Wrong Confirmations giving error in DP90

Hi,
I have done some labour hour confirmations confirmations againt the service order. Out of all these confirmations some time confirmations are with wrong activity type. These wrong activity types are not for material determination in DP90. Then we reversed / cancelled the confirmations with wrong activity type. But still these confirmations are giving error of material determination in DP90. Pl. suggest how can I get rid of this material determination error in DP90 for those wrong and cancelled confirmations.
Thanks.

Hi Pete,
I tried putting actvities in the source list. It worked fine for the labour cost determination. But it is not working for material determination. I think it is putting "AND" relationship (means looking for combination of acitvity and cost element) while determination. But my requirement is to have it determined for the given cost element set without activity type combination.
Could you pl. suggest the solution for this.
Thanks

Similar Messages

WHILE expression giving Error 306, wrong number or types of args in call to

WHILE expression giving Error 306, wrong number or types of args in call to '='
declare
     block_id block;
     item_id item;
begin
     block_id := find_block(:system.cursor_block);
     item_id := find_item(:system.cursor_item);
     message('Current Block: ' || :system.cursor_block || ' Current Item: ' || :system.cursor_item);
     next_block;
     while find_block(:system.cursor_block) = block_id
     loop
          message('Current Block: ' || :system.cursor_block || ' Current Item: ' || :system.cursor_item);
          next_block;
     end loop;
exception
     when others then
     message(sqlerrm);
end;I don't see what the problem is?
Gus

other than that there are logical errors in this
u hav to use here != with the while loop.
Again loop willl never return to first block.It will stuck at last block and will show error.
For ur question u can use as
declare
     --block_id block;
     --item_id item;
     vc_first_block varchar2(65);
begin
     vc_first_block := :system.cursor_block;
     --block_id := find_block(:system.cursor_block);
     --item_id := find_item(:system.cursor_item);
     message('Current Block: ' || :system.cursor_block || ' Current Item: ' || :system.cursor_item);
     next_block;
     while :system.cursor_block != vc_first_block
     loop
Message was edited by:
jeneesh

Not able to Start Hyper-V(2012 R2) VM when placing the VM config file on Samba Share,Its giving error:Unable to initialize the saveset

---We are trying to setup Hyper-V on Samba shares samba version 3.6 exported from Ubuntu M/c. Basically runnig the Public(share) from the Ubuntu and able to access it from Windows 2012 (create/modify everything). I used Hyper-V and placed the disks
".vhd" on this , VM succesfull created and started. However when I placed the VM config files on this (samba) shares VM created successfully but its not starting, Its giving error like Unable to initialize the saveset -- Any idea how to place the
Hyper-V VM config files samba share?

Hi Rakesh KK,
Please confirm your share meet the Serve 2012r2 Hyper-V requirement, you can refer the following KB to get more detail require conditions.
Deploy Hyper-V over SMB
http://technet.microsoft.com/en-us/library/jj134187.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Content Presenter Portlet (CPP) on weblogic portal 10.3 giving error

Hi,
We are using WLP 10gR3 & UCM 10gR3 in our environment.
We've done a new installation on portal following the checklist which is working fine on a working env.
On portal application CPP giving error
Content Presenter Portlet giving err-An appropriate display template for this item could'nt be found
WLP is able to connect to UCM & all required patches for CPP (patch APD4, patch AVW6, patch ZKHC) are also poperly applied.
On console, error logs show - Error - <May 5, 2011 1:02:49 PM IST> <Warning> <Events> <BEA-401903> <Duplicate EventListener com.bea.content.repo.internal.server.logic.search.ContentExporterListener not added to Handler com.bea.p13n.events.internal.EventHandler on Type {3}.>.
Not able to understand what is going wrong?
Same set of libraries are also applied in this env.

Hi,
Could someone pls explain which cache is used to cache portlet content and in which form the content is cached?

Template form is giving error in R12

Hi All,
We are trying to run the template form from apps R12.But it is giving error as 'frm-40735: On error trigger raised unhandled exception ORA-06508'.we tried out by compiling all .pll and all invalid objects in database .All .pll is compiled by using ADADMIN.only template.fmb is not working even APPSSAND.fmb is also working fine.We are in critical possition pls any body knows please help us.
Regards,
Venkateshwari.J

Hi Srini,
I tried the below but It didnt work:
/slot/ems6596/appmgr/inst/apps/r1212112_rws60007rems/admin/scripts
-bash-3.00$ adstpall.sh apps/apps
You are running adstpall.sh version 120.10.12010000.4
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE: adstpall.sh <appsusername/appspassword>
adstpall.sh <applications_username/applications_password> -secureapps
adstpall.sh -nodbchk
adstpall.sh: exiting with status 1
-bash-3.00$ adstpall.sh
You are running adstpall.sh version 120.10.12010000.4
Enter the APPS username: apps
Enter the APPS password:
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE: adstpall.sh <appsusername/appspassword>
adstpall.sh <applications_username/applications_password> -secureapps
adstpall.sh -nodbchk
adstpall.sh: exiting with status 1
Any help into this.

Adstpall.sh and adstrtal.sh scripts is giving error in R12

Team,
I am trying to start and stop the services using adstpall.sh and adstrtal.sh but its giving error.
-bash-3.00$ sh adstpall.sh
You are running adstpall.sh version 120.10.12010000.4
Enter the APPS username: apps
Enter the APPS password:
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE: adstpall.sh <appsusername/appspassword>
adstpall.sh <applications_username/applications_password> -secureapps
adstpall.sh -nodbchk
adstpall.sh: exiting with status 1
-bash-3.00$ sh adstrtal.sh
You are running adstrtal.sh version 120.15.12010000.3
Enter the APPS username: apps
Enter the APPS password:
adstrtal.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE: adstrtal.sh <appsusername/appspassword>
adstrtal.sh <applications_username/applications_password> -secureapps
adstrtal.sh -nodbchk
adstrtal.sh: exiting with status 1
But I am able to login to DB with the same.
-bash-3.00$ sqlplus apps/apps
SQL*Plus: Release 10.1.0.5.0 - Production on Sat Mar 26 09:29:27 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select name from v$database;
NAME
R1212112
SQL> select banner from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
Autoconfig on the Apps tier and Db tier is completing successfully without any issues.
COuld you please help me in rectifying the issue.

Hi Srini,
I tried the below but It didnt work:
/slot/ems6596/appmgr/inst/apps/r1212112_rws60007rems/admin/scripts
-bash-3.00$ adstpall.sh apps/apps
You are running adstpall.sh version 120.10.12010000.4
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE: adstpall.sh <appsusername/appspassword>
adstpall.sh <applications_username/applications_password> -secureapps
adstpall.sh -nodbchk
adstpall.sh: exiting with status 1
-bash-3.00$ adstpall.sh
You are running adstpall.sh version 120.10.12010000.4
Enter the APPS username: apps
Enter the APPS password:
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE: adstpall.sh <appsusername/appspassword>
adstpall.sh <applications_username/applications_password> -secureapps
adstpall.sh -nodbchk
adstpall.sh: exiting with status 1
Any help into this.

Production Order cancellation for wrong confirmation

Hello Guru,
We have wrong confirmation on order 100000152. When user confirms one activity with two different units of measure
(in this case its MIN and KG) SAP doesn't allow to cancel the wrong confirmation we encounter error when trying to
cancel the wrong confirmation (confirmed activity must not be smaller than 0 - check entry)
Please tell us what exactly is wrong in the system that the cancellation isn't allowed. How could we don made the
cancellation for this wrong confirmation.
thanks

Hello Vivek,
Sorry yesterday, i already left out office that why i did not have to reply you about this, i personally do the production order, I do firt confirmed operation 0010 upon finished confirming this operation i confimred next the operation 0020, so that is the sequence we confirmed the order. And all the confirmation that is been done to operation 0010, we do not want to do cancelation all of this, we just made mistake when doing final confirmation on operation 0020, we have confusion on unit of measure for LIMITING WASTE, we really want ti cancel this mistake but doing CO13 for this we encounter the error, please provide us soltuion for this, we only aim to cancel the mistake we did for operation 0020 confirmation. Hope you can help us, even other guys out there.
I have also question about Patel give, (think the quantity confirmed by user for wrong operation is less than 0. Please check the quantity i.e. activity which is confirmed in MIN instead of KG. System might have converted the MIN to KG & it will be less than 0) he has some point, it maybe SAP has do convertion from MIN to KG since LIMITING WASTE in our process has unit of MIN, since we have put KG instead of the right unit, it does make convertion that cause less than 0 value, please let us know how to cancel this and made the proper resolution.
Thanks

Item Open Interface giving error for Org Assignment

We ran the MTL_SYSTEMS_ITEMS_INTERFACE & loaded all the items at master level.
We are having issues in setting at Org level. Cant figure out what the issue as only few records gets assigned & then garbage sets in for remaining records. An SR has been raised & the tech support representative was saying that UOM's are different at master & org levels. Never heard of this issue earlier. I have worked with UOM's different at Master/Org levels.
The UOM's are different at Master & Org Level and in some cases the UOM are different for different Orgs. Attribute Control for Primary/Sec UOM is at Org level. The UOM's belong to the same UOM Class. There are standard conversions defined for all these UOMs.
Any pointers for quick resolution ?

Pl do not post duplicates - Item Open Interface giving error for Org Assignment

Top N query giving error for oracle 8.0.6

Dear All,
We are executing this query SELECT XBLNR, WERKS, MATNR, MDV01, BACKFLQUANT, STATUS, SAPTIMESTAMP, PITSTIMESTAMP, PMTIMESTAMP, BATCH FROM (SELECT XBLNR, WERKS, MATNR, MDV01, BACKFLQUANT, STATUS, SAPTIMESTAMP, PITSTIMESTAMP, PMTIMESTAMP, BATCH FROM PMBPITS.PITS_UNITY WHERE STATUS = '01' ORDER BY PMTIMESTAMP) WHERE ROWNUM < 20
on oracle 8.0.6 but this is giving the following error
ora - 00907 missing right parenthesis error
1. Is it that in the inner select we cannot use order by and where clause together.
2. We also found that if we remove order by from inner select then the query is not giving error
pls help . points will be awarded

Hi,
what ever the Aman said is correct. You check this is supported in 8.1.5, SQL allows you to embed the ORDER BY clause in a subquery and place the ROWNUM condition in the top-level query;
'Top-N query' is a ORACLE 8i feature which is supported in SQL. However,
Bug:855720 states the following:
"PL/SQL does not support top-N queries (ORDER BY in SUBSELECT/SUBQUERY
or VIEW. Since this feature is available in SQL, but not in PL/SQL,
it has been logged as a Bug that will be fixed in 8.1.6."
- Pavan Kumar N

Giving error while creating a sales contact for the previous year (2008)

Hi Friends,
We are currently with SP12. When we try to create a sales contract for the previous year it is giving error like "Schedule line is for the item 100 cannot be after the order's latest delivery date".
i tried debugging and found that that there is a rule created for this (in SP12). I commented the rule and tried to create a contract but, again got an error "Error while saving". This error I can't catch while debugging.
I even didn't find where the schedule line date and header cancel dates are set so that I can change the dates manually.
If any one has any idea, kindly help me.
Best regards,
Swarna Seeta

Hi Wolfhard,
Thanks for the reply.
You are right and I have uncommented the line which assigns true to the return value and the contract got saved now.
Thank you so much.
I just want to know whether commeting this rule effects any of the functionalities of the sales contract.
Best regards,
Swarna Seeta

FM SSF_CLOSE failing and giving error message while printing a smartform

Hi,
for language spanish the smartform is not getting printed for output type SG11 but for english it is getting printed? What could be the reason? I debugged and found that SSF_CLOSE is failing and giving error message.
Thanks and regards,
AP.

Hi Aparajita,
for changing from one languages to another translations in SE63 is to be done, either search on SCN for using SE63 , or atleast see these wiki help .
Transaction SE63 - Translation Tools for Translators (BC-DOC-TTL) - SAP Library
Transaction SE63 (SAP Library - Translation Tools for Translators (BC-DOC-TTL))

Task Manager Not loading Properly. Giving Error No more threads can be created in the System.NAPStatus UI and Some other Task related Errors

I have a problem with the Task Scheduler. It is not opening properly it is giving Error Message box at this time i am unable to post. The Tasks Scheduler is starts with a error alert "No more threads can be created in the System.NAPStatus UI".
I am unable to view the history of the tasks schecduled.It is giving message as
"The user account does not have permission to Access the Task History."
How to fix it. It is frustrating as can't able to track my Tasks and Create new Tasks. Any Suggestions helpful.
Thanks in Advance.
RehaanKhan. M

Hi,
Thanks for your post.
Please check event viewer if there are some error logs?
Meanwhile, there is a similar thread has been discussed:
Receiving error about "no more threads"
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9a9e22e4-d947-4d19-b06c-aaadda624dbc/receiving-error-about-no-more-threads?forum=winservergen
Regards.
Vivian Wang

WebdynproJava Components giving error while migrating from NWDS SP03 toSP09

Hi,
The original DC's were developed in lower NWDS patch level, currently i have upgraded the patch level of NWDS to 09 and importing the Wed Dynpro components from NWDI; but some of the DC's are proper but some are giving error.
I tried Project build, DC build and Repairing the DC's but nothing worked.

Hi Siarhei,
Error:
The constructor WSTypedModel(String, String, QName, String, Map, String, IWSTypedModelInfo, Map<String,QName>) is undefined
Warnings:
Versions of 'com.sap.dictionary.runtime' are different.
Versions of 'com.sap.dictionary.services' are different.
Versions of 'com.sap.tc_.wd_.rtgen' are different.
Forgot to mention i am working on CE7.1
Regards
Jagan

Giving Error while generating the Data mart to Infocube.

Hi Gurus,
I need to extract the APO infocube data in to the BW infocube. For that iam trying to generate the data mart to APO infocube .
So, that i can use that data mart as a data source to extract that APO Infocube data in to BW infocube.
In that process iam trying to generate the datamart for APO Infocube . But while generating it is giving errors like below:
Creation of InfoSource 8ZEXTFCST for target system BW 1.2 failed
The InfoCube cannot be used as a data mart for a BW 1.2 target system.
Failed to create InfoSource &v1& for target system BW 1.2.
PLease suggest me what to do for this Error problem.
Thanks alot in Advance.

Hi,
Point No : 1
What is Planning Area :
http://help.sap.com/saphelp_scm41/helpdata/en/70/1b7539d6d1c93be10000000a114084/content.htm
Point No : 2
Creation Steps for Planning Area :
http://www.sap-img.com/apo/creation-of-planning-area-in-apo.htm
Note : We will not create Planning Area.This will be done by APO team.
Point No 3 : Afetr opening the T-Code : /n/SAPAPO/MSDP_ADMIN in APO you will be able to see all the planning areas.
Point No 4 : Select your planning area and Goto Extras menu and Click on Generate DS
Point No 5. System automaticall generate the DS in APO (Naming Convention start with 9) and Replicate the DS in BI Map to your cube and load the data.
Regards
Ram.

Giving error message when saving the Query

Hello,
I have added a new calculated key figure to the structure in a Query but when I try to save the Query it is giving error message is below.
Error Message:
u201CThis internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572u201D.
Could any one please suggest me how can I over come with this problem.
Thanks
Prathap.

Hi Prathap,
There is some problem in the definition of the Query.
Please click on the check button before saving the query, it gives where the problem exists in it.
Hope it helps.
Veeerendra.

Wrong Confirmations giving error in DP90

Similar Messages

Maybe you are looking for