Wrong file ending

I converted a .pdf ot Word but it saved it as a .docx and I wanted a .doc. I could not make it
save as a .doc. What did I do wonrg fir future reference?

I have raised a bug to track this.
https://bugs.eclipse.org/bugs/show_bug.cgi?id=72725
-Andrew
"Fabi" <[email protected]> wrote in message
news:cgia5e$slv$[email protected]..
> Hi
>
> I couldn't find a single bug report with backslash, so I write here.
>
> I have some C code which I imported into an eclipse cdt project. The
> parser had a problem with macros that are continued like:
>
> #define mydef \
> some big value which needs a new line :)
>
> As I also use an old gcc 2.95.3 (cross-compiled with cygwin). I now got
> the same error as compile error (and not only indexer error). After
> looking on the internet I found that older gcc versions had a problem
> with this if the file had the wrong line ending convention (DOS/UNIX).
> So I just tried and converted my file from DOS to UNIX (although I'm
> working on Windows) and suddenly the parser was happy.
>
> The line ending may not be important in general, but in this case
> (macro continuation) there's a bug in the C parser which only works
> correctly with UNIX line endings.
>
> Thanks
>
> bye Fabi
>
>

Similar Messages

Itunes points to wrong files - points to random system files instead of mp3

I noticed this about a year and a half ago when my ipod would have an error that some of the files couldnt be transfrered. Upon further inspection, it seems itunes occasionally gets confused about where files are located. The files will look fine in itunes but wont play. If I right click on them and chose "show in finder" the file that should be an mp3 in my library, is actually pointed at ical/contents/resources/italian.Ipoj/iCal Help/gfx/priority.gif
Which is totally bonkers. It's a totally random operating file.
Now I could go in and delete and re-import these files. Eventually that is what I have ended up doing in the past. But now it's happened to about 700 files (out of about 18,000) and it would take a century for me to go through each track and find out which ones that has happened to.
I know there are some applescripts out there for missing and dead tracks, but I can't seem to find one that just checks that we're pointing to the CORRECT file. keep in mind, these correct files actually are where they are supposed to be. Itunes is just linking to the wrong files.
Message was edited by: James Campbell

I am experiencing the same problem and after restoring from backup I either still have some wrong pointers or the problem is returning.
One way to find out which tracks are pointing to random files is to sync your whole music library either in one go if it's small enough or in parts to an iphone or ipod. You will then get a dialog with all the files that won't play on the device.
How do I relink them manually? Can't work it out.

IPhone photo/video library glitch - wrong file extensions, name shift, lost files etc [LONG story - sorry]

I have a 5s running 7.0.4. and my computer is running Windows 8.1.
We had a baby and my phone filled up fast with pictures and videos, so I decided to offload them onto my PC. I connected my phone to the usb port, and directly copied from the DCIM folder to my hard drive.
Something happened during the first attempt, and the process was interrupted. So I went into each of the sub folders, and selected all files, and started the copy process again. I told the computer to skip any existing files.
So all the file counts matched in each folder, and I figured it was safe to start deleting from my iPhone.
On my hard drive, I separated all the MOV files into my Videos folder. But in Windows Explorer, the thumbnail view showed several MOV files with no thumbnail - just the generic icon.
As I sorted my photos into various folders, I also noticed a lot of generic icons instead of thumbnails for the JPGs. I started to feel concerned that my files had become corrupt during the transfer. But then I noticed a PNG file that was a few hundred megabytes. This was odd, so I added the MOV extension to it. Sure enough, it was a video with the wrong extension.
I renamed every PNG and JPG file that had no thumbnail to add the MOV extension. Every one was a video with the wrong file extension.
Then I went to the video folder, and all the MOV files that had the generic icon were actually JPG files.
Well I was just happy to see that the files were not corrupt.
One more time before I deleted things from my iPhone, I did a spot check to see that the largest videos were on my hard drive. I found a few videos that were not copied over, despite the file counts having been accurate. So I copied the videos again, and compared file sizes and date/times when there was an overwrite prompt. Most were matches, but several were the same file name with different sizes and dates.
I didn't know what was going on, but I just wanted to get the files on my computer. So I renamed my local copy where there was a name collision, and copied the videos. I deleted the videos from my phone as I went along.
I felt pretty confident that I had all the files copied now, so I began mass deleting my photos.
I went to the Photos app on the phone, and watched the thousands of pictures disappear, and the glorious free space grow on my phone.
But wait... there was still 1 video in the Photos app. I thought I had gotten all the MOV files off the phone...
I have a photo info app installed, so I was able to see the file name of the video. I searched for that file name in the DCIM subfolders, but the folder that had that series of files (the IMG_3000-3999 files) listed the files with that particular video skipped. It was clearly still on my phone, because I could play it.
Then I noticed it was a 45 minute long video of my baby. About 5 GB. So I figured it must be due to the file size that it wasn't visible from explorer. (Can't explain why that would be, but M$ keeps changing crap too. I never freaking know what to expect from them either.)
After having deleted all the jpg, png and mov files from the DCIM folder, there were still about 26 files in my camera roll on the iPhone. And I could still view the video.
I decided I wasn't concerned about the photos, I just wanted to figure out how to get the video onto my computer.
So I selected all the photos in the photo app (skipping the 1 remaining video) and tapped the trash can.
Poof! One item remained, and it was one of the garbage photos. My video is GONE! ^#@*&#($^@Q&%( And no, I didn't fat-finger it. I was very careful to select the correct thumbnails.
Looking back, I know that I should have just started the entire file copy process from scratch when funny stuff started happening like mismatched file names. But I am a sleep-deprived new mom and just wasn't thinking clearly. It would be nice if I could have used my file/directory compare program to check the iPhone against my laptop, but it is not compatible with devices, only removable drives.
And no, I don't use iTunes. I stopped using iTunes years ago when it would randomly decide to delete contacts from my phone just because they didn't exist on my computer or some sh-- like that. I have always just manually synced all my stuff and have never had an issue like this. To say I am sad to lose that video is an understatement.
I googled "iPhone undelete" and "iPhone data recovery" and downloaded a trial for one of the likely candidates. It turned up a bunch of garbage, but not my video.
Anyways... I am wondering if anyone else has experienced this type of scenario? Has anybody identified what could cause this to happen? I would like to avoid this in the future. (I will avoid this type of loss, because I know now what I could have done differently to be more careful. But it would be nice if I didn't have to get all neurotic about checking 60GB of photos/videos side by side each time I copy them to my computer...)
I have seen other threads on the forum here regarding corrupted libraries and such, but I am not sure this is the same thing.
One suspicion I have is that it might have to do with the iPhoto app being installed on the phone. I can't articulate why I think that is worth considering. But when I looked at my Video folder, I ended up with many duplicate videos, and all the duplicated videos' file names were 2 numbers apart. As if all the file names got shifted at some point. Very strange.
Thanks for listening to my rant. If anybody has an idea, I am interested. If anybody else has lost precious memories due to this, we should talk. If it is a widespread problem, maybe we can all get together and pound down Apple's door?
As an aside: Why am I unable to select Apple Support Community to post this question to?

In my case number of weird things happen whenever I try to copy pictures/videos from my iPhone from direct USB...
1. JPG files are wrongly named as MOV and vice versa.
2. I copy only folders but in addition files with no extension are copied in the main folder, very strange.
3. Whenever I open one of the folders, strange icons like this () start appearing which cannot be copied even.
Unfortunately I used to delete a lot of files with wrong extensions in the past because I never new they could be fixed.
Apple should answer this!
Note: I am using Windows 8.1 and use a direct USB cable without iTunes to copy the media files directly from My Computer.

I'm sorry AI choosse the wrong file

I'm sorry I choose the wrong file.
The error that I'm getting is this one:
Exception 'IOException' not caught or declared by 'void Lesson%.main(String[] args).
If I click the error and it take me to readLine() line, so I don't understand what happend.
Thanks
* LESSON FIVE
* @author JAIME TORRES
* @version 1.0
import java.io.* ;
class BadOpt extends Exception
public BadOpt( String option ) {}
public String BadOpt( String option )
if( option.equals("A") )
return(" Bad option: Caracas is the Capital of Venezuela") ;
if( option.equals("B") )
return(" Bad option: Santiago is the Capital of Chile" ) ;
else
return(" Bad option: Omaha is the bigest city in Nebraska" ) ;
class Lesson5
* Constructor
public Lesson5()
{} // empty
public static void main( String[] args)
String option = "D" ;
BufferedReader stdin = new BufferedReader( new InputStreamReader( System.in) ) ;
while( ! ( option.equals("E") ) )
try
System.out.println() ;
System.out.print("Please choose the correct answer:");
System.out.println() ;
System.out.println(" What is the capital of Colombia?" ) ;
System.out.println(" A. Caracas");
System.out.println(" B. Santiago");
System.out.println(" C. Omaha") ;
System.out.println(" D. Bogota");
System.out.println() ;
System.out.print("Your option is? " ) ;
option = stdin.readLine() ;
if( ! (option.equals("A")) )
throw (new BadOpt(option) );
catch ( BadOpt e )
System.out.println( e.BadOpt(option) ) ;
} // End catch block
} // End while loop
}

Hi,
The readLine() method can throw an IOException. You'll need to catch it as follows:
try
catch ( BadOpt e )
System.out.println( e.BadOpt(option) ) ;
catch ( IOException e )
System.out.println( e.getMessage() ) ;
}Hope this helps,
Kurt.

SAX-ContentHandler -characters methods gets wrong int end sometimes

Hi
I am having problems with SAX-ContentHandler -characters methods. It gets wrong int end values time to time ---means that it chops up my strings when it reads large XML files.
Is there any way to correct it? Any suggestions will be very helpful. Thank you.
My code is below.
public class MyContentHandlerDemo extends Thread implements ContentHandler{
private ArrayList hitList = new ArrayList(1000);
private ArrayList hitId = new ArrayList(1000);
private ArrayList hspNum = new ArrayList(1000);
private ArrayList hitLength = new ArrayList(1000);
private ArrayList queryFrom = new ArrayList(1000);
private ArrayList hspith = new ArrayList(1000);
private ArrayList idith = new ArrayList(1000);
private String localname;
private Locator locator;
private int know=1;
private int knowid=1;
private int knowlength=1;
private int knowhitlength=1;
private int knowhspnum=1;
private int knowhspnumadd=1;
private int knowhspnumlength=1;
private int knowquery=1;
private int knowqueryfrom=1;
private int processon =1;
private int processcount = 0;
private int hspithnum=0;
private int idithnum=0;
String allstr;
String addseq;
char [] allchar;
int icount=0;
int lengthsum=0;
public synchronized void setDocumentLocator(Locator locator) {
System.out.println(" * setDocumentLocator() called");
// We save this for later use if desired.
this.locator = locator;
public synchronized void startDocument() throws SAXException {
System.out.println("Parsing begins...");
public synchronized void endDocument() throws SAXException {
try {
FileOutputStream outputfileDemo;
PrintStream printoutDemo;
outputfileDemo= new FileOutputStream("apoe500.fasta");
printoutDemo=new PrintStream(outputfileDemo);
FileOutputStream reSaxfile;
PrintStream printoutReSax;
reSaxfile= new FileOutputStream("reSax.txt");
printoutReSax=new PrintStream(reSaxfile);
int m = hitList.size();
for (int k=0; k < m; k++) {
int comp = (((hitList.get(k)).toString()).length());
String strComp = Integer.toString(comp);
String hitleng = (hitLength.get(k)).toString();
if(strComp.compareTo(hitleng)!=0)
{System.out.println("Warning: Length is different at hit number (-1) " + hitId.get(k));}
for (int l=0; l < hspith.size(); l++){
printoutReSax.println((hspith.get(l)).toString());
outputfileDemo.close();
printoutDemo.close();
reSaxfile.close();
printoutReSax.close();
} catch (IOException e) {
System.out.println("IOException errors");
System.out.println("...Parsing ends.");
public synchronized void processingInstruction(String target, String data)
throws SAXException {
//System.out.println("PI: Target:" + target + " and Data:" + data);
public synchronized void startPrefixMapping(String prefix, String uri) {
//System.out.println("Mapping starts for prefix " + prefix +
// " mapped to URI " + uri);
public synchronized void endPrefixMapping(String prefix) {
//System.out.println("Mapping ends for prefix " + prefix);
public synchronized void startElement(String namespaceURI, String localName,
String rawName, Attributes atts)
throws SAXException {
localname =localName;
int which =100;
if (localname.equals("Hit_id")) {which = 0;}
if (localname.equals("Hsp_num")) {which = 1;}
if (localname.equals("Hsp_hseq")) {which = 2;}
if (localname.equals("Hsp_align-len")) {which =3;}
if (localname.equals("Hsp_query-from")) {which =4;}
switch (which){
case 0: knowid=0;
//icount=icount+1;
break;
case 1: knowhspnum=0;icount=icount+1;
break;
case 2: know=0; //icount=icount+1;
break;
case 3: knowlength=0; //icount=icount+1;
break;
case 4: knowquery=0; //icount=icount+1;
break;
default: knowid=1; know=1; knowlength=1; knowhspnum=1;knowhitlength=1;knowquery=1;
public synchronized void endElement(String namespaceURI, String localName,
String rawName)
throws SAXException {
//System.out.println("endElement: " + localName + "\n");
public synchronized void characters(char[] ch, int start, int end)
throws SAXException {
String s = new String(ch, start, end);
int process=100;
if (knowid==0) {process=0;}
if (knowhspnum==0){process=1;}
if (know==0) {process=2;}
if (knowlength==0) {process=3;}
if(knowquery==0){process=4;}
switch(process){
case 0:
idithnum = idithnum+1;
//int start1 = start;
//int end1 = end;
//char [] datahold1 = new char[end1];
//for (int i=0;i<end1;i++){
//datahold1=ch[start1+i];
//warn if the length is differernt
int n=s.length();
allchar = new char[n+1];
allchar[0] = '>';
for (int i=0; i<n; i++){
allchar[i+1]=s.charAt(i);
allstr = new String(allchar);
hitId.add(allstr);
knowid=1;
processon=1;
break;
case 1:
hspNum.add(s);
if ((s.compareTo(Integer.toString(1)))!=0){
String hspallstr = new String (allstr.concat(s));
hitId.add(hspallstr);
knowhspnum=1;
processon=1;
break;
case 2:
hitList.add(s);
know=1;
processon=1;
break;
case 3:
hitLength.add(s);
knowlength=1;
processon=1;
break;
case 4:
queryFrom.add(s);
knowquery=1;
processon=1;
break;
default: processon=0;
public synchronized void ignorableWhitespace(char[] ch, int start, int end)
throws SAXException {
String s = new String(ch, start, end);
public synchronized void skippedEntity(String name) throws SAXException {

I put some more codes in characters(). Then I got OutOfMemory: Java Heap Error.
I probably have to write something in startElement() to limit input for characters() method.
Could anyone help me? I need to limit inputs for charactes() in startElement().
I added some codes in characters() method
public synchronized void characters(char[] ch, int start, int end)
        throws SAXException {
        String s;
        StringBuffer stringbuf1;
        String finalstring1;
        int process=100;
        if (knowid==0) {process=0;}
        if (knowhspnum==0){process=1;}
        if (know==0) {process=2;}
        if (knowlength==0) {process=3;}
        if(knowquery==0){process=4;}
        switch(process){
        case 0:
        //s = new String(ch, start, end);
        idithnum = idithnum+1;
        //int start1 = start;
        //int end1 = end;
        //char [] datahold1 = new char[end1];
        stringbuf1 = new StringBuffer();
        while(ch!=null){
        stringbuf1.append(ch);
        finalstring1 = stringbuf1.toString();
        //warn if the length is differernt
        int n=finalstring1.length();
        allchar = new char[n+1];
        allchar[0] = '>';
        for (int i=0; i<n; i++){
        allchar[i+1]=finalstring1.charAt(i);
        allstr = new String(allchar);
        hitId.add(allstr);
        knowid=1;
        processon=1;
        break;
        case 1:
        //s = new String(ch, start, end);
        stringbuf1 = new StringBuffer();
        while(ch!=null){
        stringbuf1.append(ch);
        finalstring1 = stringbuf1.toString();
        hspNum.add(finalstring1);
        if ((finalstring1.compareTo(Integer.toString(1)))!=0){
        String hspallstr = new String (allstr.concat(finalstring1));
        hitId.add(hspallstr);
        //System.out.println(allstr);
        knowhspnum=1;
        processon=1;
        break;
        case 2:
        //s = new String(ch, start, end);
        //int lengthend=end;
        stringbuf1 = new StringBuffer();
        while(ch!=null){
        stringbuf1.append(ch);
        finalstring1 = stringbuf1.toString();
        checklength:
        while(know==0){
        if(lengthend!=new Integer((hitLength.get(hitLength.size()-1)).toString())){
        String s1=new String(ch, start, end);
        s = (((hitList.get((hitList.size())-1)).toString()).concat(s1));
        hitList.add(s);know=1;
        break;
        hitList.add(finalstring1);
        processon=1;
        break;
        case 3:
        //s = new String(ch, start, end);
        stringbuf1 = new StringBuffer();
        while(ch!=null){
        stringbuf1.append(ch);
        finalstring1 = stringbuf1.toString();
        hitLength.add(finalstring1);
        knowlength=1;
        processon=1;
        break;
        case 4:
        //s = new String(ch, start, end);
        stringbuf1 = new StringBuffer();
        while(ch!=null){
        stringbuf1.append(ch);
        finalstring1 = stringbuf1.toString();
        queryFrom.add(finalstring1);
        knowquery=1;
        processon=1;
        break;
        default: processon=0;

Mysql package installed the wrong file?

I had the same error as the guy in this thread:
http://bbs.archlinux.org/viewtopic.php?id=86653
Which he resolved (post #7) by copying the my.cnf to /etc/
I just ran:
cp /etc/mysql/my.cnf /etc/mysql/my.conf
And immediately my problem went away.
I thought most config files end in .conf and changing it to that made things work...
Is the mysql package just installing it wrong, or what?

Make sure you have the right version...
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

Backup MaxDB 7.6 mit HP Data Protector; Wrong file type

Hallo.
Wir versuchen, eine MaxDB-Datenbank (Rel. 7.6) auf SUSE-LINUX unter Verwendung von HP Data Protector zu sichern. Der Versuch, das Backup durchzuführen, schlägt fehl, da auf dem MaxDB-Server anscheinend die Pipe nicht angelegt werden kann. Folgende Meldung wird ausgegeben:
From: BSM-hph3000.thebis.de "Content_sdb_sdba" Time: 26.04.2008 10:19:16
      OB2BAR application on "dell2950.thebis.de" successfully started.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `user_logon'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `dbm_configset -raw set_variable_1 OB2OPTS="(null)"'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `dbm_configset -raw set_variable_2 OB2APPNAME=SDB'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `dbm_configset -raw set_variable_3 OB2BARHOSTNAME=dell2950.thebis.de'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `dbm_configset -raw set_variable_4 TimeoutWaitFiles=30'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `dbm_configset -raw BSI_ENV /usr/omni/tmp/SDB.bsi_env'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `medium_put BACKDP-Data[1]/1 /usr/omni/tmp/SDB.BACKDP-Data[1].1 PIPE DATA 0 8'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `util_connect'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `backup_start BACKDP-Data[1] DATA'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:23
      Error: SAPDB responded with:
      -24988,ERR_SQL: SQL error
      -903,Host file I/O error
      3,Data backup failed
      1,Backupmedium #1 (/usr/omni/tmp/SDB.BACKDP-Data[1].1) Wrong file type
      6,Backup error occured, Errorcode 3700 "hostfile_error"
      17,Servertask Info: because Error in backup task occured
      10,Job 1 (Backup / Restore Medium Task) WaitingT131 Result=3700
      6,Error in backup task occured, Errorcode 3700 "hostfile_error"
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:23
      Executing the dbmcli command: `exit'.
From: BSM-hph3000.thebis.de "Content_sdb_sdba" Time: 26.04.2008 10:19:18
      OB2BAR application on "dell2950.thebis.de" disconnected.
From: BSM-hph3000.thebis.de "Content_sdb_sdba" Time: 26.04.2008 10:19:18
      None of the Disk Agents completed successfully.
      Session has failed.
Ein Versuch, die Pipe /usr/omni/tmp/SDB.BACKDP-Data[1].1 manuell auf dem MaxDB-Server anzulegen, schlug ebenso fehl. Eine Pipe /usr/omni/tmp/SDB.BACKDP-Data kann angelegt werden.
Frage 1) Hat jemand ein ähnliches Problem und dazu eine Lösung?
Frage 2) Wo ist hinterlegt, welchen Medium-Name der Data Protector beim command "medium_put" verwenden soll?
Danke für Eure Hilfe!
Gruß
Gerhard Krauß
Heidelberg

Hi Marcus,
we use the version 5.5.
The pipe name is generated by the Data Protector. When I want to create manually a pipe with this name I got the message "No hit found".
Do you know a possibilty where we can configure (at Data Protector or MaxDB) which medium name should be used for creating the pipe?
Thanks a lot!
Gerhard

NullPointerException while uploading wrong file in af:inputfile

Hi All,
I am uploading excel sheet data into jspx Page(database table) by using af:inputFile.After uploading file af:inputFile need to be refresh.It is getting refresh for right file(excel file),but it is not refreshing for wrong file upload.
it showing following error.
UIComponent is null
ADF_FACES-60097:For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096:Server Exception during PPR, #2
i had refer frank's blog https://blogs.oracle.com/jdevotnharvest/entry/how_to_reset_adf_faces.
Could any one help on this!!
Thanks in advance!!

here is my jspx source code.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:f="http://java.sun.com/jsf/core"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich" xmlns:h="http://java.sun.com/jsf/html">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document title="ExcelToTable.jspx" id="d1">
<af:messages id="m1"/>
<af:form id="f1" usesUpload="true">
<af:pageTemplate viewId="/oracle/templates/threeColumnTemplate.jspx" id="pt1">
<f:facet name="center">
<af:panelSplitter id="ps1" orientation="vertical" splitterPosition="146">
<f:facet name="first">
<af:panelFormLayout id="pfl2">
<af:panelLabelAndMessage label="#{bindings.Deptno.hints.label}" id="plam1">
<af:outputText value="#{bindings.Deptno.inputValue}" id="ot1">
<af:convertNumber groupingUsed="false" pattern="#{bindings.Deptno.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.Dname.hints.label}" id="plam2">
<af:outputText value="#{bindings.Dname.inputValue}" id="ot2"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.Loc.hints.label}" id="plam3">
<af:outputText value="#{bindings.Loc.inputValue}" id="ot3"/>
</af:panelLabelAndMessage>
<f:facet name="footer">
<af:panelGroupLayout layout="vertical" id="pgl2">
<af:panelGroupLayout layout="horizontal" id="pgl3">
<f:facet name="separator">
<af:spacer width="10" height="1" id="s1"/>
</f:facet>
<af:commandButton actionListener="#{bindings.First.execute}"
text="First" disabled="#{!bindings.First.enabled}"
partialSubmit="true" id="cb1"/>
<af:commandButton actionListener="#{bindings.Previous.execute}"
text="Previous"
disabled="#{!bindings.Previous.enabled}"
partialSubmit="true" id="cb4"/>
<af:commandButton actionListener="#{bindings.Next.execute}" text="Next"
disabled="#{!bindings.Next.enabled}"
partialSubmit="true" id="cb5"/>
<af:commandButton actionListener="#{bindings.Last.execute}" text="Last"
disabled="#{!bindings.Last.enabled}"
partialSubmit="true" id="cb6"/>
</af:panelGroupLayout>
<af:commandButton text="Submit" id="cb7"/>
</af:panelGroupLayout>
</f:facet>
</af:panelFormLayout>
</f:facet>
<f:facet name="second">
<af:panelCollection id="pc1">
<f:facet name="menus"/>
<f:facet name="toolbar">
<af:toolbar id="t2">
<af:commandButton actionListener="#{bindings.CreateInsert.execute}"
text="InsertRow"
disabled="#{!bindings.CreateInsert.enabled}" id="cb2"
immediate="true"/>
<af:commandButton actionListener="#{bindings.Delete.execute}"
text="DeleteRow"
disabled="#{!bindings.Delete.enabled}" id="cb3"
immediate="true"/>
</af:toolbar>
</f:facet>
<f:facet name="statusbar"/>
<af:table value="#{bindings.EmpView3.collectionModel}" var="row"
rows="#{bindings.EmpView3.rangeSize}"
emptyText="#{bindings.EmpView3.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.EmpView3.rangeSize}" rowBandingInterval="0"
filterModel="#{bindings.EmpView3Query.queryDescriptor}"
queryListener="#{bindings.EmpView3Query.processQuery}"
filterVisible="true" varStatus="vs"
selectedRowKeys="#{bindings.EmpView3.collectionModel.selectedRow}"
selectionListener="#{bindings.EmpView3.collectionModel.makeCurrent}"
rowSelection="single" id="t1" partialTriggers="::cb2 ::cb3">
<af:column sortProperty="#{bindings.EmpView3.hints.Empno.name}"
filterable="true" sortable="true"
headerText="#{bindings.EmpView3.hints.Empno.label}" id="c1">
<af:inputText value="#{row.bindings.Empno.inputValue}"
label="#{bindings.EmpView3.hints.Empno.label}"
required="#{bindings.EmpView3.hints.Empno.mandatory}"
columns="#{bindings.EmpView3.hints.Empno.displayWidth}"
maximumLength="#{bindings.EmpView3.hints.Empno.precision}"
shortDesc="#{bindings.EmpView3.hints.Empno.tooltip}" id="it1">
<f:validator binding="#{row.bindings.Empno.validator}"/>
<af:convertNumber groupingUsed="false"
pattern="#{bindings.EmpView3.hints.Empno.format}"/>
</af:inputText>
</af:column>
<af:column sortProperty="#{bindings.EmpView3.hints.Ename.name}"
filterable="true" sortable="true"
headerText="#{bindings.EmpView3.hints.Ename.label}" id="c2">
<af:inputText value="#{row.bindings.Ename.inputValue}"
label="#{bindings.EmpView3.hints.Ename.label}"
required="#{bindings.EmpView3.hints.Ename.mandatory}"
columns="#{bindings.EmpView3.hints.Ename.displayWidth}"
maximumLength="#{bindings.EmpView3.hints.Ename.precision}"
shortDesc="#{bindings.EmpView3.hints.Ename.tooltip}" id="it2">
<f:validator binding="#{row.bindings.Ename.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="#{bindings.EmpView3.hints.Job.name}" filterable="true"
sortable="true" headerText="#{bindings.EmpView3.hints.Job.label}"
id="c3">
<af:inputText value="#{row.bindings.Job.inputValue}"
label="#{bindings.EmpView3.hints.Job.label}"
required="#{bindings.EmpView3.hints.Job.mandatory}"
columns="#{bindings.EmpView3.hints.Job.displayWidth}"
maximumLength="#{bindings.EmpView3.hints.Job.precision}"
shortDesc="#{bindings.EmpView3.hints.Job.tooltip}" id="it3">
<f:validator binding="#{row.bindings.Job.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="#{bindings.EmpView3.hints.Mgr.name}" filterable="true"
sortable="true" headerText="#{bindings.EmpView3.hints.Mgr.label}"
id="c4">
<af:inputText value="#{row.bindings.Mgr.inputValue}"
label="#{bindings.EmpView3.hints.Mgr.label}"
required="#{bindings.EmpView3.hints.Mgr.mandatory}"
columns="#{bindings.EmpView3.hints.Mgr.displayWidth}"
maximumLength="#{bindings.EmpView3.hints.Mgr.precision}"
shortDesc="#{bindings.EmpView3.hints.Mgr.tooltip}" id="it4">
<f:validator binding="#{row.bindings.Mgr.validator}"/>
<af:convertNumber groupingUsed="false"
pattern="#{bindings.EmpView3.hints.Mgr.format}"/>
</af:inputText>
</af:column>
<af:column sortProperty="#{bindings.EmpView3.hints.Hiredate.name}"
filterable="true" sortable="true"
headerText="#{bindings.EmpView3.hints.Hiredate.label}" id="c5">
<f:facet name="filter">
<af:inputDate value="#{vs.filterCriteria.Hiredate}" id="id1">
<af:convertDateTime pattern="#{bindings.EmpView3.hints.Hiredate.format}"/>
</af:inputDate>
</f:facet>
<af:inputDate value="#{row.bindings.Hiredate.inputValue}"
label="#{bindings.EmpView3.hints.Hiredate.label}"
required="#{bindings.EmpView3.hints.Hiredate.mandatory}"
columns="#{bindings.EmpView3.hints.Hiredate.displayWidth}"
shortDesc="#{bindings.EmpView3.hints.Hiredate.tooltip}"
id="id2">
<f:validator binding="#{row.bindings.Hiredate.validator}"/>
<af:convertDateTime pattern="#{bindings.EmpView3.hints.Hiredate.format}"/>
</af:inputDate>
</af:column>
<af:column sortProperty="#{bindings.EmpView3.hints.Sal.name}" filterable="true"
sortable="true" headerText="#{bindings.EmpView3.hints.Sal.label}"
id="c6">
<af:inputText value="#{row.bindings.Sal.inputValue}"
label="#{bindings.EmpView3.hints.Sal.label}"
required="#{bindings.EmpView3.hints.Sal.mandatory}"
columns="#{bindings.EmpView3.hints.Sal.displayWidth}"
maximumLength="#{bindings.EmpView3.hints.Sal.precision}"
shortDesc="#{bindings.EmpView3.hints.Sal.tooltip}" id="it5">
<f:validator binding="#{row.bindings.Sal.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="#{bindings.EmpView3.hints.Comm.name}" filterable="true"
sortable="true" headerText="#{bindings.EmpView3.hints.Comm.label}"
id="c7">
<af:inputText value="#{row.bindings.Comm.inputValue}"
label="#{bindings.EmpView3.hints.Comm.label}"
required="#{bindings.EmpView3.hints.Comm.mandatory}"
columns="#{bindings.EmpView3.hints.Comm.displayWidth}"
maximumLength="#{bindings.EmpView3.hints.Comm.precision}"
shortDesc="#{bindings.EmpView3.hints.Comm.tooltip}" id="it6">
<f:validator binding="#{row.bindings.Comm.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="#{bindings.EmpView3.hints.Deptno.name}"
filterable="true" sortable="true"
headerText="#{bindings.EmpView3.hints.Deptno.label}" id="c8">
<af:inputText value="#{row.bindings.Deptno.inputValue}"
label="#{bindings.EmpView3.hints.Deptno.label}"
required="#{bindings.EmpView3.hints.Deptno.mandatory}"
columns="#{bindings.EmpView3.hints.Deptno.displayWidth}"
maximumLength="#{bindings.EmpView3.hints.Deptno.precision}"
shortDesc="#{bindings.EmpView3.hints.Deptno.tooltip}"
id="it7">
<f:validator binding="#{row.bindings.Deptno.validator}"/>
<af:convertNumber groupingUsed="false"
pattern="#{bindings.EmpView3.hints.Deptno.format}"/>
</af:inputText>
</af:column>
</af:table>
</af:panelCollection>
</f:facet>
</af:panelSplitter>
</f:facet>
<f:facet name="header"/>
<f:facet name="start">
<af:panelGroupLayout id="pgl1">
<af:panelFormLayout id="pfl1">
<f:facet name="footer">
<af:commandButton text="Upload" id="uploadButton"
actionListener="#{FileProcessor.checkFile}" partialSubmit="true"/>
</f:facet>
<af:inputFile label="EmpFile" id="if1" value="#{FileProcessor.uploadedFile}"
partialTriggers="uploadButton" binding="#{FileProcessor.inputFile}"/>
<af:messages id="m2"/>
</af:panelFormLayout>
</af:panelGroupLayout>
</f:facet>
<f:facet name="branding"/>
<f:facet name="copyright"/>
<f:facet name="status"/>
</af:pageTemplate>
</af:form>
</af:document>
</f:view>
</jsp:root>
and bean class code is as follows.
package xxorn.model.view;
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import javax.faces.application.FacesMessage;
import javax.faces.component.UIComponent;
import javax.faces.component.UIViewRoot;
import javax.faces.context.FacesContext;
import javax.faces.event.ActionEvent;
import oracle.adf.view.rich.component.rich.input.RichInputFile;
import oracle.adf.view.rich.component.rich.output.RichMessages;
import oracle.adf.view.rich.context.AdfFacesContext;
import org.apache.myfaces.trinidad.model.UploadedFile;
import org.apache.myfaces.trinidad.util.ComponentUtils;
public class FileProcessor {
private CSVtoADFTableProcessor tablecreator;
private UploadedFile uploadedFile;
private String filename;
private long filesize;
private String filecontents;
private String filetype;
private RichMessages errorMsg;
private RichInputFile inputFile;
public FileProcessor() {
public void setUploadedFile(UploadedFile uploadedFile) {
this.uploadedFile = uploadedFile;
this.filename = uploadedFile.getFilename();
this.filesize = uploadedFile.getLength();
this.filetype = uploadedFile.getContentType();
try {
if (filename.endsWith(".csv"))
tablecreator.processCSV(uploadedFile.getInputStream());
else if(filename.endsWith(".xls")){
System.out.println("uploaded file is ********"+uploadedFile);
tablecreator.fileSubmit(uploadedFile.getInputStream());
//tablecreator.WriteXLS(uploadedFile.getInputStream());
else if (filename.endsWith(".xlsx")){
tablecreator.fileSubmitXSSF(uploadedFile.getInputStream());
//wrong file upload
else{
String msg="this is a global message.";
FacesContext ctx =FacesContext.getCurrentInstance();
FacesMessage fm = new FacesMessage(FacesMessage.SEVERITY_ERROR, msg, "Please Upload proper file");
ctx.addMessage(null,fm);
} catch (IOException e) {
e.printStackTrace();
public void convertStreamToString(InputStream is) throws IOException {
StringBuilder sb = new StringBuilder();
String line;
BufferedReader reader = new BufferedReader(new InputStreamReader(is, "UTF-8"));
while ((line = reader.readLine()) != null) {
sb.append(line).append("\n");
System.out.println(sb.toString());
public UploadedFile getUploadedFile() {
return uploadedFile;
public void setFilename(String filename) {
this.filename = filename;
public String getFilename() {
return filename;
public void setFilesize(long filesize) {
this.filesize = filesize;
public long getFilesize() {
return filesize;
public void setFilecontents(String filecontents) {
this.filecontents = filecontents;
public String getFilecontents() {
return filecontents;
public void setFiletype(String filetype) {
this.filetype = filetype;
public String getFiletype() {
return filetype;
public void setTablecreator(CSVtoADFTableProcessor tablecreator) {
this.tablecreator = tablecreator;
public CSVtoADFTableProcessor getTablecreator() {
return tablecreator;
public void setErrorMsg(RichMessages errorMsg) {
this.errorMsg = errorMsg;
public RichMessages getErrorMsg() {
return errorMsg;
public String checkFile(ActionEvent actionEvent) throws Exception {
// Add event code here...
System.out.println("in upload action event");
/* RichInputFile vTheInputFileComponent = getInputFile();
vTheInputFileComponent.resetValue();*/
FacesContext vFacesContext = FacesContext.getCurrentInstance();
UIViewRoot vUIViewRoot = vFacesContext.getViewRoot();
RichInputFile vTheInputFileComponent =
(RichInputFile)vUIViewRoot.findComponent("if1");
vTheInputFileComponent.resetValue();
AdfFacesContext adfFacesCtx = AdfFacesContext.getCurrentInstance();
adfFacesCtx.addPartialTarget(inputFile);
return null;
public void setInputFile(RichInputFile inputFile) {
this.inputFile = inputFile;
inputFile=null;
public RichInputFile getInputFile() {
return inputFile;
}

I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file typ

I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file type. I downloaded the latest updates for Adobe Raw as well as the DNG converter, however I don't want to have to convert to DNG before opening in Bridge. Please let me know what I can do to open the CR2 files directly in Bridge CS4, thank you!

Make sure you have the right version...
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

Launching Microsoft Access from Internet Explorer to view a downloaded MDB file opens the wrong file (not a problem if I use Firefox)

When clicking on a link (in Internet Explorer 9) to download an Access MDB file and then choosing to open the file directly in Microsoft Access (2007) instead of saving it, the file is copied to Temporary Internet Files but Microsoft Access tries to open
a different file and displays an (Unrecognized database format) error.
When I click on the option to open the file, the MDB file is copied to Temporary Internet Files\Content.IE5 but instead of that file, Access tries to open a different (incorrect) file located in Temporary Internet Files\Content.MSO (e.g. in the above error
message, NativeView.do is an XML file containing an error message).
I don't see this problem with Word, Excel or PowerPoint files. When opening a Word file (without saving) the Word file is copied to Content.IE5 but an identical .tmp file is created in Content.MSO which when opened in Microsoft Word displayed the required file
correctly. The same happens for Excel files. PowerPoint appears to be handled a little differently (no .tmp file created in Content.MSO but the required file is still copied to Content.IE5) but the PPT file is still opened correctly in Microsoft PowerPoint.
I think the Content-Type "application/msaccess" is fine because Internet Explorer does launch Microsoft Access. It just tries to open the wrong file (or so I think). However, it looks like the file type is not being determined. Here is what I noticed
when trying to open different Microsoft Office files using Internet Explorer:
The last one is the MDB file. As you can see, only for this type of file, the "Type" (Microsoft Office Access 2007?) is not displayed in this Open/Save dialog box.
On Firefox, I don't see this problem. When I tried clicking on the link to the MDB file in Firefox, Microsoft Access was launched and the file was opened correctly. Is there something I can do so the MDB file is opened properly using IE? I can add/change headers
in the HTTP response that writes this file to the output stream (on disk) if that helps.
Thanks for your time!

Sounds like a problem symptom to be discussed in either an IE forum or an Access forum, not here. How did you come to post here? ForumsRedesign. That might be an on-topic issue for this forum. <eg>
Can you find your way to either of those other forums easily from here? Another on-topic question for here I think. ; )
Robert Aldwinckle
Oops, my bad. Thanks for letting me know! :)
I've re-posted it here: http://social.technet.microsoft.com/Forums/ie/en-US/1a818501-296c-42fb-8abb-ba914629c962/launching-microsoft-access-from-internet-explorer-to-view-a-downloaded-mdb-file-opens-the-wrong-file?forum=ieitprocurrentver
Hopefully that's the right place for this.
Cheers!

Streaming audio file over the network w JMF. How to know when the file end

Hi
I am streaming audio file over the network using JMF. I want to be able to know when a file end so I can close the streaming session.
Can some one please help
Thanks

If you put a ControllerListener on the Processor that's associated with generating the RTP stream, it'll generate an "EndOfMedia" event when the end of the file is reached.

2005 Help center is it complete or is it the wrong file..?

Ihave just downloaded the 2005 sdk help Center to get some information abou the UserQueries Object and the downloaded file (b1_sdk.zip) starts off with the homepage titled
'SAP Business One SDK 2004' !! and no ref at all to the UserQueries Object.
so question is twofold
is the 2005 SDK helpcenter incorrect(ie Wrong file linked)
and 2 where can I get some detail about the UserQueries Object
thanks..

https://www.sdn.sap.com/irj/sdn/developerareas/businessone
is where I got it from.
Looks like you have found the same error,
i installed the 2005 sdk from a 2005 release CD but the help file was NOT installed with it ,(and the CD is at the head office)
But if there is a link to the correct file anywhere I would appreciateit
thanks
Maybe someone from SAP can correct the file and let us know
Message was edited by: George Savery

All pdf say they are the wrong file type or are damaged. will not allow to open in preview and no pdf's can be printed as they are "empty"

All PDF's I try to save will save but nobody can open them. Message is it cannot be opened by reader it is the wrong file type or has been damaged.
Tried to open with Preview and the message says it is empty, also empty if you try to sea as a PDF in the print option!

Hi Michelle in MD,
Thank you for posting on the Adobe Forums, as botht applications cannot open the PDF file, i would suggest you to download it again and try.
Thanks,
Vikrantt Singh

Wrong file naming on latest installation ISO

Hi all.
I whose trying to install Arch from latest installation ISO without any success. I whose thinking that whose problem with UEFI and USB combination, similar to this
Boot USB installation as EFI
I've whose getting same output as on this screenshot
But after studying error messages, I've noticed some wrong file naming:
\ARCH\X86_64\USR_LIB_MODULES_FS.SFS
\ARCH\X86_64\ROOT_IMAGE_FS.SFS
\ARCH\I686\USR_LIB_MODULES_FS.SFS
\ARCH\I686\ROOT_IMAGE_FS.SFS
\ARCH\ANY\USR_SHARE_FS.SFS
Setup expects to find
\ARCH\X86_64\USR-LIB-MODULES.FS.SFS
\ARCH\X86_64\ROOT-IMAGE.FS.SFS
\ARCH\I686\USR-LIB-MODULES.FS.SFS
\ARCH\I686\ROOT-IMAGE.FS.SFS
\ARCH\ANY\USR-SHARE.FS.SFS
After changing file names, setup boots up normally and start shell. This is problem with file names or in ARCHISO.IMG?
Hope it helps for others to run installation media.
Hope it helps for others to run installation media.

thanks alot for the clarification, I tried to search Google on this trouble and I finally found this post!
I also had to rename, although I extracted with 7-zip I renamed both the ROOT_IMAGE.FS.SFS files to whatever was tried at the prompt ...
We really should put some pre-built alternative images up for this on the download-page

Got a SACD rip and all the files ending .dsf How I open it?

I new to this
I got some music SACD rips and all the files ending .dsf How I open it?

double click my domain in the Applications folder in i web
Just so we're on the same page you mean when you double click on the domain file that's located in your Users/Home/Library/Application Support/iWeb folder, right?
if we're on the same page try the following:
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT

Wrong file ending

Similar Messages

Maybe you are looking for