Wrong License Generated

I have generated License for L-FL-CUE-PORT-2= Using PAK in Cisco Licensing Page. Unfortunately Instead of ISM/SRE Module Serial Number I used Router Chassis Serial Number to generate license. Now I am unable to install license. Is it possible to change the license to Module Serial Number. Do I need to have SmartNet in order to achieve this? Please help 

You can just send a email to [email protected] with the actual serial number (show license udi) and PAK, they will provide new file.
Suresh

Similar Messages

  • Wrong license data specified   - MBS 4.6D

    Hello,
    i'm trying to extend my MiniSAP (MBS 4.6D) license for the next period, I enter exactly the data mailed to me, however, receive the following error message:
    saplicense: License not installed
    Wrong license data specified
    Check the specified license data for:
    - typing errors
    - upper / lower characters
    - same values as noted on license fax
    The same result when I enter the given data via a file...
    Before i tried to extend the key with saplicense -install - i execute the DBENV command.
    Does someone have an idea?
    Thanks in advance & best regards,
    Frank

    Hi SDN Team,
    My problem is the same that reported by Frank. Since last week I was demmand in four times a renewall license key for MiniSAP (MBS 4.6D).
    After I'm trying to install license key by transaction SLICENSE and with command saplicense -install but doesnt' accept new license key.
    I'm looking in this forum some people with the same problem. Can we help us to resolve problem?
    Best Resgards,
    DLS

  • Persian Language show wrong (PDF) (generated by BI Publisher)

    Hi,
    When Oracle BI Publisher Generate PDF output show persian characters wrong.
    persian language (Use in Iran , Azarbayjan , Tajikestan ,... ) has 4 characters more than Arabic (cp1256) . this 4 characters is (پ ,ژ,گ,ج) .
    when come (this characters ) in duration word appear a space between word.
    for example word is پشتو But show in PDF پ شتو .
    in HTML,RTF format we don't has this problem only accrue in PDF output .
    This Persian characters :
    U 067E PEH
    U 0686 TCHEH
    U 0698 JEH
    U 06A9 KEHEH
    when we copy پ شتو of Arcobat reader and paste to windows notepad show correctly (پشتو ).
    Please help me how i can solve this problem.
    Regards
    Reza

    I've seen this issue be raised in the past for another language. The advice then was to try copying the fonts in "C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts" to "<JAVA_HOME>/jre/lib/fonts"
    (Thanks to Kevin W -- I copied this advice from him! :) )
    Cheers,
    Jasmine

  • WRONG PLANT GENERATED WITH MATERIAL DOCUMENT IN HU02

    Hi All,
    I am packing Handling unit with HU02 with following options.
    Supplying plant 4140
    Storage loc 2000(FG) to 2100(HU) with Batch number 11.
    After Saving this HU, when i check Material Document in Migo generated for
    above Handling unit, it shows Material From 4340 plant & Sto loc. 2000 to 2100.  I had never entered 4340 plant.
    How this is updating?Any setting is missing? Material is Batch Activated.
    Kindly guide
    Reg
    Jay

    clsoed

  • Wrong license type - Should be unlimited, comes up as 10-clients??

    I have recently rebuilt my schools osx server (10.3.9). I have it set up and it is running fine, except for a problem with the license type. It comes up as a "10-client" license when on the sticker on the install CDs it says unlimited clients.
    Before the server was rebuilt it was running as unlimted clients with the same serial, so I am unsure why it is coming up as a "10-client" license now?
    Cheers.
    Col.

    As far as I know the SN is directly tied to the type of Account it is. Meaning if it says it is a 10-user Serial it is a 10 user serial.
    I would try the following.
    1. Re-enter the SN carefully in Server Admin from the sticker, update and reboot.
    2. If you have a backup of the old 10.3.9 install restore it to a bootable drive (i.e. iPod, External drive, etc.) and just boot up to take a look at the serial number in SA that you say is unlimited.
    3. Double check the sticker that it says "MAC OS X SVR 10.3 UNLIMITED CLIENTS" license. That is exactly how the sticker should read. It must be a 10.3 license.
    3. If you have a legit version and the sticker on the CD/DVD disks says unlimited 10.3 and it still only shows 10-user contact Apple for a fix.

  • I have OsX 10.6.8, and imac 2007-08, and enough disk space to download yosemite but still Apple tells something is wrong and generates a list of maybes but not a specific reason. Any ides as to how to pin point the problem of the upgrade?

    Want to upgrade from 10.6.8 to yosemite  and I have a imac 2007, and enough disk space. but when trying to download, I get a "I can't" due to a list of possible issues, but how to isolate the problem?
    Thanks,
    josefromaptos

    Check that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
    To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
    iMac (Mid 2007 or newer) model number 7,1 or higher
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
    8 GB or more of available space
    Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.      
    Application Compatibility
    Applications Compatibility (2)
    Do a backup before installing.
    If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again.  You can make a bootable USB stick to install using this free program.
    Bootable USB Flash Drive – Diskmaker X

  • Reg: Solution Identifier generator & License Manager

    Hi Friends,
    Can anybody tell me what is the exact use of
    1. Solution Identify
    2. How can I implement Lincese manager service through SDK.
    3. How to add our own license manager service in SAP Service manager. It contains some services like backup service, license manager , event manager etc...
    Thanks & Regards
    Manish

    Hi Manish,
    I'll try to give you a general explanation but for more detail I would say you can contact your local SAP field organisation and there should be someone there who can help you.
    1: The solution identifier is used so that you can code an add-on identifier into your add-on. Any user trying to use this add-on will need to have requested a license off the service marketplace to use it.
    e.g.
    - you apply for a BASIS License for your add-on
    - you then use this BASIS license to generate an add-on identifier in Business One
    - Then you code this add-on identifier into your add-on
    - If a user wants to use this add-on, they must add the BASIS license to their license file when requesting it from the service marketplace
    2: As above. You request a BASIS license, generate an add-on identifier and code this into your add-on.
    3: I don't know of a way to add your own service to the SAP server tools, I do not think it is possible. You can implement your own standalone license service, but it would be more straightforward to implement the SAP BASIS model.
    Hope this helps clarify things,
    Regards,
    Niall

  • Activation based license not recognized by Virtual Machine (Vivado 2014.4)

    Hi,
    I am using an VirtualBox to host a Ubuntu 64-bit Linux machine. And I have a Vivado node-locked license. In the first time, when I tried to generate license and used it with the machine, everything went well. But then I returned the license back to Xilinx, so that I can generate the license again for any other machine.
    Then, the time comes to me that I need to use my Linux VM again. After generating the "Xilinx_license.xml" file via the Xilinx licensing website, the VLM refuses the license with the message:
    Then I tried using command prompt to process the license, but I got the foolowing output:
    di@di-VirtualBox:~$ xlicclientmgr -p ~/Downloads/Xilinx_License.xml
    ERROR: API function 60009 failed, result 51308
    Request generated on a different machine
    Response processing failed.
    The response is not valid for this machine.
    Exit(4) error when processing response.
    So I am now stuck in a state that I have a license generated, but I cannot use it, and I also cannot return it back to Xilinx. I need some help from Xilixn technical support.
    A list of my questions:
    - what did I do wrong so that such an error occurs? ( I was able to use my VM and Vivado without any problem for the first time)
    - how to make VLM recognize this license again?
    - is there anyway to get myself out of the stuck-with-the-license state?
    Many thanks in advance.
    Regards,
    Di Cao

    Hi ,
    The Virtual Machine has never been removed or changed.
    I merely returned the Xilinx license that was once assigned to this Virtual Machine some days ago, and today I tried to generate a license again for the same Virtual Machine.
    Somehow the VLM does not recognize the license.xml at all, and I am now stuck with this license that can neither be recognized nor be returned.
    Is it possible to un-do the current generated license and allow the Xilinx licensing site to generate a new license again?
    Regards,
    Di

  • "Invalid key" error --- License Key for system NSP

    Hello SDN Team,
    I have successfully installed the NW04 ABAP Sneak Preview. Now I'm trying to get a license for it at http://www.sap.com/solutions/netweaver/minisap.epx. I enter all the data, check the License Agreement, hardware key from Transaction SLICENSE, choose the System NSP and send the form.
    I got an email with the following information:
    Your Hardware key      : X17xxxxxxxx
    Your License Key       : BCBHPS8UVTRYQT8TWURZxxxx
    License Expiration date: 20060101
    SID                    : NSP
    Installation-Nr.       : DEMOSYSTEM
    I entered the License Key in the Transaction SLICENSE but I got an error "Invalid key".
    How can i get the correct key?
    Regards,
    James

    Hi SAP,
    I have the same or a similar problem.
    Trying to install the license, I enter the mailed data exactly and properly, however, receive the following error message:
    saplicense: License not installed
    Wrong license data specified
    Check the specified license data for:
    - typing errors
    - upper / lower characters
    - same values as noted on license fax
    The same result when I enter the given data via a file...
    It looks as an error in the generated LKEY field. Really, something has been changed in the procedure and software during the last 3 months (for example, the new entry field is required now in the request form - SND User id).
    Who is responsible and who could help?
    Thanks in advance & best regards,
    Vladimir

  • NI Volume License Server and IPv6 support?

    Please, correct me if I am wrong and realy late with this.
    I am quite sure that Volume License Management connection does not have IPv6 support. Meaning connection between client's License Manager and server's Volume License Service.
    The support would be realy nice feature for companies using Microsoft DirectAccess to allow empployees to use companie's IT resources outside of company network with their work computer. In this case Volume License Server as a resource.
    Yes, there are translators between IPv4 and IPv6, but native support is always the best. And IPv6 is not future technology it is current technology.
    I know that there is 14 days product version specific Backup License in use if there is no connection to server. But this is not good when employee has several versions of LabVIEW and TestStand in use.
    Another work a round would be a Home License generated to a employee's work computer, but that is not really nice.

    Hi JERei,
    Thanks for the feedback. You are correct, VLM does not currently support IPv6. We are currently evaluating adding IPv6 support to our products, but we do not have a definite timeline. If IPv6 support is critical to your application, you should contact your sales representative to discuss your options.

  • License Key For SAP R/3 Enterprise Demo Version

    Hello Basis Gurus,
    I have installed SAP R/3 Enterprise Demo Version in my Notebook.
    When i am trying to login using User ID: SAPUSER getting an error message that ":Logon refused (valid license not installed)"
    SAP R/3 Details:
    Component Version: SAP R/3 Enterprise
    Installation Number: INITIAL
    License expiration: ..----
    Active Hardware Key: C1129820057
    System Number: System No. Empty
    When i am trying to install the License Key at Command Prompt getting the error message that
    Specify your license key:
    LICENSE_KEY   1...5....0....5....0...4
    LICENSE_KEY =
    Wrong license data specified
    >        Check the specified license data for:
    >        - typing errors
    >        - upper / lower characters
    >        - same values as noted on license fax
    How can i get the correct LICENSE_KEY for this demo version for the above hard ware key.
    Please advice urgently..

    to get hardware key:
    saplicense -get
    to get license key:
    https://websmp106.sap-ag.de/licensekeys

  • SAP NetWeaver 7.02 SP7 64 bit AS ABAP Trial Version: License mismatch

    Hello together,
    after installing the wrong license in the AS ABAP 7.02 SP7 64bit Trial system (Win 7 64bit), I am no longer able to activate a temp license or to install the correct license:
    F:\usr\sap\NSP\SYS\exe\uc\NTAMD64>saplikey pf=F:\usr\sap\NSP\SYS\profile\NSP_DVEBMGS00_SERVER01 -get
    Creating temporary shared memory file failed,  rc = 5.,SHM_NAME=F:\sapdb\data\wr
    k\sqldbcttrace.shm,DIRECTORY_NAME=F:\sapdb\data\wrk\
    SAP License Key Administration  -  Copyright (C) 2003 - 2007 SAP AG
    System ID. . . . : NSP
    Hardware Key . . : N0806500786        (of this computer)
    Installation No. : SAP-INTERN         (digitally signed license key)
                       INITIAL            (old license key)
    System No. . . . : 000000000311558752 (digitally signed license key)
    Error *** (old license key)
    Release. . . . . : 720
    Software products: NetWeaver_ADA
    How do I solve this mismatch?
    Thanks, Bernd

    The soluion is:
    In this case, you can only delete the license key directly in the database: first of all, examine the contents of the SAPLIKEY table. This table should contain exactly one record with a LIKEY field that begins with "0002LK", and possibly another record with a LIKEY field that begins with "0002LC". If you find one or both of these records, but no further records, you can delete them using database tools.
    Regards,
    Bernd

  • Updating license key issue

    I am attempting to move the SAP B1 application to a different server (pointing to the same database server).
    In doing so I have been told I needed to request a new license key.  I have done that however when I try to import the license key into the SAP B1 client (from the Administration->License->License Administration program) I get the following error:
    wrong license file; hardware key does not match.
    I retrieved the hardware key from the SAP B1 Server Suite Manager that is running on this new application server (from the Settings on the License Manager service).
    Also, the License Server that appears on the License Administration dialog still points to the original server.  I have tried typing in the new server's name but cannot.
    By the way I am trying to make this change in the QA enviornment.  We are running a W2003 server and serving the SAP B1 client up via citrix.  SAP B1 client and server are installed on the same server.
    Any suggesitons would be helpful.
    Thanks,
    Mike
    Edited by: Mike Hamm on Sep 29, 2009 1:45 AM

    Hi Mike,
    >
    Mike Hamm wrote:
    > How would I check the port? Is that something on the server or in SAP B1?
    Both. In the SAP Business One License Manager ->Settings -> Connection details you might like to change the default port number 30000. In order to check your firewall on the server refer to the documentation of the used firewall.
    >
    Mike Hamm wrote:
    > I do not get any error message when I change the server on the License Administration dialog is: "License server changes will take effect at next logon to a company".  Unfortunately the server name reverts back to the original server name (which is, by the way, still operational--does that make a difference?)
    You can have running the license server on another Server than the one on which SAP Business One Server application is installed. However it will revert back (to last known 'good' license server) as long no valid license file has been importet to the new license server.
    >
    Mike Hamm wrote:
    > When I try to import the license key I received from SAP (after providing the hardware key from the license manager) I get the following error message:  wrong license file; hardware key does not match.
    Try to download the license file directly from the Webpage, sometimes the files get corrupted, if sent by email.
    Further info: Note [776870|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=776870] and note [578256|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=578256]
    Kind regards
    Mario

  • I can't update license for cue 3.2.1

    Hello
    I have unity express 3.2.1. I try to install cue-vm-license_25mbx_ccm_3.2.1.pkg.
    I get this error:
    cue-munich# software install upgrade url ftp://10.0.0.5/cue/cue-vm-license_25mbx_ccm_3.2.1.pkg username bla-la-la password 123
    WARNING:: This command will install the necessary software to
    WARNING:: complete an upgrade. It is recommended that a backup be done
    WARNING:: before installing software.
    Would you like to continue? [n]y
    Downloading ftp cue-vm-license_25mbx_ccm_3.2.1.pkg
    Bytes downloaded : 5307
    Validating package signature ... done
    ERROR: Package requires a previous installer version for non-clean install. You can do clean install or use helper, min version:(2, 0), current version: (2, 4, 0, 4), required version < min compatible version:(2, 4, 0, 1)
    Can someone help me please

    Hi Pavel,
    If you are running this with CME then you are trying to use the wrong license file, note the _ccm_;
    cue-vm-license_xxmbx_ccm_3.2.1.pkg
    License information package for a 12-mailbox version of the Cisco Unity Express with VoiceMail application that works with ***Cisco Unified CallManager. For all Cisco Unity Express modules: AIM-CUE, NM-CUE, NM-CUE-EC & NME-CUE.
    For Callmanager Express - CME it would look like this, note the _cme_
    cue-vm-license_xxmbx_cme_3.2.1.pkg
    Hope this helps!
    Rob

  • Hardware key and license key

    Hi All,
    I have a question about the HW key and license key for SAP on Solaris.
    As currently, we would like to replace the existing hard-disk with a larger one.
    And i would like to know that, can we using the same license generated before, or we need to generate a new one?
    Regards,
    Cheung

    Hi Wing,
    Got no documentation explicit about this, only personal experience. You can look at note 94998, and perhaps this PDF: https://websmp106.sap-ag.de/~sapidb/011000358700005997252005
    Best Regards,
    JC Llanes.

Maybe you are looking for