Wrong images on videos

I have numerous videos (both purchased from iTunes and created myself) that appear with different images (icons) when I open "Videos". For example, I have a season of "Scooby Doo" that shows the album art from "Sam and Dave's Greatest Hits". Some of my home videos from my Flip camera show the first image of the video, while others show assorted album art from various purchased songs and albums. Additionally, these images seem to change each time I sync.
The videos themselves are correct on my Mac, and the play in there entirety on the iPad, but this makes them extremely difficult to locate.

If images are missing then check that you aren't blocking images from some domains.
*check the permissions for the domain in the current tab in "Tools > Page Info > Permissions" or all domains via the about:permissions page
*check that images are enabled: Tools > Options > Content: [X] Load images automatically
*check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images, the permissions.default.image pref should be 1.
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load

Similar Messages

Aperture 3 display wrong image while editing (video example)

Aperture 3, clean install, running on an upgraded Aperture 2 library. Whenever I make a change to a photo, Aperture displays the previous photo on the screen. It correctly edits the photo I have selected, it just displays the wrong image while doing so. Anyone else have this issue?
Video: http://www.youtube.com/watch?v=4bRI9xFBEKI

It seems you have a rare problem.
If the advice already given regarding upgrades fixes thing then all well and good.
If not you might try Matthew Bergsmas tip in:-
http://discussions.apple.com/thread.jspa?threadID=2357072&tstart=0
This reads as follows:-
Go to the finder and move everything in these folders to the trash:
Hard Drive/Library/Caches
Hard Drive/System/Library/Caches
Hard Drive/Users/Your username/Library/Caches
Then reboot.
=====
Aperture will rebuild the caches but give it time.
AW

Transferring images and videos from Nokia 5800 to ...

Hello,
I have been using Nokia PC Suite for years and now decided to jump onto OVI suite because the Nokia PC Suite was not able (mysteriously) to move picture and videos to my pc using USB cable. I gave up and started using OVI suite, which (how bizarre) can transfer images and videos to PC via cable connection with no problem.
I was used to transfering and deleting all that stuff once copies were made to my PC... please correct me if I am wrong ... does OVI allow to do so automatically? I mean deleting the images and videos from the phone when transfer completed? Now my phone's memory and external card are full and I am not sure what I should do.
Thank you in advance for the help.
Cheers.

JESZ wrote:
You know I have being facing the same problems, first when I installed the first version, and is quit the same with the new version of ovi suite. in a 14 G memory card with more than 10 g of free space, the ovi suite do not want to transfer my music. This is a mass!!! I'm very disappointed.
First of all..the Problems are not SAME but totally different..
BTW how are you transferring the Music ? and is it showing any error / message ?
You may try this..(if doing some other way though..). Open OVI Suite and select Music.. Goto File-->Add File to collection and select the file (song) you want to transfer..It will now get displayed in the OVI Suite..Now, connect your phone to PC.. and simply Drag-and-Drop the dislayed file onto the Phone Icon (Bottom - Left Window..) ..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Music files appear on "images and videos" folder i...

After syncing all my music files using windows media player, I have noticed that the "images and videos" folder in my gallery also display music files. Their icons are the pink musical notes, and their file names are all the same ( one of the songs that I have added). When I delete it, the song gets deleted from the phone. Why is it like this? Isn;t this folder supposed to display only images and videos. How come there are music files in it. It looks so messy to me having all the types of files in one folder. Can you please tell me what's wrong with my phone?

can someone please help me.

Tecera A4 Wrong Image Size for Bios update....

using the site tools to id the machine to bios...it led me to a file named...sm45v20.exe, which i downloaded & attempted to update the bios...via floppy / usb drive method.
Done this with other machines (not this one) hundreds of times before...(fix a lot of friends machines...as this is). in the readme, it states this bios is for this string of machines...
Tecra A4
Tecra A4-S111TD
Tecra A4-S211
Tecra A4-S216
Tecra A4-S231
Tecra A4-S236
Satellite M40-S417TD
Satellite M45-S165
Satellite M45-S1651
Satellite M45-S265
Satellite M45-S2651
Satellite M45-S2652
Satellite M45-S2653
Satellite M45-S331
Satellite M45-S3311
Satellite M45-S351
Satellite M45-S3511
Satellite M45-S355
Satellite M45-S3551
where the tecera a4 is model I'm working on.
However, when booting into the update, it goes through the startup....reads the existing rom image...then attempts to look at the disk version...and gives the wrong image size message. Usually, this means ether you've got the wrong bios image (hmmm...toshiba led me to it...so maybe it's wrong...but readme says it's ok) OR the download was corrupt. Re-Downed the entire set up file again (file name as mentioned above) and tried again. All disk work on my master workstation which is almost always correct. (except when it's not?)
Any ideas? What the heck is the A4 anyway? Seems like a very rare model....
<edit>...the ENTIRE model number as shown on the bottom label is: PTA40U-1D701F </edit>
Message Edited by SetiRich on 04-16-2009 05:53 PM

This is a maybe...
Does the A4 in question have Intel video or ATI or nVidia?
Looks like there are different BIOS files depending on the video chipset.

Wrong images displaying

In my slideshows, and other image boxes, often times the wrong image will display. It displays an image from another area of my website. When this happens, it stretches the incorrect image to fit it into whatever aspect ratio the original image was supposed to be.
Right now the issue can be seen on http://www.williamvanbeckum.com/blog.html
The image being displayed is supposed to be square, but is being stretched. The image that is supposed to be there is a rectangular horizontal image.

CS4 needs a good video card and the latest drivers to work well. More details on what are you using would be helpful to narrow the problem down.

Wrong images appearing in project window / timeline

I'm doing a SIMPLE slideshow project for a frient. I've got a file folder of images that I imported into CS5. In the timeline the correct images are not appearing when placed from the timeline. Even in the Project folder most of the images are not what they are in explorer. Most, when opened in the Source Monitor are the correct image, even though the wrong image is appearing on the timeline, but even there many are not correct. What is happening is that the image of about 15 of the 105 imported images are appearing in the place of all of the other images. It's like something is cached, and the appropriate linkages aren't being made.
What's even more frustrating is that the ONLY effect applied to all of the impages is Scale to Frame. There are no transistion. Nothing.
What simple solution is there for images not importing into CS5 correctly?
ARGH!!!!!!!!!!!!!!!!

Thanks for that suggestion. It DOES work! However, it is time consuming since I'm working with over 1,000 images. Instead, I was able to discover the following solution:
The culprit was the magic checkbox under Edit -> Preferences -> Media for "Write XMP ID to Files on Import." This setting writes a GUID to all media imported into Premiere for use with all Adobe apps. I actually found the reference to it in an After Effects forum. I didn't fully understand exactly why this is useful when I'm only working with still images. My guess is that somehow these GUIDs became crossed over.
I disabled this checkbox, deleted all references to the affected media, and deleted all cache files, including all files under C:\Users\Username\AppData\Adobe\Common\Media Cache. I then reimported the originals of my source files from my network attached storage (SO thankful that I moved them offline without touching them). Viola! Everything works.
It was critical that I made copies of all of my data to my NAS. Adobe actually writes this GUID for the XMP ID to the file itself, which changes the modification date of the actual file. So, I guess the error will follow the file wherever it goes (in an Adobe application) unless it's resaved in PhotoShop to correct the error. Luckily, the files on my NAS were untouched by Adobe, since I made copies to work with locally. Only the local files were affected. Once I disabled the checkbox, then Adobe no longer attempts to modify files on import and leaves them intact.

How do i blend image and video on premier?

Hello Everyone
I'm trying to add a video onto an image on Premier. I want the image to be still and the video to play in the background. How do I make an image and video blend together in Premier?
Any tips/effects to make this look more interesting? for my project I'm trying to add a disturbing footage from the news onto a landscape photograph.
I'm using pro 5 on an Imac
Thanks in advance

Video on track one. Image on track two. Use the motion property to locate and size the image.

How can I display three images in video rate succession (60 Hz)?

For a structured illumination microscope application, I have developed a VI that creates three images and displays them in rapid succession (as fast as the loop will go) on a second monitor.
From the naked eye it's pretty apparent that the loop is not displaying the images at video rate. Is there a way (perhaps with some sort of buffer) to get them to display faster? Is WinShow simply not going to be fast enough, and if not, what's an alternative method of displaying the images? If it helps, the images need only be displayed once each (the loop was just for testing).
Also, what is a way to measure the frame rate output of the images?
(sorry for the sloppy code, new to LabView)
Thanks,
-T
Attachments:
illuminationpattern.vi ‏31 KB

Hello,
Why don't you try drawing one window, call IMAQ WindShow once outside of the loop, then redraw that window each iteration within the loop. Hopefully this stops the flutter of the window. You can build a 3 element array of the 3 IMAQ images then use an index array to alternate through which image you want to be redrawn into the single window. The constant calling of IMAQ WindShow seems messy.
Regards,
Isaac S.
Applications Engineer
National Instruments

Tried to reinstall iPhoto library from external hard drive, it shows that the photos and events are there but there are no thumbnails and if you click on an image or video nothing comes up.

My hard drive crashed recently and we took it to apple to get repaired. The apple employees said that they would have to replace the hard drive but they didn't have the equipment to get the data off my hard drive. So I took it to a computer store who had the right equipment after a month and a half of waiting they finally got all the data off my hard drive and put it on an external hard drive (Seagate Expansion Portable Drive). I then took it back to apple who replaced the hard drive. Now I'm in the process of reinstalling everything. I have never done a Time Machine back up or backed my laptop up to . Which I now will do very often once I've reinstalled everything. I have reinstalled all of my desktop images and folders as well as my iTunes library with no issues. However when i went to reinstall my iPhoto library it came up blank. I then Rebuilt the library several times and this was the result.
It shows that the photos and events are there but there are no thumbnails and if you click on an image or video nothing comes up.
Please help i have three years worth of images from holidays on here and would be devastated if i lost them.

iPhoto cannot find the thumbnails or the original pictures.
Go to your iPhoto Library in the Pictures Folder.
Right-click on it and from the resulting menu, choose 'Show Package Contents'.
This will bring you inside the iPhoto Library package. There you should see a Folder called Masters. Within that, there should be folder containing your actual photos.
Are they there?

I can't open images or videos on my external hard drive

hello everyone, I've been having this problem for a while now and its only with images and videos .
when i try to open any picture or video this msg comes up "The file couldn’t be opened because there is no such file"
and i can only open it if i copied the file from my hard drive to my computer .
when i open the info for the same picture (one in on the hard drive and one my computer) the one on the hard drive has nothing under "more info"
while the one on my computer has a lot of details under "more info" .
plz i really need someone to help me

only with images and videos.
yes its the "More Info" section of a finder Get Info window.
this is the Get Info window for the drive itself
its WD external drive 320 GB
this is the Get Info windows of one of the pictures
thank you so much . i will try both smc and pram reset and i'll let you know what happend.

Just bought a 2tb external hard drive with the intention of moving my iPhoto data files on it. I have so much of my 500 gigs being used up by images and video. Questions: Will this foul up my iPhoto app? Do I need to point iPhoto to this new location?

Just bought a 2tb external hard drive with the intention of moving my iPhoto data files to it. I have so much of my 500 gigs being used up by images and video. Questions: Will this foul up my iPhoto app?
Do I need to point iPhoto to this new location?
Thanks!

Are you running a Managed or a Referenced Library?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.
Assuming a Managed Library:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Resized images and video seam blurred in motion 4...

Hello,
I don't know if my problem is a bug or a stupid mistake I did, or something basic I haven't understood about motion, but here it is:
I had to edit today a project I created in september 2009 with motion 3. (I installed 2 weeks ago motion 4). The project is made of images and text. When I opened the old project the images looked ok but seamed blurred although the render settings are at best quality.
I then made an experiment and created a new project in Motion 4 and imported one image, and when I put the quality at best, again this image look unfocused. I would probably not have noticed the problem and thought that the problem comes from the image or from the capabilities of motion, if I didn't have that old video done in motion 3 with the exact same images in the exact same size in perfect crisp quality...
I did a research in forums, but haven't found any one with a similar problem. People usually have pixelated images because they didn't put the best render quality...
I then tried to test this on a different computer with motion 4: same problem. I tried all the settings I could find in Motion, but still no result. I trash the preferences, I repaired the permission of my mac, I reinstalled motion 4, tried several images format and size but still no result.
I noticed that the problem occurs when I resize an image or when I resize a video. At 100% I get perfect quality, but when I resize them, they look blurred. Anything that requires a render seam to be a little blurred when the render quality is set to best. It seams like the anti-aliasing is working so well that it blurs everything... If I put the quality at normal settings, the elements that have been resized look sharp but pixelated...
I haven't tried to test all this again in motion 3 because I don't have access to any computer that still have that version installed. And I haven't phoned applecare yet because they are closed right now in my country, but I will phone them tomorrow morning and let you know if I get any result with them.
I really hope I simply forgot something obvious, or maybe there is a new or old setting in motion 4 that I don't know about or haven't understood properly...
please help me
Louie
ps: My version of Motion is French, so I might not use the right english words used in the english version of Motion.

Thanks for responding.
I'm of course sizing my picture down. The project I was working on yesterday that helped me notice the problem is 300x300 pixels and the images are around 500x1000 pixels, scaled down to around 20%.
I haven't notice today that the problem occurs in other project as well. Before I was not looking in detail at the quality, and if no one tells you about it, you won't notice it. But right now all my old projects done in Motion 3, once opened in Motion 4 seam to have that blurry effect on any image or video that is scaled down.
I understand that Motion might maybe not be very good at scale down things, and might do it less perfetly then Photoshop. But what is odd is that all my old video exported when I had Motion 3 have sharp perfect scaled down images comparred to what I get today in Motion 4.
The blur I'm speaking about is very light. You won't notice it easily unless you have an old version of the same video to compare it with. But in the project I was working yesterday at 300x300 pixel, the difference was really very obvious, because at this size every detail counts.
My idea to solve my problem temporarly was to change my Motion project settings to triple its original size (from 300x300 to 900x900) and blow up everthing 300%, export the video at 900x900 and then scale it down through Quicktime instead of Motion at 300x300. This worked and my images are as sharp as they should be. This project is short and light, so I didn't mind doing this conversion, but when I will work with projects that need more render time, it's not a productiv way to work!
I noticed another odd thing about the problem, I hope I will explain this clearly by describing 3 situations:
1. I create in Motion 4 a new project with any preset.
2. I import an image or a video
3. I scale it down, by pulling one corner (=> the image or video becomes blurred)
4. In the properties inspector I type the word "100" to get it back to 100%
=> the image is still blurred, it is difficult to see, but when I import again the same image and put it next to it you can see a difference althought both image are at 100%!!!
or
1. I create in Motion 4 a new project with any preset.
2. I import an image or a video
3. I scale it down, by pulling one corner (=> the image or video becomes blurred)
4. In the properties inspector I click on the arrow in the top right corner of that reverts to the original settings the image or video
=> the image is perfect
or
1. I create in Motion 4 a new project with any preset.
2. I import an image or a video
3. I scale it down, by typing any number in the properties inspector (=> the image or video becomes blurred)
4. In the properties inspector I type the word "100" to get it back to 100%
=> the image is perfect
So it seams that my problem occurs even at 100% but only if the image has first been modified in its size by pulling one corner and than put back to 100% through the properties inspector...
hmmmm
very odd.
Louie
Message was edited by: Louie13

Images and video not loading after bridge

Hi guys. I followed this guide to put the NVG589 into bridge/passthough mode so I can use my Netgear N600 WNDR3700v2 router. Everything seems to be working fine, except with Facebook, Youtube and a few other sites. Images and video take forever to load (if at all). Everything I have read online suggests either changing to the Google DNS or turning IPv6 off. I am already using Google DNS and I already had IPv6 turned off on the Netgear. I have now turned IPv6 off in the NVG589 as well, yet the problem persists. As we have 30 days to test run AT&T interent, I still have my cable interent active (Suddenlink), so I can plug in the cable modem (SB6121), and everthing loads quickly on Facebook and Youtube. I plug in the NVG589, still not loading...so it's defintley something to do with the settings in the NVG589. Any idea? Thanks in advance.

Hi ,
I am sorry about the issues you are having with your U-verse service loading certain sites, but I will be glad to help. Are you having issues when it is not in bridge mode? Try resetting the U-verse gateway, and just connecting your Netgear to see if you are having the same problem. If so, try doing a direct connection to the gateway without the Netgear to see if the problem still persists.
Let us know how it goes.
-David T

HT5148 i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear. how do i get my video to play clear.

i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear again. how do i get my video to play clear and not fuzzy?

Same reply.

Wrong images on videos

Similar Messages

Maybe you are looking for