Wrong layout chart with IGS 7.0 and 3.0b webtemplates

Hi,
We just did an upgrade from BW 3.0b to 7.0. We also upgraded te IGS to 7.0. We don't want to upgrade our webtemplates to the new version yet.
However, if we display a chart now, it shows a wrong layout. If we change the IGS back to an old version it gives the right layout again.
Should charts of 3.0b webtemplates work with IGS 7.0? Are there any setting that we can do to make this work?
Thanks for your help!
Guus Berenschot

Hi,
BW < 3.5 used a different chart component of the IGS, i.e. all the customizing settings of your charts are saved in a different format than in 3.5 or 7.0. That's the reason why all these settings have to be converted before using them in your new system.
Please note that you have to use the standalone IGS 6.40 temporarily when calling the migration report. When the migration is finished remove the IGS 6.40 and use IGS 7.00.
Regards, Kai

Similar Messages

  • Why isn't there a chart with ios, mac os and itunes compatibily?

    Since there are so many people who have been screwed over by upgrading to a newer ios without knowing that they would need a different version of iTunes that can only work with a newer Mac os, but their computer cannot run that os, so now they are out of luck, WHY isn't there a chart somewhere that shows the compatibility between ios, itunes, Mac os and even Mac computer versions? The info is available if you search for it separately (lots of searches), but I can't find it all in one place. For example, ios7 works only with itunes 11.1 and up on 10.6.8 and up on an intel Mac. That is really useful for people who want to make sure their whole infrastructure is compatible before they upgrade. Does anyone know if something like this exists anywhere? Thanks.

    sbwinter2 wrote:
    Some of the most useful guides are usually made by users
    I'm sure some people would be very grateful if you went ahead and did the work.
    Best of luck.

  • HT204053 I have reset my apple ID and the password, but I am still getting an error message saying: wrong account associated with the current ID and password! Any thoughts as to why?

    I have reset my apple id and password, but I am still getting an error message indicating, "wrong account associated with this id/password" !!!
    Any thoughts as to why?

    What exactly do you mean by the statement that you have reset your Apple ID and password. I am not familiar with being able to reset and Apple ID.

  • Wrong image size with a Nikon D70 and another issue

    Hi everyone!
    I'm a photography student and I switched a few weeks ago. I've been using Adobe Lightroom under Windows for months, now I'm trying Aperture.
    I own a Nikon D70, which is a 6 Mpix camera. The resolution of the pictures should be 3008x2000 pixels. With Aperture they are 3024x1998... It's *neither the good ratio neither the native resolution* of the camera.
    What should I do?
    Also, although I set up my camera in MTP mode, it *won't work in tethering mode*. It came back from the Nikon service center with a Nikon D70s firmware, but it should work as well, right?
    Thank you for your help!

    Strange! I had tried with the camera in PTP mode a few days ago, it wasn't working. Trying again now and it works! I must have done something wrong. Thank you anyway!
    Then I tried again the Search tool, I didn't noticed the date range restriction on the first time, now I can see a few threads about that "problem". Although I'm really not satisfied with this "issue", it seems to be this way by design and not a bug.
    Thank you everyone for your help!
    (may I delete this thread since it has no interest for other people?)

  • How to limit data range in a Line chart with Time Refresh Control

    Hi All,
    I have a Line chart with Time Refresh Control and I would like to make some constraints to this navigation.
    For example, I would like to limit the user to navigate in a data range of 8 hours.
    Is this posible?
    Thanks in advance

    Hi Pedro,
    as far as I know, this is not possible using the time controls on an iChart. However, you may have some success by using your own time controls which call JavaScript methods exposed by the applet.
    For example, you could begin by hiding the time and calendar buttons on an iChart, and creating some buttons of your own. For instance, to set the start date of a query (and thus the start date of the iChart using the query), you can use the following:
    document.getElementById("appletID").getQueryObject().setStartDate(<date string>);
    Using code like the above (look into the xMII script assistant and documentation), you should be able to build time controls which satisfy your requirements. The exact format of <date string> in the sample above will depend on the date format defined in the query template this script calls.
    Hope this helps,
    Sascha

  • When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified.  There is nothing wrong with my apple id and I do not want to change it.Any suggestions?

    When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified.  There is nothing wrong with my apple id and I do not want to change it.Any suggestions?

    Debi....
    Try "resetting" your Apple ID password >  Apple - My Apple

  • I changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password

    i changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password..
    can anyone help me to solve this issue

    i just opened my ipad, started my apple account/I.D. and realized I put the wrong e mail. I was having trouble correcting my I.D on the Ipad so I went to my laptop and make the proper changes/slash e mail address I wanted for my apple ID. I got back to my ipad and try to download an app I can't because I have to sign in my apple account and I can't because it still has the irrelivant I.D/email address..
    So, i did what you said.. went to setting>app store> tapped on my e mail.. it asked me to sign in (with my invalid emails address showing). I signed in with the password I had created. It said "incorrect".. I went to reset password. I reset password, tried to sign in and it says again "unvalid password".. this is getting irritating.  I have been asking and no one knows what to do.

  • I have an older Macbook pro with a dvi output and I want to watch movies on my tv. I have a dvi to hdmi cable but the only image I get on my TV is my desktop background. None of my movie players with appear on the TV screen. What am I doing wrong?

    I have an older Macbook pro with a dvi output and I want to watch movies on my tv. I have a dvi to hdmi cable but the only image I get on my TV is my desktop background. None of my movie players with appear on the TV screen. What am I doing wrong?

    Hi Maryan,
    Open System Preferences > Displays > select the window for you external monitor > click on the Arrangement tab and check the box next to Mirror Displays. It may be slightly different in Lion, but the idea is the same.

  • Last night as I was setting up the pin I got distracted and entered the wrong one, now I can't access my phone as I don't know what I entered. Is there anyway around this or do I have to wipe my phone and sign in with my Apple ID and restore from icloud??

    Last night as I was setting up the pin I got distracted and entered the wrong one, now I can't access my phone as I don't know what I entered. Is there anyway around this or do I have to wipe my phone and sign in with my Apple ID and restore from icloud??
    I can't ask for help on chat as I'm away from home and don't have the box with me, and obviously can't get the serial number in my phone as I've locked myself out!!
    Any help will be much appreciated!!

    https://support.apple.com/kb/ht1212

  • I am totally frustrated by the fact that now i have gone to iCloud and after a few synchs, my contacts are all mixed up with the wrong information.  For instance, my email and phone number comes up under someone else's name (a thousand contacts)

    I am totally frustrated by the fact that now i have gone to iCloud and after a few synchs, my contacts are all mixed up with the wrong information.  For instance, my email and phone number comes up under someone else's name (a thousand contacts).  I dont know how to repair this.  what a nightmare

    An icloud account is designed to be used by just one user.  If you have given your ID or set up your account on someone else's device, then their data will be mingled with your or worse.

  • My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?

    My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?

    I don't get what you are saying.
    Is this all the same document?
    What version of Pages?
    Have you tried to revert to a previous version?
    Peter

  • Reader X : Wrong Fonts (was working with Reader\Pro 9 and Pro 10)

    Hi all,
    First : this form pdf work with adobe Reader 9 and Acrobat Pro 9\X
    i did a pdf form with scribus, i embed 2 fonts : 3of9barcode and freemono bold fonts.
    (compatibility PDF 1.5 (acrobat 6) )
    My client update to Reader X and the problem is that the fonts are 'squares' and the barcode is text not barcode.
    When i do look at the properties in reader X, it founds the embedded fonts. There is no error when opening it.
    no console errors or Reader error.
    If i open the document with Pro X , there is no problem, the fonts are good. i try to save a copy, an optimized copy, or a copy with limited rights,
    but the result is the same, when i open the pdf with Reader X the fonts are bad.
    i tried ton install the fonts on Windows but it does not help...
    Do you have any clue ???

    I have exactly the same problem!!!
    I create and layout my forms in scribus and adjust them in Adobe 9 Pro. Setting the tab order and having the possibility to make fillable forms saveable are gorgeous. However, people who use ReaderX cannot work with these very forms anymore because there appears only squiggly squary rubbish in the fillable form fields instead of nice and clean Times Now Roman font. In Reader 9 everything worked fine. I cannot force everybody to go back to version 9, in order to be able to work wth the forms.
    It's so annoying, please help.

  • Something went wrong with sync. between pc and Ipad now part of the information is gone on the ipad how do I put the backup from the pc to the ipad

    Something went wrong with sync. between pc and Ipad now part of the information is gone on the Ipad. How do I take the backup of the pc and put it back on the Ipad.

    Same thing just happened to me.  Help!

  • Something went wrong with my apple tv and now it says that it is in retail demo mode. How can i fix it?  I have had it for more than one year without any problem

    something went wrong with my apple tv and now it says that it is in retail demo mode. How can i fix it?  I have had it for more than one year without any problem

    To turn on/off retail mode, go to settings, general, legal.
    Do not open legal, just put the cursor there.
    Then, on the remote, type this sequence : right - right - left - center.
    The AppleTV should reboot.

  • SSRS 2008: how to show an empty chart with legend and x and y axis when no data available

    Hi,
    I am using SSRS 2008, I generated one chart in report designer with the data from Analysis Services (Cube).
    According to the dataset, there is no data returned when I run the query. so when I preview the chart, there is nothing but "no data available" showing on the chart.
    Here I want to know is there any possible to show an empty chart with legend and x and y axis?
    If it is possible, can you tell me how can I make it?
    Best Regards.
    Connie Zhu

    Hi,
    When there is no data, the chart displays the message "no data available". But using a little work around, you can display an empty chart.
    Please find the below steps given to achieve this
    1. Create a new dataset using TSQL to return 1 row of data having the category field and value field set to 0. Add the fields that are necessary for the category fields, series fields and datafields.
       A simple example would be like
       SELECT 'abc' as Category, 0 as Amount
    2. Add a new chart, set the category field to 'Category' and set the data field to Amount from above dataset created in step 1.
    3. In the new chart, right click the category axis and select axis properties, Click on the labels tab, check on
    'Hide axis labels' and then click ok
    4. Now set the Visibility property of both the charts depending on the rows returned from your main dataset
       a. click on your main chart and set its Hidden property to :
    =iif(CountRows("MainDataSet"),false,true) 
       b. click on the new blank chart added and set its Hidden proprety to (the opposite) :
    =iif(CountRows("MainDataSet"),true,false) 
       Note : Please change the dataset name in above expression "MainDataset" to the name of your chart's dataset
    5. Resize the new chart to the same size as your main chart, then position the new chart on the place as the main chart.
       (Note : You can set the position of new chart to be same by copying the location property from the main chart) 
    6. Now run and observe the result. When there are no rows returned by your main dataset, the new chart (the blank chart) should be displayed.
    I've added a working sample of this kind of a report
    here.
    Hope this helps. Please feel free to discuss if you have any questions.
    Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
    BH

Maybe you are looking for

  • XSL and text output

    I tried transforming the following XSL but the characters <, @amp never gets transformed as < , & respectively instead the output has their equivalent character codes. Is there something I am missing ? Sample XSl: <?xml version = '1.0'?> <xsl:stylesh

  • OSX cant open *some* .dmg and .avi files, other open fine

    Hi, Ive encountered a problem with opening files on my new iMac. The problem is some .DMG files and .AVI files are not able to be opened, which have previously been fine. Where as some where fine, and still are. The problem files have white icons and

  • Restoring backed-up iweb

    Hi guys, I need some advice! I recently bought a 1TB firewire drive to back up all my big files to. I used it to make a clean copy of my internal HD using super duper, then installed the OS and wiped my internal HD so I could start afresh. Rather unw

  • CONFLICT BETWEEN FIREWIRE 400 & 800 BUSSES***

    Happy New Year all... My 1.67 Ghz Powerbook's external Firewire 800 drive will not mount if I have a device plugged into it's Firewire 400 port (in this case it's an EyeTV 500 box). Is the use of these ports supposed to be an "either-or" situation, w

  • Can't install the new update Muse CC (2014.3)

    Every time i try to install the new adobe muse update i receive the same error: Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR: -------------------------------------- Summary -----------------------------------