Wrong Effective Date
I am trying to process a LE in the past but when I process it and try to enroll into benefits it gives an effective date of today (system date). I had previously voided out the LE and re-added it on the same day. The notified, occurred and processed date are the same but when I complete the process it says my start/enrollment/effective date is still defaulting to the system date.
Any suggestions or reasons why this occurs? How can I change it so that I can enroll on the occurred date?
Edited by: 939545 on Aug 14, 2012 10:56 AM
Hi,
This is not the right forum for your Query. Post the same to forums.oracle.com/forums/forum.jspa?forumID=33.
Regards,
Gyan
Similar Messages
-
What is the Difference Between Sys Date and Effective Date ??
Hi Gurus,
Can any one pls let me know What is the Difference Between Sys Date and Effective Date ??
with regards
User600722EFFECTIVE DATE usually refers to a date-tracked record (although not exclusively).
Date-tracked records in Oracle HR have an EFFECTIVE START DATE and an EFFECTIVE END DATE. The record is 'EFFECTIVE' between these dates. In reports, you often use SYSDATE to compare to these two dates to find the CURRENT effective record, e.g. SYSDATE BETWEEN EFFECTIVE START DATE AND EFFECTIVE END DATE.
When you make changes to a HR record, you can choose between DATE TRACKING options, such as CORRECT or UPDATE (there are others too). CORRECT will overwrite the record and replace the data with your changes. This is normally used when you need to correct something that is wrong. UPDATE will create a new version of the record from the EFFECTIVE START DATE you choose. It will also set the EFFECTIVE END DATE of the previous record to the day before your new record's EFFECTIVE START DATE. That enables a history of records to be maintained so you can see what your data looked like at ay one point in time.
Regards
Tim
Edited by: TimW on Sep 23, 2008 2:37 PM -
My Apple ID was changed. It works fine on my IPad mini, my MAc and in Itunes Store, Yet when I try to update apps on my IPAD 1 I am asked to enter a password for the old ID user name which appears in the pop up window. When It still askes for the wrong ID data. I have uodated it in settings, and I have logged ontht the account to verify that it still works properly and it does. I reboot the IPAD and then attempt to update apps again but it still asked for the Old ID password and still shows the old ID username. The dame thing refuses to recognize my new Apple ID data. This is making my older IPAD unuseable.
You cannot change your Apple ID. You can get a new one if you want, but all of your Apps and media are linked to yoru old Apple ID. And no, Apple won't transfer your old ID purchases to yoru new ID.
-
Please let me know the table and field for the Effective date the employee moved into the job
LisaHi Lisa,
the fileds BEGDA and ENDDA represent the Effective date and end date of the EE assigned to the Job
Thanks
Cheera -
How to create a filter based on Effective date EFFDT
Hello to all,
I am currently creating reports from an HR database that stores records by employee (EMPLID) based on effective date(EFFDT) and Effective Sequence (EFFSEQ).
It is easy to get a report that shows all entries up to a certain data (using <= or >=), however, I am not able to create a Filter (in the report or in the prompt)
that shows me the MAX(EFFDT) up to a certain data dd/mm/yyyy. (any one)
The sql script we use is the follwiing
SELECT A.EFFDT, A.EFFSEQ, A.ACTION, A.EMPL_CLASS, *
FROM PS_JOB A
WHERE A.EMPLID=' ' ----*(PROMPT1)*
AND A.EFFDT=(SELECT MAX(B.EFFDT) FROM PS_JOB B
WHERE B.EMPLID=A.EMPLID
AND B.EFFDT<=' ') *(PROMPT2)*
AND A.EFFSEQ=(SELECT MAX(B.EFFSEQ) FROM PS_JOB B
WHERE B.EMPLID=A.EMPLID
AND B.EFFDT=A.EFFDT)
Do I need to create a variable? If yes, How?
Please send me your suggestions or past experiences with BI on the subject.
Thanks
RobertoHi Roberto,
I would create a session variable via the Oracle BI Administration Tool.
See the following of how to achieve this:
http://download.oracle.com/docs/cd/E12096_01/books/admintool/admintool_Variables4.html
Reference this variable in your filter. It looks something like this VALUEOF(NQ_SESSION."VARIABLE_NAME")
Good Luck,
Daan Bakboord -
Windows 8.1/Server 2012 R2 Exams - EFFECTIVE DATE ADJUSTED!
Hi, everyone.
Microsoft has adjusted the effective starting date of when the Windows 8.0 exams and Windows Server 2012 exams will be updated to Windows 8.1 and Windows Server 2012 R2 at Prometric.
The new effective date is January 28, 2014.
This means that current study materials for many of these exams remain current. You have a little extra time to pass these exams before they are updated.
Which exams specifically? Other questions? Learn more or ask questions at the following blog entry:
http://borntolearn.mslearn.net/btl/b/weblog/archive/2014/01/09/mcsa-windows-8-and-mcsa-windows-server-2012-exams-to-be-updated-january-28-2014.aspx
Good luck!
Best wishes, Davin MickelsonHi, Ken.
Unfortunately, this exam will be updated on January 28th, 2012 to Windows Server 2012 R2 and Windows 8.1.
It's too bad that Microsoft did not update the 70-417 exam description to tell you that. I know they
did update the exam descriptions for the other core exams, like 70-410.
70-410
http://www.microsoft.com/learning/en-us/exam-70-410.aspx
70-417 UPGRADE
http://www.microsoft.com/learning/en-us/exam-70-417.aspx
You have three painful choices:
Just take it anyway. Know that only some of the exam questions were updated. You can also learn what they are testing you for on the exam. You may even get lucky and still pass. You do have four (4) days to cram.
Reschedule the exam while paying that $35 reschedule fee.
Cancel the exam.
New study books will be released this spring. Here is the list from O'Reilly:
http://search.oreilly.com/?q=%22Server+2012+R2%22+exam&x=9&y=15
Sorry that Microsoft didn't update the exam's description. That's why I had the post turned into a sticky.
Good luck with your decision and with your exams.
Best wishes, Davin Mickelson -
GL Trial Balance Report with Effective Dates as Parameters
We have a requirement to show the GL Trial Balance report with Effective dates as Parameters.
Current Analysis:
The Journals get updated with corresponding CCID in GL_BALANCES table when the Journal is posted. GL_BALANCE is SOB specific, if the SOB has month as period then the balances in GL_BALANCES would get updated against the month(period).
To overcome the period problem, we explored the option of using a View based on GL_JE_HEADERS and GL_JE_LINES for 'Posted' Journal Batches of a SOB. We are checking whether the GL_JE_HEADERS.default_effective_date lies between the :p_from_date and :p_to_date which is sent to the Report as a parameter. The above idea does not return expected data when the custom Trial Balance Report is run.
Following is the Query being used:
SELECT cc.segment4 ACCOUNT, bal.code_combination_id,
bal.begin_balance_dr
+ SUM (NVL (gljel.accounted_dr, 0)) opening_bal_dr,
bal.begin_balance_cr
+ SUM (NVL (gljel.accounted_cr, 0)) opening_bal_cr,
ffv.description,
(SELECT SUM (NVL (gljel.accounted_dr, 0))
FROM gl_je_headers gljeh,
gl_je_lines gljel,
gl_code_combinations gcc
WHERE gljeh.default_effective_date BETWEEN :p_from_date
AND :p_to_date
AND gljeh.je_header_id = gljel.je_header_id
AND gljel.code_combination_id = gcc.code_combination_id
AND gljel.period_name = gljeh.period_name
AND gljel.set_of_books_id = :p_set_of_books_id
AND gljeh.status = 'P'
AND gljel.status = 'P'
AND gljeh.actual_flag = 'A'
--AND gljel.code_combination_id =
-- bal.code_combination_id
AND gcc.segment4 = cc.segment4
GROUP BY gcc.segment4) c_dr,
(SELECT SUM (NVL (gljel.accounted_cr, 0))
FROM gl_je_headers gljeh,
gl_je_lines gljel,
gl_code_combinations gcc
WHERE gljeh.default_effective_date BETWEEN :p_from_date
AND :p_to_date
AND gljeh.je_header_id = gljel.je_header_id
AND gljel.period_name = gljeh.period_name
AND gljel.code_combination_id = gcc.code_combination_id
AND gljel.set_of_books_id = :p_set_of_books_id
AND gljeh.status = 'P'
AND gljel.status = 'P'
AND gljeh.actual_flag = 'A'
AND gcc.segment4 = cc.segment4
GROUP BY gcc.segment4) c_cr
FROM gl_period_statuses per,
gl_code_combinations cc,
gl_balances bal,
gl_je_headers gljeh,
gl_je_lines gljel,
fnd_flex_values_vl ffv,
fnd_flex_value_sets ffvs
WHERE cc.chart_of_accounts_id = :p_chart_of_accts_id
AND bal.currency_code = :p_currency
AND bal.actual_flag = 'A'
AND bal.period_name = per.period_name
AND cc.template_id IS NULL
AND cc.code_combination_id = bal.code_combination_id
AND per.set_of_books_id = :p_set_of_books_id
AND per.application_id = 101
AND :p_from_date BETWEEN per.start_date AND per.end_date
AND gljeh.period_name = per.period_name
AND gljeh.default_effective_date <= :p_from_date
AND gljeh.je_header_id = gljel.je_header_id
AND gljel.period_name = gljeh.period_name
AND gljel.set_of_books_id = :p_set_of_books_id
AND ffv.flex_value_set_id = ffvs.flex_value_set_id
AND ffvs.flex_value_set_name = 'JSWEL_ACCOUNT'
AND gljeh.status = 'P'
AND gljel.status = 'P'
AND cc.summary_flag = ffv.summary_flag
AND cc.segment4 = ffv.flex_value
AND gljeh.actual_flag = 'A'
AND gljel.code_combination_id = bal.code_combination_id
GROUP BY bal.begin_balance_dr,
bal.begin_balance_cr,
cc.segment4,
ffv.description,
bal.code_combination_id
Kindly suggest if I am missing anything. I am sure that the great guns here can help me out.
Thanks
Sumitsuggest to create customize TB report.
-
Inserting rows in cursor and breaking up when effect date matches
Hi
I have created a table cadreinc (empno varchar2(8), pay number(5), da number(5) , scale varchar2(11), effectdate date , flag varchar2(1)) with values as shown below.
04485816 12800 4200 09300-34800 1-Jan-2006 Y
04485816 13000 4200 09300-34800 1-Jul-2006 Y
04485816 13450 4600 09300-34800 27-Sep-2006 Y
04485816 13675 4600 09300-34800 1-Jul-2007 Y
04485816 14200 4600 09300-34800 1-Jul-2008 Y
04485816 14650 4600 09300-34800 1-Jul-2009 Y
I just want to manipulate data into another table by using this data and i want the result as
04485816 12800 4200 09300-34800 01-jan-2006
04485816 12800 4200 09300-34800 01-feb-2006
04485816 13000 4200 09300-34800 1-Jul-2006
04485816 13000 4200 09300-34800 1-aug-2006
like data reproduced on every month and get changes in value based on the effect date.
how to write pl sql program for this??
I have tried some what like
DECLARE
EMP VARCHAR2(8);
PAY NUMBER(5);
GP NUMBER(5);
SCALE VARCHAR2(11);
INC date;
PAD VARCHAR2(11);
FL VARCHAR2(1);
CURSOR A IS SELECT EMPNO,VIPAY,GRADEPAY,VISCALE,INCDATE,FLAG FROM CADREINC;
BEGIN
<<i_loop>> FOR I IN A LOOP
INC:=I.INCDATE;
FL:='Y';
<<j_loop>> FOR K IN 1..12 LOOP
INSERT INTO CADREFIX ( EMPNO,VIPAY,GRADEPAY,VISCALE,INCDATE) VALUES
(I.EMPNO,I.VIPAY,I.GRADEPAY,I.VISCALE,I.INCDATE);
I.incdate:=LAST_DAY(I.INCDATE)+1;
EXIT j_loop WHEN pay>i.vipay and inc=i.incdate and fl='Y';
--EXIT WHEN INC='01-JUL-2010';
END LOOP;
-- i.INCdate:=LAST_DAY(I.INCDATE)+1;
EXIT i_loop WHEN pay>i.vipay and inc=i.incdate and fl='Y' ;
END LOOP;
COMMIT;
END;
but unable to get the desired results. The pay comes for every 12 months instead of upto effect date.
Please help.Hi,
Welcome to the forum!
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
If you're asking about a DML statement, such as INSERT, the CREATE TABLE and INSERT statements should re-create the tables as they are before the DML, and the results will be the contents of the changed table(s) when everything is finished.
Always say which version of Oracle you're using.
See the forum FAQ {message:id=9360002}
Here's one way to do what you want in pure SQL. Since I don't have your table, I'll use scott.emp to show the way:
WITH data_by_month AS
SELECT TRUNC (hiredate, 'MONTH') AS hiremonth
, COUNT (*) AS cnt
FROM scott.emp
GROUP BY TRUNC (hiredate, 'MONTH')
, got_repeat_num AS
SELECT hiremonth, cnt
, MONTHS_BETWEEN ( LEAD (hiremonth) OVER (ORDER BY hiremonth)
, hiremonth
) AS repeat_num
FROM data_by_month
SELECT ADD_MONTHS ( r.hiremonth
, c.column_value - 1
) AS report_month
, cnt
FROM got_repeat_num r
CROSS JOIN TABLE ( CAST ( MULTISET ( SELECT LEVEL
FROM dual
CONNECT BY LEVEL <= r.repeat_num
AS sys.odcinumberlist
) c
ORDER BY report_month
;You can use a query like this in an INSERT or MERGE statement.
If you need to use PL/SQL, then you can use an INSERT or MERGE statement, with a sub-query like the one show above, in PL/SQL. -
How to control "To" Effective Date of Element Entry Screen in Assignment.
hi,
How do I Control the "To" Effective Date which is defaulted to 13th Apr 2007 in the Element Entry Screen of Assignment .When the screen is date tracked to
01-APR-2007 and running payroll for the Month of April 2007.
Navigation
People--->Enter---->Assignment---->Element Entry
RamIn addition to what Tim Mentioned it can also be depends on what date you attached this element to the employee
you might have attached this element on 13th Apr 2007 to this particular assignment
Regards
Ramesh Kumar S -
How to pull the job with the latest effective date in PSFT?
Hello,
I am running the PSFT 9.1.1 connector workforcefullsync.
I ran into a problem when the user has multiple job records. Each time that the user job is updated, a new job record is created. So, when the data comes from PSFT, for a user, we have multiple jobs records with different effective date (For example <EFFDT IsChanged="Y">1996-10-21</EFFDT>). OIM is only interested in the latest EFFDT.
Question 1: is it something that we can set on the PeopleSoft side, so that only the job with the highest EFFDT is sent to OIM?
Question 1b: is this is not easy to accomplish from the PSFT side, can I use transformation in the connector to only pull the job record with the highest effective date?
Question 2: if the EFFDT shows a date in the future (HR wants to disable a person in the future), does OIM ignore this change until the sysdate is after that EFFDT date?
Thanks
PS: workforcefullsync worked fine if the file contains only 1 job per employee. When the xml files contain multiple job records, I got the error:
ERROR QuartzWorkerThread-1 OIMCP.PSFTER - oracle.iam.connectors.psft.common.handler.impl.PSFTWorkForceSyncReconMessageHandlerImpl : handleMessage
ERROR QuartzWorkerThread-1 OIMCP.PSFTER - 1
ERROR QuartzWorkerThread-1 OIMCP.PSFTER - Description : 1
ERROR QuartzWorkerThread-1 OIMCP.PSFTER - java.lang.ArrayIndexOutOfBoundsException: 1
Edited by: user12049102 on Mar 22, 2010 12:06 PMHello,
When the PSFT team sends a message over to OIM to disable a user with today's date, the user got disabled fine in OIM. A reconciliation event is created.
When the PSFT team sends a message over to OIM to disable a user with a future date for EFFDT, let's say 3/31/2010, no reconciliation event was created.
Does OIM store this information somewhere so that it will process it later on?
It's a good thing that OIM does not disable the user who has an EFFDT in the future, but we don't want that record to be forgotten.
Please help.
Thanks -
Effective date for a Formulation row
Hi,
our customer manage in JDE the effective date for each formulation row.
I.e.: In a particular formulation a particular salt is valid from 1-gen-2013 to 1-feb-2013.
In the same formulation another salt is valid from 2-feb-2013 to 1-mar-2013.
Is there a way to handle this also in PLM4P? Are there other customer that have the same formula management?
I hope my question is clear.
Thanks and regards.
Stefano.Hi Stefano,
have you thought about using the Alternate Input Items to achieve this scenario? you can put description to clarify that the particular salt only available in certain amount of time. Hope this will be helpful.
Thanks,
Jessie -
Wrong Clearing date in F-03 Manual Clearing
wrong clearing date punched in F-03 Manual clearing .How to correct.
Hello,
You can't change clearing date after posting. You can reverse the clearing process and redo with correct date.
Thanks,
V V -
New employee with wrong hiring date - how to change?
Hi,
I've entered a new employee with a wrong hiring date and I don't know how to change it. Some employee date are easily changeable not the hiring date!?Hi Marko.
Go to t-code PA30, enter the personnel number of the employee whom you have hired.
At the top in the menu bar, select "UTILITIES" - "Change entry/leaving date".
It will take you to the screen - "Change Actions" - Change " Start date".
This will correct the hiring date of the employee.
Reward points, if helpful.
Regards,
Reema -
Outer join with effective date in peoplesoft query
Hi,
I'm trying to join two tables using outer join. Both tables are effective dated:
Dept_Tbl: dept_id, status, effdt
Tips_Tbl: dept_id, tips_id, effdt
Not all records in Dept_Tbl are in Tips_Tbl. I need to get all active depts and their most recent tips_id if they have one.
select a.dept_id, b.tips_id
from dept_tbl a, tips_tbl b
where a.status = 'Active'
and a.effdt =
(select max(a_ed.effdt) from dept_tbl a_ed
where a.dept_id = a_ed.dept_id
and a_ed.effdt <= SYSDATE)
and b.dept_id(+) = a.dept_id
and b.effdt =
(select max(b_ed.effdt) from tips_tbl b_ed
where b.dept_id = b_ed.dept_id
and b.tips_id = b_ed.tips_id
and b_ed.effdt <= SYSDATE)
The query only returns records that are in both tables.
Is there a way for outer join to work with effective dates?
Thanks in advance,
RegHere is an example of one solution. Note the use of NVL on both sides of the equal sign since both sides could be NULL in the case of the outer join
with dept_tbl as (select 1 dept_id, SYSDATE effdt FROM DUAL),
tips_tbl as (select 1 dept_id, NULL effdt FROM DUAL)
select a.effdt
from dept_tbl a,
tips_tbl b
where b.dept_id(+) = a.dept_id
and NVL(b.effdt, SYSDATE) = NVL((select max(b_ed.effdt)
from tips_tbl b_ed
where b.dept_id = b_ed.dept_id
and b_ed.effdt <= SYSDATE), SYSDATE);
EFFDT
5/7/2007 3:25:00 PM -
I have installed sudo version 1.6.9p5.
after the configuration, when i'm trying to sudo, i get the below error:
ld.so.1: sudo: fatal: /usr/local/lib/libintl.so.8: wrong ELF data format: ELFDATA2LSB
================================
background of the server is as :
# uname -a
SunOS buildman 5.10 Generic_147440-01 sun4u sparc SUNW,Sun-Fire-V440
# ldd /usr/local/bin/sudo
libpam.so.1 => /usr/lib/libpam.so.1
libdl.so.1 => /usr/lib/libdl.so.1
libintl.so.8 => /usr/local/lib/libintl.so.8 - wrong ELF data format: ELFDATA2LSB
libsocket.so.1 => /usr/lib/libsocket.so.1
libnsl.so.1 => /usr/lib/libnsl.so.1
libc.so.1 => /usr/lib/libc.so.1
libcmd.so.1 => /lib/libcmd.so.1
libmp.so.2 => /lib/libmp.so.2
libmd.so.1 => /lib/libmd.so.1
libscf.so.1 => /lib/libscf.so.1
libdoor.so.1 => /lib/libdoor.so.1
libuutil.so.1 => /lib/libuutil.so.1
libgen.so.1 => /lib/libgen.so.1
libm.so.2 => /lib/libm.so.2
/platform/SUNW,Sun-Fire-V440/lib/libc_psr.so.1
/platform/SUNW,Sun-Fire-V440/lib/libmd_psr.so.1
Please help.installed the libintl for sparc mc and it worked fine.. thanks for the help..
Maybe you are looking for
-
MIGO not working for Tolerance Limit
Hii I Have set a tolerance limit of 20%. I wanted to do MIGO in two steps. One for the actual quantity and second for the extra 20%. But it is showing error that PO doesnt contain items. Regards Rakesh.B.S
-
Pease help. White screen with a message on it that I don't understand!!
When I turned my ipod on today i got a white screen that says connect to your computer...Use iTunes to restore. THen it just dies. PLease help...
-
I'm off to the USA and want to take my UK powerbook G4. Do I need some sort of power/current adapter aswell as the standard socket adapter to use it safely?
-
My text boxes shift when exporting to PDF
I'm having an odd problem. I'm using a file that I've created and whenever I export my INDD file to PDF, some of my text boxes shift and rotate. As you can see in the example below, my "language" box gets rotated 90º and pushed slightly left and off
-
can any one tell me /send me the procedure to extract FI data sources data to BI/BW. HOW TO CREATE FI DATA SOURCES. I WANT STEPS WHAT R THE PROCEDURES to analyze business requirements, leverage pre-existing SAP BI content, and to design best pract