Wrong DTR server selection....

Hello All,
Please help me understand this concept:
Am working on 2 sneak preview portal versions...EP6 EP15 & EP7 SP7.
1. Had initially configured and created DTR client for EP7. Now I have created a new DTR client for EP6. So I can see 2 DTR clients under DTR menu in NWDS.
2. Have changed the SAP J2EE Engine config to that of EP6 server & Message server post.
3. Updated the Java Development Infrastructure -> Development Configuration Pool & its pinging (EP6 server URL)
Question:
Now everytime I try to login into DTR of EP6, the prompt window shows that it getting connected to EP7 server. Why so?
To confirm this, I created a new DTR client of EP6 server & after entering userid passowrd the prompt window showed ...Checkign userid and password....for EP7 server.....
Am totally confused....from where is the EP7 server DTR coming here.....
Hope I am clear with the query.....
Please guide.....
Awaiting Reply.
Thansk & Warm Regards,
Ritu

Hi Siddharth,
I have deleted all the DTR clients & then created just one that points to EP6. Iniitally I was not able to delete the clients coz I was logged into DTR but then I accessed NWDS without loggin and it worked.
But now I see something more.....
I created a new & single DTR client named newDTR_EP6.
After I log into DTR (via NWDS), I see another client named EP_AD0 and its the default one....
How does this happen?
Any inputs???
Awaiting Reply.
Thanks & Warm Regards,
Ritu

Similar Messages

  • MDM 7.1 data manager server selection issue

    Hello,
    I have come across a little feature in MDM 7.1 that is worth mentioning. I made a mistake by entering the wrong server into the data manager data server selection dialogue. I first typed in wrongly:
    serverxyz:mdp when the server should simply have been  serverxyz. The outcome however was that with both the right and the wrong server entered the selection box in the server selection would automatically complete the server to the wrong entry and I could not select serverxyz.
    The solution (for now) is to edit the registry on the client windows machine, by doing the following:
    -> go to START menu and Select RUN
    -> type in regedit
    navigate to
    HKEY_LOCAL_MACHINE
    ->SOFTWARE
    -->SAP
    --->MDM 7.1
    >COMMON
    >KNOWN SERVERS
    Delete any entry there that doesnu2019t work and that solves my issues.
    I hope this helps anyone running into the same issue.

    Thank you - nice hack.

  • DTR Server  is unreachable.

    Hi,
    I am not able to login in NWDS in the track created in the DTr or DC perpective.I am getting the error as:
    DTR Server  is unreachable.
    Please suggest.Its urgent.
    Regards,
    Rajani

    if you run http://<server>:<port>/ if that does not give a web page then thats a fair indication your system is either still starting or is in trouble. As NWDI takes a couple of minutesmax to start the applications (as opposed to a portal)  then I would expect a return on this fairly soon after startup.
    It may be that the URL/Port is wrong or there are connection issues.
    You can use the stand alone log viewer or the log viewer in visual administrator to look at the dtr logs and the default.trc logs also for issues but a restart first is always good.

  • How to create DTR server, first steps...

    Hello,
    I would like to start using the DT feature.
    I see that when I create new Client at my NWDS I am being asked to enter the DRT Server URL. Does this comes with the portal installation (I am using NW 04 SP 11) or should I install it separately? Can anyone please give me "first steps" towards the DT?
    10X,
    Roy

    Ok, here is the info about the plug-in.
    +
    Using the DTR Administrator Plug-In
    Use
    The DTR administrator plug-in is an enhancement of the DTR Eclipse client. It allows you to comfortably execute administrative tasks in the DTR.
    ·        Maintaining the user authorizations for DTR resources
    ·        Integrating activities
    ·        Displaying technical properties
    ·        Creating workspace folders
    ·        Creating workspaces
    ·        Creating folders
    You can execute several of these tasks, such as creating workspaces and workspace folders or integrating activities, also in the command line client of the DTR.
    Prerequisites
    ·        The user has administrator rights for the respective DTR server.
    ·        The DTR administrator plug-in is installed and activated:
    Maintaining the User Authorizations for DTR Resources
           1.      Open the context menu for the DTR resource (for example, in one of these views: Repository Browser, Open Activities, Activation View, Closed Activities, etc.)
           2.      Choose View Permissions.
    The Permissions view appears.
    For more information, see User Authentication and Authorization.
    Integrating Activities
           1.      Open the DTR view Closed Activities.
           2.      Select one or more activities.
           3.      Open the context menu and choose Integrate to...
    A dialog window appears.
           4.      Select the target workspaces.
           5.      Confirm with OK.
    Displaying Technical Properties
           1.      Open the context menu for the DTR resource (for example, in one of these views: Repository Browser, Open Activities, Activation View, Closed Activities, etc.) and choose Technical Properties.
    Creating Workspace Folders
           1.      Open the context menu of the DTR root node or the workspace folder node (for example, in view Repository Browser) and choose Create Workspace.
    For this action, no activity is required.
    Creating Workspaces
           1.      Open the context menu of the DTR root node or the workspace folder node (for example, in view Repository Browser) and choose Create Workspace.
    For this action, no activity is required.
    Creating Folders
           1.      Open the context menu of the workspace node (for example, in view Repository Browser) and choose Create Folder.
    For this action, no activity is required.
    +
    Regards,
    Rich Heilman

  • ICal invite replies Use Wrong Outgoing Server

    Hi There,
    I have 3 e-mail accounts in Mail.
    When someone sends me an invite it goes into iCal no problem. If I try to reply to the invite through iCal then it works ok on 2 of the e-mail accounts but not on 1.
    i.e. If someone sent the invite to account 1 it is ok.
    If they send it to account 2 it is ok
    but account 3 is the problem.
    With account 3 I get a pop-up message from Mail telling me "Cannot send message using the server xxxxx". The server to which it is referring is the server to be used for one of the other accounts.
    It won't even work if I select another server from the list.
    Any ideas?
    powerBook G4   Mac OS X (10.4.3)  

    Thanks for your help.
    I'm not entirely sure I understood your instructions though.
    I went into Mail preferences and went to the accounts section. I clicked on the Outgoing Mail Server (SMTP) drop down box and then went to 'edit server list'.
    From here I was able to delete 2 servers that I do not use and the other 3 servers listed were listed against the correct e-mail addresses and accounts.
    I then send an e-mail from each of the accounts to make sure I had it all set up right and each e-mail account sent and e-mail and received an e-mail without a problem.
    Then I went back to iCal to accept an invite and it tried to send it using the wrong outgoing server for that e-mail account and I had the same problems as normal.
    Any other ideas?

  • Server 2008 DHCP is handing out the wrong DNS server.

    We have two new 2008 DC that handles, DNS, DHCP and WINS. Our DHCP scopes have been migrated to these servers. We are seeing some random issues where clients are using the new dhcp server but the old dns server information is listed for the some systems. We discover this by using network monitor on the old DC, DNS, DHCP server.  Once the client performs a ipconfig /renew, the problem is corrected. Any ideas?

    Hi BrianAuH20,
    Thank you for posting here.
    Based on your description, I understand that your Windows 2008 DHCP server hands out the wrong DNS server address.
    To troubleshoot this issue, please perform the follow steps to see whether the clients retrieve the right DNS server address.
    1.     Temporarily make the old DC, DNS, DHCP server offline.
    2.     Check the new 2008 DHCP server setting.
                          i.        In the DHCP console tree, under Scope [172.16.0.0] SS Scope, right-click Scope Options, and then click Configure Options.
                         ii.        On the Advanced tab, verify that Default User Class is selected next to User class.
                        iii.        Select the 006 DNS Servers check box, in IP Address, under Data entry, type DNS Server IP address, and then click Add.
                        iv.        Select the 015 DNS Domain Name check box, in String value, under Data entry, type your domain's FQDN name, and then click OK.
    3.     Restart the DHCP service.
    For more information, you may refer to:
    http://technet.microsoft.com/en-us/library/ee404786(WS.10).aspx
    Hope this helps.
    Sincerely,
    Wilson Jia
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • What is the wrong with my select query

    HI All,
    TYPES: BEGIN OF t_equi,
             equnr          TYPE equi-equnr,
             aedat          TYPE equi-aedat,
             matnr          TYPE equi-matnr,
             sernr          TYPE equi-sernr,
             kunde          TYPE equi-kunde,
             zzreg_date     TYPE equi-zzreg_date,
             zzin_indic     TYPE equi-zzin_indic,
             zzinvoice_num  TYPE equi-zzinvoice_num,
             zzinvoice_date TYPE equi-zzinvoice_date,
             kund1          TYPE equz-kund1,
          END OF t_equi,
    DATA: it_equi        TYPE TABLE OF t_equi,
      SELECT equnr
             aedat
             matnr
             sernr
             kunde          "Ship to
             zzreg_date
             zzin_indic
             zzinvoice_num
             zzinvoice_date
             kund1            "Sold to
             INTO TABLE it_equi
             FROM equi AS a
             INNER JOIN equz AS b
             ON a~equnr = b~equnr
             WHERE a~equnr      IN s_equnr AND
    *               aedat GE gv_rdate AND
                   a~matnr      IN s_matnr AND
                   a~sernr      IN s_sernr AND
                   a~kunde      IN r_shpbr_kunde AND
                   a~zzin_indic IN s_indic  AND
                   b~datbi      EQ c_datbi  AND 
                   b~kund1     IN r_sldbr_kund1 .
    what is the wrong with this select query.. ?
    its giving me error  "The column name "EQUNR" is unclear ."
    Thanks

    Hi ,
    write  tablename or alias in select also
    SELECT a~equnr and check.
    Regards

  • What's wrong with my select?

    Hi! What's wrong with my select? The message I got is:
    "("has no closing ")"
    SELECT SINGLE iclclaim~claim
         INTO os_namir_stabi-claim
         FROM ( ( iclclaim
        INNER JOIN iclpoloau
          ON iclpoloauclaim = iclclaimclaim
        CLIENT specified
         WHERE iclclaim~client   = c_client1
         AND   iclpoloau~client   = c_client1
         AND iclpoloau~plateno = is_namir_stabi-plateno
         AND iclclaim~dateloss = is_namir_stabi-dateloss )
         INNER JOIN iclpartocc
          ON iclpartoccclaim = iclpoloauclaim
        CLIENT specified
         WHERE iclpartocc~client   = c_client1
           AND iclpartocc~bpartner = gv_bpartner ) .

    Please try it like this.  I'm pretty sure that you can not format your inner join with multiple where clauses.
    SELECT SINGLE iclclaim~claim
    INTO os_namir_stabi-claim
    FROM  iclclaim
          INNER JOIN iclpoloau
            ON iclpoloau~claim = iclclaim~claim
         INNER JOIN iclpartocc
            ON iclpartocc~claim = iclpoloau~claim
         WHERE iclclaim~client = c_client1
           AND iclclaim~dateloss = is_namir_stabi-dateloss
           AND iclpoloau~client = c_client1
           AND iclpoloau~plateno = is_namir_stabi-plateno
           and iclpartocc~client = c_client1
           AND iclpartocc~bpartner = gv_bpartner  .
    Regards,
    Rich Heilman

  • Insert into all tables on a Database on Test Server select from all tables on a database A from production server

     
    hi Friends ,i need a suggestion from  you on how to
    insert data to all tables on a Database  "A " on Test server
    Select data from all tables on  a Database  "A" on Production Server
    where id=123
    Database A is same with Structures on Test and Production also all Tables  will have  Id column in common.
    The purpose of this insert is ,as we all know Production has the latest data and i need to push to test server on request for particular ID only  ( may be weekly once or  twice a week )
    I  have a linked server setup name "LINQ" 
    Example for one table is below , like wise i need a script which does for 154 tables.
    Insert into ABC( id, name)---insert to test server
    Select Id, name  from  LINQ.ProdSerevrname.databasename.ABC where id = 123
    Please help me ..
    Thanks

    Why not use export import wizard for this if you've read access to production?
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • My mail send defaults to wrong mail server. How do I change it?

    My mail send defaults to wrong mail server. How do I change it?

    That was a long time ago. I don't even remember asking the question. I don't have that trouble at the moment.

  • DTR server and J2EE restart

    Our J2EE server is not starting due to following error :
    Severe error in network I/O of centralserver. Please restart DTR server application. If the problem occurs again, please refer to SAP note 774339 for more details on how to analyse the error condition
    we want to restart DTR server.
    since J2ee engine is not started, we are not able to logon to Visual Admin.
    can anyone tell me about any other way to restart the DTR server.
    or
    else how to start j2ee engine for above error.
    appropriate points will be awarded.
    thanks and regards,
    Aditya Deshpande

    Double post: DTR server problem
    Please continue in the other thread.

  • Build server is unreachable, DTR server is unreachable

    Hi experts,
    I have configured NWDI succesfully and created tracks also.
    When I tried to login in NWDS in Development Configurations perspective it is giving the following error.
    Build server http://<hostname>:50000 unreachable
    DTR server http://<hostname>:50000 unreachable.
    Thanks
    Vardhan

    Harsha,
    That is different reason.
    In our case, the server was http://FQDN:5XX100
    XX is the instance name in which the J2EE Engine is installed.
    Unreachable means the port is not opened.
    Check the ip and the message server port are available for use.
    The same problem was faced by us.
    Regards
    Kaushik Banerjee

  • Authorisation object to disable server selection in SM36

    Hi All,
    Is it possible to disable server selection(Execution Target) in SM36 Tcode if so ,what is the authorisation object for it??.This is as part of the preparation where we want to make specific Batch server so for all the batch jobs the default server should be only one.
    Also somehow SM36 auth was given to users and the jobs are being executed on central instance which we want to restrict ,so want to disable the server selection field in SM36.
    Thanks

    Hi,
    You can make the field- Exec Target invisible by creating a transaction variant for SM36 via SHD0 and then give access to users to the variant transaction thus restricting users from selecting the central instance to execute their jobs.
    Thanks
    Sandipan

  • How to start working on DRT, Create DTR server?

    hi friends
    i am working individually, now i want to migrate to work centrally with other developer team. please suggest me the steps to do this?
    like creating DTR server, creating user, asigning role to user etc.??
    thanks
    Narpal Singh

    check this link
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b2b146-5776-2910-4a8f-9b3190eab060
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/628a9f93-0701-0010-48bb-b0d872345c15
    regards
    Krishna

  • License Server Selection

    Hi all,
    On one install every time start SAP the license server selection screen pops up and we have to type the server name in there?
    Why ?
    Regards,
    MB

    Hi Matthew.......
    I guess this problem is associated with domain.....
    Please check this file under this path.......
    C:\Windows\System32\drivers\etc
    Open Host file in notepad and register your Server IP with its Name.......
    And then restart and try to login........
    Regards,
    Rahul

Maybe you are looking for