Wrong format in Approval Mail to the user
Hi,
I have received the approval mail for my Expense report and the amount in the mail is shown as 1389,,5
but the actual amount requested is 1389,15 EUR.
Kindly Suggest.
Sincerely,
Manasa
Please work directly with your travel department to resolve the issue. The support avenues for SAP employees are documented on the right side of the portal page here:
https://portal.wdf.sap.corp/irj/portal?NavigationTarget=navurl://989aa963a6af802bae7b6390db4b2cef
Similar Messages
-
How to send ALV output data into Excel sheet format via Mail to the user?
Hi friends,
I have a doubt ie,
How to send ALV output data into Excel sheet format via Mail to the user?
regards
MoosaHi,
Provide the output internal table to the objbin in the below FM
Send Message
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = i_docdata
put_in_outbox = c_x
TABLES
packing_list = i_objpack
object_header = i_objhead
contents_bin = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
and specify the document type
i_objpack-doc_type = 'XLS'.
and try.
Regards,
Nandha -
How to send a mail to the user with attachement
Hi Experts,
I have a requirement where user needs to get the automatic mail which has the updated information sheet as the attachement.
Kindly give me a clue on this.
if any body has model program for this...kidnly send it to [email protected]
Thanks in Advance,
AiswaryaHI
good
go throug this link
http://help.sap.com/saphelp_nw04s/helpdata/en/38/71f865c2c9a94ab1dce95792187c16/content.htm
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
go through this report=>
: Report ZSAPTALK :
: Author SAPdev.co.uk :
: Description : :
: Send mail message to SAP mail inbox. :
: Please visit www.sapdev.co.uk for further info :
REPORT ZSAPMAIL NO STANDARD PAGE HEADING.
TABLES: DRAD,
QINF,
DRAW,
SOUC,
SOFD,
DRAP.
DATA: P_RETURN_CODE LIKE SY-SUBRC.
data: d_username LIKE DRAP-PRNAM.
mail declarations
DATA : BEGIN OF NEW_OBJECT_ID. " the newly created email object
INCLUDE STRUCTURE SOODK.
DATA : END OF NEW_OBJECT_ID.
DATA : BEGIN OF FOLDER_ID. " the folder id of the outbox
INCLUDE STRUCTURE SOODK.
DATA : END OF FOLDER_ID.
DATA : BEGIN OF REC_TAB OCCURS 5. " the table which will contain the
INCLUDE STRUCTURE SOOS1. " information on the destination
DATA : END OF REC_TAB.
DATA : BEGIN OF OBJECT_HD_CHANGE. " the table which contains the
INCLUDE STRUCTURE SOOD1. " info for the object we will be
DATA : END OF OBJECT_HD_CHANGE. " creating
DATA : OBJECT_TYPE LIKE SOOD-OBJTP. " the type of object
DATA : BEGIN OF OBJHEAD OCCURS 5. " the header of the object
INCLUDE STRUCTURE SOLI.
DATA : END OF OBJHEAD.
DATA : BEGIN OF OBJCONT OCCURS 0. " the contents of the object
INCLUDE STRUCTURE SOLI. " i.e. the text etc
DATA : END OF OBJCONT.
DATA : BEGIN OF OBJPARA OCCURS 5. " formatting options
INCLUDE STRUCTURE SELC.
DATA : END OF OBJPARA.
DATA : BEGIN OF OBJPARB OCCURS 5. " formatting options
INCLUDE STRUCTURE SOOP1.
DATA : END OF OBJPARB.
DATA : BEGIN OF T_MAIL_TEXT OCCURS 0, "Message table for messages to
STRING(255), "user via mailbox
END OF T_MAIL_TEXT.
Parameter: p_uname like sy-uname.
**START-OF-SELECTION
START-OF-SELECTION.
d_username = p_uname.
PERFORM POPULATE_EMAIL_TEXT.
PERFORM SETUP_TRX_AND_RTX_MAILBOXES USING P_RETURN_CODE.
PERFORM CREATE_AND_SEND_MAIL_OBJECT.
FORM POPULATE_EMAIL_TEXT *
Inserts text for email message *
FORM POPULATE_EMAIL_TEXT.
CLEAR T_MAIL_TEXT-STRING. "puts a blank line in
APPEND T_MAIL_TEXT.
APPEND T_MAIL_TEXT.
adds failed list on to end of success list.
T_MAIL_TEXT-STRING = 'Test email message line 1'.
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = 'Test email message line 1'.
APPEND T_MAIL_TEXT.
CLEAR T_MAIL_TEXT-STRING. "puts a blank line in
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = 'Header1 Header2 Header3'.
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = '----
APPEND T_MAIL_TEXT.
ENDFORM.
*& Form SETUP_TRX_&_RTX_MAILBOXES
Ensure that the mailboxes of the sender (INTMGR) are set up OK
FORM SETUP_TRX_AND_RTX_MAILBOXES USING P_RETURN_CODE.
get the user no of the sender in order to add the mail to the
user name's outbox for future reference
SELECT SINGLE * FROM SOUC
WHERE SAPNAM = SY-UNAME. "SAP name of a SAPoffice user
IF SY-SUBRC NE 0.
"Error finding the SAPoffice user info for the user
MESSAGE E064(ZR53) WITH SY-UNAME.
P_RETURN_CODE = 1.
EXIT.
ENDIF.
*Get the outbox No for the sender from the user No where the folder
" type is an outbox
SELECT * FROM SOFD WHERE OWNTP = SOUC-USRTP "Owner type from ID
AND OWNYR = SOUC-USRYR "Owner year from the ID
AND OWNNO = SOUC-USRNO "Owner number from the I
AND FOLRG = 'O'."Output box
ENDSELECT.
IF SY-SUBRC NE 0.
" Error getting folder information for the user
MESSAGE E065(ZR53) WITH SY-UNAME.
P_RETURN_CODE = 1.
EXIT.
ENDIF.
ENDFORM. " SETUP_TRX_&_RTX_MAILBOXES
*& Form CREATE_AND_SEND_MAIL_OBJECT
FORM CREATE_AND_SEND_MAIL_OBJECT.
FOLDER_ID-OBJTP = SOFD-FOLTP. " the folder type ( usually FOL )
FOLDER_ID-OBJYR = SOFD-FOLYR. " the folder year ( usually 22 )
FOLDER_ID-OBJNO = SOFD-FOLNO. " the folder no.
OBJECT_TYPE = 'RAW'. " the type of object being added
build up the object information for creating the object
OBJECT_HD_CHANGE-OBJLA = SY-LANGU. " the language of the email
OBJECT_HD_CHANGE-OBJNAM = 'PS to DM Interface'. " the object name
mail subject 'Mass Linking of QA, pass/fail'
MOVE TEXT-002 TO OBJECT_HD_CHANGE-OBJDES.
OBJECT_HD_CHANGE-DLDAT = SY-DATUM. " the date of the email
OBJECT_HD_CHANGE-DLTIM = SY-UZEIT. " the time of the email
OBJECT_HD_CHANGE-OBJPRI = '1'. " the priority ( highest )
OBJECT_HD_CHANGE-OBJSNS = 'F'. " the object sensitivity
F is functional, C - company sensitive
object_hd_change-skips = ' '. " Skip first screen
object_hd_change-acnam = 'SM35'. " Batch imput transaction
object_hd_change-vmtyp = 'T'. " Transaction type
add the text lines into the contents of the email
CLEAR OBJCONT.
REFRESH OBJCONT.
free objcont. " added this to delete the mail contents records
LOOP AT T_MAIL_TEXT.
OBJCONT-LINE = T_MAIL_TEXT-STRING.
APPEND OBJCONT.
ENDLOOP.
CLEAR OBJCONT.
build up the table of receivers for the email
REC_TAB-RCDAT = SY-DATUM. " the date to send the email
REC_TAB-RCTIM = SY-UZEIT. " the time to send the email
the SAP username of the person who will receive the email
REC_TAB-RECNAM = D_USERNAME.
the user type of the person who will send the email ( USR )
REC_TAB-SNDTP = SOUC-USRTP.
the user year of the person who will send the email ( 22 )
REC_TAB-SNDYR = SOUC-USRYR.
the user number of the person who will send the email
REC_TAB-SNDNO = SOUC-USRNO.
the sap username of the person who will send the email
REC_TAB-SNDNAM = SY-UNAME.
get the user info for the receiver of the document
SELECT SINGLE * FROM SOUC WHERE SAPNAM = D_USERNAME.
IF SY-SUBRC NE 0.
WRITE : / TEXT-001, D_USERNAME. "usnam.
EXIT.
ENDIF.
the user number of the person who will receive the email ( USR )
REC_TAB-RECNO = SOUC-USRNO.
the user type of the person who will receive the email ( USR )
REC_TAB-RECTP = SOUC-USRTP.
the user year of the person who will receive the email ( USR )
REC_TAB-RECYR = SOUC-USRYR.
the priority of the email ( highest )
REC_TAB-SNDPRI = '1'.
check for delivery on the email
REC_TAB-DELIVER = 'X'.
send express so recipient knows there is a problem
REC_TAB-SNDEX = 'X'.
check for a return receipt
REC_TAB-READ = 'X'.
the sap username of the person receiving the email
REC_TAB-ADR_NAME = D_USERNAME. "usnam.
add this receiver to the internal table
APPEND REC_TAB.
CLEAR REC_TAB.
call the function to create the object in the outbox of the sender
CALL FUNCTION 'SO_OBJECT_INSERT'
EXPORTING
FOLDER_ID = FOLDER_ID
OBJECT_HD_CHANGE = OBJECT_HD_CHANGE
OBJECT_TYPE = OBJECT_TYPE
OWNER = SY-UNAME
IMPORTING
OBJECT_ID = NEW_OBJECT_ID
TABLES
OBJCONT = OBJCONT
OBJHEAD = OBJHEAD
OBJPARA = OBJPARA
OBJPARB = OBJPARB
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 1
COMMUNICATION_FAILURE = 2
COMPONENT_NOT_AVAILABLE = 3
DL_NAME_EXIST = 4
FOLDER_NOT_EXIST = 5
FOLDER_NO_AUTHORIZATION = 6
OBJECT_TYPE_NOT_EXIST = 7
OPERATION_NO_AUTHORIZATION = 8
OWNER_NOT_EXIST = 9
PARAMETER_ERROR = 10
SUBSTITUTE_NOT_ACTIVE = 11
SUBSTITUTE_NOT_DEFINED = 12
SYSTEM_FAILURE = 13
X_ERROR = 14
OTHERS = 15.
IF SY-SUBRC NE 0.
MESSAGE A063(ZR53) WITH SY-SUBRC.
EXIT.
ENDIF.
call the function to send the already created email to the receivers
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
FOLDER_ID = FOLDER_ID
OBJECT_ID = NEW_OBJECT_ID
OUTBOX_FLAG = 'X'
OWNER = SY-UNAME
TABLES
RECEIVERS = REC_TAB
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 1
COMMUNICATION_FAILURE = 2
COMPONENT_NOT_AVAILABLE = 3
FOLDER_NOT_EXIST = 4
FOLDER_NO_AUTHORIZATION = 5
FORWARDER_NOT_EXIST = 6
NOTE_NOT_EXIST = 7
OBJECT_NOT_EXIST = 8
OBJECT_NOT_SENT = 9
OBJECT_NO_AUTHORIZATION = 10
OBJECT_TYPE_NOT_EXIST = 11
OPERATION_NO_AUTHORIZATION = 12
OWNER_NOT_EXIST = 13
PARAMETER_ERROR = 14
SUBSTITUTE_NOT_ACTIVE = 15
SUBSTITUTE_NOT_DEFINED = 16
SYSTEM_FAILURE = 17
TOO_MUCH_RECEIVERS = 18
USER_NOT_EXIST = 19
X_ERROR = 20
OTHERS = 21.
IF SY-SUBRC EQ 0.
MESSAGE I035(ZR53) WITH NEW_OBJECT_ID D_USERNAME. "usnam.
ELSE.
MESSAGE I036(ZR53) WITH D_USERNAME." sy-subrc.
ENDIF.
ENDFORM. " CREATE_AND_SEND_MAIL_OBJECT
thanks
mrutyun -
Hi Guys,
I Have The Requirement Like ,I need To Send The Data As A Mail From the ABAP Program,and also i need to set the sender address different from the login-id,how to set the sender address different from login-id..please help with the coding..
<REMOVED BY MODERATOR>
thanks®ards
srinivasulu.j
Edited by: Alvaro Tejada Galindo on Jan 24, 2008 9:32 AMhi
good
pls check this report.
: Report ZSAPTALK :
: Author SAPdev.co.uk :
: Description : :
: Send mail message to SAP mail inbox. :
: Please visit www.sapdev.co.uk for further info :
REPORT ZSAPMAIL NO STANDARD PAGE HEADING.
TABLES: DRAD,
QINF,
DRAW,
SOUC,
SOFD,
DRAP.
DATA: P_RETURN_CODE LIKE SY-SUBRC.
data: d_username LIKE DRAP-PRNAM.
mail declarations
DATA : BEGIN OF NEW_OBJECT_ID. " the newly created email object
INCLUDE STRUCTURE SOODK.
DATA : END OF NEW_OBJECT_ID.
DATA : BEGIN OF FOLDER_ID. " the folder id of the outbox
INCLUDE STRUCTURE SOODK.
DATA : END OF FOLDER_ID.
DATA : BEGIN OF REC_TAB OCCURS 5. " the table which will contain the
INCLUDE STRUCTURE SOOS1. " information on the destination
DATA : END OF REC_TAB.
DATA : BEGIN OF OBJECT_HD_CHANGE. " the table which contains the
INCLUDE STRUCTURE SOOD1. " info for the object we will be
DATA : END OF OBJECT_HD_CHANGE. " creating
DATA : OBJECT_TYPE LIKE SOOD-OBJTP. " the type of object
DATA : BEGIN OF OBJHEAD OCCURS 5. " the header of the object
INCLUDE STRUCTURE SOLI.
DATA : END OF OBJHEAD.
DATA : BEGIN OF OBJCONT OCCURS 0. " the contents of the object
INCLUDE STRUCTURE SOLI. " i.e. the text etc
DATA : END OF OBJCONT.
DATA : BEGIN OF OBJPARA OCCURS 5. " formatting options
INCLUDE STRUCTURE SELC.
DATA : END OF OBJPARA.
DATA : BEGIN OF OBJPARB OCCURS 5. " formatting options
INCLUDE STRUCTURE SOOP1.
DATA : END OF OBJPARB.
DATA : BEGIN OF T_MAIL_TEXT OCCURS 0, "Message table for messages to
STRING(255), "user via mailbox
END OF T_MAIL_TEXT.
Parameter: p_uname like sy-uname.
**START-OF-SELECTION
START-OF-SELECTION.
d_username = p_uname.
PERFORM POPULATE_EMAIL_TEXT.
PERFORM SETUP_TRX_AND_RTX_MAILBOXES USING P_RETURN_CODE.
PERFORM CREATE_AND_SEND_MAIL_OBJECT.
FORM POPULATE_EMAIL_TEXT *
Inserts text for email message *
FORM POPULATE_EMAIL_TEXT.
CLEAR T_MAIL_TEXT-STRING. "puts a blank line in
APPEND T_MAIL_TEXT.
APPEND T_MAIL_TEXT.
adds failed list on to end of success list.
T_MAIL_TEXT-STRING = 'Test email message line 1'.
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = 'Test email message line 1'.
APPEND T_MAIL_TEXT.
CLEAR T_MAIL_TEXT-STRING. "puts a blank line in
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = 'Header1 Header2 Header3'.
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = '----
APPEND T_MAIL_TEXT.
ENDFORM.
*& Form SETUP_TRX_&_RTX_MAILBOXES
Ensure that the mailboxes of the sender (INTMGR) are set up OK
FORM SETUP_TRX_AND_RTX_MAILBOXES USING P_RETURN_CODE.
get the user no of the sender in order to add the mail to the
user name's outbox for future reference
SELECT SINGLE * FROM SOUC
WHERE SAPNAM = SY-UNAME. "SAP name of a SAPoffice user
IF SY-SUBRC NE 0.
"Error finding the SAPoffice user info for the user
MESSAGE E064(ZR53) WITH SY-UNAME.
P_RETURN_CODE = 1.
EXIT.
ENDIF.
*Get the outbox No for the sender from the user No where the folder
" type is an outbox
SELECT * FROM SOFD WHERE OWNTP = SOUC-USRTP "Owner type from ID
AND OWNYR = SOUC-USRYR "Owner year from the ID
AND OWNNO = SOUC-USRNO "Owner number from the I
AND FOLRG = 'O'."Output box
ENDSELECT.
IF SY-SUBRC NE 0.
" Error getting folder information for the user
MESSAGE E065(ZR53) WITH SY-UNAME.
P_RETURN_CODE = 1.
EXIT.
ENDIF.
ENDFORM. " SETUP_TRX_&_RTX_MAILBOXES
*& Form CREATE_AND_SEND_MAIL_OBJECT
FORM CREATE_AND_SEND_MAIL_OBJECT.
FOLDER_ID-OBJTP = SOFD-FOLTP. " the folder type ( usually FOL )
FOLDER_ID-OBJYR = SOFD-FOLYR. " the folder year ( usually 22 )
FOLDER_ID-OBJNO = SOFD-FOLNO. " the folder no.
OBJECT_TYPE = 'RAW'. " the type of object being added
build up the object information for creating the object
OBJECT_HD_CHANGE-OBJLA = SY-LANGU. " the language of the email
OBJECT_HD_CHANGE-OBJNAM = 'PS to DM Interface'. " the object name
mail subject 'Mass Linking of QA, pass/fail'
MOVE TEXT-002 TO OBJECT_HD_CHANGE-OBJDES.
OBJECT_HD_CHANGE-DLDAT = SY-DATUM. " the date of the email
OBJECT_HD_CHANGE-DLTIM = SY-UZEIT. " the time of the email
OBJECT_HD_CHANGE-OBJPRI = '1'. " the priority ( highest )
OBJECT_HD_CHANGE-OBJSNS = 'F'. " the object sensitivity
F is functional, C - company sensitive
object_hd_change-skips = ' '. " Skip first screen
object_hd_change-acnam = 'SM35'. " Batch imput transaction
object_hd_change-vmtyp = 'T'. " Transaction type
add the text lines into the contents of the email
CLEAR OBJCONT.
REFRESH OBJCONT.
free objcont. " added this to delete the mail contents records
LOOP AT T_MAIL_TEXT.
OBJCONT-LINE = T_MAIL_TEXT-STRING.
APPEND OBJCONT.
ENDLOOP.
CLEAR OBJCONT.
build up the table of receivers for the email
REC_TAB-RCDAT = SY-DATUM. " the date to send the email
REC_TAB-RCTIM = SY-UZEIT. " the time to send the email
the SAP username of the person who will receive the email
REC_TAB-RECNAM = D_USERNAME.
the user type of the person who will send the email ( USR )
REC_TAB-SNDTP = SOUC-USRTP.
the user year of the person who will send the email ( 22 )
REC_TAB-SNDYR = SOUC-USRYR.
the user number of the person who will send the email
REC_TAB-SNDNO = SOUC-USRNO.
the sap username of the person who will send the email
REC_TAB-SNDNAM = SY-UNAME.
get the user info for the receiver of the document
SELECT SINGLE * FROM SOUC WHERE SAPNAM = D_USERNAME.
IF SY-SUBRC NE 0.
WRITE : / TEXT-001, D_USERNAME. "usnam.
EXIT.
ENDIF.
the user number of the person who will receive the email ( USR )
REC_TAB-RECNO = SOUC-USRNO.
the user type of the person who will receive the email ( USR )
REC_TAB-RECTP = SOUC-USRTP.
the user year of the person who will receive the email ( USR )
REC_TAB-RECYR = SOUC-USRYR.
the priority of the email ( highest )
REC_TAB-SNDPRI = '1'.
check for delivery on the email
REC_TAB-DELIVER = 'X'.
send express so recipient knows there is a problem
REC_TAB-SNDEX = 'X'.
check for a return receipt
REC_TAB-READ = 'X'.
the sap username of the person receiving the email
REC_TAB-ADR_NAME = D_USERNAME. "usnam.
add this receiver to the internal table
APPEND REC_TAB.
CLEAR REC_TAB.
call the function to create the object in the outbox of the sender
CALL FUNCTION 'SO_OBJECT_INSERT'
EXPORTING
FOLDER_ID = FOLDER_ID
OBJECT_HD_CHANGE = OBJECT_HD_CHANGE
OBJECT_TYPE = OBJECT_TYPE
OWNER = SY-UNAME
IMPORTING
OBJECT_ID = NEW_OBJECT_ID
TABLES
OBJCONT = OBJCONT
OBJHEAD = OBJHEAD
OBJPARA = OBJPARA
OBJPARB = OBJPARB
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 1
COMMUNICATION_FAILURE = 2
COMPONENT_NOT_AVAILABLE = 3
DL_NAME_EXIST = 4
FOLDER_NOT_EXIST = 5
FOLDER_NO_AUTHORIZATION = 6
OBJECT_TYPE_NOT_EXIST = 7
OPERATION_NO_AUTHORIZATION = 8
OWNER_NOT_EXIST = 9
PARAMETER_ERROR = 10
SUBSTITUTE_NOT_ACTIVE = 11
SUBSTITUTE_NOT_DEFINED = 12
SYSTEM_FAILURE = 13
X_ERROR = 14
OTHERS = 15.
IF SY-SUBRC NE 0.
MESSAGE A063(ZR53) WITH SY-SUBRC.
EXIT.
ENDIF.
call the function to send the already created email to the receivers
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
FOLDER_ID = FOLDER_ID
OBJECT_ID = NEW_OBJECT_ID
OUTBOX_FLAG = 'X'
OWNER = SY-UNAME
TABLES
RECEIVERS = REC_TAB
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 1
COMMUNICATION_FAILURE = 2
COMPONENT_NOT_AVAILABLE = 3
FOLDER_NOT_EXIST = 4
FOLDER_NO_AUTHORIZATION = 5
FORWARDER_NOT_EXIST = 6
NOTE_NOT_EXIST = 7
OBJECT_NOT_EXIST = 8
OBJECT_NOT_SENT = 9
OBJECT_NO_AUTHORIZATION = 10
OBJECT_TYPE_NOT_EXIST = 11
OPERATION_NO_AUTHORIZATION = 12
OWNER_NOT_EXIST = 13
PARAMETER_ERROR = 14
SUBSTITUTE_NOT_ACTIVE = 15
SUBSTITUTE_NOT_DEFINED = 16
SYSTEM_FAILURE = 17
TOO_MUCH_RECEIVERS = 18
USER_NOT_EXIST = 19
X_ERROR = 20
OTHERS = 21.
IF SY-SUBRC EQ 0.
MESSAGE I035(ZR53) WITH NEW_OBJECT_ID D_USERNAME. "usnam.
ELSE.
MESSAGE I036(ZR53) WITH D_USERNAME." sy-subrc.
ENDIF.
ENDFORM. " CREATE_AND_SEND_MAIL_OBJECT
thanks
mrutyun^ -
We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.
About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone. Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc. This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...
-
Send a mail to the user after first time login
How to send mail to the user after the user login for the first time in oim 11g r2
How to send mail to the user after the user login for the first time in oim 11g r2
-
Formatting a Date based on the user's Locale
I'm having some trouble formatting a date based on the user's locale. I'm aware you can do something like this:
public static String getAsString( Object dateObject, Locale locale ) {
DateFormat dateFormat = DateFormat.getDateInstance( DateFormat.MEDIUM, locale );
return dateFormat.format( dateObject );
However, this is returning something like Jan 21, 2009. I need 01/21/2009. Of course, if this was the UK locale it'd have to be 21/01/2009. Any help would be appreciated.another issue I'm running into is that when I'm logged in as a users' locale which uses '-' instead of '/' (i.e. 21-01-2009), I get a parse error. Can anyone provide any input? Thanks.
* Parse a Date
* @param dateString
* @param locale
* @return parsed Date
public static Object parseDate( String dateString, Locale locale ) {
DateFormat dateFormat = DateFormat.getDateInstance( DateFormat.SHORT, locale );
try {
return dateFormat.parse( dateString );
catch( Exception exception ) {
throw new ExceptionUtl( UtlMessageHelper.getMessage( UtlMessageConstants.ERROR_FailedParseDateFromString, dateString ), exception );
* Format the given value into a DateFormat
* @param dateObject
* Object value to be formatted
* @param locale
* Locale format to use
* @return dateObject in SimpleDateFormat
public static String formatDate( Object dateObject, Locale locale ) {
DateFormat dateFormat = DateFormat.getDateInstance( DateFormat.SHORT, locale );
if( dateFormat instanceof SimpleDateFormat ) {
SimpleDateFormat simpleDateFormat = ( SimpleDateFormat )dateFormat;
String pattern = simpleDateFormat.toPattern();
if( !pattern.contains( "yyyy" ) ) {
pattern = pattern.replace( "yy", "yyyy" );
if( !pattern.contains( "dd" ) ) {
pattern = pattern.replace( "d", "dd" );
if( !pattern.contains( "MM" ) ) {
pattern = pattern.replace( "M", "MM" );
simpleDateFormat = new SimpleDateFormat( pattern );
return simpleDateFormat.format( dateObject );
return null;
} -
Send the MRP results through mail to the user.
Dear SAP Gurus,
My client have a requirement where in they want that the MRP results as displayed in MRP list should be sent through mail to the user after the MRP run. Is it possible through the standard functionality ?
Regards'
AnkushDear ,
In MD04/MD05 -Check there is an option called Sending e-mail at the header ( Envelope sysmbol ) .From here you can send e-mail to MRP Controller if your user is identified as MRP Controller .
In Customizing for MRP, you can maintain a mail link to inform an MRP controller by using the mail connection function you can do it.In Customizing for MRP, you have entered a mail recipient (individual recipient or recipient group) for the MRP controller in the IMG activity Define MRP controller. You can also integrate the sending of the mail into a workflow .
If you want to send the mail directly to just one MRP controller and include the MRP list or stock/requirements list automatically, you can use the function for variable printing. When using variable printing, the data is displayed in the form of a list that can be processed and printed. A separate mail function also appears, which you can use to send this print list.
MRP controller will get mail in that case you are planned to use Workflow to trigger mails for a given condition of MRP evaluation.
SPROMRP- -EvalutionActivate workflow mail to mrp controller .Also check SAP Note 426648
Explore this above functionality with this information and try to check the same
Regards
JH -
How i can send a mail to the user SAP Office mailbox through the spool.
hi all,
I have created an report and scheduled for background and it generated a spool now how i can send a mail to the user SAP Office mailbox through that spool.
please provide me the sample code if possible.
thanks.Read the spool number with this...
SELECT RQIDENT
INTO (T_TSP01-RQIDENT)
FROM TSP01
WHERE RQOWNER EQ SY-UNAME
AND RQCLIENT EQ SY-MANDT.
APPEND T_TSP01.
ENDSELECT.
Use this FM RSPO_IRETURN_RAW_DATA to read the content of the spool into an Internal Table...
Finally use this FM SO_OBJECT_SEND to send the mail to an SAP Office user...
Greetings,
Blag. -
Send the billing output by e-mail for the user
Hi,
Can you tell me if it's possible to send the billing output by e-mail (Medium = 5 - External send) for the user that create the billing document? the e-mail of the user is in SU01D.
Thanks in advance
DoraHi Dora,
What you can do is when you want to send a mail to customer after you receive the email for bill is do the following settings.
1) Create a condition record VV31 with the required Key combination where you can give the name of the Employee or end user with the email id.
2) Select the trasmission medium as 7 ( Simple Mail)
3) Once the Billing is done E-Mail will be triggered.
4) Downlaod it or forward it to your client with the additional text in the E-Mail.
Hope this helps.
Thanks and Regards
Rohit Dujari -
How to send external mails to the user
Dears,
How to send external mails to the user who creates the sales document (Quotation)
Can you please suggest what modification required in the FM
Thanks,
pinkyYou can have a partner function like 'Created by' and use an exit to populate the User ID to this partner function(dont have the system right now but i think this can be done with standard partner detr. procedure also)
Then, create an Output type for that Partner function with transmission medium as 'External Send'. You can use the standard SAP program to trigger the email. To send the actual email after the output is trigerred, the link connection has to be set up be BASIS but if you want to check, then goto SOST and see if the email got trigerred or not. -
How can i insure that job finished and good and send mail to the user ?
how can i insure that job finished and good ,
and how can i send mail to the user "ok" ?Hi Dakota. We do something simular with our nightly MRP job. Our MRP job runs around midnight, then we kick off another job about 4am which checks to see if any of the jobs in question have abended, if so, then it sends an email to the email addresses specify in the report variant. Of course, this could be modified to check for successfully complete jobs, if that is your requirement.
REPORT ZBCJOBMONITOR .
TABLES: SOMLREC90,
TBTCO.
DATA: MAILDATA LIKE SODOCCHGI1.
DATA: MAILTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILREC LIKE SOMLREC90 OCCURS 0 WITH HEADER LINE.
DATA: I_TBTCO LIKE TBTCO OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS: S_JOB FOR TBTCO-JOBNAME.
SELECT-OPTIONS: S_JOBC FOR TBTCO-JOBClass.
SELECT-OPTIONS: S_REC FOR SOMLREC90-RECEIVER.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
CLEAR: MAILDATA, MAILTXT, MAILREC, I_TBTCO.
REFRESH: MAILTXT, MAILREC, I_TBTCO.
PERFORM GET_ABENDED_JOBS.
PERFORM BUILD_RECEIVERS.
LOOP AT I_TBTCO.
PERFORM BUILD_TEXT_MESSAGE.
PERFORM SEND_MAIL_NODIALOG..
ENDLOOP.
* Form BUILD_TEXT_MESSAGE
FORM GET_ABENDED_JOBS.
SELECT * FROM TBTCO
INTO CORRESPONDING FIELDS OF TABLE I_TBTCO
WHERE JOBNAME IN S_JOB
AND STATUS = 'A'
AND JOBCLASS IN S_JOBC
AND SDLSTRTDT = SY-DATUM.
ENDFORM.
* Form BUILD_TEXT_MESSAGE
FORM BUILD_TEXT_MESSAGE.
DATA: DATE(10) TYPE C.
DATA: TIME(10) TYPE C.
MAILDATA-OBJ_NAME = 'MONITOR'.
MAILDATA-OBJ_DESCR = 'Batch Job Monitor'.
MAILDATA-OBJ_LANGU = SY-LANGU.
CONCATENATE 'Job Name:' I_TBTCO-JOBNAME
INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
PERFORM FORMAT_DATE USING I_TBTCO-SDLSTRTDT
DATE.
CONCATENATE I_TBTCO-SDLSTRTTM+0(2) ':'
I_TBTCO-SDLSTRTTM+2(2) ':'
I_TBTCO-SDLSTRTTM+4(2)
INTO TIME.
CONCATENATE 'Start Date/Time:' DATE TIME
INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
CONCATENATE 'Job Class:' I_TBTCO-JOBCLASS
INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
MAILTXT-LINE = 'Job has terminated abnormally'.
APPEND MAILTXT.
ENDFORM.
* Form BUILD_RECEIVERS
FORM BUILD_RECEIVERS.
LOOP AT S_REC.
CLEAR MAILREC.
MAILREC-RECEIVER = S_REC-LOW.
MAILREC-REC_TYPE = 'U'.
APPEND MAILREC.
ENDLOOP.
ENDFORM.
* Form SEND_MAIL_NODIALOG
FORM SEND_MAIL_NODIALOG.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = MAILDATA
DOCUMENT_TYPE = 'RAW'
PUT_IN_OUTBOX = 'X'
TABLES
OBJECT_HEADER = MAILTXT
OBJECT_CONTENT = MAILTXT
RECEIVERS = MAILREC
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
* Form FORMAT_DATE
FORM FORMAT_DATE USING IN
OUT.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
EXPORTING
DATE_INTERNAL = IN
IMPORTING
DATE_EXTERNAL = OUT
EXCEPTIONS
DATE_INTERNAL_IS_INVALID = 1
OTHERS = 2.
ENDFORM.
Regards,
Rich Heilman -
Approval Templates for the User Defined Object(UDO)
Hi,
I just wanted to check whether the Approval Templates for the User Defined Object(UDO)...i.e. Said to the User Defined Form..
if possibe how it can be done.....
Thanks in Advance,
With Regards,
MadhuSudhana Rao.GHi MadhuSudhana Rao,
The function you requested is not available yet.
Thanks,
Gordon -
I get an intermittent " Cannot Get Mail. The user name or Password is incorrect" I haven,t touch any settings. Any ideas?
That usually means that the mail server is busy and rejects the Mail App's request for a mail update.
-
PO output type to send a mail to the user along with PO output as PDF file
Hi Friends,
I have one requirement from client.
Client wants the PO output to be converted to PDF format and sent to User while doing the PO release through e-mail. Can anybody guide me how to Configure a New Output Type and convert the PO output into PDF and send to User through e-mail.
Thanks
NazerThis can be done with the standard form itself.
first find out the output type u r using.
Then goto T-code NACE and then choose EF- purchase order and then select the output type u r using.
Then goto the 'processing Routines' at the lefe side of the screen.
There u can find out the output forms for this output typr u r using. Here add 'Simple mail-7' in the list and then give the program name and the smartform or the script u r using.
We can also give the mail texts for this output form.
After that goto ME22N and then choose the 'Messages' tab and then click the simple mail and in the 'communication method' kindly provide the mail id for which the PO mail has to be sent.
And then the mail can be viewed in the inbox of the recipient.
in this way we can sent the PO mail to the corresponding mail address,.
I guess this will solve ur issue.
Thanks and Regards
Siva
Edited by: Sivaprakash R on Apr 20, 2009 1:00 PM
Edited by: Sivaprakash R on Apr 20, 2009 1:00 PM
Maybe you are looking for
-
Inserting data in field of Supervisor Area Field
HI, In my R/3 system ... In table of PA0001 (HR Master Record: Infotype 0001 (Org. Assignment)) Supervisor Area (MSTBR) field, There is no data for Supervisor Area in table of PA0001. How to insert into data for Supervisor Area (MSTBR). I need to in
-
I finished importing photos from my camera's compact flash drive (using a fuji card reader) but pulled the USB out before ejecting. Now I can't import pics to iPhoto. When I view pics in IPhoto they all now have a narrow black strip along each of t
-
I have had an itunes account for over 10 years with no problems. I yesterday went to purchase a gift card for my son and it was rejected with the message your account is not compliant. To my knowledge, nothing has changed, my account details haven't
-
How to complete download of Adobe Acrobat XI?
I just downloaded Adobe Acrobat XI Standard in a download version from Adobe, and have done it and run updates and registration is calling for earlier version od Adobe Acrobat, which was deleted in the process. How to finish? <Removed by Moderator>
-
Can LR5 libraries be viewed in older LR versions?
I have used the 30 day LR5 trial and I don't love it and prefer LR3 that I have been using for the past few years. I've created some libraries though, and want to know how I can view them if I return to using LR3 after the trial. I didn't import the