Wrong DocNum while changing Series num - version 2007
Hi,
When I open UDO form and change the series number (in SBO 2007) the DocNum replaces via to the series num, but after adding the document, it gets other DocNum from the default series. The series number does not change.
Does someone know what i should do?
Thanks,
Hi Dina,
I think this is the same issue as described in SAP note 1266379 where the DocNum is taken from the default series no matter what series you have selected to use. According to the note it is planned to be fixed in a patch for Business One - please check the info.txt note for note 1266379 to verify if the fix has been included.
Regards,
Niall
Similar Messages
-
Problem while changing decimal places in SAP B1 2007
Hi Experts,
I want change the decimal places of Quantity type fields from 2 decimal places to 4 decimal places. But while changing it in Genral settings form ,it shows the error message "Cannot update while another user is connected to the company". it is working in SAP B1 2005B but not in SAP B1 2007
Please help me if you have any solution on this issue..
Thanking you in advancePaul,
Please see SAP Note 1247060 as is discusses the fact that this did work in 2005, but the behavior was changed in version 2007 ...
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&;note_numm=0001247060
Eddy -
Error while changing PO in SRM extended classic Version 5.0
Hi Guys,
we are facing issue while changing PO in SRM , this is extended classic with version 5.0.
The system status is active() is error message and PO remains unchanged. Kindly help to resolve this issue. we have an approval for even PO if a user changes the qty in the PO then it calls the approval WF logic.
Thanks
SrujankHello Srujan,
Go through the following thread:
Re: PO status change
Hope it helps.
Thanks,
Neelima -
How to change series or line color in excel 2007 using ActiveX
I am trying to change series color using Excel 2007 with ActiveX as below. It seems the color cannot be controlled correctly. For example, if I chosse red color, my curve will be changed to blue. Any ideas?
Also, I googled and found a guy ran into similiar problem using VBA for Excel 2007. See the link below:
http://help.wugnet.com/office/change-series-line-color-excel-2007-vba-ftopict1062646.html
Set ch = Worksheets("Chart").ChartObjects(1)
Set objSeries = ch.Chart.SeriesCollection(1)
objSeries.Format.Line.ForeColor.RGB = RGB(255, 127, 0)
According to the post, it need to be done as follows
objSeries.Border.Color = RGB(255, 127, 0) . But I cannot find the border property/method in ActiveX.
The color seems to be abitrary. and I found the Xubuli,
I looked into your question and confirmed that Border.Color is not located under the Excel.Series library. Instead, you must locate it under _Worksheet.UsedRange as seen below in the figure. I am attaching the VI file where I located the the Border.Color property node, and I am also including a SubVI on the block diagram that goes into explicitly set the cell color and border. This SubVI can be found under Programming>>Report Generation>>Excel Specific>>Excel Format>>Excel Set Cell Color and Border.vi, if you have the Report Generation Toolkit installed. I hope this helps.
Larry H
Applications Engineer
National Instruments
Attachments:
CellBorder.vi 8 KB -
How to change the SOAP version from 1.0 to 1.2 while registering to ESB
Hi All,
I have problem here,
Is there any possibility to change the soap version from 1.0 to 1.2 for oracle ESB.
Because it is using SOAP1.1 while registering any service to ESB, Is there any possiblity to change it.
Hi guys is there any solution for this...........:-(
OR Will SOA suite 10.1.3.4 supports SOAP 1.2 ?
Cheers,
Kalyan.PHi,
The current version of ESB does not support SOAP 1.2. You need to make sure your message contains the correct SOAP 1.1 namespace so ESB uses the correct SOAP version:
SOAP 1.1: http://schemas.xmlsoap.org/soap/envelope/
SOAP 1.2: http://www.w3.org/2003/05/soap-envelope
For SOAP 1.2 you have to wait until 11g SOA Suite is released.
Kind Regards,
Andre Jochems -
All default routing value has to be changed, while changed the work center in production order
Dear friends,
our client they want to change the work center in production order.according to production version work center also they are changed.so while change the WC,all the default value has be changed as per routing what we maintained in routing.At present we have to enter the manually change the W.C as well as set up time and operation time enter manually.Any other option to do the automatically capture value from routing while change in Work center in production order.pl help me on this.
Thanks&Regards
Sabhapathy RHi Rahul,
Thanks for reply. I am maintained in diff value maintained routing , Ex :First routing i have work center 'X' value maintained as a setup time in 15 Min's and operation time 10 Min's
second work center 'Y' I have maintained as set up time 10 Min's and operation time 30 Min's,
Now I want to change the work center in production order as a 'Y' so whatever value maintained in routing , it has to be changed automatically (10 min's and 30 Min's), but system will not change only old value only picked (15Min's AND 10 Min's).
Now I think you get to know what the client requirement, kindly do the need full.
Regards,
Sabhapathy R -
ABAP Dump while Changing the Layout fields in Report output - RCOPCA02
Hi,
I Copied the Standard Program RCOPCA02 to ZRCOPCA02. I added two new fields(AUART, AUGRU) in the report output. It is executing correctly with default layout, While Changing the layout for displaying new fields it is dumping.
I am not understanding, What should i do...
Here is the Code.
report ZRCOPCA02 no standard page heading message-id km
line-count (2) line-size 81.
type-pools: slis, ecarc.
DDIC-Tabellen *******************************************************
tables: glpca, "Einzelposten / Ist
glu1, "Übergabestruktur FI-SL-Anzeige
t000,
tka01,
sscrfields,
vbak.
Variablen und int. Tabellen *****************************************
data: l_vbeln like vbak-vbeln,
l_auart like vbak-auart,
l_augru like vbak-augru.
data: afield type slis_fieldcat_alv,
sp_group type slis_sp_group_alv,
t_listheader type slis_t_listheader with header line,
t_layout type slis_layout_alv,
t_fieldcat type slis_t_fieldcat_alv,
t_spec_groups type slis_t_sp_group_alv,
event type slis_alv_event,
t_events type slis_t_event,
g_variant like disvariant,
gx_variant like disvariant,
g_exit(1) type c,
g_save(1) type c,
g_repid like sy-repid,
msgtyp like sy-msgty,
lt_dynpread like dynpread occurs 1 with header line,
ls_rpcak like rpcak, "note 0310592
packsize type i value 1000,
text1(60) type c,
text2(60) type c,
oldkokrs like glpca-kokrs,
oldracct like glpca-racct.
data: whr_size type i value 50,"Maximum of single values per MIC 46a
"charact. in the where-clause of the select-statement
lines type i, "number of lines of range table MIC 46a
cnt_rldnr type i, "Zähler Anzahl selektierter Ledger
cnt_kokrs type i, "Zähler Anzahl selektierter KoReKreise
cnt_poper type i, "Zähler Anzahl selektierter Perioden
cnt_ryear type i, "Zähler Anzahl selektierter GeschJahre
cnt_rvers type i, "Zähler Anzahl selektierter Versionen
cnt_bukrs type i, "Zähler Anzahl selektierter BuKreise
empge like dkobr-empge,
ksl_curr like tka01-pcacur,
hsl_curr like t001-waers,
a_rec like rstirec.
data: begin of dim_data.
include structure rgcdi. "data for dimensions
data: end of dim_data.
data: begin of tab_fields occurs 80,
name like dntab-fieldname, "fields in table i_glpca
end of tab_fields.
data: begin of i_glpca occurs 0.
include structure rpca2.
data: racct_ktext like rpcak-ktext,
psppp like prps-posid,
v_auart like vbak-auart,
v_augru like vbak-augru,
end of i_glpca.
data: rw_subrc like sy-subrc, "Flag: Report-Writer-Schnittstelle
re_subrc like sy-subrc, "Flag: Recherche-Schnittstelle
subrc like sy-subrc.
data: set_id like sethier-setid, "Set-ID "RDI_SETS_4.0
set_class like sethier-setclass, "Setklasse "RDI_SETS_4.0
set_sname like sethier-shortname."Setname (24) "RDI_SETS_4.0
data: authorised(1),
s_message(1),
auth_dbcount like sy-tabix,
Hex-Konstanten für Minimum/Maximum-Werte
begin of hex00,
x1(12) type c,
x2(12) type c,
end of hex00,
begin of hexff,
x1(12) type c,
x2(12) type c,
end of hexff.
ranges rclnt for glpca-rclnt.
field-symbols: type ecarc_glpca_curr.
Selektionsoptionen *************************************************
select-options:
rldnr for glpca-rldnr default '8A' no-display,
rassc for glpca-rassc no-display,
rrcty for glpca-rrcty default 0,
rrcty for glpca-rrcty,
rvers for glpca-rvers default '000',
kokrs for glpca-kokrs memory id cac,
bukrs for glpca-rbukrs memory id buk,
poper for glpca-poper default sy-datlo+4(2),
ryear for glpca-ryear default sy-datlo,
poper for glpca-poper,
ryear for glpca-ryear,
prctr for glpca-rprctr matchcode object prct,
pprctr for glpca-sprctr matchcode object prct,
RACCT FOR GLPCA-RACCT MATCHCODE OBJECT KART, "RD_P30K128304
racct for glpca-racct, "RD_P30K128304
drcrk for glpca-drcrk,
activ for glpca-activ,
rhoart for glpca-rhoart,
rfarea for glpca-rfarea,
stagr for glpca-stagr,
rtcur for glpca-rtcur,
runit for glpca-runit,
versa for glpca-versa no-display,
eprctr for glpca-eprctr no-display,
afabe for glpca-afabe no-display,
rmvct for glpca-rmvct no-display,
hrkft for glpca-hrkft no-display, "note 550972
sbukrs for glpca-sbukrs no-display, "note 550972
shoart for glpca-shoart no-display, "note 550972
sfarea for glpca-sfarea no-display, "note 550972
docct for glpca-docct,
docnr for glpca-docnr,
refdocct for glpca-refdocct,
refdocnr for glpca-refdocnr,
werks for glpca-werks,
repmatnr for glpca-rep_matnr matchcode object pca_shlp_rep_matnr,
rscope for glpca-rscope.
parameters: no_rrint no-display default ' '." skip "MICP40K066037
" report-report-interface
display variant ">>MICP40K039857
selection-screen begin of block 0 with frame title text-e01.
parameters: p_vari like disvariant-variant.
selection-screen comment 47(40) varname for field p_vari.
selection-screen end of block 0.
parameters log_grp(4) type c no-display default 'KE5Z'.
"<<MICP40K039857
ranges: v_racct for glpca-racct,
v_prctr for glpca-rprctr,
v_pprctr for glpca-sprctr.
Tabelle mit Werten aus den Berichts-Set vom Report-Writer *
data begin of val_tab occurs 50.
include structure rgciv.
data end of val_tab.
MICP30K166368
feldkatalog und interface für bb-schnittstelle rw MICP30K166368
MICP30K166368
"MICP30K166368
data begin of bbs_fieldtab occurs 20. "MICP30K166368
include structure rstifields. "MICP30K166368
data end of bbs_fieldtab. "MICP30K166368
archiv
type-pools: rsds.
types: begin of ty_archive_objects,
object like arch_obj-object,
end of ty_archive_objects,
ty_t_archive_objects type ty_archive_objects occurs 2.
constants: lc_set type c value 'X',
lc_report type progname value 'KE5Z',
lc_reporttype type reporttype value 'TR'.
tables: admi_files.
select-options lr_files for admi_files-archiv_key no-display.
parameter: read_db type c default 'X' no-display,
read_ar type c no-display,
arc_obj like arch_obj-object no-display,
read_as type c default 'X' no-display.
data : lt_arch_obj type ty_t_archive_objects with header line,
ls_selections type rsds_frange,
lt_selections type rsds_frange_t,
ls_selopt type rsdsselopt,
lt_glpca_archiv type ecarc_t_glpca_curr.
*********************************************************>>MICP40K039857
INITIALIZATION
initialization.
Diverse Initialisierungen
perform init_vars.
g_repid = sy-repid.
Set default values for record type
rrcty-sign = 'I'.
rrcty-option = 'EQ'.
rrcty-low = '0'.
append rrcty.
rrcty-low = '2'.
append rrcty.
Set default values for period and year (if kokrs or bukrs is known)
get parameter id 'BUK' field bukrs-low.
get parameter id 'CAC' field kokrs-low.
if kokrs-low is initial "get contr. area from company code
and not bukrs-low is initial.
call function 'KOKRS_GET_FROM_BUKRS'
exporting
i_bukrs = bukrs-low
importing
e_kokrs = kokrs-low
exceptions
no_kokrs_found = 1
others = 2.
if sy-subrc <> 0.
clear kokrs-low.
endif.
endif.
if not kokrs-low is initial.
call function 'K_KOKRS_READ' "get fiscal year variant
exporting
kokrs = kokrs-low
importing
e_tka01 = tka01
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
call function 'G_PERIOD_GET'
exporting
date = sy-datlo
variant = tka01-lmona
importing
period = poper-low
year = ryear-low
exceptions
ledger_not_assigned_to_company = 1
period_not_defined = 2
variant_not_defined = 3
others = 4.
if sy-subrc = 0.
poper-sign = 'I'.
poper-option = 'EQ'.
append poper.
ryear-sign = 'I'.
ryear-option = 'EQ'.
append ryear.
endif.
endif.
endif.
Settings for display variants
g_save = 'A'. "Schalter Varianten benutz./allg. speichern
clear g_variant.
g_variant-report = g_repid.
g_variant-log_group = log_grp.
g_variant-username = sy-uname.
Get default variant
gx_variant = g_variant.
call function 'REUSE_ALV_VARIANT_DEFAULT_GET'
exporting
i_save = g_save
changing
cs_variant = gx_variant
exceptions
not_found = 2.
if sy-subrc = 0.
p_vari = gx_variant-variant.
endif.
Set variant
if p_vari is initial.
p_vari = '1SAP'.
move p_vari to gx_variant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = g_save
changing
cs_variant = gx_variant
exceptions
not_found = 1.
if sy-subrc ne 0.
clear p_vari.
clear gx_variant-variant.
endif.
endif.
varname = gx_variant-text.
"<<MICP40K039857
archiv
call function 'KARL_DATA_INPUT_INIT'
exporting
i_report = lc_report
i_reporttype = lc_reporttype
importing
e_xusedb = read_db
e_xusear = read_ar
e_archobj = arc_obj
e_infosys = read_as
tables
t_arch_sel = lr_files.
data: lt_excluding like sy-ucomm occurs 0 with header line.
call function 'RS_SET_SELSCREEN_STATUS'
exporting
p_status = 'SELSCREEN'
p_program = 'RCOPCA02'
tables
p_exclude = lt_excluding.
Initialisieren der Bericht/Bericht-Schnittstellen *
data: ld_no_rrint type boole_d. "note 490484 begin
import rri = ld_no_rrint from memory id 'RCOPCA02_NO_RRI'.
if ld_no_rrint = 'X'.
free memory id 'RCOPCA02_NO_RRI'.
else. "note 490484 end
call function 'G_REPORT_INTERFACE_INIT' "Report-Writer?
exporting "MICP30K166368
table = 'GLPCT' "MICP30K166368
importing
subrc = rw_subrc "MICP30K166368
tables "MICP30K166368
it_fieldr = bbs_fieldtab. "MICP30K166368
call function 'RSTI_APPL_STACK_POP'"oder Recherche?
importing
i_rec = a_rec
exceptions
appl_stack_not_initialized = 1.
re_subrc = sy-subrc.
if re_subrc = 0.
check Receiver is this report
if not ( ( a_rec-rtool = 'RT' and a_rec-ronam = 'RCOPCA02' )
or ( a_rec-rtool = 'TR' and a_rec-ronam = 'KE5Z' ) ) .
re_subrc = 2.
endif.
endif.
endif.
AT SELCTION-SCREEN on value request**********************************
*at selection-screen on value-request for racct-low. "RD "4.6a
"RD "4.6a
call function 'K_RACCT_VALUE_REQUEST' "RD "4.6a
importing "RD "4.6a
e_racct = racct-low. "RD "4.6a
"RD "4.6a
"RD "4.6a
*at selection-screen on value-request for racct-high. "RD "4.6a
"RD "4.6a
call function 'K_RACCT_VALUE_REQUEST' "RD "4.6a
importing "RD "4.6a
e_racct = racct-high. "RD "4.6a
at selection-screen on value-request for p_vari. "MICP40K039857
perform f4_for_variant. "MICP40K039857
at selection-screen on value-request for poper-low. "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
end of insertion note 522715
call function 'ECPCA_RPMAX_VALUE_REQUEST' "RD "4.6a
exporting "RD "4.6a
i_kokrs = kokrs-low "RD "4.6a
i_ryear = ryear-low "RD "4.6a
importing "RD "4.6a
e_rpmax = poper-low "RD "4.6a
begin of insertion note 522715
exceptions
table_empty = 1.
endif.
end of insertion note 522715
at selection-screen on value-request for poper-high. "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
end of insertion note 522715
call function 'ECPCA_RPMAX_VALUE_REQUEST' "RD "4.6a
exporting "RD "4.6a
i_kokrs = kokrs-low "RD "4.6a
i_ryear = ryear-low "RD "4.6a
importing "RD "4.6a
e_rpmax = poper-high "RD "4.6a
begin of insertion note 522715
exceptions
table_empty = 1.
endif.
end of insertion note 522715
AT SELCTION-SCREEN ***************************************************
at selection-screen.
perform pai_of_selection_screen.
begin of insertion note 522715
if not kokrs-low is initial.
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc <> 0.
message e101(ki) with kokrs-low.
endif.
endif.
end of insertion note 522715
archiv
if sy-ucomm = 'FC01' or sy-ucomm = 'UCDS'
or sy-ucomm = 'ONLI' and read_ar = 'X'
and read_as is initial and lr_files[] is initial.
if lt_arch_obj[] is initial.
lt_arch_obj-object = 'PCA_OBJECT'. append lt_arch_obj.
lt_arch_obj-object = 'EC_PCA_ITM'. append lt_arch_obj.
endif.
call function 'KARL_DATA_INPUT_SELECT'
exporting
i_db_and_arc = lc_set
i_infosys_possible = lc_set
i_object_fixed = 'V'
i_documentation = 'KARL_DATA_INPUT_SEL_KE5YZ'
i_report = lc_report
i_reporttype = lc_reporttype
tables
t_objects = lt_arch_obj
t_arch_sel = lr_files
changing
c_xusedb = read_db
c_xusear = read_ar
c_archobj = arc_obj
c_infosys = read_as.
endif.
START-OF-SELECTION **************************************************
start-of-selection.
Default-Werte löschen, falls Aufruf über Recherche
oder Report-Writer erfolgt ist
if no_rrint is initial and ld_no_rrint is initial. "note 490484
if rw_subrc eq 0 or re_subrc eq 0.
refresh: rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
versa, afabe, eprctr,
v_racct, v_prctr, v_pprctr.
clear: rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
versa, afabe, eprctr,
v_racct, v_prctr, v_pprctr.
endif.
Parameter einlesen über Report-Writer-Schnittstelle *
if rw_subrc eq 0.
perform rw_get_parameters.
oder Parameter einlesen über Recherche-Schnittstelle *
elseif re_subrc eq 0.
perform re_get_parameters.
endif.
endif.
if read_db = 'X'. " read from DB (archiv)
Bewegungsdaten einlesen und puffern...................................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten selektieren'(p10).
Use dirty trick to mislead DB-optimizer
call function 'DB_DO_NOT_USE_CLIENT_INDEX'
exporting
value = sy-mandt
tables
mandttab = rclnt.
select (tab_fields) from glpca
client specified
package size packsize
APPENDING CORRESPONDING FIELDS OF TABLE i_glpcaO
into corresponding fields of table i_glpca
where rldnr in rldnr
and rrcty in rrcty
and rvers in rvers
and kokrs in kokrs
and rbukrs in bukrs
and ryear in ryear
and rassc in rassc
and hrkft in hrkft "note 550972
and sbukrs in sbukrs "note 550972
and shoart in shoart "note 550972
and sfarea in sfarea "note 550972
and racct in racct
and rprctr in prctr
and sprctr in pprctr
and poper in poper
and drcrk in drcrk
and activ in activ
and rhoart in rhoart
and rfarea in rfarea
and versa in versa
and eprctr in eprctr
and afabe in afabe
and rmvct in rmvct
and docct in docct
and docnr in docnr
and stagr in stagr
and rtcur in rtcur
and runit in runit
and refdocct in refdocct
and refdocnr in refdocnr
and werks in werks
and rep_matnr in repmatnr "RDIP40K020663
and rscope in rscope "RDIP40K020663
and rclnt in rclnt. "dirty trick to mislead DB-optimizer
if sy-dbcnt > 1.
text1 = sy-dbcnt.
condense text1.
concatenate text1 text-m01 into text2 separated by space.
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = text2. " ... Datensätze gelesen
endif.
endselect.
Entfernt nicht zugehörige Einträge....................................
loop at i_glpca where ( not rprctr in v_prctr )
or ( not sprctr in v_pprctr )
or ( not racct in v_racct ).
delete i_glpca.
endloop.
endif.
*archiv
if read_ar = 'X' and not
( read_as is initial and lr_files[] is initial ).
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Lesen im Archiv'(p12).
define fill_lt_selections.
if not &2[] is initial.
clear ls_selections.
move &1 to ls_selections-fieldname.
loop at &2.
clear ls_selopt.
move-corresponding &2 to ls_selopt.
append ls_selopt to ls_selections-selopt_t.
endloop.
append ls_selections to lt_selections.
endif.
end-of-definition.
fill_lt_selections 'RLDNR' rldnr.
fill_lt_selections 'RRCTY' rrcty.
fill_lt_selections 'RVERS' rvers.
fill_lt_selections 'KOKRS' kokrs.
fill_lt_selections 'RBUKRS' bukrs.
fill_lt_selections 'POPER' poper.
fill_lt_selections 'RYEAR' ryear.
fill_lt_selections 'RPRCTR' prctr.
fill_lt_selections 'SPRCTR' pprctr.
fill_lt_selections 'RACCT' racct.
fill_lt_selections 'DRCRK' drcrk.
fill_lt_selections 'ACTIV' activ.
fill_lt_selections 'RHOART' rhoart.
fill_lt_selections 'RFAREA' rfarea. "note 401961
fill_lt_selections 'STAGR' stagr.
fill_lt_selections 'RTCUR' rtcur.
fill_lt_selections 'RUNIT' runit.
fill_lt_selections 'VERSA' versa.
fill_lt_selections 'EPRCTR' eprctr.
fill_lt_selections 'AFABE' afabe.
fill_lt_selections 'RMVCT' rmvct.
fill_lt_selections 'DOCCT' docct.
fill_lt_selections 'DOCNR' docnr.
fill_lt_selections 'REFDOCCT' refdocct.
fill_lt_selections 'REFDOCNR' refdocnr.
fill_lt_selections 'WERKS' werks.
fill_lt_selections 'REP_MATNR' repmatnr.
fill_lt_selections 'RSCOPE' rscope.
fill_lt_selections 'HRKFT' hrkft. "note 550972
fill_lt_selections 'SBUKRS' sbukrs. "note 550972
fill_lt_selections 'SHOART' shoart. "note 550972
fill_lt_selections 'SFAREA' sfarea. "note 550972
call function 'EC_PCA_SELECT_FROM_ARCHIVE'
exporting
i_selections = lt_selections[]
i_files_sequential_read = lr_files[]
importing
e_glpca = lt_glpca_archiv[]
exceptions
no_infostruc_found = 1.
if sy-subrc = 1.
message id sy-msgid type 'I' number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_glpca.
loop at lt_glpca_archiv assigning to i_glpca.
append i_glpca.
endloop.
endif.
if i_glpca[] is initial. "Info,nichts gefunden
message s000.
exit.
endif.
get texts for accounts ...............................................
sort i_glpca by kokrs racct.
loop at i_glpca assigning -racct_ktext = ls_rpcak-ktext.
endloop.
Liste mit Einzelposten geeignet sortieren.............................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten sortieren'(p30).
if show_ref is initial.
sort i_glpca by rldnr ryear rbukrs rrcty rvers
docct docnr docln.
else.
sort i_glpca by rldnr kokrs ryear rbukrs rrcty rvers poper
refdocct refdocnr refdocln.
endif.
Berechtigungsprüfung und gemerkte Belege aufbereiten .................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Berechtigungsprüfungen'(p40).
clear: cnt_rldnr, cnt_kokrs, cnt_ryear, cnt_rvers, cnt_bukrs.
loop at i_glpca assigning .
Berechtigungscheck
perform check_repo_authority changing authorised.
if authorised is initial.
delete i_glpca.
s_message = 'X'.
zählen der Sätze ohne Berechtigung
auth_dbcount = auth_dbcount + 1.
else. "Weitere Bearbeitung nur für berechtigte Belege...
Zusätzlich merken der Anzahl der Ausprägungen
bestimmter Dimensionen
on change of -rbukrs
ct = '10'
importing
currency = hsl_curr.
endon.
externe Immobilienbezeichnung "ww/kb
on change of i_glpca-imkey.
if ( not -dabrz
I_length = 20
importing
e_empge = -konty.
endif.
CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
endif.
endon.
on change of i_glpca-dabrz.
call function 'REMD_IMKEY_TO_EMPGE'
exporting
i_imkey = i_glpca-imkey
i_dabrz = i_glpca-dabrz
i_length = 20
importing
e_empge = i_glpca-empge
e_konty = i_glpca-konty.
CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
endon.
Konvertierungsproblem mit PSP-Nummer bereinigen
if not -psppp.
endif.
endif.
Währungen in Hilfsfeldern speichern
if -ksl_curr = ksl_curr.
endif.
modify i_glpca.
endif.
endloop.
Nachricht, wenn nicht alle Einzelposten angezeigt werden.
if not s_message is initial.
message s407(km) with auth_dbcount.
endif.
EP ausgeben...........................................................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten ausgeben'(p50).
t_layout-detail_initial_lines = 'X'.
t_layout-detail_popup = 'X'.
t_layout-f2code = 'PIC1'. "MICP40K039857
t_layout-get_selinfos = 'X'.
t_layout-group_change_edit = 'X'. "note 576149
perform fill_listheader.
perform fieldcat_fill.
perform spec_groups_fill.
perform events_fill. "MICP40K039857
">>MICP40K039857
call function 'K_KKB_LIST_DISPLAY'
exporting
i_callback_program = 'RCOPCA02'
i_callback_user_command = 'USR_CMD'
i_callback_top_of_page = 'TOP_OF_PAGE'
I_CALLBACK_END_OF_PAGE =
I_CALLBACK_END_OF_LIST =
i_callback_pf_status_set = 'SET_PF_STATUS'
I_CALLBACK_LAYOUT_SAVE =
I_CALLBACK_FIELDCAT_SAVE =
i_tabname = 'I_GLPCA'
is_layout = t_layout
it_fieldcat = t_fieldcat
I_FCTYPE = 'R'
IT_EXCLUDING =
it_special_groups = t_spec_groups
IT_SORT =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
tables
t_outtab = i_glpca
exceptions
others = 1.
loop at i_glpca.
select single vbeln auart augru
into (l_vbeln, l_auart, l_augru)
from vbak where vbeln = i_glpca-aubel.
if sy-subrc = 0.
move l_auart to i_glpca-v_auart.
move l_augru to i_glpca-v_augru.
modify i_glpca.
endif.
endloop.
call function 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
i_callback_program = 'ZRCOPCA02'
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USR_CMD'
i_structure_name = 'I_GLPCA'
is_layout = t_layout
it_fieldcat = t_fieldcat
IT_EXCLUDING =
it_special_groups = t_spec_groups
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = g_save
is_variant = g_variant
it_events = t_events
IT_EVENT_EXIT =
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = i_glpca
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
"<<MICP40K039857
clear i_glpca.
*& Form CHECK_REPO_AUTHORITY
Check only new auth-object K_PCA *
--> p1 text
<-- p2 text
form check_repo_authority changing authorized like authorised.
fill structure for userexit in K_PCA_RESP_AUTHORITY_CHECK
data: auth like pca_i_auth. "46a MIC check K_PCA and G_GLTP
auth-bukrs = -rrcty.
clear authorized.
check PrCtr/account/activity
call function 'K_PCA_RESP_AUTHORITY_CHECK'
exporting
i_kokrs = -racct
i_vorgn = 'REPP'
i_actvt = '28'
i_auth = auth
i_no_dialog_message = 'X'
exceptions
no_authority = 1
data_missing = 2
others = 3.
if sy-subrc = 0. "ok
check ledger/version/record type
call function 'PCA_G_GLTP_AUTH_CHECK'
exporting
rldnr = -rrcty
exceptions
no_authorisation = 1
others = 2.
if sy-subrc = 0. "ok, User is authorized
authorized = 'X'.
endif.
endif.
endform. " CHECK_REPO_AUTHORITY
*& Form INIT_VARS
Initialisieren diverser Hilfsvariablen und -tabellen *
form init_vars.
data begin of nametab occurs 80. "Tabelle mit Feldern aus der RPCA2
include structure dntab.
data end of nametab.
select single * from t000
client specified
where mandt = sy-mandt.
refresh nametab.
call function 'NAMETAB_GET'
exporting
only = 'T'
tabname = 'RPCA2'
tables
nametab = nametab.
Übernehmen der Feldnamen, die auch in der GLPCA
vorkommen.
loop at nametab where fieldname ne 'KSL_CURR'
and fieldname ne 'HSL_CURR'
and fieldname ne 'EMPGE' "ww/kb
and fieldname ne 'KONTY'. "ww/kb
move nametab-fieldname to tab_fields-name.
append tab_fields.
endloop.
fill Fields of receiver for BBS "MIC46C
call function 'RSTI_REPORT_FIELDS_FIND'
exporting
e_repid = 'RCOPCA02'
e_type = 'R'
tables
it_fields = bbs_fieldtab.
correct fieldnames
read table bbs_fieldtab with key rfield = 'PRCTR'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'RPRCTR'.
modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'PPRCTR'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'SPRCTR'.
modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'BUKRS'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'RBUKRS'.
modify bbs_fieldtab index sy-tabix.
endif.
Unicode
class cl_abap_char_utilities definition load.
clear hex00 with cl_abap_char_utilities=>minchar.
clear hexff with cl_abap_char_utilities=>maxchar.
endform. " INIT_VARS
FORM FILL_LISTHEADER *
List-Header in Abhängigkeit der selektierten Daten *
form fill_listheader.
read table i_glpca index 1.
if sy-subrc ne 0.
exit.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Ledger '(h01).
if cnt_rldnr <= 1.
t_listheader-info = i_glpca-rldnr.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Kostenrechnungskreis'(h02).
if cnt_kokrs <= 1.
t_listheader-info = i_glpca-kokrs.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungskreis '(h03).
if cnt_bukrs <= 1.
t_listheader-info = i_glpca-rbukrs.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungsperiode '(h04).
if cnt_poper <= 1.
t_listheader-info = i_glpca-poper.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
if cnt_ryear <= 1.
t_listheader-typ = 'S'.
t_listheader-key = 'Geschäftsjahr '(h05).
t_listheader-info = i_glpca-ryear.
append t_listheader.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Version '(h06).
if cnt_rvers <= 1.
t_listheader-info = i_glpca-rvers.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
endform. "fill_listheader
*& Form FIELDCAT_FILL
*& Aufbau des Feldkataloges für den K_KKB_LIST_DISPLAY, *
*& bzw REUSE_ALV_LIST_DISPLAY, *
*& weitere Infos enthält die FktBaustein-Doku *
form fieldcat_fill.
data: i type i value 0.
refresh t_fieldcat.
Ledger
if cnt_rldnr > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RLDNR'.
afield-no_sum = 'X'.
afield-no_out = 'X'.
afield-key = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Satzart
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RRCTY'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
Version
if cnt_rvers > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RVERS'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Periode
if cnt_poper > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'POPER'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Geschäftsjahr
if cnt_ryear > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RYEAR'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Referenzbelegtyp
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'REFDOCCT'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel = 'X'.
afield-no_sum = 'X'.
afield-sp_group = '2'.
afield-seltext_s = 'Typ'(t01).
afield-seltext_m = 'Belegtyp'(t02).
afield-seltext_l = 'Ref.Belegtyp'(t03).
afield-outputlen = 3. "Platz für die Sterne der Zwischensummen
if not show_ref is initial.
afield-key = 'X'.
else.
afield-no_out = 'X'.
endif.
append afield to t_fieldcat.
Referenzbelegnummer
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'REFDOCNR'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel = 'X'.
afield-no_sum = 'X'.
afield-sp_group = '2'.
afield-seltext_s = 'Refbeleg'(t04).
afield-seltext_m = 'Refbelegnr'(t05).
afield-seltext_l = 'Ref.Belegnummer'(t06).
if not show_ref is initial.
afield-key = 'X'.
else.
afield-no_out = 'X'.
endif.
appendHi Prabhu,
You are right, problem is with Field Catalog...
When I use FM 'REUSE_ALV_GRID_DISPLAY' it is dumping...
When i tried with FM 'REUSE_ALV_LIST_DISPLAY' it is working perfectly....
how can i use FM 'REUSE_ALV_GRID_DISPLAY' without dumping????
do i need to pass any thing in FM????
Here is the dump:
Runtime Errors MESSAGE_TYPE_X
Occurred on 12/21/2006 at 01:03:24
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Technical information about the message:
Message classe...... "0K "
Number.............. 000
User, transaction...
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLSLVC "
Screen.............. "SAPLSLVC_FULLSCREEN 0500"
Screen line......... 3
Information on where termination occurred
The termination occurred in the ABAP program "SAPLSLVC " in "LINE_OUT_NEW_2".
The main program was "ZRCOPCA02 ".
The termination occurred in line 918 of the source code of the (Include)
program "LSLVCF01 "
of the source code of program "LSLVCF01 " (when calling the editor 9180).
Source code extract
008880 gs_roid-row_id = rs_row-index * -1.
008890 endif.
008900 gs_roid-sub_row_id = rs_row-rowtype+7(10).
008910 gs_poid-row_id = gs_roid-row_id.
008920 gs_poid-sub_row_id = gs_roid-sub_row_id.
008930 gs_poid-rowtype = rs_row-rowtype.
008940 gs_poid-index = rs_row-index.
008950 insert gs_poid into table rt_poid.
008960 endif.
008970 append gs_roid to rt_roid.
008980
008990 loop at rt_fieldcat assigning <ls_fieldcat> where tech ne 'X' and
009000 no_out ne 'X'.
009010
009020 if gflg_invisible = 'X'.
009030 if <ls_fieldcat>-do_sum is initial.
009040 clear gflg_invisible.
009050 continue.
009060 else.
009070 clear g_col_counter.
009080 clear gflg_invisible.
009090 endif.
009100 endif.
009110
009120 clear gs_lvc_data.
009130 clear g_style.
009140
009150 assign component
009160 <ls_fieldcat>-fieldname of structure rt_data to <g_field>.
009170 if sy-subrc ne 0.
> message x000(0k).
009190 endif.
009200
009210 g_col_counter = g_col_counter + 1.
009220
009230 gs_lvc_data-row_pos = r_row_counter.
009240 gs_lvc_data-col_pos = g_col_counter.
009250 gs_lvc_data-row_id = gs_roid-row_id.
009260 gs_lvc_data-sub_row_id = gs_roid-sub_row_id.
009270
009280 * Endtotal and average
009290 if rs_row-rowtype(1) ca 'T' and <ls_fieldcat>-do_sum = 'C'.
009300 * save the actual grouplevel information
009310 gs_grouplevels = rs_grouplevels.
009320 clear g_lines.
009330
009340 * get number of lines of the collect table
009350 describe table rt_data lines g_lines.
009360 * if there is only one line or the field has no references so
009370 * that only the first line has to be considered
Thanks,
fractal
null -
Error in CV02N while changing the status.
Hi Experts,
We are getting a error while changing the status of technical change document that " Inconsistent characteristic value assignment" .The document is in status "in use" and we are trying to change it to " old version" using T code CV02N.
when I tried to see the error desription it is telling that delete the inconsistencies. But I didn't find the list of incosistencies. What may be the problem? Please help me out to get ride of this problem.
Thanks and best regards,
PraveenHi Pete,
The full text message: Inconsistent characteristic value assignment
Message no. C1821
In diagnosis it is telling that "You want to change the value assigned to a characteristic. However, the change causes inconsistency, so the new value is not allowed."
Actually I am just changing the status of the document. I am not changing any characteristic value.
Actually it is appearing as information message. but while saving it pop up and not allowing to save.
Please do the needful.
Best Regards,
Praveen -
Error while implemention ORDER_SAVE in CRM 2007
Hi,
At present we are experiencing an error while implementing badi ORDER_SAVE for sending CRM (2007)sales order data to PI (7.1) through ABAP proxy. In the BadI implementation we have created the Proxy Object through class (generated while defining the Proxy object in PI) and pass the SO details through the method available.
Error ' Administration header not Found' while saving the CRM sales Order.
Please let me know is any changes done in CRM 2007 for BadI implementation. Also suggest the best way to go forward to resolve this problem.
Thanks & Regards
DebU can do it.. But what i suggest is.. create a Z Function Module that will trigger in background in seperate task by passing the GUID.
In this Z FM write all your code related to the Proxy... -
I've moved to photos from iphoto and for a while all was good. And quite exciting. My entire 15k photos have migrated and are available on all my devices.
Suddenly, I get this warning when I select or try to edit a photo: Cant Download Photo: An error occurred while downloading a larger version of this photo for editing. Please try again later.
There is an exclamation mark and a warning triangle on the picture. I am only able to test on my ibook as my Imac is out of action.
If I log in to icloud in Safari, I can down load the full sized image no problem. Any one got any ideas?Well stone me, it's started working. Nothing changed on my side..... go figure.
-
While changing the status of content in Weblogic 10.3 programitically
while changing the status of content in Weblogic 10.3 programitically is giving the error
User is not authorized to check in the node.
at com.bea.content.virtual.internal.server.bean.InternalWorkspaceOpsBean.handleWorkflowActions(InternalWorkspaceOpsBean.java:480)
at com.bea.content.virtual.internal.server.bean.InternalWorkspaceOpsBean.internalCheckIn(InternalWorkspaceOpsBean.java:420)
at com.bea.content.virtual.internal.server.bean.InternalWorkspaceOpsBean.checkIn(InternalWorkspaceOpsBean.java:343)
at com.bea.content.virtual.internal.server.bean.WorkspaceOps_xe5vix_ELOImpl.checkIn(WorkspaceOps_xe5vix_ELOImpl.java:166)
at com.bea.content.virtual.internal.WorkspaceOpsImpl.checkIn(WorkspaceOpsImpl.java:90)
at com.bea.content.federated.internal.VersionManagerImpl.checkIn(VersionManagerImpl.java:239)
at com.nab.portal.portlets.cmscontent.EndDateCMSContent.updateNodeStatus(EndDateCMSContent.java:243)
at jsp_servlet._portlets._cmscontent.__sampletest._jspService(__sampletest.java:140)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.continueChainNoWrapper(PageFlowPageFilter.java:455)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:432)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:336)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.bea.jsptools.servlet.PagedResultServiceFilter.doFilter(PagedResultServiceFilter.java:82)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:503)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:251)
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:130)
at org.apache.beehive.netui.pageflow.faces.internal.PageFlowViewHandler.renderView(PageFlowViewHandler.java:203)
at com.bea.portlet.adapter.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:77)
at org.apache.beehive.netui.pageflow.faces.internal.PageFlowViewHandler.renderView(PageFlowViewHandler.java:203)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.continueChainNoWrapper(PageFlowPageFilter.java:455)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:432)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.nab.portal.filter.UserSessionFilter.doFilter(UserSessionFilter.java:176)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.nab.portal.filter.CrossSiteScriptingFilter.doFilter(CrossSiteScriptingFilter.java:333)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.bea.portal.tools.servlet.http.HttpContextFilter.doFilter(HttpContextFilter.java:60)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:336)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.bea.jsptools.servlet.PagedResultServiceFilter.doFilter(PagedResultServiceFilter.java:82)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3502)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2186)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2092)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
the node is checke odut by annoymous user biut its not checked in the status from 1 to 2 is updated but it not updated to published or retired
are there any Entreprise scoped roles which sholud be created to set the visitor entitlements on the content
Please do reply asap
Thanks
Regards
Rani
Rani Bhatiahi
while changing the sttaus of content in weblogic 10.3 programitcally
i have written this code List nodeIds=null;
INodeManager iNodeManager= ContentManagerFactory.getNodeManager();
try {
ID nodeId = new ID();
nodeIds = new ArrayList();
linkNode =iNodeManager.getNode(ctx,fileName);
log.info("Linknode"+linkNode);
String Encodedpath= linkNode.getURLEncodedPath();
log.info("Encodedpath"+Encodedpath);
com.bea.content.ID nodeid= linkNode.getId();
nodeIds.add(nodeid);
log.info(nodeid);;
String repoName = nodeid.getRepositoryName();
log.info("repoName"+repoName);
IVirtualRepositoryManager repoMgr = ContentManagerFactory.getVirtualRepositoryManager();
com.bea.content.federated. IVersionManager iversionManager= ContentManagerFactory.getVersionManager();
com.bea.content.federated.IWorkflowManager iWorkflowManager= ContentManagerFactory.getWorkflowManager();
if(linkNode!=null)
int i= linkNode.getWorkflowStatus();
log.info("Workflow Status"+i);
int j=linkNode.getLifeCycleStatus();
log.info("Workflow Status"+j);
linkNode.setLifeCycleStataus(5);
linkNode.setWorkflowStatus(5);
//iNodeManager.save(ctx, linkNode);
iversionManager.checkOut(ctx, nodeid, version.getVersionId()); com.bea.content.virtual.version.VersionableContent versionableContent1 = iversionManager.getVersion(ctx, nodeid, "1");
versionableContent1.setStatus(5);
iversionmanager.checkIn(ctx, nodeid, versionableContent1);
log.info("checkin");
b=true;
else
b=false;
log.info("Node already retired ");
catch (AuthenticationException auex) {
log.error("WEB1013IF-3 getLinkNode" + auex.toString());
} catch (AuthorizationException authex) {
log.error("WEB1013IF-4 getLinkNode" + authex.toString());
}catch (RepositoryException repoEx) {
log.error("WEB1013IF-5 getLinkNode" + repoEx.toString());
return b;
by default annoymous user check out the node
if for any logged in user which api has to be used eg if i have created the weblogic user how to set this user through api , which apis are used to set this user programmitically so that this user can check out the node and check in the node so that its status can be updated
Thanks
Regards
Rani Bhatia
Edited by: user10309975 on Jul 5, 2010 10:29 PM -
How to keep data in session while changing webshop in ISA 4.0?
Hi All,
I have one requirement in my current project. We are showing Webshops in "categoriesB2C.jsp" file in "left" side. We have four webshop as below.
1) Shop By Market
2) Shop By Product
3) Shop By Quick Ship
4) Shop By Price.
I am hiding webshop in "Categories.jsp" selected in "shoplist.jsp" now when I put some product in shopping cart or I login in B2C. and then click on any link of webshop which I have provided in "categoriesB2C.jsp" I am using below link
"<a href="/b2b_virco/b2b/init.do?shopId=PRODUCT">" around webshop name in "categoriesB2C.jsp" if I use
<a href="/b2b_virco/b2b/readshop.do?shopId=PRODUCT"> then I am getting error.
Now I want to preserve my selection while changing the webshop. right now it is changing the webshop but it is not preserving the data in "cart" and if I am login then it just throw me out and reset my selection in shopping cart.
Any idea or any help is a great help for me.
Thanks.
Ashish Patel.Dr. Iman, thanks, but I made your suggested change and the same result applies. I removed the "Close File" vi from the loop and even wired a "False" boolean variable to the "Close When" port of the "Write to C" vi. The results from previous loops are still being over-written by later loops leaving only one loop of data by the time the vi is finished running.
Any other ideas? I have attached the latest version of the vi that I am working on this.
Attachments:
Traverse_Alive_Triple_Bypass.vi 140 KB -
Report alignment and header not proper while modifying using MS Office 2007
We have an RTF template designed using old MS Office version (1997 - 2003).
Wehn we save the document after making any change using MS Office 2007, the alignment is changed in the merged PDF output (esp. table cell border hiding / displaying).
Moreover, the data in page header (data from XML) is not appearing.
Any ideas?Hi Kumar
If I understand you correctly, I think the the following should work:
I Assume text-006 = 'fiscal year :'
CONCATENATE text-006 p_gjahr INTO ls_line-info SEPARATED BY space.
APPEND ls_line-info TO lt_top_of_page.
NB space will put a space between the variables being concatenated but you can use any variable in there eg for a comma separated list etc.
Hope that helps.
Andy
Message was edited by: Andrew Wright
In addition to this rather than trying to use offsets to position the text within the variable, you could use the SHIFT command as follows:
SHIFT ls_line-info RIGHT DELETING TRAILING space.
If you insert this between the CONCATENATE and APPEND statements above it should right-justify the text within the ls_line variable.
Kind regards
Andy -
Aperture 3 display wrong image while editing (video example)
Aperture 3, clean install, running on an upgraded Aperture 2 library. Whenever I make a change to a photo, Aperture displays the previous photo on the screen. It correctly edits the photo I have selected, it just displays the wrong image while doing so. Anyone else have this issue?
Video: http://www.youtube.com/watch?v=4bRI9xFBEKIIt seems you have a rare problem.
If the advice already given regarding upgrades fixes thing then all well and good.
If not you might try Matthew Bergsmas tip in:-
http://discussions.apple.com/thread.jspa?threadID=2357072&tstart=0
This reads as follows:-
Go to the finder and move everything in these folders to the trash:
Hard Drive/Library/Caches
Hard Drive/System/Library/Caches
Hard Drive/Users/Your username/Library/Caches
Then reboot.
=====
Aperture will rebuild the caches but give it time.
AW -
While changing location address error is : Address still in use
Hi All,
We are on SRM 4.0 with extended classic.
I want to correct, address of one of location. However while changing the address in transciation BP, system is giving error as : Address still in use; change to validity not allowed.
I changed first validity of references and then tried to correct address of location, but still it is giving same error.
Can anybody update me how to change address of location.
Thanks,
SachinHi
In old version we do have WRK attribute. I will check it up.
what is the right Attribute value for PLANT and get back to you since you maintained via extended attribute ....right
I understand your problem
Hi Sachin do you have WRK attribute in that report.
if yopu were changed in r/3 plant text not try to do with BP.
regards
muthu
Maybe you are looking for
-
Hi all, My iphone was making and receiving calls no problem yesterday but today when i go to make/receive a call there is this really loud siren like noise on the call and nobody can hear one another. I put the phone on loudspeaker and its fine no pr
-
Is there the viber application on Nokia asha 306
I needed to keep in contact with my friends & family. So i checked for viber in the app store & it showed me no result. Please Nokia get a version on Nokia asha 305/306. Moderator's Note: The post was moved to a more appropriate board.
-
How can I format a result to a specified exponent (engineering format)
I'm displaying a number of resistance values. To make the results easier to read for the operator I'd like to format the measurement and limits so that the exponent is stepped at 3 intervals (engineering format). i.e. by default TestStand will displa
-
Hi All, Please tell me how to put break point in Smartform using the break point statement. Thanks, Neethu.
-
Syntax for embeding data bound values
This does not work: source="@Embed(source='{sourceFile}'))" autoLoad="true"/> <mx:String id="sourceFile">file:///C|/FlexWork/flex maps/assets/products/Talby.png</mx:String> nor does simply @Embed({sourceFile}) So what does work?