Wrong face being shown in smart album

This is using iphoto on mac
Why does wrong face get selected in smart album. 
My smart album is set to show faces that contain  "Griffiths"  but I don't want one person with same sir name to show.  I re name this persons face to  "Griffo" expecting him to now be omitted from album, but his face still shows up. What is going on here please ?
Thanks
George, UK

I rename this persons face to  "Griffo" expecting him to now be omitted from album, but his face still shows up.
Have you also changed the full name of the "Face" of the person to a different last name? You can do that in the Info panel.
Or add a second rule to your smart album:
Match all
Face contains "Griffith"
Face does not contain "Griffo".
Have you checked, if not one image in your Griffith Faces stack has been mislabelled?

Similar Messages

  • Firefighter Log Report-Wrong entries being shown

    Hi all,
    using SAP FF rel. 5.2 - VIRSANH 520_620 I encountered the same issues
    described in notes n°:
    - 1064911 Firefighter Log Report-Wrong entries being shown
    - 1152284 Firefighter Log Report-Wrong entries being shown with
    dates
    The solutions described in these notes are not valid for my SAP
    release:
    VIRSANH 520_620
    Does someone know if are available the same corrections for my SAP FF Rel.?
    Thanks in advance,
    Claudio Orsi

    Hi Claudio,
    Not sure if this helps any....
    We recently upgraded FF 5.2 (520_620) to current SP levels and experienced some issues with the reporting feature
    We utilize the reports through the NetWeaver interface and were not receiving correct results; this happened after we went from SP 3 to SP 4
    We have backed out the SP4 level to get back to "what was working"; we have an issue opened with SAP and they have identified our experience as a bug and plan on a fix with the next release scheduled for end of June
    Are you experiencing report issues using the NetWeaver interface or the backend report tools? What is the SP level you are at?
    This information on our experience may or may not be helpfull but anything can be of some value as long as it is mentioned
    Jerry Synoga
    Ryerson, Inc.
    630-758-2021

  • Wrong artwork being shown

    This is a rarity. Some songs display the wrong album artwork. I have checked with iTunes to make sure that there isn´t a problem or corruption there and there wasn´t.
    Obviously I don´t know how pervasive this problem is as I don´t stare at my iPod5 lovingly all day. Maybe I should

    The artwork was attached to songs in iTunes. When I saw the wrong artwork I made a note of the song and then checked with iTunes. The artwork is correct in iTunes. One thing I have not checked to see if the song file has multiple pieces of artwork....The next time I see an erroroneous picture I will make a note and check in iTunes.
    I am unsure about the randomness of the problem. I use my iPod when I am working or commuting and I haven´t checked each song as it is played. I did try to do that in the office yesterday and found that the problem is more extensive than I thought. What I haven´t tried is to go back to a problem song and see if the wrong artwork is still being shown.

  • Music videos being shown within the album list

    is it just me, or are music videos now being shown within the music section as well ?
    for example.
    a video for a single is correctly being shown in the "music videos" section within "my music".
    however when i go into "my music" > "artists" > "single" - it is showing the video in there along with the music tracks.
    now i'm pretty sure that they weren't being shown there before, but they are now and it makes is confusing when looking for play 1 track and it is now listed twice, 1 track and 1 video.

    They have always been there on mine, same as Front Row on my Mac. The thing that bugs me is they are listed as 'Unknown Album' unless you assign an album name for the video track. This is true for all the music vids from iTunes. It doesn't look very professional. I might just add the album name 'Video' to them all so it looks a bit better.

  • Wrong date format when setting Smart Album

    I've got my date format set to the standard UK settings, eg. DD/MM/YY, but in Aperture when I create a smart folder the date settings are in the US format of MM/DD/YY. Is there anyway I can fix this - I've got System Preferences correctly set to UK formats.

    bilbo_baggins wrote:
    I've got my date format set to the standard UK settings, eg. DD/MM/YY, but in Aperture when I create a smart folder the date settings are in the US format of MM/DD/YY. Is there anyway I can fix this - I've got System Preferences correctly set to UK formats.
    There are folders and there are smart albums but I don't believe there are 'smart folders'.
    If you could describe a bit of what you are doing to would be helpful in trying to answer your question.

  • Smart albums not working with multiple faces

    I have a picture in an event tagged with 2 faces, Chase and Caleb.
    I setup a smart album with two criteria: 1) Face 'is' Chase, and 2) Face 'is not' Caleb.
    My smart album includes the photo above, but it shouldn't since I have specified that I want Caleb's face excluded.
    What am I doing wrong?

    But you've also specified that you do want Chase.
    So you've said the iPhoto: Do show me this pic and as well as that, Don't show me this pic.
    Is it set to match 'All' the criteria or 'Any'?
    Regards
    TD

  • IPhoto 8.1.2 can you create a smart album with only one face

    I'm using iPhoto 8.1.2 and have about 23k photos in the library. I have identified 32 key faces, and would now like to create some smart albums that contain only the face or faces that I want and to exclude all the others.  S for example  a smart album that has only my son.
    I tried using the doesn't contain this face, but you can only have around 10 filters/critiria in a smart album.
    any suggestions are appriciated

    You can't really, because you can't exclude enough of the faces.
    I would keyword the preferred images as well, so finding the face and the keyword would find the pics of the person alone.
    Regards
    TD

  • How do I make a smart album with ONLY pictures of a face with no one else?

    I'm not handy with logic so if this is simple, I apologize. I'm trying to make an album of pics of my girlfriend. So I do a smart album and it comes up with her pics. But what I WANT is only the photos where she's in them with no one else tagged. How do I do that?

    Do not think is is possible unless you add face is not every other face
    suggest to Apple - iPhoto menu ==> provide iPhoto feedback
    LN

  • Smart Album  to show pics with no faces, & any photos that iPhoto no faceID

    Hi, I've just started to use iPhoto 09, after a long long time getting to know my iMac, and organising my iTunes library...
    I want a smart album to show photos which have no faces, but also to have photos which iPhoto has not picked up that a photo needs a "face ID" on, what I mean is, if a person is turned away to to the side, iPhoto might not pick up that it needs to be a "face" and so wont show up in the normal smart album Photo>is>unnamed
    if anyone can help, would be great, I'm busy slowly importing my photos, and what to do this one step at a time
    cheers

    A smart album with the criteria "Face is unnamed" will find any photo with an unnamed face on it. It can be either one with a named face or two but at least one unnamed face or a photo with no faces named.
    There is workaround to get what you want.
    1 - add a keyword, face, to any photo you name a face in.
    2 - create a smart album with the criteria "Keyword is not face".
    This will identify any photo with no face at all. If you've not added any other keywords to photos you can create the smart album above and then sort by keyword. Those with both a face and unnamed face will have the keyword face and can be sorted to the top or bottom of the list.

  • Create smart album with ONLY some faces

    Hi. I need some help here. I created a smart album and I want it to have photos where only my girlfriend and I appear. I put two conditions: Face-is-my_name, and Face-is-mygirlfriend'sname. The problem is that it creates the album but it also contains photos where we and someone else appears, not only the two of us. Is there any way I can get it done?
    Thanks for your posts.

    Yes, I said to meet ALL conditions, and my smart album is in fact just like you said, with photos that have both of us but also other people.
    But I get it, the only way to exclude other people is specifically by name. I just wanted to know if there was another "more automatic" way. Thanks a lot LarryHN.

  • Smart Album errors detecting photos w/ missing faces

    I created a smart album (Faces is "unnamed") to find photos with missing faces. I went through and identified each of the photos. As I did this, as soon as I put in the name, many (but not all) disappeared from the album.
    However, the Smart Album still has a number of photos, even though there are no unidentified images. I checked each one to see if there were small boxes that I missed, but there weren't.
    I deleted the album and set up a new smart album (with the same criteria) and the images still appear in the album.
    Is there any way to make my smart album smarter? (remove a plist???)
    Thanks!

    .  "Affe".  I have a face named "Sculpture".
    I was quite impressed that Aperture's Face Recognition recognizeed the baboon's face.
    I have some nice tagged sculptures too.
    And some of the more cheeky suggestion by Aperture I named "Funny Face", for example - where does Aperture see a Face here in the bottom part of the picture?

  • IOS photo app vs iPhoto, keywords, smart albums, face detection?

    greetings,
    i have some questions about iOS photos app in comparison to iPhoto (in 10.8).  i've done a little searching on the web and in the forum, but didn't see this covered...
    i always sync my iPhone to my mac, copy/import my photos to iPhoto, and use iPhoto to organize my photos.  in iPhoto, i tag photos (keywords) and use "smart albums" to access all my photos based upon the keyword tags.  face detection in iPhoto is GREAT!.   i have all my friends faces named and finding them by "people" grouping is fantastic.  the down side to all of this is that i have everything working great on my mac, but usually i'm using the photos app in the iPhone to show pics to my friends since that is what i have with me.  i'm not sure if this information in iPhoto ever gets synced back to my iPhone. 
    1- does the iOS photos app have any of these features from iPhoto? 
         in other words, can i tag photos, lable the faces of friends, set up smart albums in iOS photos?  if so, please point me to some info.  i haven't seen an obvious way to do any of this. 
    2- can i sync what i do in iPhoto back to my iPhone?
         in other words, can i get the tags, peoples' names on their faces, and smart albums copied from iPhotos back to my iPhone?  is there some setting or command in iPhoto, or somewhere else?
    3- i just turned on photostream.  can/does this iPhoto data transfer via photostream to the iPhone?
    i have an iPhone 4.
    i am just about ready to upgrade from iOS 5 to iOS 6.  so if any of these features are specific to iOS 6, please let me know. 
    i'd appreciate it if you could mention if there is anything special about iOS in the iPad, because a friend has asked me how she can do in her iPad (iOS 6), what i do with iPhoto in my mac. 
    thank you for any suggestions or advice. 

    You're best bet would be to do your own comparison: https://itunes.apple.com/us/app/iphoto/id497786065?mt=8
    https://itunes.apple.com/us/app/iphoto/id408981381?mt=12

  • Bug with Smart Albums, Faces & Places.

    I have recently got married, and we have got a good few hundred photos added into iPhoto (for a total of a few thousand). And we've spent a good while making sure that everybody is tagged correctly in Faces and all the Places are correct.
    My wife has then asked me for all of the photos with her and her grandma. Easy; I create a Smart Album with Match all of the following conditions: Face is "Clair" and Face is "Granny". I end up with a few dozen photos containing both of them.
    Then she asks if we can just look at those which have both of them at the wedding reception. So I simply added an extra condition to the smart album of Place is "Reception". But instead of getting a handful of photos -- a subset of the previous album, as expected -- I end up with a few hundred pictures! This modified album is taking all those pictures which are at the correct place, but now have either Clair's or her grandmother's face in them.
    Is there something obvious I've overlooked, or is this a genuine bug?
    Thank You,
    Warren Merrifield
    Message was edited by: wmerrifield

    I set it to "all", in both cases. If it's set to "any", I get even more results (all the pictures from the venue, regardless of who is is them plus all those with Clair in and all of those with her gran in).

  • Smart Album; unnamed face always has 1 person

    Hi,
    I set up a smart album with 1 condition: Face is unnamed
    There is always one photo stuck in there after the others are named.
    It has 1 name associated with it.
    As far as I can tell, there are no additional unnamed faces.
    So why does it always show?
    Cheers, James

    Old Toad wrote:
    Has that one photo been edited at any time?  If so do a Revert to Original on it and check the smart album again.
    It had. When I reverted to original image, I could see another face which I was able to remove.
    Now I just need to re-apply the edits.
    Many thanks!

  • Smart Album with Unnamed Faces

    Hi - I created a smart album containing all images with unnamed faces (using the "Face: is unnamed" filter), which I found useful for editing people's names. It had been working, but the folder now contains nothing even though I still have lots of images with unnamed faces. Tried deleting the old and creating a new smart album, quit and restarted Aperture a few times, and repaired the library, but still doesn't work. Any suggestions?
    Cheers,
    Peter O.

    Not perfect, but better than nothing...
    I created a Smart Album with a rule set that says "Must match All" and then five rules:
    Face does not include a
    Face does not include e
    Face does not include i
    Face does not include o
    Face does not include u
    The album includes all pics with unnamed faces, but also all pics with no faces (e.g., landscapes).  I then scan thru looking for faces I want to name.
    I also submitted a request to restore the real feature, as Terence recommended.

Maybe you are looking for