Wrong frame rate, syncing in PT, what is going to happen when back in FCX

In a short movie I recorded audio on my recorder at 24 bits and 48 khz, video was shot at 29.97 with 2 dslr's and for some reason has been edited in a 25i project.
( a permanent orange bar remained on the timeline)
I asked them to bring me the whole library, since i didn't notice this issue I exported a video for protools of course at 25 and worked on it in protools, I synced all audio dialogue and effects, bounced a stereo audio master and reimported it in FCX in time line.
I was wondering if I am going to expect any trouble about all this.

You have to use the Store in the country where you lives. If you have some credit balance you must spend it in order to change countries. If your store credit is less than the cost of a single item on the iTunes Store, App Store, iBooks Store, or Mac App Store, you can add a credit card to your account.
After you change the country of your account, you won't see the items you purchased from the previous country’s store in the Purchased section.
You will not lose your original iTunes purchases. Since the magazine subscription is not available in your new country, you will not be able to download the new ones.
Can't change the country of your iTunes Store, App Store, iBooks Store, or Mac App Store account - Apple Support
Change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account - Apple Support

Similar Messages

What's going on? When I type a title on my new Pages document, iwork is substituting a hyphen for the colon I want! Have never seen this one before. How do I correct this imposition? I have the 10.6.8 OS and Pages'09.

What's going on? When I type the title of my new Pages document, iwork is substituting a hyphen for the colon I want. This is bizarre! How do I make my computer do my thing vs its thing? I have Pages '09.

Colons are used by the operating system so can't be used in file names.

With the new iOS 7 update, does anyone know what the setting "Bold Text" will do? If you click on this, it says it will restart your iPhone. Before I do this, I'm just wanting to be sure I know what's going to happen.

With the new iOS 7 update. Does anyone know what the setting "Bold Text" means or will do? Obviously I do know what Bold Text is. It says if you click on this, it says it will restart your iPhone. Before I do this, I'm just wanting to be sure I know what's going to happen.
Thanks,
-Lee

It just reboots the device and bolds the system fonts. No harm done. If you don't like it, undo the setting, it will reboot and back to as it was.

If I change country what is going to happen ?

I purchased my iPad when being in Switzerland. When there I started to subscribe to magazines or services thru the local App Store. When I came back to the country I am living in the 1st thing I noticed was that my subscription to Eurosport wasn't working anymore due to rights issue. Bummer !
Now I would like to purchase services thru the Chilean App Store (because it seems that one application I want is not available from the Swiss store) but it seems I can't shop in both shops. When I wanted to switch I got a message saying "You must spend your balance before you can change stores.". What ?
When I'll change store what is going to happen with the magazine I am reading purchased from the Swiss store ? Am I going to be able still reading the publication I purchased ? I have got a magazine's subscription for one year, am I going being able to read it ?

You have to use the Store in the country where you lives. If you have some credit balance you must spend it in order to change countries. If your store credit is less than the cost of a single item on the iTunes Store, App Store, iBooks Store, or Mac App Store, you can add a credit card to your account.
After you change the country of your account, you won't see the items you purchased from the previous country’s store in the Purchased section.
You will not lose your original iTunes purchases. Since the magazine subscription is not available in your new country, you will not be able to download the new ones.
Can't change the country of your iTunes Store, App Store, iBooks Store, or Mac App Store account - Apple Support
Change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account - Apple Support

What is going to happen to iWeb in the log run

What is going to happen to iweb in the long run?

artworks349 wrote:
So what happen to frontrow?
See HERE.
artworks349 wrote:
Whats a good web builder thats a esay to us as iweb had a look at sandvox
Consider the free Weebly — it's a browser-based builder, so you'll be able to update your site from any modern Mac or PC. And Weebly's net promoter score — an industry calculation of how likely users are to recommend a service to others — is an unusually high 80%. (Source)

What is supposed to happen when a tethered Blackberry Tour receives an incoming call?

I have a blackberry tour on an enterprise system. Can anyone tell me what is supposed to happen when tethered and an incoming call comes in to the phone? My company will soon be getting rid of our aircards, and activating the tethering feature on the blackberrys. We use VPN to connect to the intranet. Also, can I make an outgoing phone call without disconnecting from the internet?
Thanks,
Alex

Hi Gruntz,
When you are using the tethering feature on your Blackberry device, the in coming call could interfere with your data connection. Also, when you make an outbound call, it would disconnect from your internet tethering feature. This is because the device would not be able to make and receive calls as its connected to the internet.

Did not pay my bill, what's going to happen to me?

Well long story short Verizon ripped me off and won't admit to it. I refuse to pay my bill a month and a half ago. my phone is deactivated. What is going to happen to me in terms of what I owe? And will I keep getting charged every month?

rcschnoor is correct.
Definitely do not have all details needed.
Heres the route the account will take.
Im assuming:
1. The account has been disconnected due to non-payment.
2. There is a balance owed on the account..
Consequences: Financial services calling you. You will be offered a settlement, which is lower than you bill due. Should you refuse will eventually go to collections and then will affect your credit. Depending which collection agency it goes to they may file to garnish your wages.

So what now? Will Apple ditch iWeb? They could at least tell us what's going to happen. If they ditch the app I'll ditch Apple. After all I bought the Macs for my wife so she could make her own websites.

So what now? Will Apple ditch iWeb? They could at least tell us what's going to happen. After all I bought the Macs (2) for my wife so she could make her own websites. If they ditch the app I'll ditch Apple.

iWeb will still function, even after being ditched by Apple, so your wife can continue creating beautiful webpages.
If they ditch the app I'll ditch Apple.
Logic is not everybody's forte.

Is this a bug?: copied movie clip has wrong frame rate and ruins the main movie's sync

Hello,
I am trying to copy a movieclip with a frame rate of 30 frames per second to a movie that has a frame rate of 30 frames per second. Both movies are actionscript 3 movies. When I do this, my copied movie clip's frame rate reverts to 12 frames per second and all my audio synched animation is trashed. Then when I change it back manually to 30 frames per second it makes my main movie's stage animation go crazy at full possible speed and the audio is all out of sync. I have not set export for sharing or action script on this movie clip. I've tried other movie clips that are 30 frames per second and it is all crazy!
Is this a bug? What can I do? I've got 100s of movie clips I need to make. I can't keep remaking them just because flash has a screw loose. I'll go crazy!
-theGibler

Oh sorry I goofed! My main time line is 12 fps! I can't belive I didn't see this before.

Import mp4 h.264 from camcorder results in wrong frame rate

I have recently bought a PAL Samsung VP HMX20C camcorder that records 1080 50i or 1080 25p but when I import the video files into Final Cut Pro 6 the frame rate of the clips are 59.29 and 29.29 respectively. If these files are played with Quicktime or Mpeg Streamclip the info says that they are 50 fps and 25 fps. What do I need to do to get them to be recognised as PAL clips in FCP?
Thanks in advance.

Many thanks for your replies Tom. Can you recommend the fastest way to convert these clips as I have tried the FCP Media Manager and it won't let me change the frame rate back to 25fps. I would like to know the quickest and easiest way to start editing with this media as the reason I bought this camcorder was to reduce the amount of time to ingest the footage as I was using DV PAL tapes before and had to ingest them in real time.

FCP interprting the wrong frame rate

Hi
My client has delivered some footage using the DVCpro codac (not HD)
Quicktime reads the file correctly as 25fps but when I import the file into FCP, FCP shows it at 32fcp. Although the duration is correct it just shows black when it runs out of frames until it reaches the end.(too short)
I have tried to export a DV version using Qicktime but again FCP still reads it as 32 fps
Any thoughts would be appreciated.

QT and FCP, it seems, get their meta data info from different places. What I would do, and try this from both Quicktime Player and FCP, is export the clip and save it out at the same codec but specify that the frame rate should be 25. This may help clean the clip up without destroying the original.

FCP getting wrong frame rate

I have clips that I'm converting to ProRes with Quicktime. They originate as H.264 files at 29.97 fps. Once converted they play fine in QT player which reports 29.97 fps, as does MediaInfo, but when I bring them into FCP it thinks they are 10 fps. What's going on!

Why? Because AVCHD is so cumbersome to deal with. Since the video is in H.264, "un-wrapping" it merely takes it out of the AVCHD file (converting the audio if necessary) and puts it in a format that can be dealt with at a file level rather than having to keep the BDVM structure. They can also be viewed natively on the Mac and cataloged in CatDV. Since no video conversion is taking place, the process is extremely quick, there is no generational loss, and the files do not balloon to unmanageable sizes. The original AVCHD packages are then archived to disc and I can keep un-wrapped versions near line to convert as needed. It is a much more elegant solution than having to go back to log and transfer every time you want to pull a clip out of AVCHD. The only rub is FCP thinking the clip is 10 fps when EVERY other video app sees it as 29.97!
As for the other questions, nobody TOLD me to do it that way, and while H.264 is often reffered to as a delivery codec, it this case it is the capture codec. And yes I have read the manual on log and transfer. As for what constitutes "proper", that is a matter of opinion to be discussed over a cup of tea. Right now I'm looking for a solution to a problem particular to FCP not a treatise on workflow.

World of warcraft/Diablo 3 frame rate drop to about 25% of normal frame rate and I have to reset SMC to get it back to original. But this happens once every 2-5 days. Is this normal!?

I purchased a 15 inc retina mac book pro in Sep 2012 and everything has been perfect except when I started to play world of warcraft and Diablo 3. After I first installed the games, their frame rates were so bad and the games were un-playable (<10fps). So I spent quite a bit of time searching on the internet and eventually found a solution which is to reset the SMC of the machine. I did this and everything was fantastic, frame rates go up to 30-60 fps on the same settings. However I then realise that I have to reset SMC every few days as the framerate become bad again and again. The frame rate doesn't drop gradually. It is sudden - yesterday the games were fine, today when I turn on the computer they become unplayable.
Any help is appreciated - I tried to contact apple by going through the solution process they have on the website but it just asks me to take the computer to the apple store but I don't have time to do so. It will be great if there is a phone number I can call.
Cheers

Hello Sinaxwe,
This is not a fix but a work around.
gfxCardStatus by Cody Krieger: http://gfx.io
set graphics to discrete only
Play your games.

Newb: How is endpoint path substitution working? I'd like to know what is going on, and when to manually define

I'm looking over the flex dev guide http://livedocs.adobe.com/blazeds/1/blazeds_devguide/ but I really don't see the details of this covered.
I have a single amf channel endpoint defined as such in my services-config.xml:
<channel-definition id="emp-maint-amf" class="mx.messaging.channels.AMFChannel">
<endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf" class="flex.messaging.endpoints.AMFEndpoint"/>
</channel-definition>
What I'd like to know is what is replacing server.name, server.port etc? I asume it's happening at run time since I certainly am not doing anything to set them.
I also a lot of examples where those paths are hardcoded in, and then some, more complicated examples, where you somehow work on setting themselves through code.
What are the pincipals here on when you neeed to define those vars and whe you can get by with them being left as is above?
Shouldn't there be some documentation that covers this? Am I just not finding it? Thanks for any help or links that will help me understand what is going on in regard to figuring out how the path substitution is working.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

What is going to happen with cable cards on 10/12/2010 ?

I just received a letter about possible issues with my cablecard(s), there is a phone number to call but that is of no help. When you call that number you get routed around (maybe disconnected it happened to me) and finally connected to someone who does not handle this. While they tried to get information there was not a clear answer.I have a Panasonic plasma with internal cablecard it seems that one of a few things are going to happen. 1) Nothing 2) loss of all channels 3) Loss of premium channels. I also heard that this enhancement will be going out to other areas on 9-15-2010.
My suggestion to Verizon is before you make such enhancements understand what they are going to do and inform your back-office people. That way when you send out a letter like the one I received they will be able to answer the quest "What are they talking about?"
If anyone knows what will happen please let me know.

My understanding is that it's a required change in order to enable the new STB's to be able to be used on the network in conjunction with the existing Motorola boxes. So, it's a technical requirement in order to allow them to enhance their service offering to the customer base at large. It's not a case of "we don't want to do it any more", it's a case of "we need to make this change to allow us to offer new and improved services".
You are right that people have the option of "voting with their feet", but since this is a "standards" issue, if the enduser device doesn't properly support it and the manufacturer stated that they were CableCard compliant, I'd go back to the manufacturer and demand a fix or claim they sold you a defective product or are guilty of false advertising. If Verizon were implementing something which wasn't part of the standard as already defined, then I'd see the point differently, but in this case I think they are well within their rights
I'm betting Verizon is eyeing the upside of enhanced DVR's, etc. in their service offering as a valuable revenue stream which will far offset any fallout from folks who have faulty equipment.

Wrong frame rate, syncing in PT, what is going to happen when back in FCX

Similar Messages

Maybe you are looking for