Wrong color distribution after update

I updated my macbook pro early 2011 to ver. 10.9.5 a couple of days ago, and since then the color distribution is partially wrong, some colours replaced by basic colours like yellow blue and purple. (I tried to take a screen shot to show what it looks like but the problem disappears on other devices...) It appears everywhere on the screen regardless of application. Essentially nothing had been changed except this update.

ok after restarting my computer several times it disappeared. Thank you anyway.

Similar Messages

  • Wrong color profile after export - what am I doing wrong?

    I'm a beginner in color management and color profiles and I have a problem with my exported files from AE CS6 (german version):
    In my project settings I've set the working space to "adobe RGB (1998)" which is the same like my footage (JPEG Image-Sequence).
    In my Output Module Settings I've set it also to the working space "adobe RGB (1998)".
    I' ve tried to export it as h.246 and AVI.
    And now the Problem: the exported clips are too bright and washed out. First I thought it is a problem with the Windows Media Player, but I imported the clips again to after effects and the showed Profile is now "HDTV (Rec. 709) Y'CbCr". This is the case with the h.246-clips. The AVI-Clips showed the profile "sRGB IEC61..." So the settings from the Output Module didn't seem to work.
    The washed-out-effect disappeared after I set everything to HDTV, but I don't think this is the right way to go..
    Thank you for any help

    Simple, really: You are using a) a wrong color space b) your system is not calibrated, but you have color management enabled and c) use formats that don't support color management. This is simply wrong from stem to stern, especially with regards to b) and c). Why would you even use Adobe RGB when video works on Rec 709 or even more generic sRGB? I think you do not even understand the point of CM on a fundamental level. you don't dictate the color space by your source files, you simply import them into your working color space - regardless of whatever it is set to. The color metrics engine will apply any corrections necessary based on the associated/ embedded profiles, which ultimately is the whole point. Conversely, enabling CM for output will require a format that actually uses those corrections, which comes down to only a handful. so to cut a long story short: Unless you are willing and technically able to establish a proper CM workflow simply leave it off and just use the default sRGB that AE ever has used.
    Mylenium

  • Color issues after update to 10.4.9

    Has anyone discovered color printing (images) after the 10.4.9 update? ColorSync was updated as stated here: http://docs.info.apple.com/article.html?artnum=305214.
    I personally swear that I have onscreen proofing go bad using Aperture with a particular HP printer (8750). The other printer profiles appear to be ok. I cant prove this, but hope to find other users with the same issue (if it exists).

    Did you find out anything about this? I'm having exactly the same problems with Aperture and 10.4.9. Onscreen proofing is completely useless for all profiles supplied by HP (I have a B9180 printer). It might of course be an issue with these particular profiles, but odd thing is that it's only the screen rendering that looks wrong (yellow or reddish cast) while the prints looks just great.

  • Oh no! Something has gone wrong... after update

    Hi all!
    Yesterday I updated my Arch with `pacman -Syu`. After reboot all gone fine until GDM load. From now on I get background briefly displayed and after 1 second or so I get a screen with:
    Oh no! Something has gone wrong.
    A problem has occured and the system can't recover. Please contact a system administrator.
    ...and a picture of a monitor with sad emotion
    Not too informative.
    I've looked syslog, messages, dmesg, gdm logs and found nothing special in them. Trying to `rc.d stop gdm` spawns it again with same symphtoms.
    I have ThinkPad E420 (Intel graphics) if it matters.
    Where should I look to narrow down the problem? Thanks in advance.

    Omg, got it!
    I've fount something like:
    JS ERROR: !!! Exception was: Error: Argument 'text' (type utf8) may not be null
    JS ERROR: !!! lineNumber = '0'
    JS ERROR: !!! fileName = '"gjs_throw"'
    JS ERROR: !!! stack = '"("Argument 'text' (type utf8) may not be null")@gjs_throw:0
    ()@/usr/share/gnome-shell/js/ui/dateMenu.js:212
    in /var/log/gdm/:0-greeter.log and after few tries and errors I deduced the problem to a line in /etc/locale.conf
    export LC_TIME="ru_RU.UTF-8"
    I commented it out and voi-la, gnome started as usual. Crazy, crazy day…
    Now the question is still open. Have anybody ideas how could ever such thing stop GDM and Gnome from starting?! How could I return back my local date/time format?

  • Something wrong with pulseaudio after update

    Hi,
    After upgrading my packages pulseaudio won't work anymore.
    I can still open alsamixer and play sound purely on alsa when I delete the entries in /etc/asound.conf
    I'm really close to abandoning PA. Almost every update gives me problems...

    samoturk wrote:Can you just briefly explain how can such symlinking break my system? (if it's not too offtopic)
    The reason the number changed is because it's incompatible with the old version somehow. If you run into one of those incompatibilities, it will break something, and it might happen a long time later, once you've long forgotten you made the link. Then nobody will be able to figure out what's wrong, and you'll be very unhappy.

  • Color changes after update

    I have just upgraded to 10.4.10 this morning,
    Some of my Aperture library files have now taken on a "magenta hue", especially noticeable in the neutral area's. The files are Nikon D200.nef images.
    I have had made no other recent changes or upgrades to the system other this update.
    Is it possible that the upgrade to 10.4.10 could be responsible for this.
    iMac 24 inch 2.3Ghz Dual Core   Mac OS X (10.4.9)   3 GB Ram, GeForce 7600 GT

    Many thanks for your suggestion...it solved the problem
    It would appear that the update for some reason changed my screen profile from RGB 1998 in "Proofing Profile" to a media profile.
    Thanks for your help

  • Mail Doesn't Work (Wrong version message) after updating 10.5.3

    I just upgraded using software updater over the weekend and now Mail will not start. Error message is:
    "You cannot use this version of the application Mail with this version of Mac OSX.
    Ideas?

    nstalling Optional Installs (via the Mac OS X Install DVD)
    1. Locate the Mac OS X Install DVD that came with your computer.
    2. Insert the Mac OS X Install disc into the optical drive.
    3. A Mac OS X Install Disk window appears. Double-click the Optional installs folder.
    4. Double-click on the Optional Installs installer.
    If that doesn't work, Get Pacifist...
    http://www.charlessoft.com/
    then extract/install Mail from your 10.5.x Install Disk.
    Message was edited by: BDAqua

  • CS5 Samples Wrong Color

    I'm having issues with the eyedropper tool in Photoshop. I've found that after I add an adjustment layer, using the eyedropper tool on any given layer in the document will give me the wrong color. A color is sampled, but seems to be shifted in Hue/Saturation/Brightness from the original color on the layer. I've made sure that the tool is set to 'Point Sample' and 'Current Layer', but the issue persists until I restart Photoshop.
    I posted this question around two months ago, and have since followed advice and reformatted my Computer, upgraded the graphics driver, upgraded to Windows 7 from Vista, and installed the 12.0.1 Photoshop update. The error is exactly the same as before, leading me to believe that I can't be the only one experiencing this.
    Can anyone duplicate the issue on their setup? Any ideas on how to address it?
    Thanks very much.

    Have you tried turning off OpenGL? Sampling the wrong color only after a while would suggest it does this because it is not flushing a buffer or the card generally has a misconfiguration that prevents it from handling transparencies, so, if you will, after a while some "invisible pixel" obstructs the correct sampling region.
    Mylenium

  • Bootcamp disappears after updating to mavericks

    Hello all, i'm experiencing a lot of problems after updating to OS X Mavericks 10.9.4 especially with bootcamp.
    My bootcamp partition is greyed out in disk utility, access bootcamp,  i cant seem to mount it, delete the partition via bootcamp assistant. 
    I guess something went wrong in bootcamp after updating . i've been looking up all over the net trying to see if there are possible solutions to fix this problem.
    [REDACTED] sudo gpt -r -vv show /dev/rdisk0
    gpt show: /dev/rdisk0: mediasize=500107862016; sectorsize=512; blocks=976773168
    gpt show: /dev/rdisk0: Suspicious MBR at sector 0
    gpt show: /dev/rdisk0: Pri GPT at sector 1
    gpt show: /dev/rdisk0: Sec GPT at sector 976773167
          start       size  index  contents
              0          1         MBR
              1          1         Pri GPT header
              2         32         Pri GPT table
             34          6        
             40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
         409640  613765824      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
      614175464    1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      615445000       1528        
      615446528  361326592      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      976773120         15        
      976773135         32         Sec GPT table
      976773167          1         Sec GPT header
    [REDACTED] sudo fdisk /dev/disk0
    Disk: /dev/disk0 geometry: 60801/255/63 [976773168 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 -     409639] <Unknown ID>
    2: AF 1023 254  63 - 1023 254  63 [    409640 -  613765824] HFS+       
    3: AB 1023 254  63 - 1023 254  63 [ 614175464 -    1269536] Darwin Boot
    *4: 07 1023 254  63 - 1023 254  63 [ 615446528 -  361326592] HPFS/QNX/AUX
    Help please !

    Excellent work to get to this point. Were any of your partitions resized after Windows was already in place?
    Your table (and my cheat sheet) looks as following
    GPT 3 Start
    GPT 3 Size
    GPT 3 End
    NTFS Start
    Byte Offset
    NTFS Size
    NTFS End
    322675264
    1269536
    323944800
    323946496
    1696
    166287353
    490233849
    You need to use the following steps. If you see any error messages during the following steps, please stop and post back here with the error message.
    Rebuild using start/end offsets from Testdisk DeepSearch using GPT Fdisk (http://sourceforge.net/projects/gptfdisk/)
    Sudo gdisk /dev/rdisk0
    P  (print the full list of parts)
    D  (delete)
    4  (part 4)
    N  (new part)
    4   (part 4)
    323946496 - Start offset in bytes  (start point for Bootcamp part)
    +166287353 (Size offset as opposed to End offset)
    0700     (Windows part type)
    P           (print list of all parts just to see what changes will be made)
    W         (Write the new GPT)
    Y           (Yes! really write the new GPT)
       This will delete and re-write the GPT partition info for /dev/disk0s4.
    Rebuild MBR to match the new GPT information thus resetting the Hybrid MBR
    Sudo gdisk /dev/disk0
    P  (Print list of parts)
    R   (Recover)
    H (chooses Hybrid)
    Partitions numbers to be hybridized: 2 3 4
    Y (Good for GRUB question)
    N (part 2 flag)
    N (part 3 flag)
    Y  (part 4 flag make bootable partition)
    W  (Write the new MBR)
    Y    (Yes! write the new MBR)
    Reboot
    Test 1 - Does Bootcamp Volume show up in Finder?
    Test 2 - Can you see your files in Bootcamp Volume?
    Test 3 - Can you select Bootcamp in System Preferences -> Startup Disk?
    Test 4 - If Test 3 is successful, select Bootcamp and Click Restart.
    If you see a hanging underline cursor at the top left on a black screen, and it does not proceed further, you may need Windows Startup Repair or a tool called EasyBCD.

  • TS1702 What is wrong with Pages after the update?

    What is going on with Pages after the update?

    Hey George.iD, you wrote on 6 Feb 2014, this:
    Re: What is wrong with Pages after the update?in response to TRSPAGES
    What's wrong with it?
    As one thing after more-than a month later on 22 March, Pages _refuses_ to alter the color of text.  How maddening this is:  I select text, I select a crayon, but the text _remains_ black.  < Pages is Incorrigible! :-( >
    [After I vented steam, I feel better  --  until later.  What a cycle!  :-) ]

  • I purchased a Mac book pro in oct 2011, I restarted it after updating and it,s stuck on apple symbol, I hit command R while restarting and clicked on disk utility. It says disk can't be repaired, apple wants $249 to tell me what's wrong. Please help!

    I purchased a mac book pro in oct 2011, I restarted it after updating and it,s stuck on apple symbol, I hit command R while restarting and clicked on disk utility. It says disk can't be repaired, apple wants $249 to tell me what's wrong. Please help!

    What Apple store told you they wanted $249.00 to tell what is wrong?
    If this is a 13" Macbook Pro then that is the cost of the Extended Applecare warranty. As you are outside the 90 days of Free Phone Support then what Apple told you is that to get Phone Support you would either need to pay $45 per phone call or pay $249.00 for the Applecare extended warranty which comes with 3 years Free Phone Support from date of purchase.
    Or you can take it to a Apple Genius Bar and have them look at it for Free.
    Every Mac comes with 1 year warranty and includes only 90 days of phone support. You can buy the extended Applecare warranty anytime within the first year of ownership, IE until the 1 year warranty runs out.
    I suggest you have your computer looked at by either an Apple Authorized Repair Center or Genius Bar and then before the 1 year warranty runs out buying the extended warranty

  • After update lion 10.7.3 has something wrong with my screen

    hello, i have proplem with my screen, after updated lion to 10.7.3 has a line cross my

    I dont see anything wrong with the images you posted.

  • Invalid Color Space error after update Reader to 9.3.3

    After updating Adobe Reader to 9.3.3 I run into the Invalid Color Space error when trying to open a PDF file created with CorelDraw 12 in the format PDF/X-1A.  This format needed by a printing office to print the file. The strange thing is that Reader opens older PDF files exported from CorelDraw in thsi format normally without the error message.
    It happens only with PDF exports made after the Reader update. CorelDraw settings are as previously used.
    Exports in other formats, other than  PDF/x-1, X-1A and X-3 open normally.  How to solve this??

    any suggestions?

  • After updating 4.3.1 to 4.3.3 my i phone 4's wifi is not working 2 to 3 hrs of it ,but 3 hrs i was downloding free soft 4m itunes.............so what wrong with my phone

    after updating 4.3.1 to 4.3.3 my i phone 4's wifi is not working 2 to 3 hrs of it ,but 3 hrs i was downloding free soft 4m itunes.............so what wrong with my phone

    Thanks for reply,
    It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
    Iwish I have not upgraded.
    I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
    Thanks for your valued suggessions but it didn’tmade any difference to my situation.
    So now I have an ipod in the price of an iPhone4. Crap.
    Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users.

  • TS3274 My Ipad has a black background now and everything is color faded after the latest software update?  I restored and reset the Ipad.  How can this be fixed?

    My Ipad has a black background now and everything is color faded after the latest software update?  I restored and reset the Ipad.  How can this be fixed?

    How much data is being backed-up from each Mac?  (see what's shown for Estimated size of full backup under the exclusions box in Time Machine Prefs > Options).
    Is there any other data on your Time Capsule, besides the backups?
    Most likely, there just isn't room.  Time Machine may be trying to do a very large (or full) backup of one or both Macs, and can't.  Since it won't ever delete the most recent backup, there has to be enough room for one full backup plus whatever it's trying to back up now, plus 20% (for workspace).
    Also see #C4 in Time Machine - Troubleshooting for more details.

Maybe you are looking for