Wrong description for exit variable

Hi,
I have a problem with descriptions of variables created on 0FISCPER. I created two exit variables 'Z1' and 'Z2' and the related Function module that reading a custom table (I read the last closed period) build a range. For the first variable the range is 001.2006 to the last closed period. For the second variable the range is from (last closed period + 1) to 012.2006.
The manual layout (dynamic for 0FISCPER) shows for the columns related with the first variable the description of the first period (January), for the other acts the same (May - the first value of second variable)
Values from infocube are selected correctly so the problem seems to be specific of texts.
Thank you in advance,
Andrea

Hi Eugene,
thank you very much for your reply. The problem I described arise in BW-BPS trying to build a planning layout with actual and plan periods. So I have two variables on 0FISCPER. In the related Function Modules I select the last closed period from a custom table building two ranges : from 001.2006 to the last closed period for the first variable (actual data) and from (last closed period + 1) to 012.2006 for the second.
Data selection from infocube works correctly, but columns texts are wrong.
ES:
Jan 2006 Jan 2006 Jan 2006 Apr 2006 Apr 2006 .....
Actual Actual Actual Plan Plan
Thank you,
Andrea

Similar Messages

Wrong text description for exit variable

Hi,
I have a problem with descriptions of variables created on 0FISCPER. I created two exit variables 'Z1' and 'Z2' and the related Function module that reading a custom table (I read the last closed period) build a range. For the first variable the range is 001.2006 to the last closed period. For the second variable the range is from (last closed period + 1) to 012.2006.
The manual layout (dynamic for 0FISCPER) shows for the columns related with the first variable the description of the first period (January), for the other acts the same (May - the first value of second variable)
Values from infocube are selected correctly so the problem seems to be specific of texts.
Thank you in advance,
Andrea

Hi Andrea,
first check if fiscal year variant is restricted to a single value. Then look into the customizing for the FYV. It's possible to maintain texts for periods there, so check if those are correct.
If it still does not work, open a message to SAP support.
Regards,
Marc
SAP NetWeaver RIG

Text for Exit Variable Values

Hi
We are populating the variable with the exit function module and I am using this variable as an user restriction of values. When my user opens the input box to select the values of this variable, there not able to see the attributes that are there for that characteristic as well as description of the master data values. The only thing that they are seeing is the key values that are populated by the exit. Can you please let me know what is the reason for this behavior and we are using web excel interface and using BW 3.5 version
Thanks,
Raj.

Hi Guys
I have solved this. I had to select the Planning level in the variable component to populate the text in the variable of type exit.
Thanks,
Raj.

Wrong Description in the sales Deal

Hi Gurus,
when VB23 executed after sales deal is created using VB21, we are getting wrong description for region at the customer level . On debugging we found that the standard program is passing only zone value into the table whereas it should also pass VKORG and KDGRP. this is happenig through the
standard include MV13AKOM which has a functional module SG_TEXT_OF_FIELD. Through this function module the region value is passed.
We found that user exit does not exists for the above transaction VB23.
Please suggest how to do changes in std program and whether it is advisable.
Thanks & Regards,
Vijaya.

closed

Offset on exit variables on 0FISCPER?

Hi,
We are having an IP environment here. A copy function is supposed to roll forward values from one period to the next. Originally I had developed an exit variable pointing to the target period, and I have set up the copy like that:
From: Target Period -1
To: Target Period
Now it seems IP cannot cope with this. If I develop a separate variable for the source period and do like that it works:
From: Source Period
To: Target Period
How can that be? Can I not use an offset for exit variables (type exit, single value, mandatory, no user input allowed), coding in step 1 of the include?
Many thanks,
Andreas

Hi Andreas,
Why does it seem to you that you cannot use offset in IP? Did you get any error messages - if you did, please post the details. I think you should be able to use offsets to variables, just make sure the variable is created on a standard time characteristic like 0calmonth and is of type 'single value'.

Problem with User exit variable

We're using an user exit variable (var2) for YTD calculation (For getting the first month of current year). It gets value from another exit variable (var1) which has by default value last month of current year(populated in I_step1 from sy-datum). If the user wants he can change the default value of var1. It works fine when the query is executed the first time. But if the user calls the variable screen again, the variable screen does not show var1 in the popup and the user gets an error message that no value could be determined for var2. How can this issue be resolved or is there any other method to satisfy this requirement.
Your help would be appreciated and rewarded.
Thanks & Regards
Hari

Hi Ravi,
Sorry, there's a correction. var2 is used for getting the first month of the year selected by the user in var1. If the user doesn't enter a value for var1, then var2 should take first month of current year from var1 which has by default last month of current year (populated in i_step1 from sy-datum). The user can select the value of var1 according to his requirement. Then var 2 should get first month of the year selected. That's why I'm using two exit variables.
It works fine during the initial run of the query. But when the user clicks on the variable button in the toolbar and executes the query, var1 is not being displayed and an error message No value could be determined for var2 is shown. All other variables used in the query are displayed except var1.
Krzys, Is the option Can be changed in Query Navigation available for Exit variables. I'll check that and get back to you.
Boujema, Thanks for the OSS note.
Thanks
Hari

Description for Formula Values in Structure

Hello All,
I want to change the description of the formula values in my Structure (i want to add the Month that is used in the formula to the description so that the description becomes more dynamic). Can any one of you please suggest a way. This is required quickly so please respond ASAP and ALSO LET ME KNOW HOW TO REWARD POINTS I WILL DO IT AS SOON AS I GET MY ANSWER.
Thanks,

Hi,
To use a text variable on 0CALMONTH, 0CALMONTH need not be in Fomula as you mentioned.
as you said,you have variable on 0CALMONTH and you wanted to see entered 0CALMONTH value in formulas.Right?
From the context menu of formula>Edit->click on 'Select text variables'->a window will pop up which shows all existing text variables->(you can use any existing text variable of 0CALMANTH,ok..for time being we will go with new text variable) go to starting point of the text variables window>double cilck on "New" node->provide Tech name and description for text variables and select 'processing by' as 'Replacement path'->next->select Characterstic ' 0CALMONTH'->next->select 'replace variable' with "KEY" or "TEXT">next>Finish.
Use this Text variable in your formulas.
Pl dont foget to assign points if it helps.
Thanks

Error in the ABAP Code for Customer Exit Variable

Could you please update me what is the wrong with the below ABAP Code developed for Customer Exit Variable in BW
i created a Variable (ZVWKNO) of Customer Exit,Single Value ,Mandatory and Variable is ready for input
In CMOD i had written the below Code:
When 'ZVWKNO'.
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
But when i execute the query the default value is not populated with Week-1 No in the variable screen
Please update me what went wrong
Thanks

Case ZVWKNO.                "write this with out comments
When '1'.              "write the value that needs to equal with value in varaible ZVWKNO after when in sungle quotes
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.                                    "check this Week Minimum is '01' and Maximum '52'
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
Prabhudas

Cannot determine a value for an exit variable in the Formula fn w/p empty

Hi All,
We have an exit variable Z_EX_AR_VAR, the would read a hierarchy node input variable (Z_HN_AREA), which is furthur based on a hierarchy input variable (Z_HR_AREA), and wouuld return the first leaf of it.
We have implemented a input ready query based on this exit variable and it is getting the first node and is input ready and saves the data to the database.
It works well in the query when we have filtered the characteristic with the hier and hier node and the exit variables.
We need to use the same value to be used in the Fox function.
As per the requirement, the Fox function has to process the zero (empty) records.
So, we have customized formula function to process emptry records.
And in the function of type formula function that processes empty records, we have used the following statement.
DATA AR type ZAREA.
AR = VARI ( Z_HN_AREA, HIENM=Z_HR_AREA, 1).
We are getting the following error message:
Cannot determine a value for the variable Z_HN_AREA.
Planning function ended with errors.
What is that we are doing wrong here. Is it with the 'Process Empty Records' function that cannot read the variable.
How come this variable is working in the query and it is not working in the FOX.
We have done the variable to variable binding in the WAD also. Still the same problem.
Any ideas? Thanks in advance.
Best Regards,
- Shashi
Thanks in '

Hi All,
Michael Wolf from SAP confirmed that we cannot use VARiable read functions in the customized Formula function that processes the zero (empty records) as he spoke to SAP AG about the issue.
Hence we have made a work around by creating a valid record using a dummy key figure in the Custom Formula function that processes empty records so that in the next step, the regular Formula function would get executed, where we could access the variable values by using VARV, VARI functions.
Thanks,
- Shashi

Customer Exit Variable in formula to get values for multiple keyfigures

Hi to all,
I have query as defined in following scenario:
CHAR_X     C_KF1 (based on KF1)     C_KF2 (based on KF2)     u2026     C_KFn (based on KFn)
Value1
Value2
u2026
Valuem
C_KF = calculated key figure
I need to create a customer exit variable that will search through selection e.g. CHAR_X/KF1 and give some result. I need this variable for every keyfigure (KF1-KFn). Using customer exit variable is the only solution.
My question is: do I have to create formula variable (customer exit) representing every keyfigure separately (VAR1 u2013 VARn, like in below example)?
CHAR_X     C_KF1 (using VAR1)     C_KF2 (using VAR2)     u2026     C_KFn (using VARn)
Value1
Value2
u2026
Valuem
Or is it possible to create one general formula variable since the way to retrieve the value in variable is always the same (like in below example)? In this case, how do I pass the value of the respective keyfigure to this variable?
CHAR_X     C_KF1 (using VAR_X)     C_KF2 (using VAR_X)     u2026     C_KFn (using VAR_X)
Value1
Value2
u2026
Valuem
Thanks for your replies, points will be awarded!
Cheers

That is my concern, the value of variable is not the same.
What variable should do is:
take KF1 id, go through values for CHAR_X, get back one value
This value would always be different, and also "KF" part in code of variable should be different, based on the column where the variable is being used (so, in column C_KF1 ,variable should "pick up" id of KF1, etc.).
I hope it makes it more clear. For now, I do not have the code for variable yet, I am just interested in concept whether it is possible to pass the ID of keyfigure dynamically so I can make decision how to model this request.
Thanks

Value for user-exit variable is invalid

Hi Gurus,
My Value for a Fiscal Year Prd returns a invalid value for the 12th month of each year( for Example 12/2004, returns the error "Value 200313 for User-exit variable is invalid.
This is the code that is being used.
*Rolling 12 months for entered month
when 'ZCALM12'.
 clear: v_mth, v_yr.
 REFRESH E_T_RANGE.
 CLEAR L_S_RANGE.
 LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
 WHERE VNAM = 'ZCALMON'.
 exit.
 endloop.
 v_yr = LOC_VAR_RANGE-LOW+0(4) - 1.
 v_mth = LOC_VAR_RANGE-LOW+4(2) + 1.
 L_S_RANGE-SIGN = 'I'.
 L_S_RANGE-OPT = 'BT'.
 concatenate v_yr v_mth into L_S_RANGE-LOW.
 L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
 APPEND L_S_RANGE TO E_T_RANGE.
Thanks in Advance.

Hi Ravi,
when 'ZCALM12'.
clear: v_mth, v_yr.
REFRESH E_T_RANGE.
CLEAR L_S_RANGE.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZCALMON'.
exit.
endloop.
-->> Here, you are not checking any thing. On which logic you are reducing year by one and increasing month by 1..?
v_yr = LOC_VAR_RANGE-LOW+0(4) - 1.
v_mth = LOC_VAR_RANGE-LOW+4(2) + 1.
-->>IF month is 200512 you will get output from above code is : please check.
v_yr = 2005 - 1 = 2004
v_mth = 12 +1 = 13.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
concatenate v_yr v_mth into L_S_RANGE-LOW.
L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
APPEND L_S_RANGE TO E_T_RANGE.
Try to debug the code by keeping break point after When. and execute the report, you will be debugging mode.
Hope it Helps
Srini

Error Message : " No value could be determined for Customer Exit Variable "

Hello BI Experts ,
I have created a "ZYTD_PERIOD" Customer Exit Variable Interval Mandatory and ready for input check mark removed.
The reference character is '0FISCPER' .
I want to have YTD figures when the user enter single Fiscal Year Period for variable 0P_FPER.
So I have written below code in SE37 : EXIT_SAPLRRS0_001 and include program : ZXRSRU01
==================================================================
case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
===================================================================
After that I use this 'ZYTD_PERIOD' variable in the query .
Also I have used the variable 0P_FPER in another structure.
When I execute the query by entering the value of 0P_FPER as 010.2009 or any other value ,
I am getting below error message ,
*No value could be determined for variable ZYTDPERIOD*_
Below is details of this Error message ,
Note that I have proper Master and Text data for 0CO_AREA and 0COMP_CODE loaded into BI.
=======================================================================
Diagnosis
This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
Termination message BRAIN 632 appears:
Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
System Response
1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.
2. Cause of Error
The attributes for the controlling area (InfoObject 0CO_AREA) or company code (InfoObject 0COMP_CODE) were not loaded into the BW system, or the attributes for the controlling area are not active in the BW system.
Check whether this is the cause of the error in your BW system. Display the contents of table /bi0/mco_area or /bi0/mcomp_code using transaction se16.
Application CO:
Check whether the attributes 'fiscal year variant' (field FISCVARNT) and 'profit center local currency currency type' (field CURTP_PCA) are filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant in the OBJVERS = 'A' is empty, then the error is with variable 0P_FVAEX. If the currency type of the profit center's local currency in OBJVERS = 'A' is empty, then the error is with variable 0P_CTPCA.
Application FI:
Check whether or not the attribute 'fiscal year variant' (field FISCVARNT) is filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant is empty in OBJVERS= 'A', then the error is with variable 0P_FVAEX.
Procedure
Using InfoSource 0CO_AREA, load the attributes for the controlling area or company code into your BW system.
Afterwards, activate the attribute changes in your BW system. To do this, use transaction rsa1, path 'Tools > Hierarchy/Attribute changes', functions button 'InfoObject list'. Choose InfoObject 0CO_AREA or 0COMP_CODE from this list, and activate the attribute changes.
=====================================================================================
Is there any special settings needed before writing BEx Customer Exit ?
I have already created a project in CMOD and assinged a proper RSR00001
and EXIT_SAPLRRS0_001 and project is active.
Any help please ....
Regards ,
Amol

My Code is as below ,
          case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
              ENDCASE.

Defining an exit variable for a specific day based on Fiscal Period

If I do not have Calendar Day time dimension available for reporting is it possible to define a customer exit variable for a specific day. The days are the first and last day of the financial year?
Example
User Input for Fiscal Period: 2009004
The exit is to define a value for 01.01.2009 and 31.12.2008 (end of last year)
Thanks

Hello Niten,
yes it is possible. Procedure:
- add a new column in the report structure
- hide this column
- create a new text variable in this column (for customer exit)
- now you can fill this variable during query execution based on 0FISCPER
You don't want to filter by this variable. Right?
Buy,
André

How to get the current month value for a customer exit variable?

How to get the current month value for a customer exit variable?
And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
Thanks!

Hi Kevin,
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
Regards,
Vijay.

Looking for an ABAP-code for the customer-Exit Variable

Hello,
I have defined a Variable (Interval) which should be processed through Customer-Exit on characteristic Supplier-Date (date format). This Customer-Exit Variable is called ZDATE.
We have another time characteristic Fiscal year / period (0FISCPER) which has single mandatory input variable for ex. 003.2011. This input variable is called ZFISCPER.
Now I have to write an ABAP-Code where the customer exit variable ZDATE is derived (fiscal last year to last period) from input variable ZFISCPER in INCLUDE ZXRSRU01.
Means when the input variable (ZFISCPER) is 003.2011 then the customer exit variable ZDATE should be calculated in INCLUDE ZXRSRU01 as 01.01.2010 u2013 28.02.2011 (fiscal last year to last period).
Since I am quite new in ABAP, I will be grateful if you could write me sample ABAP for this.
Many thanks.

Hi,
should be something like:
DATA: l_s_range TYPE rsr_s_rangesid,
input LIKE sy-datum.
When 'ZDATE'
CONCATENATE '0101' 0FISCPER+3(4)-1 into l_s_range-low. "You get 01012010
CONCATENATE '01' Fiscper+1(6) into input. "You get 01032011
l_s_range-high = input-1. "You get 28022011
APPEND l_s_range TO e_t_range.
Greetings
Roman

Wrong description for exit variable

Similar Messages

Maybe you are looking for