Wrong jump in menu buttons

I have a project that in the main menu I have four text buttons arranjed vertically like:
1. xxxxxxxxxxxxxx
2. xxxxxxxxxxxxxx
3. xxxxxxxxxxxxxx
4. xxxxxxxxxxxxxx
The first button is number 1 in its properties panel, the second is number 2, and so on.
I burnt the project DVD, and when I run it in a computer, I have no problem because each button highlights when the mouse cursor is over each one.
But when I run the DVD in a desktop DVD player, and the highlight is in the first button, when press the arrow down in the remote control, it jumps to button 3 instead of button 2.
How do I fix this?

Hm-m Edit was out, and it was only minutes, since I posted.
Anyway, I wanted to add just a bit about how Buttons are assigned and then routed to, when Automatic Routing is on.
In Photoshop (PS), the Buttons are Layer Sets, and there stacking order will determine how Encore sees the Button. The Layer Sets that are lower down the Layer Palete will be seen as Button 1, with others in order up the Palette. This will be true, whether you change the Text in the Button Layer Set, or even the Button name in the Layer Set (something that I do to make Linking easy). The stacking order is what Encore uses to determine Automatic Button Routing.
Just do Edit in Photoshop for your Menu, and you'll see the Button numbering scheme, that Encore uses - lowest Button Layer Set (in the Palette) will be seen as Button 1.
Hope that this helps explain this. Obviously, if your Button 2 is not following your Button 1, the order of the Layer Sets, or the location of the Buttons was changed at some time.
Hunt

Similar Messages

Menu Button Functionality

I am wondering if it is possible to have the menu button return to different menu screens, dependent on which menu screen has a certain clip/chapter link on it... thanks.

If you have never done scripting before it could be a lot to absorb. To my knowledge the manual doesn't touch on this directly but it does explain how to move and check values.
If you don't have more than 15 buttons you will only need 1 GPRM. You can rename it to what ever you want or leave it as GPRM 0. You will need one menu set script for each button.
Two lines -1st set GPRM/mov an immediate value of ?(whatever value you decide between 1 and 15)
2nd Jump to your track/story/marker
You will need one button select script. All menu commands(selecting menu) should be directed to your button select script,
The upper portion of the script window will tell it what to do. In this case jump to menu/button
You will have to use the compare command:
execute if GPRM 0 = an immediate value of 1 or whatever the button value should be
If GPRM 0 = 1 jump to menu/button
if GPRM 0 = 2 jump to menu/button
I would make a list of your buttons and assign a value. Refer to this list when you assign the menu value in the set scripts and then you can ensure those values match in the button select script. I would also take the time to name each of your buttons something besides button 1. This will make it a lot easier if you get confused as to where you want to go, where you are going, and what menu etc.
I can try to explain it better but I need to know what you understand to begin with.

Menu Button Won't Work! HELP!

I bought my Ipod one month ago and I have taken extremely good care of it so far.
After charging it full one day, I unplugged it and was about to listen to some music, but the menu button on my clickwheel wouldn't function. The other buttons on the clickwheel were fine, but the menu wouldn't show up (although I can still hear the clicking sound). I left my Ipod alone for a three days (each day I tried the menu button but it still wouldn't work) and finally on the fourth day it was working fine again. About a week later, the same thing happened after I fully charged my Ipod and unplugged it.
Does anyone know what is wrong with my menu button and what I can do about it?
If I were to send it back to Apple for repairing, what happens if the menu button starts working fine again? Would I have to pay a fee for it since nothing appears to be wrong?
Also, when I fill out the form, what issue is it considered? I can't find anything to do with cilckwheel on the issue list. Please help me! Thanks.

I had the same problem with the Menu buton on my 3G iPod.
plug it into your mac / pc and use the restore, this will reload the firmware, then reload all your songs on.
worked for me

Menu button jumps to wrong submenu

Hi, I'd consider myself an advanced DVDSP user, I've used my own problem solving on this one and was hoping it is a known program glitch...anyone seen it before?
My main menu has four buttons linking to sub menus. When one of those buttons is selected it will play the video transition properly but then jump to a menu that has the background of a different menu, but the buttons are all screwed up. The buttons jump to various places throughout the DVD with no rhme or reason.
After my problem solving didn't turn anything up, I crossed it off as a freak incident and rebuilt the menu...which solved the problem. But then the same thing happened to another menu.
One noticible detail...everything works great in the inspector, the problem only occurs upon building it and viewing the video_TS folder in DVD Player or from the burned disc on a standard player.
Any thoughts?
I've got to finish this up and record to DLT...I'm a little nervous about getting back the pressed discs with some random problem that didn't show up elsewhere.
Thanks!
Dual 1.8 GHz G5 Mac OS X (10.4.6)

You still don't have an answer?? Give us a chance! This is a voluntary group you know - all users of the software just like you. Between your first post in this thread and the second is less than half an hour.
To answer your impatient question, the menu button is supposed to go from menu to track and from track to menu. It doesn't jump about randomly at all, it simply moves from one domain to the other. If yours is jumping randomly then you really need to examine that bit and sort out why first of all.
If you really want to disable the remote control menu button whilst in a menu, have a look in the user operations of the property inspector in the advanced tab. You can disable menu calls there. Mind you, it will make your disc somewhat unusual and go against a few established conventions... better to teach your viewers how to use the navigation than to simply disable it for them.

I did`t saw any content of the menu button, what is wrong with my system Indesign

I did`t saw any content of the menu button, what is wrong with my system Indesign

more information will help.
Try to select a frame and on the bottom of Buttons and Forms dailog box click on Covert to Button

Muse page content "jumps" when using menu button

I Created a simple portfolio website in Adobe Muse. Two pages (projects and contact) and for both using the same underlaying stramien page (don't know the English word for that). I added a menu widget to navigate between the two pages. Works fine, but whenever I use the menu button the page content (text and/or pictures) make a little vertical jump before they are in their right position. Obviously this little "jump" is not like it is supposed to be. The website is not yet published or online, cause it's not finished yet, but the problem occurs when I preview what I've made so far.
What could be the cause of this problem and how can I repair it ??
Alexander

are you using Chrome?
try loading my page, www.stacystechpubs.com using Chrome.
Then you see a bar of menu items across the page (home, who am I, terms,...) try clicking on one, then the next one, then the next one. You'll see the box 'Stacy's Tech Publications' jumps when you click on a link.
If you still aren't sure what I mean I need to take a screen capture video and upload it.

Won't open homepage on open, won't open web pages from the menu 'open new window', Can't open menu button

Ok, since update to version 31.0, I have been having some problems.
I have tried doing everything stated in the support page about resetting, reinstalling, safe mode, restarting pc etc.
First problem, when I open Firefox no web page loads. It just says New Tab and a blank white page. If I press the home button I am taken to my homepage which is google.
Second problem, when I right click on a link and the menu pops up, if I click open in new window, a new window opens but it just says New Tab with a blank page and no URL information, just blank.
Third problem, the Open Menu button just doesn't work at all. You can click all you like, that thing is not opening.
I am really stuck as to what to do. I have only been using Firefox for about a month and t was good until these problems. If I can't resolve it, I will have to use another browser as it is really annoying.
I am using Windows 8.1 by the way and have scanned my computer thouroughly for both virus's and malware.

Hi zenithtwc, to test whether this is a settings issue, could you do a three-minute experiment?
'''Create a new Firefox profile'''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
firefox.exe -P
''Don't delete anything here.'' Any time you want to switch profiles, exit Firefox and return to this dialog.
Click the Create Profile button, assign a name like Test731, and skip the option to change the folder location. Then start Firefox in the new profile you created.
Can it reach the internet?
When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

Hi, I was using my iPod Touch and then all of a sudden, the screen went black. So I held the the on and menu button to reboot it and so it shut of and came back on and been on the loading screen for an hour. What can I do to fix it?

Hi, I was using my iPod Touch and then all of a sudden, the screen went black. So I held the on/off button and menu button to reboot it. So it turned off then back on but it has been stuck on the loading page for an hour. What's wrong with it?

- Let the battery fully drain. After charging for at least an hour try here:
iOS: Not responding or does not turn on

Menu button text disappears only on some players

I built and formatted a project using DVDSP 3.0.2. Menus were created in DVDSP. The main menu and scene selection menus look correct on all software players and most set top players I tested. However, on some set top players, including a Sony I tried, the text on the main menu buttons is not visible and the music that loops (.ac3) on the main menu does not play. On a scene selection menu I created, the buttons have the wrong text and font on every button -- but again, only when playing on some players. The tracks play ok on all players.
I burned using DVDSP. I tried buring on -R, +R, and +RW. Same results with all. I tried burning using three different burners. Same results with all. I burned using a PowerBook G4 with 10.3.9 and a PowerMac G5 with 10.4.3. Again, no difference.
I had this problem a year ago when using DVDSP 2. But haven't had the problem with DVDSP 3.
If anyone else has seen this menu text problem, I'd be delighted to know what might solve this before I ship this to the replicator.
Thanks,
Gary

I remember this problem cropping up from time to time. I am not sure, but I thought the solution was that your project has an extra language defined. See if, when you view your project in Outline mode, you have two languages... like English and English-1. If so, delete the English-1.

Web Dynpro ABAP ALV menu button icon image

Hi
Does anybody know how to add or link an image or an icon to a menu button in a
Web Dynpro ABAP ALV view?
I know how to do it in the alv table column but can't find a method for a menu button.
Best regards
Lars

Hi
Found the answer:
DATA: lr_febutton TYPE REF TO cl_salv_wd_fe_button.
lr_febutton->set_image_source( '@4B@' ).
Just used a wrong class.
Best regards
Lars

Menu buttons live on stage

I am no longer able to edit the menu buttons on my stage.
If I click on the buttons layer tab all buttons are
selected, but if I then try to select an individual button it just
takes me to the corrosponding page and will not select.
Please assist
Thanks

Hmm... this is very strange.
If they are all placed in one layer, try rightclicking them
when they are marked, and choose disribute to layers.
If u grouped them, try ungrouping...
If none of these things works, I really don't know what could
be wrong.
U can try posting ur .fla, and I'll see if I can help!

Navigation won't work on menu buttons

Hi
I created a menu with apple template-light index in DVDSP 2.05 and added (dragged) motion assets (each chapters video clip) to the buttons. I used overlay colors=advanced and mapping type=grayscale for the norma-selected-activated states of the buttons. My problem is the navigation arrows won't work to cycle thru the menu buttons (chapters) when I use simulator. i checked the assignments & everything seems ok..even used autoassign now, no luck. When I created another menu with apple template-light index with no assets dragged to the buttons, the navigation arrows worked fine in simulator. Any ideas on what I am doing wrong?
Thanks in advance for any help.

I figured out the problem, so all is good.

Still Frame vs Video Loop Menu Button Issues

Hello,
I have a home video of a wedding I am trying to burn to a DVD using iDVD. I have 7 chapter markers in the movie and I would like to use still clips from the video as the icons in the chapter menu buttons. However, once I select "still image", I can no longer scroll through the entire movie to select the image I want. Instead, it only gives me the first 1 minute 37 seconds of the clip. Does anyone know what I might be doing wrong?
Thanks,
Joe

Nevermind, I have figured it out.

Rollover Menu buttons with audio

I am trying to create a menu with Rollover Graphics for the highlights. So I have the buttons autoactivate to a duplicate menu with a different graphic button.
(ex. Main menu button one color - auto activates to Main Menu button one black and white - hit enter - jump to track)
I know it can be done with layered menus also.
But here is the problem...
I need an audio bed looping through the menu navigation, the problem with the duplicate menus is that the audio starts over everytime I go to a new button highlight. Is there really no way to have audio on a layered menu? Or is there a workaround to having audio without it restarting everytime I go to a new button (which is technically a new menu).
Thanks

As Ryan said - this is a limit of the spec.
When you use a layer based menu in DVDSP you are actually creating a different menu for each layer in the file. This is pretty much the same as using auto-activating buttons and going from menu to menu...
If you are playing a menu then the DVD player's laser is in a particular location on the disc. If you go to a different menu then the laser has to move to the new location. As it moves it cannot then be reading audio from a different location, so it is impossible to play continuous audio. You might well have noticed that no DVD you have ever played has been able to give you continuous audio across different menus for exactly this reason.

Remote Control Menu Button

Starting from the top, I have a 1st play title menu (A) with 4 buttons that are targeted to 4 other menus (B) – each of which, have multiple motion buttons leading to individual clips (C).
I would like to be able to click on the Remote Control Menu button anywhere within the DVD and have it return to the 1st play title menu (A). In the Disc Inspector, I have set the “Remote Control” pull down menu to the 1st play title menu (A).
I can achieve what I want by clicking on the Remote Control “Title” button but not the “Menu” button. What am I missing?
Thanks in advance for your help.

Sorry - I made an assumption that you were not able to go fro a track to the title menu... what you are asking is to go from a menu to the title menu by using the ;menu' key.
Sadly, it won't be possible - the Menu key is designed to move only between tracks and menus. If you are in a track it will take you to a menu, once there, pressing it again willr eturn you to the track.
You need to use the 'return' key to traverse through the menus, but it isn't a robust implementation in DVDSP.
Therefore, the only way to accomplish what you want is to use the Title key on the remote control when in a menu... unless you add a button to each sub menu that jumps to the title menu.

Wrong jump in menu buttons

Similar Messages

Maybe you are looking for