Wrong Currency shown in Bex Analyzer / SFr. Symbole in Excel

Hi Experts,
Hi have a question regarding the display of currency in Bex Analyzer.
I have a report showing Euro in the most of columns and one column should shown usd. The conversion is done in the backend.
By running the report the column which should show USD show SFr. (Not a currency).
In Excel i checked in format cell--currency. There SFr. is define as Symbole. It is a general problem. How to solve it?
Thanks
Gilo

Hi Andrey,
thank you for replying.
Have you added IO currency to rows ?
-- Other Columns with Euro are showing the correct currency.
Does your conversion work correct ?
-- Yes
If you execute the report in bex query designer (via web) do you get correct results ? i can not execute via web.
I execute in rsrt and the column is showing the result with $. I expected to see USD.
1. why is bex showing the wrong currency?
2. why is the result under rsrt with $ instead of USD?
Thanks
gilo

Similar Messages

BI 7.0 Bex Analyzer not working with excel 2007

Hi All,
I have installed the BEX 7.0 with MS office 2007 but the Analyzer is not working. The open file symbol does not give any option on the click.
Please help.
Regards,
Abhishek

Hi Abhishek,
This is a BEX Add-in problem.
Follow the below step....
1. Copy the Tool
2. Change the Tool.xls into the Tool.xla
3. Copy the Tool.xla file
4. Open My Computer window
5. Navigate to the following folder
a. C:\Program Files\Common Files\SAP Shared\BW
b. Paste Tool.xla file into this folder
6. Open Bex Analyzer
7. Open a Query or Workbook
8. Click on the u201CToolsu201D Menu on the Top
9. Select u201CAdd-Insu201D from the Tools menu
10. Click Browse from the Add-Ins window that opens
11. Browse to the file you just saved
a. C:\Program Files\Common Files\SAP Shared\BW\ Tool.xla
b. Click Ok to continue
12.The Tool for Excel should not be checked in the Add In window
13.Click Ok to continue
14. Close
15. Re Open Bex Analyzer
16. The Tool command should be displayed at the top of the Tool Bar
17. Close Bex Analyzer
18. Open Excel
19. The Tool command should be displayed as well at the top of the Tool Bar.
Hope this helps...
check the below link
http://www.sytecpa.org/software/BWInstructions/Installing%20the%20SAP%20BEx%20Analyzer%20Excel%20Add-In.pdf
Regards
KP

Error when using BeX Analyzer 7.0 with Excel 2007

When i try to execute a query in BeX analyzer 7.0 and my microsoft excel version is 2007, there will always have a fatal error showing. However, when i use the Bex Analyzer 3.5 , i could execute the query.
Anyway to solve this problem?

You need to do the following
Identify the SAP GUI version you're using, 6.40 or 7.10, and the patch level.
Identify the BW or BI Add-on and patch level of it.
From there, check to see if the versions you have actually support BI 7.0 and Excel 2007. Reliable Excel 2007 support requires failry current patch levels of both the SAP GUI and the corresponding BW/BW Add-ons..
Do you have access to a PC that has a more recent version of the SAP GUI and BW/ BI Add-on? If so, try using that PC and see if you still have the problem.

Problem opening BEx Analyzer Workbook (saved in Excel 2007) in Excel 2003!!

Dear all:
I know there are threads about this issue and numerous support tickets have been provided, but we still can't get any Excel 2007 Query to be opened by Excel 2003.
I have tried to save Excel 2007 BEx Analyzer Query into 97-2003 XLS format. But when we reopened (by both Excel 03 and 07), it prompted the warning messages and broke down the query workbook into several sheets with scrambled data. What am I missing here...? According to the support ticket, it seemed pretty straightforward just by saving the format to 2003 XLS, but in reality it just doesn't work as "advertised"
Thank you...!!!
Brian

I have the solution for this.
It works to my environment.
Follow the steps :
1. you must open the xlsx workbook from Bex Analyzer.
2. Save As workbook locally to your PC for excel 97-2003
(Not "save as" from bex Toolbar but from excel)
3. Now save that workbook with Save As->Workbook from Bex Toolbar into your BI database.
Now go to detail properties of your workbook and there you can see the format xls for your workbook.
Good Luck

Wrong values shown in Bex report

Hi,
I've created a Bex report using 0IC_C03. my report is pretty simple, it has 0VALSTCKVAL as the key figure. As characteristics i have plant/ Movement type/ Storage location
Initial view it shows by Plant and no problems with the figures, but when i drill down on Location it shows 1 additional line for storage location with #, all the figures are assigned to this row. The row with the correct storage location has 0 in the key figure ! when i checked the cube there is no records with storage location #.
Table
Plant                          Storage location                                             Movement Type     Value of valuated stock
WH05     WH05     #     WH05/Not assigned                                    963                           15,224.97 EUR
                                                                                Result           15,224.97 EUR
          E005             WH05/E005                                             963                                    0.00 EUR
                                                                                Result                    0.00 EUR
                                                                                Result      15,224.97 EUR
                                                                          Overall Result                         15,224.97 EUR
All the above values should be assign to WH05/E005 not to #. any help on the right direction is greatly appreciated.
thanks
Fazal

Hi,
I do not know in which case Storage location values will not be maintained but what i can suggest this is something to do with ECC.
I feel data comes froM ECC to BI side so whatever is not there will not be present in BI as well.So its better to take help of functional guys and let them understand the issue and probably they can decide whehter theings to be done in ECC or BI side.
Hope it helps.
Regards,
AL:

Drilldonw Icon in BEx Analyzer 3.5 with Excel 2010

We have recently upgraded to Windows 7 and Office 2010. After the Upgrade in 3.5 Workbooks, when we drill down, instead of seeing an Arrow (to be clicked to open the details), we see a Square which can not be used to drill-down.
Has any one experienced thsi issue?
Thanks
Amit

Note 1435529 can help you in this regard. You will find it easily else visit the following link.
http://www.slideshare.net/WooDonghoon/note-1435529-sapbw-news-nw-7x-bw-addon-frontend-patch-200-gui-720

BEx Analyzer displays wrong number of decimal places after implementing BW patch

Hey folks,
we patched our BW 7.31 from PL10 to PL15 last weekend and now we got some issue with the number of decimal places shown in BEx Analyzer 7.x.
One example for KF X
Settings Info Object X
Decimal Places:                         Not defined
RSRT - Display X
Shows 3 decimal places
Query Designer Settings using KF X
Number of Descimal Places:     0 [Use Default Settings: NO]
BEx Analyzer Properties for KF X
Decimal Places:                         0
Resulting in BEx Analyzer workbook shows 3 decimal places instead of 0!
Anyone with an good idea about that?
Thanks,
Andreas

Hi Andreas,
Have you used the list calulation like "Calculate Result As Average" or "Calculate Single Values as normalization of result" in the relevant key figures?
For "Calculate Single Values as normalization of result",iIt is the known design that it is always displayed with three decimal places for normalized values, and the setting in Query Designer for
decimal place doesn't take effect.
For "Calculate Result As Average", the following note maybe relevant.
2096911 - Decimal places in query result is wrong, if average is used and display precision is set to less than 3, it will always show 3 decimal places.
Another clue is to check if the key figure is a Quantity type with unit, and what's defined in table
T006 field ANDEC for this unit.
Hope this helpful.
Regards,
Ceciclia

BEx Analyzer: Formula Variable with Replacement path change Month with Day

Hi experts I'm facing this issue in BEx Analyzer.
I need to have some dates in format DD/MM/YYYY in Index Structure, in order to do this I've created a formula variable with replacement path referenced to 0CALDAY characteristic.
The formula works but it behaves in a strange way:
if the day is higher than 12 the displaied result is correct (DD/MM/YYYY)
if the day is lower or equal 12 the displaied result is wrong (MM/DD/YYYY)
I'm on BW 7.01 SP6 and BEx Analyzer 7.10 SP12, excel 2007.
anybody has faced this issue before?
any help will be appreciated
Daniele Cortopassi

Hi Daniele,
This seems pretty strange. Pls. redo validation with the dump data, as being a flat struture BEx does not apply any logic changes. May be it might have been MM/DD/YYYY format as in workbooks. Else you may change the property of 0calday display as "Text". Business Explorer > Display > KeyMaster Data/Texts > Texts (Plese check this option). If you are using some text table you may maintain the same using BI0/TCALDAY (Similar to BI0/TCALMONTH2). Guess it should be an excel based issue; if not you may try the same in WAD/Report designer to verify the nature of the issue. If you don't face these inconsistencies in WAD/RD then you may change excel formatting options. Lastly, please let us know if the infoobject has some predefined settings in RSA1 > Infoobject > (BEx) Properites.
Thanks,
Arun Bala

MS Excel in the Bex Analyzer is not working

HI
If I start Bex Analyzer (BI7.0) , MS Excel is not working.
So There is no userid pop screen on the MS Excel Screen.
Whats' wrong ?

Hi,
Which version of excel are you using?
Try with the SAP GUI 7.10 with the latest SAP BI Addon Component. You can download it from SAP Service Market place.
Downloads - Support Packages and Patches - Entry by Application Group - SAP Frontend Components - BI ADDON FOR SAP GUI - BI 7.0 ADDON FOR SAP GUI 7.10 .
The latest patch level for SAP BI Addon Component is 1300 (bi710sp13_1300-10004472.exe).
Hope this helps.
Regards,
Hari.

BEx analyzer like functionality in BO

Hi,
Is there a tool in Business objects which provides me all the functionalities of BEx Analyzer like drill down, excel like look etc.
Regards
Vaibhav

Hi,
BO every tool having one purpose please check the below link to get more informaiton about BO with BI functionalities:
http://www.sap.com/solutions/sapbusinessobjects/large/business-intelligence/index.epx
Thanks,
Venkat

How to make BEX analyzer work in ALV?

Hai,
As we have an export button on alv, it has 2 options : EXCEL & Bex Analyzer.
Export to excel is working fine, but Bex is showing a dump as follows:
The following error text was processed in the system ECD : You can only work in client 000
The error occurred on the application server haasdevecc_ECD_01 and in the work process 0 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
Function: RS_MANDT_CHECK of program SAPLRSMANDT
Form: CLIENT_CHECK of program SAPLRSDG_IOBJ_DB_READ
Function: RSD_IOBJ_INCL_ATR_NAV_GET of program SAPLRSDG_IOBJ_DB_READ
Function: RSD_COB_PRO_GET_ALWAYS of program SAPLRSDI
Method: GET_COB_PRO of program CL_RSR========================CP
Form: INITIALIZE of program SAPLRRSI
Function: RRSI_VAL_SID_SINGLE_CONVERT of program SAPLRRSI
Method: GET_CHANMID of program CL_RSR========================CP
Method: CLASS_CONSTRUCTOR of program CL_RSR========================CP
Method: CREATE_COBPRO_FROM_DDFIELD of program CL_RSROA_BI_QUERY=============CP.
<b>Can anyone help to know what are the requirements to be installed inorder to make Bex analyzer work?
or Disable only bex analyzer and allow excel option?\</b>
Cheers,
Madhu.

Hai,
As we have an export button on alv, it has 2 options : EXCEL & Bex Analyzer.
Export to excel is working fine, but Bex is showing a dump as follows:
The following error text was processed in the system ECD : You can only work in client 000
The error occurred on the application server haasdevecc_ECD_01 and in the work process 0 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
Function: RS_MANDT_CHECK of program SAPLRSMANDT
Form: CLIENT_CHECK of program SAPLRSDG_IOBJ_DB_READ
Function: RSD_IOBJ_INCL_ATR_NAV_GET of program SAPLRSDG_IOBJ_DB_READ
Function: RSD_COB_PRO_GET_ALWAYS of program SAPLRSDI
Method: GET_COB_PRO of program CL_RSR========================CP
Form: INITIALIZE of program SAPLRRSI
Function: RRSI_VAL_SID_SINGLE_CONVERT of program SAPLRRSI
Method: GET_CHANMID of program CL_RSR========================CP
Method: CLASS_CONSTRUCTOR of program CL_RSR========================CP
Method: CREATE_COBPRO_FROM_DDFIELD of program CL_RSROA_BI_QUERY=============CP.
<b>Can anyone help to know what are the requirements to be installed inorder to make Bex analyzer work?
or Disable only bex analyzer and allow excel option?\</b>
Cheers,
Madhu.

Currency symbol in Bex Analyzer

Hi gurus!
I have to key figures. One has a value in dollars and the other in mexican Pesos.
Now, in Bex Analyzer, the dollar symbol is in the left of the value and the symbol of the pesos is in the right of the value. Could I change the dollar symbol to the right of the number? Is ti possible? How?
Thanks in advance.
Regards.

SPRO -> SAP NetWeaver -> Business Intelligence -> Settings for Reporting and Analysis -> General Settings for Reporting and Analysis -> Set Alternative Currency Display
OR
spro->bw->reporting relevant settings->alternative currency display.
Here u can change after value or before value

Customer names with cyrylic characters are wrongly shown in Bex Analyser

Customer names with Cyrillic characters are wrongly shown in Bex Analyser. The master data is correctly maintained and extracted\loaded by BW for these customer (Master Data object is correct). This might be a Bex Designer issue.
Furthermore, it has nothing to do with the local settings, when copying the name of the customer to Bey Analyzer the name is correctly shown.

Hi,
We are facing the same problem with the turkish characters, Our system is BW 3.10 (3.30 Cont) and ECC 6.0. The turkish characters are displaying correctly at the table level, but not at the RSRT or the Bex level.
The turkish characters are displaying correctly at the table, RSRT and Bex level if we load the same record from the Non-unicode Prod system to the Non-unicode BW Dev system, but if we load from the unicode QA system the same record is not displaying correctly.
Has anybody got a solution for this issue
thanks
Kalyan

BEx Analyzer (7.x): currency change when new formula created

Hi All,
I have a strange one. Query is executed in BEx analyzer. A new formula is created outside the query results window using excel functionality, and the currency changes from USD to DM.
Example query results:
Cell A1: Var 1 = $150.00
Cell B1: Var 2 = $160.00
Cell C1: Var 3 = $70.00
New formula created using excel functionality: =sum(A1+B1) displays as 310.00 DM
The language settings have been checked for the operating system and for SAP (user data) and they appear to be correct. Is there another setting to be checked?
Thanks,
Pam

sap said it was working as designed. suggested we look at regional settings on laptop and make a workbook template with us settings.

Wrong message while running report in bex analyzer

Hi Experts,
I have created an authorization object based on compnay code. I use the option RSECADMIN => Analysis => Execute As, to test this authorization object. When I give incorrect company code value, it displays correct message that is 'No authorization'.
But when I test in bex analyzer for same report, with same incorrect company code value instead of showing 'No authorization' message, it shows 'No applicable data found' message. Is there anything wrong here?
How can I show the correct authorization message 'No authorization' in bex analyzer, when incorrect company code is supplied?
Thanks,
Purvang

Hi Pratap,
thanks for reply.
I also thought that way initially but then was skeptical of different message received while testing in RSECADMIN. If SAP is going to show 'No applicable data found' message then how will a user have any idea that actually he is not authorized for the supplied value of company code.
does anyone know if this is bug or is there any workaround to show right message i.e. no authorization.
Thanks,
Purvang
Edited by: Purvang on Oct 19, 2011 3:18 AM

Wrong Currency shown in Bex Analyzer / SFr. Symbole in Excel

Similar Messages

Maybe you are looking for