Wrong data posting in the infocube

Hi Gurus,
When we are writing in our infocube with BPS (not depending on interface type), data are stored on wrong characteristic.
For example : we are writing on the Characteristic "1" and data is stored on another characteristic. As a result, no data have been changed and we cannot do the budget.
Thank you in advance for your help,

Hi;
I am not sure how to do correct your wrongly assigned data; but if you don't find any good answers may be you can try deleting the wrongly assigned data from that char and post again to the correct one...
BK

Similar Messages

Is there any way for updating wrong data in ODS and infocube?

Hi all
Is there any way for correcting wrong data in ODS and infocube?

You could do a selective deletion, by specifying the filter values, so that you only delete a subset of the entire data. You could then do a re-load for the same selection so that there is no duplication of records.
This is on the assumption, that your incorrect data is due to some incorrect update or transfer rules, which you have now corrected (before the re-load).
mate, you have mentioned that You could then do a re-load for the same selection .
could you please tell me how to do a re-load ? thank you very much

PO process by interface was wrongly GR posted.automatic the GR

Hi Gurus,
PO process by interface was wrongly GR posted.automatic the GR posting didn't registered the correct amount of the PO for the line item ($1746) but for less ($1) is posted.automatic GR posted with a wrong/different amount from line item.
We are canceled GR and post it again looking for system to recognize it correctly but this was useless.after GR posted for I$ DOLLAR,we are posted IR doc also.Im still pending for analysis of the reason why this GR was wrongly posted,your instructions and explanation of situation appreaciated.please help me.
Regards
SAP MM

Hi,
Check the tolerance limits defined in IMG under
Materials Management -> Inventory Management and Physical Inventory -> Goods Receipt -> Tolerance Limits
Also, check "over delivery" and "under delivery" tolerances defined in Material Master under "Purchasing" view.
Also check in IMG under
SAP Netweaver -> General Settings -> Currencies -> Define rounding rules for currencies
For the company code/currency combination for which payments are to be made not in the smallest denomination, but in a multiple of it, enter the currency unit (rounding unit) to which amounts are to be rounded.
This ensures that the amounts in this currency are always rounded to this unit (providing the amounts you enter manually are also rounded in line with your entry). The payment program evaluates your entries to determine the cash discount and rounds off the amount accordingly.
Regards,
Srilatha.

How to correctProcess Order confirmation data posted in the previous month

Hi All PP Gurus,
Can anybody tell me the answer of following
How we can correct the process order confirmation data posted in the previous month.

Dear Ashok/Brahmankar,
Actually i am facing the following problem:-
1) If you cancel the confirmation done in the previous month by the tcode CORS, the CO document is posted in the previous period because we cannot change the posting date in CORS. But the previous period is already closed.
Can we change the posting date in CORS manually? Or do you have any other idea?
2) When reading the master data in COR2, I face the error because the status of PO is already set as 'DLV'.
Do we need to read the master data even when the value is changed in KP26?
Thanks,
Narayan

IPhoto imports photos with wrong dates even if the dates are fine on the camera

Hi!
When I import photos with iPhoto, sometimes it imports them with wrong dates, even the dates are fine on the camera. It puts dates such as 2032. Does anyone know how can I fix that. As far as I know there is no way to change dates of the photos.
Thanks!

well that is very confusing since if the date is correct on the camera it will be correct in iPhoto
and as to
As far as I know there is no way to change dates of the photos.
Try looking through your iPhto menus - two commands - adjust time and date and batch change time and date - asjust is used to correct incorrect dates like a comera setting - Batch change for missing dates like with scans
LN

0IC_C01 No data available in the infocube maintenance

Hi Experts,
Recently i've implemented Inventary. After loading Inventary stock, Material movements, Revaluations. I can't view data in the infocube contents.
Where i'm doing mistakes please share your ideas.
Siri

Hi Siri,
You mean to say that data laod was successful but you could'nt find records in the Infocube.What was the processing type you used in the Processing tab page?.
Try loading data from PSA manually if nothing works(Temporary solution only).
If there are any errors during dataload please do the appropriate corrections.
Regards,
Harold.

Checking the Data Loaded in the InfoCube

Hi all,
With 3.x version and also with RSA1OLD, it's possible to see infosources that can be loaded for this data target and their status with infosources overview.
Now, with 2004s version, there's no Infosources. It was really helpful to see if all master data are loaded.
Is there any new functionality? RSA1OLD is still necessary?
Thanks
Best regards

Hi Andreas and Michael,
Thanks for replies.
Andreas, not exactly, it's more about DTP than PSA.
I know how to view all information one by one. But for an Infocube you can have x Master Data (texts, attributes and hierarchies).
How can I see if all data are loaded? (date and status)
As Michael said, we can use the process chain to check if all init, delta or full are successfully loaded. But we need to check it in more than 5 process chain.
With "overview infosources" it was possible to check with just one click if all data are loaded.
You're right Michael it's clearly more about ergonomy.
Best regards

Why is the wrong date displayed in the month view?

Hi there,
I just noticed something in the calandar for iOS7. If you are in the month view, the highlited date is the the priviuse day (fx will highlight the 18 Sep when we have the 19 Sep). but if you go in to the week view, the correct date is highlighted. Any idea's???

I had the same problem...in Calendar/Month view, the calendar heading (top left) did not match what was shown. For example, I would be seeing January 1 to 31 and the heading would be December. As I scrolled down the months, the heading would lag one month behind. With guidance from Apple, I did a iCloud backup, then did a factory reset. With the "new iPad" everything worked well. I then downloaded my backup (all my data and apps) and the problem came back. Tried a couple of things and what eventually solved the problem was removing the gTask app (which I had tried but was not using), then did a "Reset All Settings...no data erased) and now everything is working as it should. Seems to me that there is a conflict with the Apple apps and gTask.

HT201210 How do I delete credit card info installed in accts billing.wrong data submitted to the App Store, I tunes

There is someone's personal info on the iPad I just bought from my cousin. IPad cannot Update apps bcuz there is a billing error with this persons credit card when entered not iPad from previous owners. I need to find out how to delete all info regarding previous owners info.

Read this First... Before proceeding to Next
What to do before selling or giving away your iPhone, iPad, or iPod touch
This is what your cousin should have done before giving you the Device.
Next...
See Erase your device Here > http://support.apple.com/kb/HT4137
Go to Settings > General > Reset > Erase all content and settings

Wrong cancellation date seen in the order

Hi,
Today i.e 10th July 2011, Sunday evening at around 5.45 pm I called up the line cancellation number 0800 800 030 and requested that my landline be cancelled on 18th July. I was informed that generally two weeks notice is required and hence the line will be cancelled on 25th July. I was even informed about the cancellation charge. I was fine with it. But I was utterly shocked, when I logged into my bt.com online account, under track my order, I saw the cancellation date mentioned as 11th July.
Can someone please confirm that the line would be cancelled on 18th July as per my request and not on 11th July? It would be highly disrupting to me if the line gets disconnected on 11th July.
Please advise !
Best Regards
Deeply anguished BT customer.

gladiator wrote:
Thanks! toekneem for the response, Can you please tell me whom do I ring up? Yes, luckily it is still working it is 22.24 pm on 10th July as I type this. I tried calling all possible help lines, everywhere I get the message that the support works from 9 am to 6 pm on Sundays !
Hi, the only numbers I can see are all closed. Ring up first thing in the morning.
You can contact the mods on here who are BT employees, but the time it takes (upto 72 hrs) is not gonna help you out. Keep your fingers crossed that they have the wrong date down on the site.
Anyway contact form if you did need it is:
http://bt.custhelp.com/app/contact_email/c/4951
Is there no way that you can log into MY BT and cancel the cancellation
toekneem
http://www.no2nuisancecalls.net
(EASBF)

I have request in the report level but the same is missing in the infocube

Dear Experts,
I have request in the report level but the same is missing in the compressed infocube level. What could be the cause? does the compressed infocube deletes the request ? if so, I could able to view other requests under infocube manage level.
Kindly provide with enough information.
Thanks.............

Hi
Compressing InfoCubes
Use
When you load data into the InfoCube, entire requests can be inserted at the same time. Each of these requests has its own request ID, which is included in the fact table in the packet dimension. This makes it possible to pay particular attention to individual requests. One advantage of the request ID concept is that you can subsequently delete complete requests from the InfoCube.
However, the request ID concept can also cause the same data record (all characteristics agree, with the exception of the request ID) to appear more than once in the fact table. This unnecessarily increases the volume of data, and reduces performance in reporting, as the system has to perform aggregation using the request ID every time you execute a query.
Using compressing, you can eliminate these disadvantages, and bring data from different requests together into one single request (request ID 0).
This function is critical, as the compressed data can no longer be deleted from the InfoCube using its request ID. You must be absolutely certain that the data loaded into the InfoCube is correct.
Features
You can choose request IDs and release them to be compressed. You can schedule the function immediately or in the background, and can schedule it with a process chain.
Compressing one request takes approx. 2.5 ms per data record.
With non-cumulative InfoCubes, compression has an additional effect on query performance. Also, the marker for non-cumulatives in non-cumulative InfoCubes is updated. This means that, on the whole, less data is read for a non-cumulative query, and the reply time is therefore reduced. See also Modeling of Non-Cumulatives with Non-Cumulative Key Figures.
If you run the compression for a non-cumulative InfoCube, the summarization time (including the time to update the markers) will be about 5 ms per data record.
If you are using an Oracle database as your BW database, you can also carry out a report using the relevant InfoCube in reporting while the compression is running. With other manufacturers databases, you will see a warning if you try to execute a query on an InfoCube while the compression is running. In this case you can execute the query once the compression has finished executing.
If you want to avoid the InfoCube containing entries whose key figures are zero values (in reverse posting for example) you can run a zero-elimination at the same time as the compression. In this case, the entries where all key figures are equal to 0 are deleted from the fact table.
Zero-elimination is permitted only for InfoCubes, where key figures with the aggregation behavior SUM appear exclusively. In particular, you are not permitted to run zero-elimination with non-cumulative values.
For non-cumulative InfoCubes, you can ensure that the non-cumulative marker is not updated by setting the indicator No Marker Updating. You have to use this option if you are loading historic non-cumulative value changes into an InfoCube after an initialization has already taken place with the current non-cumulative. Otherwise the results produced in the query will not be correct. For performance reasons, you should compress subsequent delta requests.
Edited by: Allu on Dec 20, 2007 3:26 PM

Uploading photos from PC to Photo library results in wrong date/time

Uploading photos to iCloud photo library using icloud.com will result in wrong date/time of the photos, which is, to be precise, 15 hours later than the actual time in EXIF. Thanks in advance.

iTunes is not a photo management program, never has been.
Delete the pictures (or remove them from the folder that syncs). This has absolutely nothing to do with iTunes.
If the Photo tab is not displaying in iTunes, resize the window.

RMS wrong data returned

Most of time I am getting the right result back, but occasionally, I am getting wrong data returned from the record store.
I am storing a string of numeric characters only from a text field as bytes. It is only a maximum of 4 characters and quite often it seems to come up with 100, when that was not the value that was saved.

Just to tie this off, this behavior was observed on 10.2.0.1 on both Windows and Linux. However we've verified that it is fixed in the 10.2.0.3 Patchset (Patchset 5337014) on Windows. I was unable to find an Oracle ticket that directly corresponded to this behavior, but it appears that there were similar-ish problems with query plans created to support NLS behavior and those must have addressed some fundamental issues.
Thanks,
-Michael

Grabbing xml from raw data post to my webserver

Trying to figure out how to catch xml being posted to my webserver. The client's instructions are:
The HTTP and HTTPS delivery method performs a text/plain mime binary data post to the supplier's webserver. Suppliers must develop a catch web page. This page will receive the binary post.
This is an xml document that I must capture and write to disk. I'm intending to use a java servlet to grab this data but java is new to me. It looks like HttpServletRequest is what I'm looking for. Anyone with any pointers?
thanks,
destin

Okay, I've got some coding off a site that looks like it will do what I want. It's quite a robust applications which will do more than I need but as long as it does at least what I want, i could care less. As it will extract files from the datastream for me, it is going to save them to disk.
I believe I have to specify a directory to save it to. I believe this is the line I'm going to modify, so assuming that's the case, how do I specify a directory here:
private File fileOutPutDirectory = null;
Do I have to use absolute paths or can I use relative. Also, what directory construct is expected by java? Anyone with an example of what urls are supposed to look like in this case?
Thanks,
destin

Lookup Characteristic on IP data post (FUNDS_CTR- COMP_CODE)

Hello.
In my case, funds centers belong to appropriate company code, say
FUNDS_CTR1, FUNDS_CTR2, FUNDS_CTR3 belong to COMP_CODE1
FUNDS_CTR4, FUNDS_CTR5, FUNDS_CTR6 belong to COMP_CODE2
FUNDS_CTR10, FUNDS_CTR11 belong to COMP_CODE3
etc.
I got IP-enabled InfoProvider with 0COMP_CODE and 0FUNDS_CTR. I've created aggregation level on 0FUNDS_CTR. Is it possible to create lookup mechanizm (by ABAP or some type of hierarchy or whatever) to get comp. code by funds center on data post to the InfoProvider? Back to the example:
Then user chooses FUNDS_CTR4 I post this value with COMP_CODE2 value
Then user chooses FUNDS_CTR11 I post this value with COMP_CODE3 value
etc.
thanx in advance,
points will be awarded

Hi Gediminas,
please check the follwing link:
http://help.sap.com/saphelp_nw70/helpdata/en/43/1c3d0f31b70701e10000000a422035/frameset.htm
Please search in this forum as well for characterist relationships. You will find useful information about this topic.
Regards Matthias Nutt
SAP Consulting Switzerland

Wrong data posting in the infocube

Similar Messages

Maybe you are looking for