Wrong Driver for Live! 5.1 digit

I am trying to install my Soundblaster Li've! 5. digital after a re-install of WXP. I found Li'veDrvUni-Pack(ENG) as the one I should try (I lost the CD). I get the message "Setup could not detect any Sound Blaster Audio card on your system."
Who knows what to do?

I have the same card the sound blaster li've 5. platinum with digital exit and li've dri've II, with the support system I found the same Li'veDrvUni-Pack(ENG). The driver works on my sistem but is selected on 4 speaker system, I have 5. and I can't use the central channel.
On the site www.suondblaster.com my card doens't exist, but I have its box at home....

Similar Messages

  • Vista Driver for Live Motion

    http://ask.creative.com/wwenglish/vi..._matrix_de.htm WebCam Live! Motion32-Bit Treiber Q4 CY2007?64-Bit Treiber TBC Q4 2007 Its a bad joke, isn't it?

    Hello, i've had my Creative Live Motion working fine under Vista for weeks until today after i have uninstalled the Logitech Quickcam software from my computer (as it doesn't work with my Sphere only the new Sphere MP). After that the Creative driver stopped working, i have searched around on internet and in this forum and looks like everybody have the same problem under Vista. after having tried everything else I have decided to reinstall the latest Logitech Vista driver :http://www.logitech.com/index.cfm/do...,contentid=003 and then the 2000/xp driver for the Live Motion from Creative website which finally installed correctly and is again working fine. I have developped webcamXP and i've been using this driver under Vista for days without interruptions and without any problems, everything is working fine including the directX functions to control the pan and tilt through software. This worked for me i hope it'll work for you

  • Wrong driver for Deskjet 3940

    I had a paper jam on my Deskjet 3940, but when I cleared the jam, I could not clear the paper jam message and the printer would not print.  I uninstalled the printer, then reinstalled it to see if that would handle the problem, but when I tried to print a document, I got an error message for a fax machine instead of a printer.  There was no available download for the printer driver on HP's website, so Windows 7 downloaded the drivers automatically.  When I connected the printer to another windows 7 machine which I have, it worked perfectly.  My device screen on the problem computer shows the 3940 printer with the paper jam message still there, but attempts to print just result in the fax machine error message.  Also tried unplugging and plugging back in the printer, but no change there.  Can anyone help?

    Hello rez33,
    Welcome to the HP Forums.
    I see that you are having an issue with a false Paper Jam error since you cleared a Paper Jam.
    Please click on the following link that deals with A 'Mechanism Error' Displays on the Computer (Paper Jam) for HP Deskjet Printers.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • CS5 using wrong drives for scratch

    I'm running CS5 in win7/64bit, booting from C: and have a bunch of other drives, one of which is a FAT formatted external I: I have scratch set up on L: and C:, I: is unchecked in the performance prefs, yet PS is using I: for scratch. I can tell this because I see files like 5380_982581875_MVM_0.tmp created (interestingly they appear when running liquify).
    I'm getting a disk full pop-up in liquify even though the disk isn't full - the problem is that the scratch file is getting to be 4gb which is the limit for FAT. Procmon (from sysinternals) confirms that it's the file on I: that's being written to when liquify gives the pop-up (and that a disk full error is happening).
    Anyway, the real question is why PS is using the I: drive when it's not configured to do so..?
    thanks,
    ...rob

    Thanks for the quick (and helpful) reply. I think you're on the right track; the 'Photoshop Temp' file is in the right place, and the MVM files are only created when I'm running liquify (and perhaps other plugins as referred to in the post you mentioned).
    I tried creating a c:\Temp as suggested but the files still go in a 'random' place. Disconnecting the FAT drive means liquify works for me now as they are going to an NTFS drive but it would still be nice to decide where they go.
    I've not come across Mondo before, and google isn't coming up with anything interesting. Do you know where I can find any info on it?
    thanks,
    ...rob

  • Coaxial connectors for Live 5.1 "Digit

    Hi,
    I want to upgreade my Sound Blaster li've 5. Digital with Spdif coaxial connectors (input and output). Is there any chance to do that? because all the upgrades that I know (creative or not) are for "not digital" Li've 5. (have different internal conexion)
    Thanks
    Daniel

    I have the same card the sound blaster li've 5. platinum with digital exit and li've dri've II, with the support system I found the same Li'veDrvUni-Pack(ENG). The driver works on my sistem but is selected on 4 speaker system, I have 5. and I can't use the central channel.
    On the site www.suondblaster.com my card doens't exist, but I have its box at home....

  • Hello, i am using iphone 4. I made the wrong purchase for ipad.navturk live navigation i bought. just trying to do update. I would ask you to cancel the order. best regards.

    Hello, i am using iphone 4. I made the wrong purchase for ipad.navturk live navigation i bought. just trying to do update. I would ask you to cancel the order.
    best regards.

    There is no one here from Apple or iTunes support. You need to contact iTunes support here:
    http://www.apple.com/support/itunes/contact.html

  • Need driver for-webcam live!

    dose anyone have a driver for-webcam live! - i have been informed that the driver for my webcam has been classified as "end of service life "thanx

    Hi:
    If you have already installed the graphics driver, you need to install the YouCam software.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135497-1&cc=us&dlc=en&lc=en...

  • Sierra Wireless driver for native support for 10.5 displays wrong network

    Anyone getting the wrong wireless network with the Sierra Wireless driver for native support in Leopard? Sometimes when my AT&T 881u cannot connect, the mini card starts displaying Verizon information. This only happens once every couple of weeks. AT&T says its Sierra Wireless' problem and Sierra says the issue is Apple's.
    I took a picture of the issue with my iPhone. I'll post a link as soon as I get a chance to sync.
    This card normally works great, but this issue is really strange since AT&T G3 network shouldn't be compatible with Verizon's EVDO.

    That model is included in the hpijs and ESP ghostscript driver set:
    http://www.linuxprinting.org/macosx/hpijs/
    When you get that installed, come back with print server model for setup help. Since there isn't auto setup software for OS X, we need to setup all the details.

  • Please suggest driver for microsoft lifecam studio for to work with live stream procaster

    I have microsoft life cam studio using to broadcast live through live stream procastrer. I am using mac mini with mac os lion 64bit.But default driver for this studio cam is not supporting to go live with proper crop and quality settings. Can anyone provide driver for this camera ?

    Hi, no idea really, but perhaps see if this could work for what you want...
    http://www.google.com/url?q=http://www.bensoftware.com/securityspy/&sa=U&ei=QUGH T4z4K4WciQL436yGAw&ved=0CBEQFjAA&usg=AFQjCNEC9fzmWGOiPtM0kRHyzfST3Kh5jQ

  • Driver for WebCam Live! Pro (USB 2.0) vf-0080

    I know I have a very old webcam, but the one on my laptop broked so I have to use this.
    It is a WebCam Live! Pro (USB 2.0) vf-0080 and I wonder if there is Anyway I can find the drivers for it?

    Here is the site that you can download the driver for Webcam Live! Pro
    The driver only supports until Windows XP, but I think your webcam should be able to be auto detected in Windows 7 and Windows 8. So you may not need to install any driver if you are using Windows 7 and Windows 8.

  • IPhoto - My iPhoto is not responding. When I click on iPhoto I get a never ending spinning beachball.  I almost think it is looking in the wrong place for the pictures.  How do I redirect it back to the Mac hard drive?

    My iPhoto is not responding.  Whenever I click on the iPhoto icon I get a twirling beachball.  It is as if the machine is looking in the wrong place for the photos.  How can I see where the machine is looking to find out if this is really the problem.  How can I see the path?

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists. If it doesn't then the problem lies with your current library.
    If that's the case  Apply the two fixes below in order as needed: 
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Driver for CT4660 digital I/O card - with Soundblaster Live SB0

    Hi - I searched the Knowledge Base here and the Support Driver section of the Creative Labs website and nowhere can I find a driver for the Digital I/O card CT4660. I have a Soundblaster Li've SB000 and the digital I/O card together with the connector cable. Can anyone help me out or point me in the right direction? Googled the web too, but just found one other message of someone looking for the same thing with no replies posted to that thread.
    Thanks and happy New Year.
    Mike

    ort 0) configured for buffered output. Intermittently the following error appears, "An exception 0E has occurred at address in VxD NIPALK (01) + address. This was called from address in VxD NIPALK (01) + address. It may be possible to continue normally.I've never seen this error before, but there is a newer version of the NI-DAQ driver (6.9) available for download from the NI website at:
    http://digital.ni.com/softlib.nsf/current

  • SB Live! (DELL OEM) driver for Windows 7

    I've just installed Win7 on my Dell Dimension 4600 which has an on-board Creative SB Li've! (Dell OEM) device.
    Everything has installed ok but I'm pulling my hair out trying to resolve the Windows 7?driver requirements for this device. The DELL Resource CD doesn't seem to provide the drivers and the supplied and the original Sound Blaster Li've! CD that came with ther system doesn't find the device.
    I've looked all over the place for a windows 7 driver for this device but without success.
    Failing this, I was thinking of purchasing a Creative Sound Blaster 5. VX PCI card but would like to know if this device is Windows 7 compatible.
    Steve

    , In all sincerity, the SB Li've is simply too old of a card to install for Windows 7. The card would only have basic functions anyway. You should check on Ebay for an X-FI of some sort and I truly believe you would get 3 to 4 years out of that card or the life of Windows 7.
    Any money you spent on that card has long come back to you as old as that card is. You can buy an X-FI from $30 to $50 on ebay, and I have done it for MANY friends and family.

  • Sound Blaster Live! Value Sound Card Driver for

    Hi, I have an older sound card that I purchased in 200: Sound Blaster Li've! Value Sound Card. The website doesn't seem to have the driver for this specific model. I'm looking for an Windows XP driver. Can anyone direct me to the right place to download this?

    http://us.creative.com/support/downloads/download.asp?MainCategory=&nRegionFK=&nCountryFK=& nLanguageFK=&sOSName=Windows+XP&region=&Product_Na me=Li've%2&Product_ID=4857&modelnumber=&driverlang =033&OS=0&drivertype=0&x=24&y=3
    They really should make the "Search archi'ves" link on this page,
    http://us.creative.com/support/downloads/welcome.asp?action=next
    bright red and about six inches high.

  • Help I need to locate a driver for my soundblaster live 24 bit soundcard

    My son has been given the following PC games for christmas:-
    Command & Conquer 3,
    Command & Conquer Red Alert 3,
    Arma; Armed Assault,
    Medal of Honour: Airborne
    The problem he is having installing these 4 games is this. About half way through installation an error message appears that quite simply states "The software you are installing does not bear a WHQL signed driver. This software will not be installed".
    The PC we are running is a Dell Dimension 900, that we purchased about 4 years ago, and it was bespoke.
    I have run DxDiagnostics and it tells me that the driver for the graphics card is called p7.sys and the sound card are not WHQL logo'd, so how the hell do i download a driver for my soundblaster Li've 24 bit, that does? bear a digital signatre that is WHQL Logo'd. I hope you can help, me please.
    Message Edited by simonwicker on 2-26-2008 2:9 PMMessage Edited by simonwicker on 2-26-2008 2:25 [email protected]

    Re: Help I need to locate a driver for my soundblaster li've 24 bit soundcard? I guess you and your son are currently using windows xp. Well, what you can do is now is ignoring the WQHL pop-up window and choose the "install anyway" option during the installation of the soundcard driver, since WQHL only means the driver is tested by Microsoft and nothing more; drivers without the WQHL qualification does not mean they are bad drivers, they usually works as good as the WQHL ones.
    Ofcourse you can also download the official drivers for the mentioned Soundblaster li've 24bit at Creative Labs support/download site.
    here is it:
    [url="http://uk.europe.creative.com/support/downloads/download2.asp?MainCategory=&Product=035&dlcentric= 025&Product_Name=Li've%2+24-bit&filetype=&OSName=Windows+XP">Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077 (63.39 MB)?[/url]
    The driver is for all Soundblaster Audigy Value, SE, LS and Soundblaster Li've 24bit, since they are all based on the CA-006 soundchip (with other words Creative Labs renamed the soundcard several times). Also this driver should be WQHL-ed (if not, choose "install anyway" option during installation of the soundcard driver). Make sure you have uninstalled the older driver before installing the new one. For troubleshooting use utilies like "Driver Cleaner" or "Driver Sweeper" (google for Guru3D and go to the site and their download section to get the utilities/tools) to clean up the junk files of the older driver that are left in the Windows OS.
    Good luck and Merry Christmas!!!
    Message Edited by CTman on 2-26-2008 0:2 [email protected]

Maybe you are looking for