Wrong contact image is displayed in mail

When I send an email my wife's contact photo is displayed in the sent and inbox folders. My MacPro is configured as a single user where I am the administrator. My wife has a laptop where she is configured as the administrator and sole user but she doesn't have this problem. Her contact photo displays correctly.
I suspect this has something to do with converting to iCloud where the address book is distributed between my wifes macbook pro, an iphone and an ipad2, but I'm not sure. My attempt at solving this problem consisted of dragging different contact photos (two of them are my wife's picture) into the image box and now I have 12 different photos but no way to clear them (Clear Custom Image is grayed out because I am the administrator I guess). I would like to clear out all contact photos in my address book for me (administrator) and start over with one photo and maybe mail will stop displaying my wife's picture. Any ideas to help me out will be appreciated?

In the switch to iCloud (my wife and I run idential MacBooks) Lion 10.7.2 I've noticed that my prefered log-in photo for my account keeps reverting back to a green leaf image. I, too, believe that this has something to do with iCloud and syncing between our two computers. Unfortunately I've not found a way to overcome this small glitch. I've changed the green leaf back to my photo several times and locked the padlock to prevent changes but the green leaf keeps coming back ack aack!

Similar Messages

Where keeps N8 a contact image cache ?

I have one or two contacts that does not display the associated contact image either in incoming call, or when calling via quick dial. However, the contact image is displayed ok when calling normally via Contacts. The image is also ok in Nokia Suite and Windows Contacts (as all these are in sync).
The image is usually very small, 95x95. I changed the image, I tried with both .png and .jpg. I completely deleted the contact from phone and recreated from scratch, no difference. Any contact, new or existing, that happens to have a certain phone number, will not show the contact image in incoming call or quick dial. If I change the number (changing one digit) and call this modified one via quick dial, then the image shows ok.
I suspect that at one point in time there were some duplicates, or something like that, so that in the past the phone was not sure whom image to display. This is no longer the case, but it seems to me that the conflict remained somewhere in some cache.
Any idea where this cache might be ?
Cristi

I noticed that when I connect the phone as a mass storage device all things that access the e: & f: are denied by the phone until it is disconnected. That said, all the contact images are still present. Which means they are on the c: drive. I am curious how much space reach image takes up? Because I an running low on space with only about 60 megs free.
White 808 Pureview NAM
Black N8 NAM
Silver N95-3 NAM

HT2486 My address book only displays e-mails. How can I sync it with my i-phone to display the address book the same way as my contacts in my i-phone?

Currently my address book only displays e-mail addresses. It uses the portion of the address in front of the @ as the name. How can I sync it with my i-phone 4S that has name/numbers and addresses of my contacts?

Hello there, Seta.
You are correct that this can be done with iCloud. The following Knowledge Base article provides some great instruction for syncing contacts:
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/ht1296
Particularly:
Contacts, Calendars, Bookmarks, and Notes
You can sync contacts, calendars, bookmarks, and notes with other applications on your computer. This allows you to keep all your information in sync across multiple computers and iOS devices. The settings for these items are all in the Info tab for your iOS device in iTunes. With your iOS device connected to the computer, select your iOS device. Then click the Info tab.
For details on syncing content on your iOS device with your computer, click the sections below.
Contacts
To sync contacts with your computer, choose "Sync Contacts with" within iTunes for Windows, or "Sync Contacts" in OS X v10.8, or "Sync Address Book Contacts" in OS X v10.7 and earlier.
You can sync your contacts with:
Microsoft Outlook 2003, Microsoft Outlook 2007, Microsoft Outlook 2010 (Windows XP, Windows Vista, Windows 7, and Windows 8)
Windows Address Book (Windows XP)
Windows Contacts (Windows Vista, Windows 7, and Windows 8)
Address Book (Mac OS X v10.7 and earlier)
Contacts (Mac OS X v10.8)
Microsoft Entourage 2004, Microsoft Entourage 2008, or Microsoft Outlook 2011 for Mac
Notes:
When syncing contacts, you can choose to sync all of your contacts or only selected groups. The option to sync selected items may not show up until after the first sync.
You can select a group of contacts to which all new contacts created on your iOS device will be added.
Additional options for syncing include syncing your contacts with Yahoo or Gmail/Google Mail. You will need to configure it with the user name and password for your Yahoo or Google account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Images are displayed wrong in firefox

Hello!
I am a photographer, uploading images in png to my gallery at deviantart.com. I noticed that the images are displayed wrongly in firefox - but in IE9 and Opera they are shown correctly. I have tried with different color management settings in about:config but none of that has solved the problem. I would like to know why it is that firefox can't show the colours correctly, like opera and IE?
If it's impossible to fix I will just simply have to stop using firefox which would be a shame when I have been using the browser for many years. The problem has not existed earlier.
Best regards

http://kasperarts.deviantart.com/gallery/#/d2to4iq
That image for instance. And I save them using Adobe RGB since thtat's the colour space I work in, but this has never been a problem before.

After updating to OS X 10.8.3, remote images fail to be displayed in Mail

After updating to OS X 10.8.3, images fail to be displayed in Mail regardless of setting in "Display remote images in HTML messages".
Any clue ?

I'm also having this problem. Help?

SOST tcode display wrong contact name in recipient.

Hi All,
Our issue is with workflow sending the emails for the supplier and requestor to the wrong contact name, but correct email address. In SOST tcode recipient names are wrongly displayed. Is problem with workflow or SOST?.
Kindly advice.
Thanks,
S K.

Hi Sravan,
I guess this is an incorrect approach to maintain same email ID for multiple users. Please check if this is your business requirement else correct the same.
The user names are picked from the details maintained in SU01 and also possible if this user is assigned to a Busienss Partner, then the details are picked from t-code BP.
Please try and correct the entries for few test users. Maintain the email ID to only one user and then test if you still face the issue.
Regards,
Saumya

Wrong display of mail in Outlook ; Urgent pls

Dear All,
I am getting error while sending mail from jsp. I want to send html content to mail in jsp, on my local host its working correctly, but after uploading it on ISP server the content which i sent is not a html, but its dispalying plain text with html codes. i.e its giving html code instead of html page in mail. Please help me, its urgent
My code is as follows
// this is the html data which should be displayed in mail, its the dynamic data
String data="<body bgcolor='FFFFFF' leftmargin='0' topmargin='0' marginwidth='0' marginheight='0'>
<table width='100%' border='0' cellspacing='0' cellpadding='5'><tr><td bgcolor='#FFFFFF'>
<table width='100%'><tr><td colspan='2'><table width='100%' border='0' cellspacing='0' cellpadding='0'>
<tr><td bgcolor='#920003'><font color='#FFFF33' size='+3'><strong>Churchill</strong></font>
<font color='#FFFFFF' size='+1'>Independent Estate Agents</font></td></tr><tr><td><hr size='1'>
</td></tr></table><p style='font-family:Verdana,Arial,sans-serif;font-size:11px;'>
You were sent this email because <a href='mailto:"+YEmailID+"'>"+YEmailID+"</a>
requested you receive a copy.</p><table width='100%' cellspacing='0'
cellpadding='0' style='background-color:#EEEEEE;font-family:Verdana,Arial,sans-serif;font-size:11px;'>
<tr><td style='padding-left:5px;padding-top:10px;padding-bottom:10px;background-color:#CCCCCC;'>
"+YEmailID +" also sent you this message:</td></tr><tr><td
style='padding-left:5px;padding-top:15px;padding-bottom:15px;font-size:10px;'>
'"+Msg+"'</td></tr></table><br></td></tr><tr><td width='97%'><font size='2'
face='Verdana, Arial, Helvetica, sans-serif'></strong></font></td></tr><tr>
<td width='39%' bgcolor='#920003'><font color='#FFFFFF' size='2' face='Verdana,
Arial, Helvetica, sans-serif'>"+subdata+"</font></td></tr><tr><td><table width='100%'
border='0' cellspacing='0' cellpadding='0'><tr><td width='66%'><div align='center'><a
href='"+url+"/searchfulldetails.jsp?proid="+str[1]+"&dealtype="+str[18]+"' target='_blank'>
<img src='"+url+str[10]+"' width='350' height='247' border='0'></a></div></td></tr></table>
</td></tr><tr><td> </td></tr><tr><td><p><font size='2' face='Verdana, Arial,
Helvetica, sans-serif'><strong>Full details</strong></font></p><p><font size='2'
face='Verdana, Arial, Helvetica, sans-serif'>"+str[8]+"</font></p><p><font size='2'
face='Verdana, Arial, Helvetica, sans-serif'>To know more about this property
from us, please <a href='"+url+"/searchfulldetails.jsp?proid="+
str[1]+"&dealtype="+str[18]+"' target='_blank'>
click here</a></font></p><p><font size='2' face='Verdana, Arial, Helvetica, sans-serif'>
<Strong>Call : "+str[9]+"</Strong></font></p></td></tr></table></body>";
String mailServer = "xxx.xxx.xxx.xxx"; // here im giving my mail server name
if(FEmailID.equals("") )
       FEmailID = "unknown";
    Properties props = new Properties();
    props.put("mail.smtp.host", mailServer);
    Session s = Session.getInstance(props,null);
    MimeMessage message = new MimeMessage(s);
    InternetAddress from = new InternetAddress(YEmailID);
    message.setFrom(from);
    InternetAddress to = new InternetAddress(FEmailID);
     message.setContent("html","text/html");
     message.addHeaderLine("Content-Type: text/html; charset=\"iso-8859-1\"");
     message.addHeaderLine("Content-Transfer-Encoding: quoted-printable");
     System.out.println("Mohsin Syed, just for testing line number 73");
    message.addRecipient(Message.RecipientType.TO, to);
    message.setSubject("Churchills Property: "+str[7]);
    message.setText(messageEnter);
     message.setText(data);
    Transport.send(message);the resultant mail in Outlook is as follows , ie it gives this text in outlook
Harlesden
Mime-Version: 1.0
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<body bgcolor=3D'FFFFFF' leftmargin=3D'0' topmargin=3D'0' marginwidth=3D'0'= marginheight=3D'0'>
<table width=3D'100%' border=3D'0' cellspacing=3D'0' ce= llpadding=3D'5'><tr><td bgcolor=3D'#FFFFFF'><table width=3D'100%'>
<tr><td c= olspan=3D'2'><table width=3D'100%' border=3D'0' cellspacing=3D'0' cellpaddi= ng=3D
'0'><tr><td bgcolor=3D'#920003'><font color=3D'#FFFF33' size=3D'+3'><s=
trong>Churchill</strong></font> <font
trong>color=3D=
'#FFFFFF' size=3D'+1'>Independent Estate Agents</font></td></tr><=
tr><td><hr size=3D'1'></td></tr></table><p
tr>style=3D'font-family:Verdana,Ari=
al,sans-serif;font-size:11px;'>You were sent this email because <a hre=
f=3D'mailto:[email protected]'>[email protected]</a> request=
ed you receive a copy.</p><table width=3D'100%' cellspacing=3D'0' cellpaddi=
ng=3D'0' style=3D'background-color:#EEEEEE;font-family:Verdana,Arial,sans-s=
erif;font-size:11px;'><tr><td style=3D'padding-left:5px;padding-top:10px;pa=
dding-bottom:10px;background-color:#CCCCCC;'>[email protected] al=
so sent you this message:</td></tr><tr><td style=3D'padding-left:
5px;paddin= g-top:15px;padding-bottom:15px;font-size:10px;'>'testing1200'</td></tr></ta=
ble><br></td></tr><tr><td width=3D'97%'><font size=3D'2'
ble>face=3D'Verdana, A=
rial, Helvetica, sans-serif'></strong></font></td></tr><tr><td width=3D'39%=
' bgcolor=3D'#920003'><font color=3D'#FFFFFF' size=3D'2' face=3D'Verdana, A=
rial, Helvetica, sans-serif'><strong> � 298500</strong></fo=
nt></td></tr><tr><td><table width=3D'100%' border=3D'0'
nt>cellspacing=3D'0' c=
ellpadding=3D'0'><tr><td width=3D'66%'><div align=3D'center'>
<a href=3D'htt= p://localhost:9999/Churhcill//searchfulldetails.jsp?proid=3D125&dealtype=
=3DSale' target=3D'_blank'><img src=3D'http://localhost:9999/Churhcill/im=
ages/property/S125.JPG' width=3D'350' height=3D'247' border=3D'0'></a></div=
</td></tr></table></td></tr><tr><td> </td></tr><tr><td><p><font
size==3D'2' face=3D'Verdana, Arial, Helvetica, sans-serif'><strong>Full details<=
/strong></font></p><p><font size=3D'2' face=3D'Verdana, Arial, Helvetica, s= ans-serif'>
This three bedroom terraced property has recently been refurbish= ed by its
present owners. Situated on this residential road with shopping f= acilities
which can be found along Craven Park and varied transport links i= ncluding
Harlesden Station (Jubilee Line). </font></p><p><font size=3D'2' f= ace=3D'
Verdana, Arial, Helvetica, sans-serif'>To know more about this prope= rty
from Churchill, please <a href=3D'http://localhost:9999/Churhcill//se=
archfulldetails.jsp?proid=3D125&dealtype=3DSale' target=3D'_blank'>
click he= re</a></font></p><p><font size=3D'2' face=3D'Verdana, Arial, Helvetica, san= s-serif'>
<Strong>Call : 020 89652250</Strong></font></p></td></tr></table><=
/body>

The MimeMessage's setText api states
"Convenience method that sets the given String as this part's content, with a MIME type of "text/plain".
I think you should not use setText if your content type is not "text/plain", rather try using MimeMessage's setContent(body, "text/html") api
where body is a String that has your html message body.

Incoming Text Messages Allocated to Wrong Contact

I recently recieved my Zed10 back from warranty repair for an out of the box malfunctioning headphone port and am now experiencing an issues a thousand times more frustrating. The phone is now having issues when I recieved a text message in which it will assign it to the wrong contact. I've checked the contact information, there's no duplicated numbers, the number the text is coming from is only assigned to one contact, yet thru one SMS conversation, it may appear that I am talking with 3 different individuals, which is very confusing. Before I sent my Zed10 in I did a full backup, then security wipe. I received my exact same device back from warranty, updated to the latest OS, did a restore of my backup, and now this. I went thru and deleted all the SMS history, which seemed to resolve the problem, but after about an hour it has started again. Some of the numbers it is now showing as incoming texts are not even numbers of my contacts, yet I can keep the conversation going by replying to the actual contact on my phone (if I reply to the number that it's telling me the text came from, the person on the other end has no information of any text). Has anyone experienced this? Since we don't really have contact backup options in Link like we did in DM my next "fix" attempt will be to move my contacts to my SIM card and wipe the device... again. Very glad to have my BB10 back after 2 weeks on a Curve 9300, but this is VERY frustrating.
If anyone has had anything like this happen, please help. Thanks everyone.
Solved!
Go to Solution.

Please read this:
SMS messages appear to come from the wrong contact when received on the BlackBerry 10 smartphone
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Can't send iMessages to contacts containing both an e-mail and a phone number. The phone wants to send SMS by default (iMessage is turned on)

iPhone 3GS
model: MC637C
iOS version: 5.1 (9B176)
This issue started with the last iOS update and has affected not only my phone, but my wife's and father in law's as well (we all have the exact same model)
When I attempt to send a text message to my wife, my phone suddenly won't send imessages anymore. Only text. I have tried rebooting my phone, and my wife's phone. We have even tried wiping our phones and restoring them from backups. The problem still persists, wether we are at home connected to wifi or out of the house on 3G.
The only way I have managed to send my wife an imessage was by creating a new contact with ONLY her e-mail address. That only worked once. since then, its trying to send everything as SMS again.
This is unacceptable as we live in an area with very poor celular coverage and rely heavily on wifi connections, therefore we won't receive an SMS until our phones get access to the celular network. All other apps and phone functions are working correctly across all 3 phones mentioned.
On both my phone, and my wife's, I have double checked to ensure that iMessage is still turned on. I suspect that this is a global software issue seeing as it only started once we updated our phones to the latest iOS. My question is this:
Are we doing something wrong?
Prior to the update, we were all able to send iMessages to eachother, regardless of where we were. The only time we'd have an issue is if someone's phone was turned off or not connected to either the celular 3G network or a wifi with internet access (which is natural).

You may want to turn iMessage off, wait a few minutes, then turn it back on on each of these phones (to re-register the phone numbers with the iMessage server). Also confirm that you have the correct date, time and time zone on each of the phones (in case a recent change to DST resulted in incorrect setttings on your phones). There are more troubleshooting steps here: http://support.apple.com/kb/TS2755.

JPG images not displayed correctly in Bridge and Photoshop (Mac OS)

(Note: I have copied the content of this query from the Creative Suites forum where I originally opened it.)
I am using CS4 under OSX 10.4.11 on a PowerMac G5 Quad with 23" Apple cinema display. Images which have been captured as JPG are displayed fine by Preview, but when opened in Bridge, Camera Raw or Photoshop. the colours are all "washed out". The attached screen capture should give an idea of the difference, with the upper being Camera Raw (image settings) and the lower being Preview. My monitor has been calibrated and I'm using sRGB IEC61966-2.1 colour space in Camera Raw and Photoshop. The colours displayed by Preview are pretty close to "real life". I find it virtually impossible to adjust the colours in Photoshop to get back to anything similar.
After opening the image in Photoshop without adjustment, and Save As JPEG with embedded color profile, Preview displays the new image the same as Photoshop. Save As JPEG without embedded color profile, and Preview displays this copy just like the original. It seems that Photoshop is making different (incorrect) assumptions about what color space to use when there is no embedded color profile. Shouldn't it assume sRGB like virtually everything else (http://en.wikipedia.org/wiki/SRGB)? Or is its interpretation of sRGB incorrect? How can I fix this?
Re: JPG images not displayed correctly in Bridge and Photoshop

xxxxyyyyz wrote:
…If there is someone out there who has experience of obtaining decent colour management in CS4 on a Power PC, I would really like to know how you achieved it.
That would be yours truly, and I hasten to reply because I may have some insights that can help you too.
Just get it it out of the way, here's my setup:
Photoshop 11.0.2 ("CS4"); VersionCue disabled and uninstalled.—2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; 1 FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
I can unambiguously and in good faith represent to you that my color management, from capture to print, is as spot-on as anyone with any kind of setup can hope to achieve. Unequivocally and without qualifications.
Now, first things first: Forget about trying to synchronize color management across the point applications lumped together only by Adobe marketing fiat into a variety of meaningless "creative suites". Concentrate on Photoshop. Do not try to use Bridge to synchronize anything.
The "suites" are a totally artificial construct created by Adobe bean counters and marketing types. The point applications (i.e. the individual programs clumsily bundled together, e.g. Photoshop, Illustrator, InDesign, etc.) are developed independently by separate engineering teams that are not only not in the same building, but in different cities, different states of the American Union, and even in different countries. They have very little communication among them, if any, as evidenced by repeated posts in these forums by Photoshop engineering staff urging us, the end users, to let the other teams know in their own forums that a given problem exists and is actually affecting our work.
Enough said about the cause of the problem. The end result is that Color Management is at very, very different levels of progress and sophistication in each individual point application, with only Photoshop fully entitled to be considered state of the art.
Secondly, a disclaimer: I have been hanging on to my CRT monitors and take care of them as Jascha Heifetz used to take care of his Stradivarius. I don't know what I will do if I manage to outlive the usefulness and accuracy of my CRTs (unlikely at this point). I have despaired in futile efforts to bring the luminosity of any LCD monitor down to where I would feel comfortable calibrating and profiling it. I believe my monitors are the foundation of my color management efforts.
Especially if you have one of the extreme wide-gamut LCD or LED monitors, you'll face an uphill battle.
Be careful to avoid any version 4 icc profiles, whether canned or generated by your calibration software. Stick to version2 icc profiles. Ask the manufacturer of your calibration software/hardware if in doubt.
Here are some not-too-recent, but thoroughly representative screen shots of the calibration results I obtain with my monitors, which I calibrate and profile often and regularly (I validate the calibration at least several times per month).
In a nutshell, my color management practices and settings mirror those described by Bruce Fraser, Jeff Schewe, Andrew Rodney and Gary Ballard's site. I have learned from all of them.
My working color space is ProPhoto RGB. I choose to work with PSD and PSB files. As a long-time, rabid JPEG hater, I only rarely deal with JPEGs, using them sporadically to illustrate a point in this forum or elsewhere in the web. My main output consists of prints.
I only deal with tagged image files (files with an embedded color profile) and often recommend beating up with a baseball bat any moron that hands you an untagged file—figuratively of course, but I find the expression gets my point across unambiguously.
Following is a screen shot of some of my pertinent settings:
Note that I have never bought into the "suite" concept myself. I do have and routinely use Adobe Illustrator 10.x, InDesign 2.x and Acrobat Professional 8.x, but they are all older, independent versions of each point application, licensed at different times.
Be further advised, that the answer to many problems offered by Adobe engineers often is not to install VersionCue, or uninstall it, or at least disable it.
Also, as outlined at the beginning of this post, concentrate on Photoshop, not on synchronizing applications that can't really communicate with each other, despite the claims of Adobe marketing hacks to the contrary.
One big caveat, do not fall into this trap:
xxxxyyyyz wrote:
…I believe my problem has nothing to do with my monitor profile, for several reasons, but…
…It seems extremely unlikely to me that…
You either want to learn, or you don't. You either want to solve your problems, or you don't.
When you start arguing instead of studying, questioning advice instead of following it and detecting where you went wrong, you're on the right track to nowhere. That attitude will get you there fast. Remember you are the one with the problem, and only you can acquire the discipline to learn how to solve it.
Go ahead and ask me anything that is not clear, just don't argue with me please, and don't tell me why you think Fraser, Rodney, Ballard and I are wrong. You see, I am not experiencing any problem that needs fixing. I have an interest in helping you, but not in hearing about your speculations, theories or conclusions.
Good luck.
Wo Tai Lao Le
我太老了

How do i get an image to display????

this is some code that i have developed to try to get an image to display. i realize that the arrays for images and sources aren't needed but i want to provide room for when i animate things. but i need to get them to display first. what am i doing wrong?
import java.awt.*;
import javax.swing.*;
public class animate extends JFrame implements Runnable {
Thread runner;
int current;
Image img[] = new Image[1];
String[] source = {"thing.gif"};
     public animate() {
          super("animate");
          setSize(210,210);
          setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          JPanel pane = new JPanel();
          pane.setBackground(Color.white);
          show();
          Toolkit kit = Toolkit.getDefaultToolkit();
          for(int i = 0; i < img.length; i++) {
               img[i] = kit.getImage(source);
     if(runner == null) {
          runner = new Thread(this);
          runner.start();
     public void run() {
          while(true) {
          current = 1;
     public static void main(String Args[]) {
          new animate();
     public void paintComponent(Graphics comp) {
          Graphics2D com = (Graphics2D)comp;
          if(img[current] != null)
               com.drawImage(img[current],0,0,this);
com.drawString("hello",0,0);

Is that the exact code you're trying to run?
It won't work for several reasons but I'll limit my response to just answering your question. Don't use paintComponent, use paint.
public paint( Graphics g )

CF slows down to a halt ... images not displaying

My primary laptop on which I do all coding ...
- less than 1 year old
- Dell (cough) XPS M1730
- Windows XP (latest)
- ColdFusion Ver 8, developer edition.
- No other issues with laptop
Also running
- SQL 2000
- Synergy
- Anti virus etc. changed Norton daily scan and unaware that I have picked up any viruses - I was my hands very well and often
Over 6 months gradually CF has been slowly not display internal referenced <img src> tags. External work fine.
To the point now where most in our app do not display.
Then in the past 3-4 days a lot of pages when called give Firefox or IE errors:
Page will not display with too may users error.
But there aren't any others.
I go to all other web site, no issues with speed.
I just cold warm booted the machine and now while page 1 appears, page 2, login, takes minutes to appear. But on a beta server (also developer edition) it's instant.
When I go straight into the browser, it works fine, albeit no images, crashes with a known bug (missing application variable), fix it, then resume, then just sits there forever.
And there's no difference between the two machines ... well, not in "that" way.
Adding to my confusion is ... I cannot get into the CF Admin panel.
I can see it approve me, then it just spins.
Nothing has changed on machine in past weeks EXCEPT traveling when I sign in to the usual plethora of wifi and other networks but never had a problem - except luggability
I am thinking of, UGH, reinstalling Windows ... but why bother if it's working perfectly and only ColdFusion has an issue.
Now COLD booted machine for 5 minutes.
Everything seems better except CF still a BIT sluggish and still not "drawing" most images. Able to access Admin panel. Even if there images not displaying.
Anyone any ideas?

Thanks for your prompt reply ...
We scoured for a folder like that and found none.
What we DID find is that over the years of coding, we have a template count of 3,500 files in 130 folders, but the root where we start is about 1,500 files. 144 megs total size though.
That shouldn't be too much? Esp as our beta and production servers are using the same amount with no issues.
Admittedly production is CF 7.X.
Much more powerful machines but still.
It would have made sense as that is the only thing on the machine that has "grown" ... but no luck.
Does remind me of the day when our mail server got hacked and we had 100,000 outbound in the spool. That was fun.: :)

Image not displayed programmtically stored in blob column

Hi,
I altered student table to store photoes of students. For this I added STIMG as blob, MIMETYPE,FILENAME,IMAGE_LAST_UPDATE COLUMNS to studentadmitted table. Image stored and displayed in report very nicely. With the following query
select "ROWID",
"ST_ID",
"FIRST_NAME",
"LAST_NAME",
"FFIRST_NAME",
"FLAST_NAME",
"COURSE_ID",
"SESSION_ID",
"CONTACT#" "CONTACT_H",nvl(dbms_lob.getlength(STIMG),0) IMAGE
from "#OWNER#"."STUDENTADMITTED"
Images are displayed in column but they have different sizes.
To control this I modified the query like this
select "ROWID",
"ST_ID",
"FIRST_NAME",
"LAST_NAME",
"FFIRST_NAME",
"FLAST_NAME",
"COURSE_ID",
"SESSION_ID",
"CONTACT#" "CONTACT_H",decode(nvl(dbms_lob.getlength(stimg),0),0,null,
'<img style="border: 4px solid #CCC; -moz-border-radius: 4px; -webkit-border-radius: 4px;" '||
'src="'||
apex_util.get_blob_file_src('P16_stIMG',st_id)||
'" height="75" width="75" alt="Product Image" title="Product Image" />')
detail_img
from "#OWNER#"."STUDENTADMITTED"
Report did'nt run with following error,
report error:ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Win Server 2008
Oracle Database :11G R2
Apex Ver :4.2
Sajjad

Sajjad wrote:
I altered student table to store photoes of students. For this I added STIMG as blob, MIMETYPE,FILENAME,IMAGE_LAST_UPDATE COLUMNS to studentadmitted table. Image stored and displayed in report very nicely. With the following query
select "ROWID",
"ST_ID",
"FIRST_NAME",
"LAST_NAME",
"FFIRST_NAME",
"FLAST_NAME",
"COURSE_ID",
"SESSION_ID",
"CONTACT#" "CONTACT_H",nvl(dbms_lob.getlength(STIMG),0) IMAGE
from "#OWNER#"."STUDENTADMITTED"
Images are displayed in column but they have different sizes.Stick to declarative BLOB images as above. They can be resized in reports using CSS. Add a style sheet in the page Inline CSS property:
td[headers="IMAGE"] img {
display: block;
width: 75px;
border: 1px solid #999;
padding: 6px;
background: #f6f6f6;
}where the <tt>IMAGE</tt> value in the attribute selector is the table header ID of the image column. Setting only one dimension (in this case the width) scales the image with the correct aspect ratio. (The border, padding and background properties are just eye candy...)
However, if the original images are large then scaling them in the browser this way is a huge waste of bandwidth and produces poorer quality images than creating proper scaled down versions using image tools. Downloading megapixel images and then reducing them to thumbnail size results in pointlessly pushing millions of bytes that will never be seen.
For improved performance and image quality, and where you require image-specific scaling the best approach is to use the database ORDImage object to produce thumbnail and preview versions automatically. Note that this is not possible in Oracle XE as Multimedia is not included

My mom typed in the wrong email addy and now her mail is locked. It states that there is mail in her outbox but won't let me get to it. any suggestions? Thanks

My Mom typed in the wrong email address and now her mail is locked. It states that it can't be sent because the server rejected one of the recipient's addresses. The message has been placed in your Outbox. Now when I go to the outbox I can not access it. It is like it's locked. She has and IPad version 1. Any help would be appreciated.

This may be of help.
http://apple-ipad-tablet-help.blogspot.com/2011/08/ipad-2-email-address-rejected -by-server.html
If you can't use the mail app now - if it is frozen - quit the app and restart the iPad.
Go to the home screen first by tapping the home button. Quit/close mail by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down onthe mail app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesnt help try resetting the iPad. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Cannot load images anymore in incoming mail in V29

I cannot get images to load in incoming mail since installing V29, nor do I get the option to allow it to do so above the email

I'm having the same problem. No embedded images display (attached images do display) and no notice above the email to allow images either temporarily or permanently. V 24.5

Wrong contact image is displayed in mail

Similar Messages

Maybe you are looking for