Wrong credentials entered during Client update

Hi,
We have a production site where ODS transfer have stopped working after an upgrade
from 6.0.4.12 to 6.0.4.18.
I am suspecting that the wrong database credentials have been given during client upgrade and
I want to change them to make sure they are correct. Since this is now encrypted information
I have no file that I can update.
How can I change the created database credentials after an update to the client is done?
Best regards,
Johan

Hi Johan,
Please check SAP Note 1959267.
Regards,
Sergiy

Similar Messages

HT4623 During my update to ios6.1. I was ask for a optional email add, if I entered wrongly, where am I able to reset it?

During my update to ios6.1, I was ask for an optional email after a 3 security questions. However I have entered an invalid email, where can I change that?

I am having the same problem. I think I saw something about VPN and not being able to communicate with Apple web site. Do you have your protected company email on your phone?

HT4623 During my update to the new operating system I am unable to get past Rescue EMail. I tried not putting in another e-mail as it says it is optional - that did nto work. I entered a Rescue E-Mail and it will not allow me to go to the next step. Help

During my update to the new operationg system I am unable to get past the Restore E-Mail. I first chose not to have an "optional" restore e-mail and was unable to get past this section. I then entered an alternate e-mail with the same results. I am unable to get past this section after I push the Next symbol. HELP!

I am having the same problem. I think I saw something about VPN and not being able to communicate with Apple web site. Do you have your protected company email on your phone?

AirPort Client Update 2009-002 Connection Lost

I just installed the AirPort Client Update 2009-002 and now when my computer goes to sleep it loses the internet connection. It reconnects when it awakes from sleep but I need the connection to stay alive even when the computer is in sleep mode.
Was something wrong before or is something wrong now? How can I get the old functionality back? I've looked for an option but can't find anything. Thanks for your help!

I think I'm having the exact same problem, so I'm posting here instead of starting a new topic.
Before a few days ago I was only using a PB G4 with 10.4.11 and an Airport Extreme 801.11n and didn't have any troubles with this set up. I could close the Powerbook, open it up later and almost immediately have access to my wifi. Or, I could leave it open and it would maintain a connection even when no activity (by me, physically) was going on.
I recently got a new MBP (and thus 10.6, which I updated to 10.6.2). If I close the MBP, putting it to sleep, and then open it, I can not access my network. I get the connection timeout message you mentioned. But here's the thing, I also can't get online with my older Powerbook.
I also also tried this: having both side by side and working. I close the MBP, leaving the PB open. I wait a few minutes and try reloading a page on the PB and it says I'm not connected and it refuses to connect.
The only solution I've found so far seems to be to pull the power plug out of the base station, plug it in, and wait a minute or two. I'm then able to access my wifi again.
Did the software update somehow mess with my base station? It's running version 7.3.2.
Do I need to trash some setting? Do I need to tweak some network setting in 10.6 that I don't know about?
I wish I knew if I was having the problems in the few hours between using 10.6 out of the box and updating to 10.6.2 (and a few other things), but I don't think I ever put it to sleep during that time.

ARD 3.2.2 client update: new lab problems

I've been using ARD for years to manage my Mac labs. Sometimes it worked well, sometimes it didn't. I even beta tested it once so I am aware it's not Apple's most glorious piece of software.
My latest problems began after updating the clients to 3.2.2 (using ARD, of course). (Clients are running both 10.5.4 and 10.5.5.) I can see the clients in the Scanner list (without the ARD version listed for some reason), activate them in the list (after some difficulty), observe and control them -- but I CANNOT perform the other tasks listed under the Manage menu (copy items, empty trash, restart, etc.). If I attempt to do so, I am told they are Offline (when they obviously are not, since I can observe/control them) and that the task is not supported.
Reinstalling the 3.2.2 client updater manually at a workstation does not fix the problem, nor does repairing permissions. Client settings under the Sharing System Prefs panel are the same as they ever were (ie, I am allowed to do the things I am attempting to do).
I have tried this with ARD admin 3.2.2 from an Intel iMac set up as a Leopard Server, as well as from a station in the lab itself. Same problems.
Other more advanced tricks have been discussed in other threads here, but I have never had to go to those lengths to get ARD to work. IMO the 3.2.2 updater messed something up.
FWIW, here is the results of my permissions repair on a station where I used ARD to update the client:
Repairing permissions for “COMMLAB 18”
Reading permissions database.
Reading the permissions database can take several minutes.
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
Permissions differ on "Library/Application Support/Apple/ParentalControls/ALRHelperJobs", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "System/Library/LaunchDaemons/com.apple.usbmuxd.plist", should be -rw-r--r-- , they are -rwxr-xr-x .
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Home/lib/jvm.cfg", should be 0, user is 95.
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/classlist" , should be 0, user is 95.
Permissions differ on "Library/Application Support/Apple/ParentalControls/ContentFiltering", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "Library/Application Support/Apple/ParentalControls", should be drwxrwxr-x , they are drwxr-xr-x .
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Group differs on "private/etc/cups", should be 0, group is 26.
Permissions repair complete

Hi,
You mentioned the machines are all from a single image. I realize you are an experienced ARD user. However, there are quirks in this app at any stage of development. I'm sure you already applied a unique name to the shared network name and have no DHCP conflicts as well as checked that all the accounts, not just the admin account that permissions are checked. Although you may have all the correct ports addressed and configured, there is no accurate accounting for the gremlins. These play havoc across the network. Sometimes the only thing you can do is go to the machine and walk through the settings as if it was the first time. I can't tell you how many times a problem has resolved itself after just logging into the admin and redoing the settings. I mean the exact settings that are already selected. Sometimes the settings were actually wrong, even ones that came from an identical image. Like forgetting to select the observe and control selections in the sharing options for all the users. Other times it was simply deselecting and reselecting the options and restarting that snapped the machine out of the funk.
Aside from the occasional discovery of admin setup issues, I live by the motto "the simplest solutions are usually the best, and should be tried first". Glitches do happen though. Sometimes running the scanner and reselecting and dragging the same machine into your user lists can refresh a connection that is not acting properly. I have detected countless quirks that cause strange side effects. Do a get info on the specific machine and delete the IP, then make sure you have the "name".local in the DNS name field. Re-enter the admin or try a user account name in this experiment and test this. This has given me clues to setup issues before having to go to the machine. I know this stuff sounds simplistic but it has solved most of my issues.
Good Luck

Win 7 PC freeze and block network access for other PC on same switch during windows update from WSUS

Hello,
It's been a problem for me for a long time now, but the last time (today) I found 3 PC on 2 different switches that block all the network on this 2 switches during the update.
I have a Domain with 80 PC with Win 7 (32&64bit) that takes the updates from the WSUS server that is configured on a Win2k8 r2. The system works well from 2 years from now but sometimes cause this errors that make me look like a dummy in front of angry
employees. If one of the PC get freeze , it will cause lost of connection on all the PC on same switch, and i have to find the blocked PC, remove from network, restart switch and hope that they will came back on.
Does anyone experienced this problem? Any help will be appreciated
Thank you!
List of updates for today below

Hi
Thanks for your response, yes I understand that the result is a Broadcast Storm and yes I have the cheapest switch on market :/.
The interest fact is that on one PC, I changed everything and keep only the old HDD and on last updates yesterday it was one of the blocked one too. So this make
me doubt that is something wrong in software on that PC. I don't have any third-part programs except browsers and all have Genuine Win7
The only investigation remained is what happens during the update process?
Is WSUS involved in something?
And another thing is the fact that some of the PC are cloned, but I have carefully changed the SID
Thank you for your support

During an update my iphone wiped all the music I had bought on itunes on my phone and i hadnt backed it up, how do i get those songs back?! help!!!

help! during an update it somehow went terribly wrong and restored my phone back to factory settings! I didnt lose my photos or contacts but have lost all the songs i bought via my itunes app! I admit I havent backed up recently, but how do i get those songs back?!

Contact iTunes support, plead your case, and request they add the lost music to your download queue. Be nice, as they are under no obligation to do so:
http://www.apple.com/support/itunes/contact.html

How do I resolve this problem: This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required

When attempting to log in to the web site the following message is received. This web site works
on other systems using Firefox.
This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required.
Additionally, a 401 Authorization Required error was encountered while trying to use an ErrorDocument to handle the request.
== URL of affected sites ==
http://www.mdyc.org/members_only

You may have saved a bad password so Firefox is entering that rather than giving you the option to try again. Go to Tools > Options > Security > Saved Passwords and delete the saved passwords for that site and then try logging in again.

I downloaded the 4.0.1 and have had 10 updates so far. Firefox freezes up constantly and is now locking up during the updates. What the heck is going on?

I downloaded 4.0.1 Saturday and have had 10 updates so far, including 5 today. I am now up to 4.0.10.
Since I updated, Firefox keeps locking up while I am using it. It is now locking during the updates.
Why so many updates so soon.
What is wrong with Firefox and when am I going to be able to get on the web without locking up constantly?

I have Internet Explorer as well, but, It says I need Adobe to go to Facebook. When I try to download Adobe, I says IE must be my primary browser. I have no idea how to change, do you?
Firefox is especially bad at locking up when I am playing games. Have you had this problem?
I will switch immediately if I can figure out how.
Thanks so much for any help.

Remote Desktop Client update 3.8.2 keeps appearing

I installed the remote desktop client update 3.8.2 on my mini (Yosemite) without any probs. On my Air it is appearing over and over again although it shows up (5 times in the meantime) as being installed correctly.
Whats going wrong?
I had this issue with one of the latest printer updates, but was able to solve this by downloading the installer separately.
Is there a download for the remote client update anywhere.
Thanks
Stefan

Try re-indexing Spotlight.
Spotlight – Re-index
If that doesn't work, try control - clicking on the update to see if you get a Hide Update option.

Ipod rebooting during/after update

My 30g video iPod is rebooting during or after I attempt to update. Nothing is saving to the iPod during these updates. I have done the 5 Rs, reformatted my iPod, as something was horribly corrupt. Now I have this new problem. I am at a complete loss as to what else to do to stop this issue. Any help would be greatly appreciated.

I had the same problem (the iPod kept rebooting after being ejected) and I went to the Apple store in Toronto to see if I was doing something wrong.
The girl told me to send it back again to Apple... this only after I had just got it back from Apple the same week; they aslo said there was nothing wrong even though, and that it was my computer(s), despite the fact that the behavior was exactly the same thing again on multiple computers.
It would only stop rebooting if I set it to disk mode while connected then restored the iPod (thus erasing all my files...).
I'm going to send it back again and see what they say...

With Cisco Secure ACS 4.2 User accounts gets locked at first instance of wrong credentials even if configured for 3 attempts

Hello Everybody,
I am working with Cisco Secure ACS 4.2 and it is integrated with Active Directory at a Windows 2008 R2 functional level, user accounts that are set with lockout parameters (3 incorrect attempts) are locked out prematurely after the user enters the wrong credentials just once, the integration is done via LDAP.
I wonder if anybody has any idea why this is happening, because when I connect to a Cisco device or VPN, and type my password wrongly, on the Active Directory I get extra bad password counts.
Thanks in advance and regards....

Hello Scott,
Thanks for your answer. However we checked the ACS logs and it shows that we entered bad credentials just once, but in the Active Directory our account sometimes is blocked because we get at least 2 and sometimes 3 failures. This problem is only presented when we authenticate Cisco devices or through VPN, in normal circumstances, when users enter bad credentials on their computers, it works fine.
Thanks and regards...

HT6114 My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour.

My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour. Any thoughts?

Update2: There is something very wrong with wireless on mountain lion recovery. I don't know what the problem is, but this link may explain:
http://osxdaily.com/2012/08/10/os-x-mountain-lion-10-8-1-beta-released-for-dev-t esting-may-include-wi-fi-fix/
Wireless recovery would start out with over 25 hours estimated and kept on failing. It turns out to be a two step process of downloading a few Mbytes then a 4Gbyte .dmg file, but I couldn't even download the Mbyte file. I bought the thunderbolt to gigabit ethernet adapter, plugged it in, restarted recovery and download of a little more than 4Gbytes took less than an hour. My limiting factor was probably comcast home internet rate of 12Mbps. The wi-fi wireless connection should be able to do over 100Mbps, so wireless shouldn't be much slower than wired, except wi-fi wireless is broken. Now that ML is installed and updated, wi-fi seems fine now, as I am using it right now, but I haven't tried downloading a big file yet.
Don't use wi-fi wireless for Mountain Lion recovery.

Cannot verify signature block SecurityException during version update

Hi all,
I have my application installed on few systems using webstart. All the jars(including third party are signed by my certificate).
After that, during an update, I signed all the jars using a new certificate.
I have placed new jars in the cache server(Tomcat 5.0) and started it.
Now I made necessary version changes in the JNLP file(while the server is running).
When I started application on client machines, it tried to bring get the jars of updated version.
During that process, following exception is shown while downloading a thirdparty jar:
java.lang.SecurityException: cannot verify signature block file META-INF/ABC
     at sun.security.util.SignatureFileVerifier.processImpl(Unknown Source)
     at sun.security.util.SignatureFileVerifier.process(Unknown Source)
     at java.util.jar.JarVerifier.processEntry(Unknown Source)
     at java.util.jar.JarVerifier.update(Unknown Source)
     at java.util.jar.JarFile.initializeVerifier(Unknown Source)
     at java.util.jar.JarFile.getInputStream(Unknown Source)
     at com.sun.javaws.security.SigningInfo.checkSigning(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol$RetrieveAction.actionDownload(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.getResource(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
     at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
JNLPException[category: Download Error : Exception: java.lang.SecurityException: cannot verify signature block file META-INF/ABC : LaunchDesc: null ]
     at com.sun.javaws.security.SigningInfo.checkSigning(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol$RetrieveAction.actionDownload(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.getResource(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
     at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)I restarted the cache server (Tomcat).
Now the download went fine. Otherthan restarting the server, no other changes were made.
What could be the possible reason? Updating the JNLP file while server is running is a problem?
I tried this to recreate this scenario several times.
On certain occasions, I came across above exception along with another exception:
com.sun.deploy.net.JARSigningException: Could not verify signing in resource: (http://abc.xyz.com:5967/XXX/JARS/ThirdPartyJars/abc.jar, 8.0)
at com.sun.deploy.cache.CacheEntry.writeManifest(Unknown Source)
at com.sun.deploy.cache.CacheEntry.access$1800(Unknown Source)
at com.sun.deploy.cache.CacheEntry$9.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.deploy.cache.CacheEntry.writeFileToDisk(Unknown Source)
at com.sun.deploy.cache.Cache.downloadResourceToTempFile(Unknown Source)
at com.sun.deploy.cache.Cache.downloadResourceToCache(Unknown Source)
at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
at com.sun.javaws.Launcher.downloadResources(Unknown Source)
at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Everytime, after restarting the cache server, update download went fine.
Does anyone come across such thing?
Please Help me out.
Thanks in Advance..

I have JRE 1.5.0_14 in the client machine.
Once this exception comes, no matter how many times I tried to relaunch the application same exception (cannot verify signature block is shown. Once i restart the server, its working fine.
Regarding jardiff, Yes. we use it.
Also, this exception is not shown on every machine which are trying to download same update. Only on few..
Any idea regarding this, please share it.
Chakri
Edited by: chakriv on Mar 22, 2010 9:02 PM

TS3274 my ipad displays "ipad disabled,connect to i tunes",but if connected to itunes it doesnt recognizes it because of the wrong passcodes entered several times.and when i go to restoring, i could not find the summary in the device panel in my i tunes.h

my ipad displays" ipad disabled, connect to i tunes" but if connecyed to i tunes, it doesnt recognizes it bec.of the wrong passcodes entered several times.so when i go to restoring ipad, i couldnt see the 'summary' in the device panel in my i tunes.what will i do? pls help...

You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
Try using Recovery Mode
iPad: Unable to update or restore

Wrong credentials entered during Client update

Similar Messages

Maybe you are looking for