoryError", 0);
             (*env)->DeleteLocalRef(env, bytes);
             return 0;
(*env)->GetByteArrayRegion(env, bytes, 0, len, (jbyte *)result);
result[len] = 0; /* NULL-terminate */
} else {
(*env)->DeleteLocalRef(env, exc);
(*env)->DeleteLocalRef(env, bytes);
return result;
JNIEXPORT jlong JNICALL
Java_TestPrint_PrintDrugReceiptWrapper(
JNIEnv *env, jobject obj,
jstring jlprPrinterPort, jstring jlprSourceChiName,
jstring jlprTargetChiName, jstring jlprPrintData1,
jstring jlprPrintData2, jstring jlprCaseNo, jstring jlprReceiptNo){
     PSTR lprPrinterPort;
     PSTR lprSourceChiName;
     PSTR lprTargetChiName, lprPrintData1;
PSTR lprPrintData2 , lprCaseNo, lprReceiptNo;
     printf("before %s", jlprSourceChiName);
     lprPrinterPort = (*env)->GetStringChars(env, jlprPrinterPort , 0);
     lprSourceChiName = (*env)->GetStringChars(env, jlprSourceChiName, 0);
     lprTargetChiName = (*env)->GetStringChars(env, jlprTargetChiName, 0);
     lprPrintData1 = (*env)->GetStringChars(env, jlprPrintData1 , 0);
     lprPrintData2 = (*env)->GetStringChars(env, jlprPrintData2 , 0);
lprCaseNo = (*env)->GetStringChars(env, jlprCaseNo , 0);
     lprReceiptNo = (*env)->GetStringChars(env, jlprReceiptNo , 0);
     PrintDrugReceipt(lprPrinterPort, lprSourceChiName, lprTargetChiName, lprPrintData1, lprPrintData2, lprCaseNo, lprReceiptNo);
     (*env)->ReleaseStringChars(env, jlprPrinterPort , lprPrinterPort);
     (*env)->ReleaseStringChars(env, jlprSourceChiName, lprSourceChiName);
     (*env)->ReleaseStringChars(env, jlprTargetChiName, lprTargetChiName);
     (*env)->ReleaseStringChars(env, jlprPrintData1 , lprPrintData1);
     (*env)->ReleaseStringChars(env, jlprPrintData2 , lprPrintData2);
     (*env)->ReleaseStringChars(env, jlprCaseNo , lprCaseNo);
     (*env)->ReleaseStringChars(env, jlprReceiptNo , lprReceiptNo);
     return 1;
the h file:
/* DO NOT EDIT THIS FILE - it is machine generated */
#include <jni.h>
/* Header for class TestPrint */
#ifndef _Included_TestPrint
#define _Included_TestPrint
#ifdef __cplusplus
extern "C" {
#endif
* Class: TestPrint
* Method: PrintDrugReceipt
* Signature: (Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)J
JNIEXPORT jlong JNICALL Java_TestPrint_PrintDrugReceiptWrapper
(JNIEnv *, jobject, jstring, jstring, jstring, jstring, jstring, jstring, jstring);
#ifdef __cplusplus
#endif
#endif
Note: the jstring input parameters are the chinese character. If i print out the jstring, it will display dirty character, why? and how to fix it? and the PrintDrugReceipt will expected accept the chinese character and print it to the printer.
Thank you for you guys help.
Matthew

you can't use char...have to use a wchar....and look around at the wide character handling function in C/C++.

Acrobat Reader cannot display Traditional Chinese Character correctly in 64 bit Windows 7

Hi,
I get a pdf file cannot display chinese character properly in Windows 7 64 bit but Windows XP 32 bit. I did uninstall and re-install Reader 9.4.3 and 10.0.1 with and without Traditional Fonts patch in the 64 bit machine but no luck. Does anyone have a solution for this?
Thanks in advance.

I run Acrobat 9.3.3 on my Windows 7 Pro 64-bit system with no problems. Perhaps you should make sure you have all of Acrobat 9's maintenance installed.
Ken Friedman

Data upload Vendor Master Chinese character from Excel does not upload

Hi Gurus,
We are trying to upload Vendor Master from Excel sheet.
The Chinese characters in excel sheet is not getting uploaded.
After upload, we see in SAP as ????? for these Chinese character.
Could any one inform what setting I may need to change?
Thanks and Best Regards,
Mohan

Hi Bala,
Goto he Initial screen of SAP and click the ALT+F12 costomizating of local setup.the choose the options-->choose the I18N Tab in that POP up and check the Activate the multi byte support.
press Apply and OK.
close the SAP Log on and Re-loag on.if u r not closing the Logon screen the changes wiil not effect.
or
click on the log on SAP and choose the server name -->right click ->Properties>chose the log on language as chanies .-->Apply and Logon.
Now u can eassily Upload to the Excel in checnies language.
Thanks & REgards,
Nelson.

GUI Download Chinese Character to Excel gibberish character

Hi Experts,
I'm facing a problem where I'm using FM gui_download to save Chinese Character into Excel file.
Upon double click to open the excel file, funny character shows up.
But if I were to open the same file using a blank Ms Excel application (Go to File->Open->choose file),
Excel will prompt me to select a proper encoding (GB2312 in this case), and the Chinese character can be seen thereafter.
But, my user doesn't want to go through this.
I've browsed through the forum and someone has posted about this before and it's unanswered.
How to download the chinese character using GUI_DOWNLOAD - unanswered
And, Re: GUI_DOWNLOAD give 2 bytes for each chinese character - I need fixed len which is not related to my problem.
Below is my code:
DATA: lv_codepage   TYPE cpcodepage,
        lv_char_cpage TYPE abap_encod,
        lv_encoding   TYPE abap_encod.
Get Code Page for Chinese Character Spras = '1' or 'ZH'
CALL FUNCTION 'NLS_GET_FRONTEND_CP'
    EXPORTING
      langu                 = '1'   " Chinese Simplified Table T002
      fetype                = 'MS' " Manufacturer is Microsoft Table TCP05
    IMPORTING
      frontend_codepage     = lv_codepage
    EXCEPTIONS
      illegal_syst_codepage = 1
      no_frontend_cp_found = 2
      internal_or_db_error = 3
      OTHERS                = 4.
Conversion c(4) = n(10)
lv_char_cpage = lv_codepage.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = p_file
      filetype                = 'DAT'                       "tried ASC and not working as well
      codepage                = lv_char_cpage   "8404 in this case tried 8400 and same result
      replacement             = '#'
      write_field_separator   = 'X'
    TABLES
      data_tab                = i_data_cnvr        "table content
      fieldnames              = i_data_head      "table header
Please help. Does this has something to do with utf-8 encoding?
Thank you.
Thanks,
ZY See

Hi Nitesh,
Is there a way to check the Excel codepage? Do you mean by codepage = 936 for GB2312 encoding?
Anyway, this issue is fixed. Issue is related to unicode system.
Below codes for gui_download solved the problem.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = p_file
      filetype                = 'DAT'
      codepage                = '4103'
      replacement             = '#'
      write_field_separator   = 'X'
      write_bom               = 'X'
    TABLES
      data_tab                = i_data_cnvr
      fieldnames              = i_data_head
Codepage = 4103 for utf-16 Unicode system.
Write-bom = 'X' to write Byte-Order-Mark.
Thanks,
ZY See

GUI_DOWNLOAD give 2 bytes for each chinese character - I need fixed length

Due to the Unicode system takes each Chinese character as a byte, the field(10) can take 10 Chinese Characters, not like before only 5 characters allowed.
The problem is when the data is downloaded to a txt file. Some records contains only Western Europe charactes and will fill 10 bytes in the output file and other records contains only Chinese characters and will fill up 20 bytes in the output file.
The data is exported for a system that can upload chinese characters, but only allow fixed record length file (always 10 bytes).
In other words: the records with Western Europe characters should contain 10 characters = 10 bytes but the records with Chinese characters should only contain 5 characters = 10 bytes.
Anyone who can solve this, thanks in advance.
My code:
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
    EXPORTING
      FILENAME                = p_file
      CONFIRM_OVERWRITE       = 'X'
      codepage                = '8400' "Chinese
    CHANGING
      DATA_TAB                = it_output
    EXCEPTIONS

Hi Thomas,
Now I understand.
Pl. check the class CL_ABAP_CONV_X2X_CE.
May it can help u.
Here is it's documentation.
CL CL_ABAP_CONV_X2X_CE
Short Text
Code Page and Endian Conversion Between External Formats
Functionality
Instances of the class CL_ABAP_CONV_X2X_CE allow you to convert text data between different character sets and numeric data between different number formats (byte order).
Using the class corresponds to transforming data from a binary input stream to a binary output stream: The data objects are read from the input buffer sequentially and written to an output buffer.
The class methods are normally used as follows:
CL_ABAP_CONV_X2X_CE=>CREATE
This creates a conversion instance. Among other options, you can specify the following as parameters: The input buffer (that is the binary string that contains the data to be read), the character format at used in the input buffer, the byte order used in the input buffer, the character format to be used in the output buffer, or the byte order to be used in the output buffer.
CONVERT_C, CONVERT_...
This converts the data. Calling this method several times consecutively allows you to read data from the input buffer sequentially and add it to the end of the output buffer.
GET_OUT_BUFFER
This gets the output buffer, making it available for further processing (such as writing to a file, sending using RFC).
RESET
This allows you to reset individual attributes of the conversion instance. (This method is especially designed for restarting on a new input buffer and deleting the output buffer while retaining the remaining attributes.)
Relationships
CL_ABAP_CONV_IN_CE
Converting Binary Data into ABAP Data Objects
CL_ABAP_CONV_OUT_CE
Converting ABAP Data Objects to a Binary Format.
CL_ABAP_CHAR_UTILITIES
Various Attributes and Methods for Character Sets and Byte Order
Example
In the following example, UTF-8 texts are converted to the codepage 1100 (Latin-1) and numbers are converted from little-endian to big-endian format:
DATA:
in_buffer TYPE XSTRING,
out_buffer TYPE XSTRING,
conv TYPE REF TO cl_abap_conv_x2x_ce.
in_buffer = '414220C3B602010000'.
conv = cl_abap_conv_x2x_ce=>create(
         in_encoding = 'UTF-8'
         in_endian = 'L'
         out_encoding = '1100'
         out_endian = 'B'
         input = in_buffer
CALL METHOD conv->convert_c( n = 5 ).
CALL METHOD conv->convert_i( ).
out_buffer = conv->get_out_buffer( ).
The content of the in_buffer variable is made up of 5 bytes (hexadecimal "414220C3B6"), which represent 4 UTF-8 characters (A, B, SPACE, o-Umlaut), and 4 bytes (hexadecimal "02010000"), which represent the value 258 in little-endian format. This data is converted and the out_buffer variable now contains the hexadecimal string "414220F600000102". It is made up of:
4 bytes (hexadecimal "414220F6"), which represent the above 4 characters in codepage 1100 (ISO-8859-1). Note that the length specification n = 5 refers to the number of elementary characters to be converted. For multi-byte codepages like UTF-8 this means that the multi-byte character "C3B6" is counted in length 2.
4 Bytes (hexadecimal "00000102"), which represent the value 258 in big-endian format.
If you have the desired byte order in the old format as expected by TRANSLATE ... NUMBER FORMAT (as an N(4) value), you can proceed as follows:
TYPE-POOLS: ABAP.
CLASS cl_abap_char_utilities DEFINITION LOAD.
DATA:
in_number_format(4) TYPE N VALUE '0101',
out_number_format(4) TYPE N VALUE '0000'.
DATA:
in_endian TYPE ABAP_ENDIAN,
out_endian TYPE ABAP_ENDIAN,
conv TYPE REF TO cl_abap_conv_x2x_ce..
in_endian = cl_abap_char_utilities=>number_format_to_endian(
               in_number_format
out_endian = cl_abap_char_utilities=>number_format_to_endian(
               out_number_format
conv = cl_abap_conv_x2x_ce=>create(
         in_encoding = 'UTF-8'
         in_endian = in_endian
         out_encoding = '1100'
         out_endian = out_endian
         input = in_buffer
Notes
For details refer to the documentation for the individual methods.
Regards,
Joy.

How to put Chinese character in jar file by java.util.jar.Manifest?

Now I want to develop a simple package tool which can modify some property in manifest.mf of jar files,but the Manifest class's putValue method only can correctly save English character.why?
And how can I put Chinese character?
the code is:
Attributes ab = mf.getMainAttributes();
ab.putValue("agent-Name", agent);

Attribute values can contain any character and it will be UTF-8 encoded when written to the manifest, according to Javadoc.
What makes you think that this mechanism fails? What do you see instead of the Chinese character? And what tool/editor/program you use to see it? I did not try myself, but according to the Javadoc there should be no problem.

Some of Chinese character is not displaying correctly in PDF output

Hi all
I'm involved in the 1st Peoplesoft project in Korea and having a difficulty with displaying Chinese character in PDF output.
Usually Koreans can translate their name in Chinese and that Chinese name is displayed in personal information in their company as well as Korean name.
With Oracle BI Publisher I made rtf template that includes employees' Chinese name and tried to export to PDF output.
Most of Chinese character was fine but '李' character that was ok in HTM output was crashed in PDF output.
So I researched and tested some solutions.
Here's what I did.
I downloaded and installed five fonts(ALBANWTS.ttf, ALBANWTT.ttf, ALBANWT.ttf, ALBANWTK.ttf, ALBANWTJ.ttf) in client machine(c:\windows\fonts\) and did mapping job with xdo.cfg configuration file.
After that I previewed PDF output in the rtf template and checked embeded fonts in the PDF file.
I can see the newly installed font was embeded but still '李' character is crashed.
My problem is little bit different from others becuase only one Chinese character is crashed by for now.
The Chinese character '李' is very common last name in Korea and I believe Simplified Chinese character font have in it.
Please let me know if you have any solutions or experiance.
Thanks and best regards
Kwangbock.

Hi James
Oh~ It perfectly works!!
I've been tried to solve this problem for a long time and
I really appreciate for your help~
Thanks~
Kwangbock.

Download data from db to CSV file and need to handle chinese character

Hi , all , I need to write to alow to export data from db to csv file, now the problem is some column is chinese character, in both db and web page it can dispaly the chinese, but in Csv I can't display chinese character, what should I do?
Thnak you

HJava wrote:
I already have res.setCharacterEncoding("UTF-8"); in my servlet, and db
req.setCharacterEncoding("UTF-8");
Are you sure that you have set it on the response? You do not need to set it on the request. Have you read the article? Do you understand the world of characters? It look like you still don't understand it.
by the way, since csv is text file , how can I bold my University number??? in sb = new StringBuffer();
sb.append("University Number");Not possible with CSV since it is text/plain. Use real XLS if you want to add formatting to cells.

Some chinese character file name not uploading in SharePoint Document Library?

Hi
Some Chinese character pdf file name not uploading in SharePoint Document Library. I am getting following error.
1. File not found error if i would upload using file browse option in Doc Lib.
2. Can't read from the source file or disk. if i would tried to copy and paste using "Open with explorer" options.
File name is "LA（未签署）.pdf"
Note: This file has been converted from "TIFF" to "PDF".
Thanks & Regards
Poomani Sankaran

Hi Poomani,
For troubleshooting your issue, please let's verify the followings:
Whether other pdf file which are not converted from "TIFF" and contain Chinese char could be uploaded into the SharePoint Document library.
Whether other pdf file which are converted from "TIFF" and don't contain Chinese char could be uploaded into the SharePoint Document library.
Please upload these pdf files into other libraries, compare the result.
Please check the log file to find more information about this issue. The path of the log file is:
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Wrong Chinese character

Similar Messages

Maybe you are looking for