Wrong datasources on DEV after client copy

Hi all,
a customer just made a cliente copy from PRD to DEV and now all data sources on DEV are pointing to PRD
and it says that source system doesn't exist.
1) What was the right way to do the copy so the datasources are still pointing to R/3 DEV (or QAS) after the client copy?.
2) Is there any easy way to correct the situation without creating all transformations again ?
Thanks in advance
JP

Hi,
Ok.
Then you can do same changes at bw dev server.
You need to change table - RSLOGSYSMAP entries. it may have ECC prod name.
Remove ecc prod server name, enter ecc dev server name and save it.
Or ask basis team to maintain ecc dev server and bw dev server technical names entries at table RSLOGSYSMAP at bw server.
You can maintain from below option as well.
BW dev server t code - RSA1, Menu Tools--> Conversion of logical system names. on next screen you can change and save entries.
Source - maintain ecc dev technical name
Target - BW Dev server technical name
Thanks

Similar Messages

Unable to find product categories after client copy

Hi all,
We have copied clients from an existing ones for both SRM and ECC. After client copy we have followed standard procedure after client copy i.e.
Run transcation BDLS
created new RFC connections
changed attributes using the Attributes replace report
created new distributon model
maintained CRM parameters
maintained new site attributes in SMOEAC transaction
maintained entries in table TWPURLSVR
however , when i try to create a shopping cart, I cannot see any product category. The extended attributes for product category point to new ECC client becuse we have run the attributes replace report.
however in the product category table , COMM_CATEGORY , the product categories listed are all for the old ECC client
When i tried to load the Object DNL_CUST_PROD1 using transaction R3AS in SRM and tried to pull from new ECC client , it is in runing status for a long time and new categories with new ECC backend reference are not being replicated in the SRM.
Can you tell me why this could be happening ? How can i get the product categories from new ECC backend into my client?
Regards,
Mangesh

problem solved
i was using wrong parameters in BDLS

AFAB: Runtime Error after client copy.

Hi all,
I'm having a problem with the transaction code AFAB (post client copy). After client copy from PRD to DEV, I'm encountering this runtime error "SAPSQL_ARRAY_INSERT_DUPREC - The ABAP/4 Open SQL array insert results in duplicate database records." whenever I tried to perform AFAB. Test run was executed successfully but I cannot complete the actual background processing.
I have try with other asset (in the same client) and encounter the same problem. Likewise, I have successfully completed the depre. if I try the same and other asset (in a different client on the same server).
I've check the number range in FBN1 and have verified that the range is correct.
Any advice as to how I can solve this problem?
Thank you.
Regards.
p/s: if there is duplication, how do I find where the duplication is located and how do I remove this duplication?
p/s 2: the standard SQL that is having this problem is "INSERT COBK FROM TABLE COBK_INS."
Edited by: Sek Yao Ooi on Aug 5, 2010 5:21 AM

Solution obtain from snote-83731 ; thanks to SAP-Marketplace's support.
Issue solved.

SAP* not authorized after Client copy

Dear All,
Here's the scenario:
1. Created a new logical system for a new Quality client 230.
2. Created the new client 220
3. scheduled a test remote client copy from the new client, source Production. (Successful)
4. Scheduled the actual client copy to run last night.
5. Today morning, I'm logging into the new client with SAP*, it prompted me to change password.
6. I want to look for the client copy logs (SCC3), but getting "not authorized"
7. Checked all other transactions, all giving "not authorized" error
Any help would be appreciated. Thanks in advance.

Dear Reza,
Better to go for Client Export Import process . This is what SAP reccomends for coping clients between
different systems ( Like from Production to Quality ) as the remote client copy has many
disadvantages..
For this 1 ) you should get the downtime of production system and do the client export process .
SCC8 . See the logs at scc3 .
2) Copy the datafile and cofile to the Source system
3) Import it usting stms_import .
Monitor the logs as the logs will be grown massive and make sure enough space is there.
4) After client copy , go for post processing ( scc7 ) .
Hope you are clear and feel free to get back if any doubts.
Regards,
Nibu

TCURM in target client empty after Client Copy

Hi Experts,
Has anyone encountered situation whereby TCURM does not contain a record for the target client after Client Copy process is completed? Is this a feature or bug?
Regards

Hi , I user the exclude tables option to exclude some tables.
but I have another problem: the client copy still failed. I get these informations:
table/object   component                         error
ANLU           FI-AA-AA                   Field missing locally
C905            SD-MD-CM                Different Field Names
IMPTT          PM-EQM-SF-MPC      Field missing locally
how can i finish my client copy ?   can you give me the solution
thanks very much

Change Myself system in RSA1 trx after client copy

Hi,
I have installed SCM 2007 system.
As post-processing step i have configured myself system in RSA1 trx in the 001 client.
Now, i want to perform client copy and use that new client 100 as Prod client. What are the steps required to change myself system to point to the new client?
Please help.
Regards,
Chintan

HI,
As logical systems are used to define you can use BDLS to convert them after client copy.
Go through :Note 325470,325525.
Thanks.

BI-RFC problems after client copy

Hi all
Client copy was done and after that when I tried to load data in BW, it ran for long time and finally showed cancelled in SM37. When I checked the source system in RSA1, it gave two messages.
1.Incorrect IDoc type ZSAC008 in the ALE definition of the source system RSAR373
2.Result of the destination check: Password logon no longer possible - too many failed attempts RSAR375.
In long text of message 1 suggestion was to enter IDoc type ZSAB003. In SM30 for Message Type RSSEND Basic Type ZSAB003 Release field is empty. Is this error because of this? After client copy is there a way to restore the settings back to how it was set initially in the development server? Basis told ALEREMOTE & BIWREMOTE are not blocked. What is missing here? Thanks a lot in advance.
Subin

There are a few things need to be performed on basis side after copy .
1. Restore of Logical system.--> check with Baisis team wheather they have performed this action or not after copy.
2. Check your source system connection, in rs1-- source sytem --check
3. Change the aleremote or Bwremote passwords.
4. Try to logon to your sourcesystem ( from SM59 Tcode) Remote logon.
Hope this helps.
Regards,
Reddy
Edited by: Reddybl on Apr 1, 2010 11:56 AM

After Client copy - No Authroization Issue

Dear All,
Good Day,
We copied Production data to Quality system through Transport management System. We checked those data copied successfully. After client copy, login in Quality also done successfully
But unable to run any transaction. no authroization error occur for all the transaction for all the user id.
"You are not authorized to use transaction XXXX"
Kindly advice me to resolved this issue.
Best Regards,
KSK

Was security transported down? Can you log into the system as SAP*? If so, check to make sure that all the roles and user masters where copied. You can also run st01 to do an authorization check.

Background jobs pointing to old client after client copy

Hello
We have recently completed system refresh from PROD system to TEST system.
We have created new client in new TEST system. Background jobs are copied properly from old client to new client.
But all these jobs are pointing to old client only. We have deleted old client.
Hence all these jobs get cancelled.
How shall I change the client of all the jobs from old to new one.
-Nandu More

Please check the thread:
Error in Background Jobs After Client Copy
Check some of the TBT* tables.

PI 7.0 ABAP Proxy Wrong Namespace after Client copy

Hello,
i am looking for an PI expert because we have some problems with a standard ABAP proxy interface.
We use the FSCM Module and we send Credit Commitment Notification from a SAP ECC 6.0 to PI 7.0.
We use the Interface CreditCommitmentNotification_Out and it works fine on the Development System (D46). But on the integration system (Q46) it doesn't work. The Q46 is build up from our production system (P46) by a system/client copy.
We get the error:
The payload include a wrong namespace for the proxy interface.
wrong: xmlns:prx="urn:sap.com:proxy:P46:/1SAI/TAS7DF374ECCA722B654BFE:700:2007/10/04"
correct: xmlns:prx="urn:sap.com:proxy:Q46:/1SAI/TAS7DF374ECCA722B654BFE:700:2007/10/04"
I dont know why we get the wrong namespace. I check the transaction SICF, SPROXY and SXMB_ADM and compare it with the customizing on our development system. I didnt find any gap.
Please help me if you have some ideas what is wrong on our system.
Regards
Jürgen 8-))

Hi,
We experience the same problem after an upgrade from ECC 5.0 to 6.0
How did you solve this?
Ron

Replicating Product groups after client copy WRONG

Hi Folks,
I've taken a client copy from client 100 to 050 in both SRM SD1CLNT100 and ECC ED1CLNT100.
I've done BDLS to replace log. sys. in both systems for both SRM and ECC log sys. eg. ED1CLNT100 to 050 and SD1CLNT100 to 050.
After replication of config and product groups I'm stuck with the product groups replicateded in CLNT100.
I get the root node after replication of product groups in the new 050 client but all the product groups are not copied!
Any ideas to what I'm doing wrong?
Thanks in advance,
Thomas

HI Thomas
Can you pls go through following replies ---
1 how to delete Product Category ?
2 Re: Updating Product Categories
3 Deletion of Product master on Production Client
Run transaction BDLS to convert logical system from old ID to new logical system ID. The logical system ID now would be PR3CLNT700
regards,
Nimish Sheth

SWN_SELSEN not working in test client after client-copy

Hi all,
We are using extended notification without problem until test client was refreshed by client-copy from production client. In test client, report SWN_SELSEN did not generated notification even there are newly generated workflow items. Because of client-copy, I found that tables SWN_NOTIF, SWN_NOTIFTSTMP, SWN_SENDLOG, SWN_TIMESTAMPS are all empty in test client.
Please advise how to make report SWN_SELSEN back to work in test client. Thanks.
<< Additional information >>
(1) Run report SWN_SELSEN_TEST with test Case 5 - Simulate Send Only. After this, some entries were written to above tables. But test on new workflow item, the schedule report SWN_SELSEN still fail to trigger notification.
(2) Run report SWN_SELSEN_TEST with test Case 4 - Send One Message Only. It triggered notifications for all active workflow items and sent out several hundred emails including workflow item created in step 1. However, further test on new workflowitem, the schedule report SWN_SELSEN is still unable to trigger notification.
I think there may be something else missing, like the timestamp of delta. Please help.
Regards,
Donald

Hello,
I've experienced a few cases where stopping SWN_SELSEN and then restarting it helped to fill up SWN_TIMESTAMPS with proper values. How does that table look after you run it?
What is SWN_SELSEN_TEST?
Chck in SLG1 to get an idea of why it's not working. You can also run SWN_SELSEN in the foreground and debug it to see exactly where and why it goes wrong. Also check ST22.
regards
Rick Bakker
hanabi technology

After Client copy several tables were cleared.

Good night!
After making a client copy 400 to the client 250 in my environment of DEV Netwaver ECC 6.0 Oracle 10.2.0.2 several tables were cleared.
Example:
4 ETA346 "CABN             :""       0        0        0 DEL.""       0        0   16:45:01"
Is there any way to transfer the data tables of the environment of QAS for the tables of environmental DEV that were cleared?
Someone could tell me why the tables were cleared?
Is there any way to restore the environment of DEV?
Thank
Pamplona
log:
1 ETA028XClient copy from "12.08.2008" "15:25:32"
1 ETA029 System ID............................ "DEV"
1 ETA043 Target client........................ "250"
1 ETA030 R/3 Release.......................... "700"
1 ETA354   Basis Support Package..............."SAPKB70014"
1 ETA031 Host................................. "srvdevnw"
1 ETA000 Start in background............. ....."X"
1 ETA032 User................................. "SAP*"
1 ETA033 Parameter
1 ETA034 Source client........................ "400"
1 ETA188 Source client user masters............"400"
1 ETA185 Copier profile:......................."SAP_UCSV"
1 ETA036 Table selection
1 ETA177 Customizing data ....................."X"
1 ETA037 With application data................ " "
1 ETA155 Initialize and recreate......... "X"
2 ETA367XStart analysis of system "15:25:32"
3 ETA108 "/GC1/CC_EXIT_CLIENT_DELETION" executed "        0"("        0") entries copied
4 ETA114 Runtime "             0" seconds
3 ETA072 Exit program "/GC1/CC_EXIT_CLIENT_DELETION" successfully executed "15:25:54"
A3 E/SAPCND/CUST_T 010 Start of exit "/SAPCND/CC_COND_TABLE_MATCH"
A4 E/SAPCND/CUST_T 011 Exit "/SAPCND/CC_COND_TABLE_MATCH" is not executed in case MODUS = "C"
3 ETA108 "/SAPCND/CC_COND_TABLE_MATCH" executed "        0"("        0") entries copied
4 ETA114 Runtime "             0" seconds
3 ETA072 Exit program "/SAPCND/CC_COND_TABLE_MATCH" successfully executed "15:25:55"
A3 E/SAPCND/CUST_T 007XRemote Client Copy/ Client Export exit called in source system -> Return
3 ETA108 "/SAPCND/CC_GROUP_WS_AA" executed "        0"("        0") entries copied
4 ETA114 Runtime "             0" seconds
3 ETA072 Exit program "/SAPCND/CC_GROUP_WS_AA" successfully executed "15:25:55"
A3 E/SAPCND/CUST_T 010 Start of exit "/SAPCND/CC_INCLUDE_TABLES"
A4 E/SAPCND/CUST_T 008 Condition Table "/1CN/CPNSAP00001" is not relevant for appl (= application data) = " "
A4 E/SAPCND/CUST_T 008 Condition Table "/1CN/CPASAP00001" is not relevant for appl (= application data) = " "
A4 E/SAPCND/CUST_T 008 Condition Table "/1CN/CPTSAP00001" is not relevant for appl (= application data) = " "
A4 E/SAPCND/CUST_T 008 Condition Table "/1CN/CPTSAP00004" is not relevant for appl (= application data) = " "
A4 E/SAPCND/CUST_T 008 Condition Table "/1CN/CPTSAP00005" is not relevant for appl (= application data) = " "
A4 E/SAPCND/CUST_T 008 Condition Table "/1CN/CPTSAP00006" is not relevant for appl (= application data) = " "
A4 E/SAPCND/CUST_T 008 Condition Table "/1CN/CRMSAP_CARR" is not relevant for appl (= application data) = " "
A4 E/SAPCND/CUST_T 008 Condition Table "/1CN/CRMSAP_CONN" is not relevant for appl (= application data) = " "
A4 E/SAPCND/CUST_T 008 Condition Table "/1CN/CRMSAP_PART" is not relevant for appl (= application data) = " "
A4 E/SAPCND/CUST_T 008 Condition Table "/1CN/CTXSAPRIN03" is not relevant for appl (= application data) = " "
A4 E/SAPCND/CUST_T 008 Condition Table "/1CN/CTXSAPRIN04" is not relevant for appl (= application data) = " "
A4 E/SAPCND/CUST_T 008 Condition Table "/1CN/CTXSAPRIN07" is not relevant for appl (= application data) = " "
A4 E/SAPCND/CUST_T 008 Condition Table "/1CN/CTXSAPX0101" is not relevant for appl (= application data) = " "
A4 E/SAPCND/CUST_T 008 Condition Table "/1CN/CTXSAPX0103" is not relevant for appl (= application data) = " "
A3 E/SAPCND/CUST_T 013 End of exit "/SAPCND/CC_INCLUDE_TABLES"
3 ETA108 "/SAPCND/CC_INCLUDE_TABLES" executed "       98"("        0") entries copied
4 ETA114 Runtime "             2" seconds
3 ETA072 Exit program "/SAPCND/CC_INCLUDE_TABLES" successfully executed "15:25:57"
3 ETA108 "ADDR_CLIENTCOPY_SELECT_TABLES" executed "       26"("        0") entries copied
4 ETA114 Runtime "             0" seconds
3 ETA072 Exit program "ADDR_CLIENTCOPY_SELECT_TABLES" successfully executed "15:26:00"
3 ETA108 "EFG_FORM_CC_EXIT_BEFORE" executed "        0"("        0") entries copied
4 ETA114 Runtime "             1" seconds
3 ETA072 Exit program "EFG_FORM_CC_EXIT_BEFORE" successfully executed "15:26:03"
A3 EFINB_TR 070XStart of deletion methods for client "250"
A4 EFINB_TR 061 Start the deletion method for object "FINB-TR-DERIVATION"
A4 EFINB_TR 062 End of deletion method of object "FINB-TR-DERIVATION"
A4 EFINB_TR 061 Start the deletion method for object "UCM003"
A4 EFINB_TR 062 End of deletion method of object "UCM003"
A4 EFINB_TR 061 Start the deletion method for object "/EACC/ARCHIVING"
A4 EFINB_TR 062 End of deletion method of object "/EACC/ARCHIVING"
A4 EFINB_TR 061 Start the deletion method for object "/EACC/JOURNALCC"
A4 EFINB_TR 062 End of deletion method of object "/EACC/JOURNALCC"
A4 EFINB_TR 061 Start the deletion method for object "/EACC/DERIVATION-1"
A4 EFINB_TR 062 End of deletion method of object "/EACC/DERIVATION-1"
A4 EFINB_TR 061 Start the deletion method for object "FINB-PERSIST"
A4 EFINB_TR 062 End of deletion method of object "FINB-PERSIST"
A4 EFINB_TR 061 Start the deletion method for object "FINB_GENERATOR"
A4 EFINB_GN 044 Deletion log for client "250", application "10"
A4 EFINB_SBU 001 Buffer "FINB_S_SBU_BUFFER_HASH_KEY", area "GN" deleted on server "srvdevnw"
A4 EFINB_GN 040 "0" objects registered for deletion
A4 EFINB_GN 041 "0" objects deleted
A4 EFINB_GN 044 Deletion log for client "250", application "EA"
A4 EFINB_SBU 001 Buffer "FINB_S_SBU_BUFFER_HASH_KEY", area "GN" deleted on server "srvdevnw"
A4 EFINB_GN 040 "0" objects registered for deletion
A4 EFINB_GN 041 "0" objects deleted
A4 EFINB_GN 044 Deletion log for client "250", application "UG"
A4 EFINB_SBU 001 Buffer "FINB_S_SBU_BUFFER_HASH_KEY", area "GN" deleted on server "srvdevnw"
A4 EFINB_GN 040 "0" objects registered for deletion
A4 EFINB_GN 041 "0" objects deleted
A4 EFINB_TR 062 End of deletion method of object "FINB_GENERATOR"
A4 EFINB_TR 061 Start the deletion method for object "FINB_SBU_DUMMY"
A4 EFINB_SBU 001 Buffer "FINB_S_SBU_BUFFER_HASH_KEY", area "AS" deleted on server "srvdevnw"
A4 EFINB_SBU 001 Buffer "FINB_S_SBU_BUFFER_HASH_KEY", area "XP" deleted on server "srvdevnw"
A4 EFINB_SBU 001 Buffer "FINB_S_KF_CHARS_BUFFER_KEY", area "HA" deleted on server "srvdevnw"
A4 EFINB_SBU 001 Buffer "FINB_S_SBU_BUFFER_HASH_KEY", area "GN" deleted on server "srvdevnw"
A4 EFINB_TR 062 End of deletion method of object "FINB_SBU_DUMMY"
3 ETA338 Table "KX9RABA0000108" is deleted, not copied
3 ETA338 Table "TABADRH" is deleted, not copied
3 ETA338 Table "TABADRS" is deleted, not copied
3 ETA338 Table "TABADRSF" is deleted, not copied
3 ETA338 Table "TABADRST" is deleted, not copied
3 ETA338 Table "UCF001C" is deleted, not copied
4 ETA346 "CABAREF          :""       0        0        0 DEL.""       0        0   16:45:01"
+4 ETA346 "CABN             :""       0        0        0 DEL.""       0        0   16:45:01"+
4 ETA346 "CABNNEW          :""       0        0        0 DEL.""       0        0   16:45:01"
4 ETA346 "CABNT            :""       0        0        0 DEL.""       0        0   16:45:01"
4 ETA346 "CABNZ            :""       0        0        0 DEL.""       0        1   16:45:02"
4 ETA346 "CABN_EXCL        :""       0        0        0 DEL.""       0        0   16:45:02"
4 ETA346 "CABS             :""       0        0        0 DEL.""       0        0   16:45:02"
4 ETA346 "CACCEL           :""       0        0        0 COPY""       0        0   16:45:02"
4 ETA346 "CACNSC_AREA      :""       0        0        0 COPY""       0        0   16:45:02"
3 ESO672 "Number of new SAPoffice users 451"
3 ESO672 "Number of users marked as deleted 0"
3 ESO672 "Records deleted in SOUD: 0"
3 ESO672 "Records deleted in SOUC: 0"
3 ESO672 "Records changed in SOUC: 0"
3 ESO672 "New records in SOUC: 0"
3 ESO672 "User without address assignment 0"
3 ESO672 "User - SO_KEY generated 0"
3 ESO672 "User - SO_KEY not generated 0"
3 ESO672 "User w/o entry in table USRADR 0"
3 ESO672 "User with address assignment 452"
3 ESO672 "User w/o entry in USR21 0"
3 ESO672 "User with person group <> BC01 0"
3 ESO672 "User with invalid address 0"
3 ESO672 "User with default ADCP-SO_KEY 0"
3 ESO672 "User - SO_KEY generated subsequently 0"
3 ESO672 "User - SO_KEY updated 0"
3 ESO672 "User - address not changed 452"
3 ESO672 "User w/o where-used list 0"
4 ETA114 Runtime "            37" seconds
3 ETA072 Exit program "RSSOUSCO_FOR_CC" successfully executed "17:52:21"
4 ETA114 Runtime "            58" seconds
3 ETA072 Exit program "SFW_ADD_SWITCH_STATES" successfully executed "17:53:23"
4 ETA114 Runtime "             0" seconds
3 ETA072 Exit program "SXMB_CC_IS_CHECK" successfully executed "17:53:23"
3 ETA072 Exit program "USERBUF_RESET" successfully executed "17:53:23"
2 ETA347 Warning: Source client has logical system, target client does not
1 ETA357 Selected tables           : "        56.790"
1 ETA298 Copied data in kBytes : "    12.497.003"
1 ETA299 Deleted data in kBytes : "             3"
1 ETA151 Program ran successfully
1 ETA027 Runtime (seconds)         : "         8.872"
1 ETA152 End of processing: "17:53:23"
Thank
Pamplona

Sorry Anil,
I will explain better.
I had an HSC environment of the PRD for the environment of DEV
My environment of the PRD has only 400 client
In the environment of DEV I need to 2 client's (250 and 400)
I made a copy of the client DEV 400 for 250 DEV using profile:"SAP_UCSV"
Thank´s
Pamplona

Error FDBL020 after client copy

Hello Friends !
After a client copy i having a problem in DEV that do not allowed archiving :
in transaction FS10N, when i am trying do execute appear the error: No data read for fiscal year 2006 (error FDBL020), i tried applying the note 302263 (deleting the attributes of programs)but the attributes has been deleted. Anybody know a solution ?
This problem not occur in QAS.
Thank´s a lot..
Claudenir

hi...
send the full details of ur client copy....
what is ur target client where u did this client copy .. i mean in prod dev

Error After client copy

Hi all,
I did a client copy in ECC IDES with client 800 as source client.As per the logs , copy is successful.The profile usedf is SAP_ALL.After the copy we logged into the new client which was
created and it looked good. Checked the Logs in SCC3 and it said that client copy was finished sucessfully.However now when we go and execute transactions MM01 and VA01, it is giving a error saying
Batch definition level not found.System inconsistency!
Not sure what went wrong, Any suggestions would be Helpful.
Regards,
Chaitanya.

hi...
send the full details of ur client copy....
what is ur target client where u did this client copy .. i mean in prod dev

Wrong datasources on DEV after client copy

Similar Messages

Maybe you are looking for