Wrong info in ABAP Cert material:  BC400 Intro to the ABAP -mySAP Tech

Hi
As i was looking into the certification material BC400 Course Version: 2003 Q2, Material Number: 50061840 the information put-up @ Pg num 224 on selection-option is incorrect:
Conditions in an internal table that
has been declared using SELECT-OPTIONS are interpreted as follows:
• If the internal table selname is empty, the condition field IN
selname is always true.
• If the internal table contains only inclusive elementary conditions,
such as i_1, ... i_n, the result is the composite condition ( i_1 OR
... OR i_n )
• If the internal table contains only inclusive elementary conditions,
such as i_1, ... i_n, the result is the composite condition ( NOT e_1
) AND ... AND ( NOT e_m ).
• If the internal table contains only inclusive elementary conditions,
such as i_1, ... i_n, the result is the composite condition ( i_1 OR
... OR i_n ) AND ( NOT e_1 ) AND ... AND ( NOT e_m
rather it shud be
Conditions in an internal table that
has been declared using SELECT-OPTIONS are interpreted as follows:
• If the internal table selname is empty, the condition field IN
selname is always true.
• If the internal table contains only inclusive elementary conditions,
such as i_1, ... i_n, the result is the composite condition ( i_1 OR
... OR i_n )
• If the internal table contains only exclusive elementary conditions,
such as i_1, ... i_n, the result is the composite condition ( NOT e_1
) AND ... AND ( NOT e_m ).
• If the internal table contains both inclusive and exclusive elementary conditions,
such as i_1, ... i_n, the result is the composite condition ( i_1 OR
... OR i_n ) AND ( NOT e_1 ) AND ... AND ( NOT e_m
PS: I'd already opened a thread in ABAP forum.
thkx
P.S

Hi
SAP Course fee for all certification is same all over india -
Rs 27,550 only [incase you go for TECHED/ through ur company].. otherwise, it's more
Refer to follwing links -
http://www.sap-img.com/ab040.htm
http://www.sap-img.com/ab041.htm
http://www.sapprofessionals.org/files/ABAP%20CERTIFICATION%20QUESTIONS.doc
http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://www.sapdomain.com
<u><b>Contact SAP Bangalore / SAP TecHED</b></u>
Website : http://www.sapteched.com/india/
For registration :http://www.sapteched.com/india/confactivities/certexam.htm
For quries : [email protected]
www.sap.com
Please reward suitable points, incase you get any help.
regards
Atul

Similar Messages

  • HT5330 My icloud account on my macbook has stuck with the wrong info for incoming mail and I cannot change the info. Somehow the "box" is locked. Any suggestions ?

    having problems receiving mail via iCloud.
    I cannot revise the setting in Mail for mail from the incoming server
    the "box" is jammed and wont let me alter the details.
    reluctant to delete the icloud mail box and start again if it's going to delete everything I have already
    Any suggestions?
    Thanks

    The box has never been locked before and now displays a different name to that suggested by Apple for iCloud.
    There is obviosly something going on at iCloud as there seem to be large numbers of iCloud users having the same problem....
    Works OK with the iphone but not the Macbook !!

  • SAP Cert Material

    Hi All,
    Please forward sap fi cert material for ECC 6 Material.
    [email protected]
    Regards
    Bali
    Edited by: Bali1972 on Apr 14, 2008 6:00 AM

    Hi
    These are the websites which give you good material for those you have asked for.
    http://www.sapfans.com/sapfans/sapfaq/sapcert.htm
    http://www.sap-img.com/sap-fi.htm
    http://www.sapprofessionals.org/?q=125_fi_questions_for_certification
    http://www.sap-img.com/zf006.htm
    http://www.suvendu.com/sap-encyclopedia.html
    http://www.amazon.com/FICO-Interview-Questions-Answers-Explanations/dp/1933804106
    http://www.sapcert.info
    FICO Certification
    http://www.sap-img.com/financial/sap-fi-co-sample-questions-answers-2.htm
    Hope this helps
    Regards
    Jyostna

  • Error during creation of info record for pipline material.(Urgent)

    Hi All,
    We are getting the following error during creation of Info record for pipeline material
    " Material XXXXX is not a pipline material"
    we have checked the material master  and found it is a pipeline material.
    Kindly advice on the same.
    Help in any form will be rewarded.
    Best Regards
    Arihanth

    Hi Arahanth,
       The steps u need to check are;
    1) The Material Type ( If standard then it is PIPE or if defined own Material Type check the settings once preferably in special material type a tick at pipeline mandatory)
    2) when u create the info record (ME11) ensure the info category is selected as pipeline.
    Hope its clear to u
    if solved do reward me points
    Regards
    Anil Thai

  • Two Purchase Info Records for Same Material & Plant Combination

    Hi,
    2 Purchase Info Records are there for Same Material & Plant for 2 Different Vendors & Net Price is maintained in both Info Records
    1. Material M1 - Plant 1000 - Vendor A - Net Price Rs.4
    2. Material M1 - Plant 2000 - Vendor B - Net Price Rs.3
    Vendor A is Regular Vendor
    (Tick as Regular Vendor is his Purchase Info Record)
    It is observed that Rs.3 is picked up for Costing Purposes
    Requirement is that - Net Price within Pur. Info Record of Regular Vendor i.e Rs. 4 must be picked up always for Costing Puposes.
    Is this possible???
    What Logic system uses while picking up the Price in case where there are 2 Pur. Info Records for same Material & Plant???
    Thanks & Regards...
    Ameya...

    Hi,
    1. Material M1 - Plant 1000 - Vendor A - Net Price Rs.4
    (Validity - 28.04.2008 To 31.12.2008)
    2. Material M1 - Plant 1000 - Vendor B - Net Price Rs.3
    (Validity - 01.01.08 To 31.12.2008)
    Thanks & Regards...
    Ameya...

  • How do I stop the drop box from activating, it is using the wrong info and I can't stop it

    When I use the slot to provide my e-mail address, the drop box is activated and has the wrong info in it

    See this: <br />
    http://support.mozilla.com/en-US/kb/Form%20autocomplete#w_deleting-individual-form-entries

  • Not possible to maintain info record for MPN material

    Dear All,
    I m purchasing abc material from one vendor with different make.  and maintaining same in purchase order like :
    Material code            MPN number              rate
    ABC                          reliance make              7
    ABC                          L&T make                     6
    ABC                          videocon make             5
    I maintained source list , quota arrangement , purchase req. , schedule agreement MPN wise.
    but i cant maintain info record MPN wise. info record generate with material code and not as per MPN number.
    Pl suggest.
    Vijay

    Dear,
    Check these links which explains in detail:
    http://www.sap-img.com/materials/maintain-relation-between-alternatives-materials.htm
    http://help.sap.com/saphelp_di471/helpdata/en/75/ee15e055c811d189900000e8322d00/content.htm
    Regards,
    Syed Hussain.

  • How to create an dialog "SAPoffice express info" in ABAP?

    Hi all,
    We would like to create a dialog "SAPoffice express info" to remind the relevant user that he must immediately check his new SAP mail in inbox.
    We see SAP system sometimes send a dialog "SAPoffice express inof" for this same purpose. For example:
    "Express document "Cannot be sent: Send Mail from ABAP Program." received from author "SAPUSER"".
    So we would like to create a dialog "SAPoffice express info" for our cas.
    If anyone know how to create a dialog "SAPoffice express info" in ABAP, please help us?
    Thanks a lot,
    Vinh vo

    Try with function module  SO_NEW_DOCUMENT_SEND_API1. using this you can send express message to sap office.
    RECEIVERS-REC_TYPE = 'B'
    RECEIVERS-REC_ID       = (user id)  " SAP user id for whom you want to send
    RECEIVERS-EXPRESS    'X'        

  • ERRO info 00671: Abap/4 processor: SAPSQL_ARRAY_INSERT_DUPREC

    When I created an Purchase Requistion via PS, I cannot save the requistion, the first message I from SAP office express is Update was terminated, and the error message information is as follows:
    ERRO info 00671: Abap/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
    What can be the problem?
    Thank you.

    It seems there is a problem with PR number range....systems generate a PR number which is already existing in database....someone might have changed the number range....you may check that.

  • Error in BAPI_PO_CHANGE - No info record exists from material and vendor

    Hi,
    I am using BAPI_PO_CHANGE for performing material exchange in a PO.
    While the new exchanged material do not have any info record for the vendor, the BAPI is throwing an error " No info record exists for material ABC and vendor ABC."
    The funny thing is the bapi return Error message shows the vendor number and material number same. Infact the material is A and vendor is B.
    We will not maintain any info records and hence the BAPI should not ask us to maintain any info record.
    Also I want to mention that Material exchange is working fine in ME22N but BAPI is throwing the error. The above error is a warning message in ME22N but a hard error in BAPI.
    Anyone having any idea? Please help.
    <promise removed by moderator>
    Thanks in advance.
    Aafaque Husain
    Edited by: Thomas Zloch on Mar 10, 2011 3:49 PM

    The error and the same values would seem to indicate an error in the input to the BAPI...

  • Some wrong info on a post marked solved and archived

    hey,
    so i found some wrong infor at this link, and since it was the post that helped me start towards fixing my issue, i thought i'd fix it if there is anyway to unarchive and addendum to it.
    the link is: http://discussions.apple.com/thread.jspa?messageID=4592570
    it's about an error 751 when scanning to an SMB dir on a canon iR C5185
    actually, the hostname should be \\XXX.XXX.XXX.XXX (the ip address of the smb server you are trying to put a file on)
    and the file path should be the path on the server in the format of:
    \put\scanned\files\here
    so for a hypothetical example
    hostname: \\192.168.1.2
    file path: \shared\filedrop\folder
    i was frustrated with this for an hour or two, so i figured i should help out and correct the slightly erroneous info on the URL above. If i need to go about that process in some other way please let me know.
    regards,
    -mike
    p.s. for some reason, the 2 back slashes in fron of the hostname ip address aren't showing up when i post this message... the host name needs 2 backslashes in front of the ip address. \\
    Message was edited by: bigmikebrooklyn
    Message was edited by: bigmikebrooklyn

    I was just comming up on day 5 of constant connection at 7616kbps and then the sync dropped.  it only dropped for about 30 seconds and reconnected at the same speed and stats.
    ADSL line status
    Connection information
    Line state    Connected
    Connection time    0 days, 2:08:17
    Downstream    7,616 Kbps
    Upstream    448 Kbps
    ADSL settings
    VPI/VCI    0/38
    Type    PPPoA
    Modulation    ITU-T G.992.1
    Latency type    Interleaved
    Noise margin (Down/Up)    6.1 dB / 26.0 dB
    Line attenuation (Down/Up)    42.0 dB / 23.0 dB
    Output power (Down/Up)    19.8 dBm / 12.5 dBm
    Will that mess up my chances of my IP Profile going to 6500 where it should be? as of an hour ago it was still on 2000K.
    Thanks.
    Dean.

  • Q-Info Record found for material rev level 06

    Dear All
    I have an error Q-info record found for material xxx rev level 06 while doing migo inbound delivery. Even i verify with some documents also but till not to come out of this problem. Is any body having solution.
    Please specify whether it is minor or major problem.
    Awaiting for ur reply

    In QI01/QI02--->You must have created the quality Info record for the vendor /material/revision combination.
    Suppose Material for which PO is cretaed is having latest revision 6 & infor record exists for rev 5 or less and not for rev level 6 ,then you may get this error.Also if relase date for vendor /material/revision combination is not valid then also you can get such error.
    only way is you can create with future relase date..and chaeck again.

  • Since iCloud downloaded, mac pro has not been able to sync, unable to save info, bookmarks, lost all contact info, gives wrong info on laptop status

    since iCloud downloaded, mac pro has not been able to sync, unable to save info, bookmarks, lost all contact info, gives wrong info on laptop status, help please

    since iCloud downloaded, mac pro has not been able to sync, unable to save info, bookmarks, lost all contact info, gives wrong info on laptop status, help please

  • Info on Basic/surface material-SAP EHS Management(Product Compliance)

    Hi All
    I need to correct my understanding on some aspects of Basic material.
    1. I assume there is only one way to create the basic material  that is through Basic Material Specialist role.
       If any other way please let me know.
    2.What is the difference between Basic material and Surface material ?
       Both of the above gives details of the chemical properties of the material. My understanding is surface material gives details
      of the composition of the coatings(paint) provided on the material, where as basic material gives the chemical composition of the
      material.
    For ex : I have Automotive door which is made up of alloy steel and this door is coated with colour red. So the basic material will
    give the chemical composition of alloy steel and Surface material will give the details coat(paint) composition.
    3. How can a material ( Material master Record ) be assigned both with Basic material and Surface material ?
        Basic material is done by creating a Basic/Compliance view but how about Surface material .
    4. How is sepcification is different from Basic material/Surface material ?
    Thanks & Regrads
    Satish

    Hi Satish,
    1. Regarding the point no 3, my understanding for your reply is that a view similar to basic material view will be created to show that material is being coated. So if material has both
    basic material and surface material it will have two views. One view will contain the weight of material (basic data view ) and other view will have weight of paint ( Surface view ).The weight of both would cumulate to 100% and in this case we will not give details of the composition.
    - Automotive door (coated)
    --> Steel alloy 99,97% ( Basic material data  view)
    --> Red paint 0,03%    ( Surface material data view ).
    Hope this is wnat  you mean.
    No, it is the same view. It is called basic material composition (in Compliance Workbench under "Weight and composition" view), but you would maintain the surfaces there, too.
    Regarding the second part of the reply you mean to say that if the surface has to be included in the
    BOM, then it has to be assigned to the material which is at the item level level in the BOM.
    Assume the assignment is done as before by view creation in Material master or is there
    any other way that can be done in BOM itself.
    Typically the BOM is the source in EHSM. Then it depends on how the BOM looks like. If you have the paint as a BOM item you would use the 2nd approach. If you have only the coated part and no BOM containing the paint you would go for the first approach.
    2. What would be  the view name for Surface material ? Any idea where in IMG for Material master
        we would configure it ?
    It's the basic material composition. No different view.
    3.  When you say Compliance releated data, is it  Product structure of Compliance data, Compliance check data, Weight and Composition details, Check Compliane details etc.
    Yes. Only part of the product structure (composition) is still stored in EH&S specification database.
    4. Finally,  how is Business Object  "Compliance Data Object"  is linked to the product compliance specifications ?
    If you create basic materials / surfaces via the Basic material Specialist role a CDO AND a specification is created and they are automaticallly linked.
    Products and components are typically created by the BOMBOS transfer. In EHSM Product Compliance CDOs and specifications are created during BOMBOS and they are linked.
    It is not really possible (in EHSM standard) to link specifications and CDOs manually.
    Regards,
    Andreas

  • Material Characteristics Description on the print of PO

    Hi all,
    I am creating a configurable  material and define the characteristics in the class 300 (variants).i want that when i select that materia code l in the Po in the line item . than during print it will select all the characteristics and  values on the purchase order print .
    if there is any IMG setting than please tell me .
    Regards
    Sachin gupta

    >
    garg.sachin27 wrote:
    > Hi all,
    >
    > I am creating a configurable  material and define the characteristics in the class 300 (variants).i want that when i select that materia code l in the Po in the line item . than during print it will select all the characteristics and  values on the purchase order print .
    >
    > if there is any IMG setting than please tell me .
    >
    > Regards
    > Sachin gupta
    Purchasing document forms are usually customized as per requirement of the client through ABAP. So your requirement can be fulfilled throgh ammendments in the said form through help of ABAPer. You need to notify them where the data needs to appear on the form and from which table the data is pulled from.
    Check this link for characteristics table:
    Material Characteristic Table
    Edited by: Afshad Irani on May 20, 2010 11:53 AM

Maybe you are looking for

  • Can't get it to work

    I've exhausted everything with my LaCie 1TB drive connected to my G5 iMac: • Formatting the partition to Apple Partition Map • Formatting to GUID (just in case) • Plugging the drive directly into the iMac • Trying the other Firewire port • Connecting

  • HT1338 AirPlay mirroring 2012 MacBook pro

    Trouble shooting AirPlay mirroring , MacBook pro AirPlay mirroring icon keeps disappearing and disconnection occurs on apple tv , need help ?

  • JList Cell Height Problem

    I am trying to use a customer cell renderer for a JList. It sort of works, but my cell heights are incorrect because when a cell is selected the JPanel returned from my cell renderer need more space to paint on than an unselected list item. Sample co

  • What is "SQL Anywhere" in Data Source definition?

    Hi All, What is "SQL Anywhere" in Data Source definition? and what is the use ?

  • System requirements for installing Premiere Elements

    Hello, I currently use premiere elements 7 on Vista.  I am upgrading my PC; probably windows 7, possibly windows 8.  Not sure if I will continue with PE version 7 or upgrade to 11.  Can you tell me what hardware components are the most important to r