Wrong Hostname reference in SM51

Dearl All,
We have one BI server where in we have installed the below application servers:
1. SAP BI Central Instance    (Host1)
2. SAP Application Server 1 (Host2)
3. SAP Application Server 2 (Host3)
When I go in TCODE SM51 and click on HOST3 , system is displaying the work processes belonging to SAP Application Server 2. The name of the host (Host 3) is correctly displayed in status bar of SAP front end.
When I go in TCODE SM51 and click on HOST2 , system is displaying the work processes belonging to SAP Application Server 1. The name of the host (Host 2) is correctly displayed in status bar of SAP front end.
However, when I go in TCODE SM51 and click on HOST1 (Central Instance) , system is displaying the work processes belonging to SAP Application Server 1 but not the Central Instance. The name of the host (Host 2) is displayed in status bar of SAP front end intead of HOST 1 i.e., Central Instance.
Has any one faced this issue before? I would appreciate your help on this.
If you need any more details about this issues, please do not hesitate to ask.
Waiting for your valuable suggestions and kind help.
Regards,
Faisal

Check your Host name entries in /etc/host and compare them to the Host anem entries in SAP profiles.
You need to compre the host names entries from central instance and your application servers as well.
After correcting the issue you need to restart all your instances.
Hope this helps.
Regards
K

Similar Messages

  • Wrong hostname in URL for broadcaster?!

    Hello all,
    we (almost) successfully installed BI broadcaster in our productive BI 7.0 (after an upgrade).
    But the URL in the mail contains the wrong hostname. Instead of the prd-host it contains the hostname of our BI development box.
    Replacing the wrong hostname with the hostname of our productive box brings up the right document.
    I could not find the place where to change the hostname. Does anybody have a hint where to look ?
    The URL looks like this, but instead
    http://hostname_dev.domain.com:50000/irj/servlet/prt/portal/prtroot/pcd!3a
    Thanks for you help !
    Chris

    Hi Satyabrat,
    What is the version of the Solution manager system ?
    Please delete the system in SLD and add it again using RZ70.
    if u r using solman 7.01 version , goto smsy_setup and synchnorize the system details in SLD.
    solman system version is 7.1 ,after system addition check the LMDB* job is completed.
    then goto  se38 -> RLMDB_SYNC_TECHNICAL_SYSTEM run the report and select the system.
    So it will delete all the old setting and synchronize and update the latest systen details.
    Then try the managed system configuration, it will solve the issue.
    Rg,
    Karthik

  • PVC2300 wrong hostname

    Hi,
    we own two PVC2300. They have new hostnames in their configuration, but both registered in DNS with a wrong Hostname (CAM<mac-address>). I did a firmware update, but no chance. Has anyone a solution for me?
    Thanks.

    Sorry I may have misunderstood.
    Are you registering these with a dynamic DNS service in the cloud?
    If so, the IP address you subscribed with would have to match the registered name you submitted..
    Or are you doing local DNS on the LAN, in which case the static NAT IP of the Cameras would match you local DNS table (like an /etc/hosts on Unix).
    The key is a static IP mapped to a name so the IP doesnt change with subsequent DHCP assignment and make your names assoications wrong...maybe?

  • Wrong hostname from DHCP

    Hi,
    I've been  following a strange issue between Macs and Windows Server based DHCP for some time.
    Mac's got their IP address via DHCP, just like Windows machines.
    The compter name is set up in Sharing in System Preferences. Everything seems to be normal.
    Now the fun starts:
    When I open a Terminal window I see a completely different name on the command prompt. This probably causes Apple Remote Desktop not to see some clients when they are on, because they have wrong hostname. ARD complains the Mac are offline when I can walk to the Mac and plainly see it's switched on and connected to the network.
    So, my theory is, the IP Mac get's was previously assigned to an laptop computer, which goes off the network and the DHCP-supplied IP address is released and next get's assigned to a Mac. Somehow the hostname used by the previous IP lease holder sticks to the IP address and get's slapped to the Mac. Strangely this hostname overrides the name assigned on System Preferences.
    Has anyone else observed similar behavior?

    Here's some of my journal:
    Nov 01 12:01:41 localhost kernel: e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
    Nov 01 12:01:41 localhost kernel: e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
    Nov 01 12:01:41 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    Nov 01 12:01:43 localhost kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: R
    Nov 01 12:01:43 localhost kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    Nov 01 12:01:43 localhost dhcpcd[243]: version 5.6.2 starting
    Nov 01 12:01:43 localhost dhcpcd[243]: eth0: sending IPv6 Router Solicitation
    Nov 01 12:01:43 localhost dhcpcd[243]: eth0: sendmsg: Cannot assign requested address
    Nov 01 12:01:43 localhost dhcpcd[243]: eth0: broadcasting for a lease
    ....[non relevant services]...
    Nov 01 12:01:46 localhost dhcpcd[243]: eth0: offered 192.168.10.120 from 192.168.10.1
    Nov 01 12:01:46 localhost dhcpcd[243]: eth0: acknowledged 192.168.10.120 from 192.168.10.1
    Nov 01 12:01:46 localhost dhcpcd[243]: eth0: checking for 192.168.10.120
    Nov 01 12:01:47 localhost dhcpcd[243]: eth0: sending IPv6 Router Solicitation
    Nov 01 12:01:50 localhost dhcpcd[243]: eth0: leased 192.168.10.120 for 14400 seconds
    Nov 01 12:01:50 IC-1 dhcpcd[243]: forked to background, child pid 275
    Nov 01 12:01:50 localhost netcfg-daemon[154]: :: ethernet-dhcp up [done]
    Nov 01 12:01:50 localhost systemd[1]: Started Netcfg multi-profile daemon.
    Nov 01 12:01:50 localhost systemd[1]: Starting Network.
    Nov 01 12:01:50 localhost systemd[1]: Reached target Network.
    See 5 lines from the bottom, the hostname briefly changes, then immediately changes back. IC-1 is the dns name assigned by dnsmasq.
    I'm using netcfg.service. dhcpcd@ is disabled. I don't have ifplugd installed. There's no net-auto-wired service enabled. 
    I'm not sure what is calling dhcpcd in this log.
    Maybe this should be in a different subforum...
    Last edited by tladuke (2012-11-01 19:18:04)

  • Wrong hostname setting after Sun Cluster failover

    Hi Gurus,
    our PI system has been setup to fail over in a sun cluster with a virtual hostname s280m (primary host s280 secondary host s281)
    The basis team set up the system profiles to use the virtual hostname, and I did all the steps in SAP Note 1052984 "Process Integration 7.1 High Availability" (my PI is 7.11)
    Now I believe to have substituted "s280m" in every spot where previously "s280" existed, but when I start the system on the DR box (s281), the java stack throws erros when starting. Both SCS01 and DVEBMGS00 work directories contain a file called dev_sldregs with the following error:
    Mon Apr 04 11:55:22 2011 Parsing XML document.
    Mon Apr 04 11:55:22 2011 Supplier Name: BCControlInstance
    Mon Apr 04 11:55:22 2011 Supplier Version: 1.0
    Mon Apr 04 11:55:22 2011 Supplier Vendor:
    Mon Apr 04 11:55:22 2011 CIM Model Version: 1.5.29
    Mon Apr 04 11:55:22 2011 Using destination file '/usr/sap/XP1/SYS/global/slddest.cfg'.
    Mon Apr 04 11:55:22 2011 Use binary key file '/usr/sap/XP1/SYS/global/slddest.cfg.key' for data decryption
    Mon Apr 04 11:55:22 2011 Use encryted destination file '/usr/sap/XP1/SYS/global/slddest.cfg' as data source
    Mon Apr 04 11:55:22 2011 HTTP trace: false
    Mon Apr 04 11:55:22 2011 Data trace: false
    Mon Apr 04 11:55:22 2011 Using destination file '/usr/sap/XP1/SYS/global/slddest.cfg'.
    Mon Apr 04 11:55:22 2011 Use binary key file '/usr/sap/XP1/SYS/global/slddest.cfg.key' for data decryption
    Mon Apr 04 11:55:22 2011 Use encryted destination file '/usr/sap/XP1/SYS/global/slddest.cfg' as data source
    Mon Apr 04 11:55:22 2011 ******************************
    Mon Apr 04 11:55:22 2011 *** Start SLD Registration ***
    Mon Apr 04 11:55:22 2011 ******************************
    Mon Apr 04 11:55:22 2011 HTTP open timeout     = 420 sec
    Mon Apr 04 11:55:22 2011 HTTP send timeout     = 420 sec
    Mon Apr 04 11:55:22 2011 HTTP response timeout = 420 sec
    Mon Apr 04 11:55:22 2011 Used URL: http://s280:50000/sld/ds
    Mon Apr 04 11:55:22 2011 HTTP open status: false - NI RC=0
    Mon Apr 04 11:55:22 2011 Failed to open HTTP connection!
    Mon Apr 04 11:55:22 2011 ****************************
    Mon Apr 04 11:55:22 2011 *** End SLD Registration ***
    Mon Apr 04 11:55:22 2011 ****************************
    notice it is using the wrong hostname (s280 instead of s280m). Where did I forget to change the hostname? Any ideas?
    thanks in advance,
    Peter

    Please note that the PI system is transparent about the Failover system used.
    When you configure the parameters against the mentioned note, this means that in case one of the nodes is down, the load will be sent to another system under the same Web Dispatcher/Load Balancer.
    When using the Solaris failover solution, it covers the whole environment, including the web dispatcher, database and all nodes.
    Therefore, please check the configuration as per the page below, which talks specifically about the Solaris failover solution for SAP usage:
    http://wikis.sun.com/display/SunCluster/InstallingandConfiguringSunClusterHAfor+SAP

  • [svn:fx-trunk] 13501: Bug: BLZ447 - AMF3 Deserialization: Wrongly counted reference ID of duplicated String when in the same message there are Strings with only wildcards

    Revision: 13501
    Revision: 13501
    Author:   [email protected]
    Date:     2010-01-14 06:01:23 -0800 (Thu, 14 Jan 2010)
    Log Message:
    Bug: BLZ447 - AMF3 Deserialization: Wrongly counted reference ID of duplicated String when in the same message there are Strings with only wildcards
    QA: Yes - please keep an eye on AMFX (HTTPChannel) tests.
    Doc: No
    Checkintests: Pass - except the usual 4-5 tests that time out on my machine.
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/amfx/AMFXDecoder.as

    Dear Pallavi,
    Very useful post!
    I am looking for similar accelerators for
    Software Inventory Accelerator
    Hardware Inventory Accelerator
    Interfaces Inventory
    Customization Assessment Accelerator
    Sizing Tool
    Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
    Request help on such accelerators... Any clues?
    Any reply, help is highly appreciated.
    Regards
    Manish Madhav

  • Netstorage wrong hostname & virtual office empty page

    Hi,
    I updates our oes box (linux) with the latest patches (not sp's) and
    ofcourse: Nothing works anymore.
    When I login into virtual office, click on the netstorage link, I get the
    following message :
    NetStorage getData:IOException
    URL = https://virtualoffice.<mydomain>:443/oneNet/xtier-login
    HTTPS hostname wrong: should be <virtualoffice.<mydomain>
    So I thought, because of a newer netstorage version, I only need to change
    the link and get rid of the ':443' section.
    I login with the admin account, click under administration on the service
    link and a beautiful empty screen appears.
    Every link under the administration gives an empty page.
    So anyone experienced this before?
    Can I change the link in a text file or do I really need to change it by use
    of the VO administrators links?
    Anyone any suggestions?
    regards,
    Peter

    Peter,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Adapter Engine has wrong hostname after HSC with Distributed System

    I have an interesting situation where I have performed a homogeneous system copy from a standard system to a distributed system.  The only that really has changed is the database server name.  I performed the global host install, the database instance import, and then the Primary Application Server install.
    The strange error is that the adapter engine after the install shows the hostname of the database server.  The SLD CIM Instance data shows the hostname of the database server as an adapter engine.  The correct hostname for the adapter engine is there also, but is not updated by the SLD Data Supplier/or RZ70 update.
    The SLD entries for the ABAP and Java stacks are never updated after this copy.
    I'm pretty much stumped on this one.  I think I picked the correct options for the install.

    Hi,
    you said that you have done homogenous system refresh. As a check please follow the below note and let me know if it is helpful.
    SAP Note  1286149 - Configuration Wizard: PI Self Test for NetWeaver
    Also Please go through the doc regarding post installation steps for PI
    [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60d2a693-9504-2b10-5ba7-82964bd8370e]
    Please let me know the result.
    Regards,
    Venkata S Pagolu

  • Register soa composite has wrong hostname dest unreachable

    Hi All,
    I am trying to register an SOA Composite and getting dest unreachable because the hostname originally configured no longer exists. I have searched the file system looking for anything that has the old hostname but find nothing.
    where can i change the hostname? not sure if its a weblogic thing or a manager server thing
    Thanx
    Fred

    Hi,
    Yes it is the command line. Yes I give it the correct OIM url. but it seems as part of registering the composite it wants to turn around
    and connect to soa-infra so it fails with this
    t3://oimvm.THEOLDHOSTNAME.net:8001/soa-infra: Destination unreachable.
    I recently changed the hostname on this machine and I know if I change it back it will work but I would like to know where to change the hostname so I can make the old one match the new one.
    Thanx for the reply.
    Fred

  • Media files are published to blog with the wrong hostname

    Hi there,
    I've changed the hostname of my server and everything is working correctly with the wiki/blog server but when I submit a podcast producer job, although the job finishes without error, the media that's embedded on the page still has the old hostname as the url.
    This works internally (as it's the computer name) but I can't see the poster frame or the video externally.
    Is there a file somewhere I can tinker with to change this?
    Where is the value for this set?
    Many thanks!

    Thanks,
    There was nothing for it but to rebuild the server, though it was quicker and less painful than I remember it being before.

  • Wrong Hostname for OIM/OAM implementation

    Hi everyone,
    I'm having some issues with OAM redirecting using the machine name instead of fully qualified hostname.
    Linux: Red Hat Enterprise Linux Server release 5.6 (Tikanga)
    In my base domain I have installed OIAM 11.1.1.5 (OIM, OAM, SOA, OAAM) and in my secondary domain sits IDM 11.1.1.5 which has OVD, OID, ODSM.
    For my base domain, OAM appears to be listening on http://machine... when I try to login using http://machinename.domain/7001/oamconsole it fails because the page redirects to https://machinename:14101/oam/server/ and this fails... likewise http://machine.domain:14000/oim sends me to the same oam link and ends up failing
    i'd like it to use the fully qualified hostname including domain... how do i do this?
    Thanks

    Hi,
    The likely suspects for this would be the settings for the OAM Server(s) and Load Balancing (if set) in the oamconsole. Please check the hostname settings in the "System Configuration" tab in the screens for the OAM servers (oam-server1 etc) under "Server Instances", and in the "Load Balancing" settigns in "Access Manager Settings".
    Regards,
    Colin

  • WAS Java not coming up after maintaining the wrong hostname in p4 via visua

    Dear Experts,
    We have 701 Solman installed and utilizing it for CTS. After the hardware fail over the CTS functionality stopped woking, then we refered the Note 1389833 - Deployment to a 7.10 or higher J2EE engine does not work and made the changes accordingly,
    while making changes the ip was mistyped and now the java server is not coming up.
    Due the problem in java visula admin also is not up and we unable to revert the entry.
    Please find the error message in java dispatcher
    #1.#00145E776DCA0010000000030039609A0004B2CA5AAA2124#1322482081079#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:6]_13##0#0#Error#1#/System/Server#Java###Core service p4 failed. J2EE Engine cannot be started.
    [EXCEPTION]
    #1#com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open  server socket on 145.17.50.189 and port 50004. Exception: The socket name is not available on this system.', Arguments: []> : Can't furceBundle, key com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open  server socket on 145.17.50.189 and port 50004. Exception: The socket name is not available on this system.
            at com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor.<init>(TransportMonitor.java:219)
            at com.sap.engine.services.rmi_p4.dispatcher.P4ServiceFrame.start(P4ServiceFrame.java:98)
            at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
            at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
            at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
            at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:82)
            at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:154)
    Kindly help in how to revert the value 0.0.0.0 for p4 if visual admin is not available.
    Regards
    Balamurugan

    Hello Bala,
    Please check the hostname of p4 in the instance profile parameter icm/server_port_X.
    Please take a look at note 609603, if you haven't gone through it yet.
    Thanks,
    Siva Kumar
    Edited by: Siva Kumar Arivinti on Nov 30, 2011 11:29 PM

  • Installation using a virtual host created .dbenv with wrong hostname

    Discovered that during the installation of a Solution Manager on Solaris that the .dbenv_<hostname>.sh and .dbenv_<hostname>.csh and were created with <hostname> = Virtual name. However the .profile uses the 'hostname' to determine which .dbenv to use. Since 'hostname' returns the actual server name and not the virtual name the db environment is not set.
    This is easily resolved by renaming the .dbenv to the actual host name. My concern and question is whether this will cause me issues down the road and also I cannot seem to find anyone else or SAP note that reflects this issue.
    Please advise...Thanks...
    David

    Hello David
    We always install using virtual hostnames here, using seperated ip addresses (physical host X with IP Y and virtual host S with IP T) using sapinst option SAPINST_USE_HOSTNAME=<shortname virtual hostname> and we have those profiles with the virtual hostname after installation.
    Kind regards
    Tom

  • FCHU- Reference key Wrongly selected

    Hi,
    While executing FCHU, i wrongly selected Reference Key instead of Assignment field.
    The reference key got populated with cheque No.'s in place of Assignment field.
    Is there any way to rectify this. The line items are huge in no.
    Regards,
    SAPFICO

    please check CHANGE_DOCUMENT bapi
    you can change document no wise and also update reference instead of FCHU

  • Setting hostname

    I'm pretty sure my boss (I hope he doesn't read this) messed up the hostname of one of our server when we were having some problems. It now hast the wrong hostname. In /etc/hostconfig it is set to "-AUTOMATIC-" and I set it to the correct name using "hostname" from a terminal. You have to do something different though don't you? Could some help me? Most services seem to not care but Apache is not happy with a non-existant DNS name.
    Thanks

    I have working DNS so I do not want to cange the hostconfig file from automatic. I tried changeip and it didn't do it. Finally, I found a reference to this file:
    /Library/Preferences/SystemConfiguration/preferences.plist
    Near the bottom of the file it had my incorrect hostname in an entry. I checked a couple servers that were functioning properly and their files were roughly the same except for that hostname entry. After deleting the entry my problem is now solved.

Maybe you are looking for