Wrong metadata shown for some local files
As shown in the first attachment, I have some mp3s for a japanese artist, and one of the tracks spotify wrongly associates it with a completely different track. the title of the track isn't even the same (it is "Please Please", all other details are the same as the surrounding tracks). This I could put up with no problem as it still plays the mp3, the annoying thing for me is that it scrobbles the wrong track to last.fm when i listen to it. The 2nd attachment shows another smaller issue, as they actually match to the correct tracks (even though the spotify linked ones are singles rather than the album) but also provides the same scrobbiling issue since the artist and album names are in english rather than japanese like I have in the id3 tags. An advanced option to prefer local file metadata over spotify metadata would be king here!
Some files when imported into the timeline were shown shorter, because the frame rate that was deduced from the file was way too high. The fix targets this scenario.In fact, there could be cases where the frame rate displayed could be as absurd as 500 fps from a mobile phone camera which is not capable of capturing at that high rate.
So if someone has reported such issues, they could benefit from this. The fix is for both Windows and MAC
Similar Messages
-
i have the new version of iMovie, and when i try to start the program, i can't because it says that it is looking for some movie files from the Iphoto, so all the program is locked up... how can i do to restart the program??
Hi
Did You ever use - iPhoto ?
Did You may be direct iPhoto to a different Photo Library
As iMovie tries to find the appropriate photo library - it can get lost if iPhoto direct it into a Library on a not connected external hard disk or to a strange location - And iMovie HANGS.
Do - When no other program is running that might interfere
• Start iPhoto - BUT NOW KEEP alt-key (option key) DOWN during the full Start-Up process
• Now iPhoto let's You select Photo Library
• Select the one in Your Account / Home folder / Pictures ! !
• Then iPhoto should start up OK
• Now Quit iPhoto
• START iMovie
Does it still hangs - then I would suspect - iMovie Pref. file
If it Run's OK - Then HURRAY !
Yours Bengt W -
Service for delete local files in Business Connector
I have used the "get" service for copy the files in the Business connector, does anybody know if there is any service for delete local files, i have seen the service for delete remote files with ftp, but i don´t know how to delete the copied files in my server.
Thanks in advance
regardsHi Carlos,
For this issue the best choice is create your own Java Service. I attach you the Java code:
Put this code in a new Java Service
boolean success = (new File("filename")).delete();
if (!success) {
// Deletion failed
Before, you must to create an input parameter in the new service where you must to save the file path. Change Filename with the input parameter variable.
It's not difficult.
Best Regards
Ivá -
I'd been using Browserlab successfully today, viewing local files from Dreamweaver CS5. I logged out and then returned later in the day and am now having problems as the Browserlab window is failing to automatically load the local file's URL in the box at the top of Browserlab screen (the URL box just stays blank. Can I manually input the local address and if so can someone advise the general format. I assume something like http://localhost/.... Obviously I will need to input my own file names, but just need the root URL/general format for viewing local files.
ThanksHi flowersplash,
Thank you for your interest in BrowserLab. Please check to see if you have the BrowserLab web site open in another browser or browser tab. You should only have one instance of BrowserLab open at a time. You might also try restarting your browser (all instances) and Dreamweaver and if that doesn't work, the OS.
BrowserLab currently only allows you to specify local or firewalled URLs from Dreamweaver. Directly inputting a URL into the BrowserLab testing interface will test the page from the perspective of a person elsewhere on the Internet. Open the site you want to test in Dreamweaver LiveView, select "Local" in the BrowserLab Panel in Dreamweaver and click the Preview button.
Cheers,
Josh -
The install button is not shown for some apps, the install button is not shown for some apps
the install button is not shown for some apps on my iPad. I tried everything. Nothing work :(
HelpRoukia wrote:
I tried everything.
Define everything -
Why can't I manually fill in info for some WAV files?
I've been importing wave files into itunes and filling in the artist info manually, one cd/playlist at time, with the intent of later converting the entire library to apple lossless. I need to do it this way because importing one CD at a time, I select the whole thing, and then fill in the info for the entire selection at once. If I import a bunch of files first I get a huge disorganized mess because there is no "tag" info. The problem is that, for some reason, artist info entered manually for some WAV files "won't take" but if I change to apple lossless first it will. Can anyone suggest a reason for this inconsistant behavior in the iTunes program?
GerryWAV files don't have ID3 tags, which hold a lot of the song info.
You might want to have a look at this wikipedia entry
http://en.wikipedia.org/wiki/ID3_tag -
Okular freezes for some pdf files
My problem is that Okular freezes for some pdf files, the problem is NOT related to how big files are, or how many pics/raster in them. I have many pdfs that exceeds 90 MB and run smoothly. Moreover, I have also many large djvu files that run smoothly. Evince runs all files smoothly as well. I have the latest stable okular with the latest stable poppler versions as of today.
Okular freezes in a somewhat weird way, if I go down from page x to x+1 in contiuous mode, It freezes when I reach the gray bar that spearates the 2 pages, when I want to go back to page x from page x+1, which it is supposed to be cached and should load smoothly, Okular also freezes at the same place.
My problem happens with small books having almost all text, and also happens with scanned books. The weird thing is that some other scanned books and some other all-text pdfs, e.g. academic papers, runs smoothly.Sounds like a bug. Try to report it to the bug tracker and be sure to add a file that shows the problem so that the devs can backtrace it.
-
Hi!!!
This is my first post. Thanks to all the people here before all.
I have a big problem trying to download a local file to an internal table. I have lines with more than 8000 positions, and i've tried to use WS_UPLOAD, GUI_UPLOAD and SO_OBJECT_UPLOAD, but all of them show me this messages:
- Unable to satisfy send request: 8001 bytes.
¿Do you know any function module (i think it could be OO) that allows me to load this file?
Thanks for all. Bye!Hi
REPORT ZDOWN_UP_LOAD
NO STANDARD PAGE HEADING
LINE-SIZE 255.
Declare Database Objects
tables:
DOKIL,
TRDIR.
Constants
CONSTANTS:
MC_TRDIR_IDENTIFIER(72) TYPE C VALUE '%&%& RDIR',
MC_REPORT_IDENTIFIER(72) TYPE C VALUE '%&%& REPO',
MC_TEXT_IDENTIFIER(72) TYPE C VALUE '%&%& TEXP',
MC_THEAD_IDENTIFIER(72) TYPE C VALUE '%&%& HEAD',
MC_DOC_IDENTIFIER(72) TYPE C VALUE '%&%& DOKL',
MC_TRDIR_SHORT(4) TYPE C VALUE 'RDIR',
MC_REPORT_SHORT(4) TYPE C VALUE 'REPO',
MC_TEXT_SHORT(4) TYPE C VALUE 'TEXP',
MC_THEAD_SHORT(4) TYPE C VALUE 'HEAD',
MC_DOC_SHORT(4) TYPE C VALUE 'DOKP'.
Declare Module level data structures
DATA: BEGIN OF MTAB_PROGRAM_SOURCE OCCURS 0,
LINE(72) TYPE C,
END OF MTAB_PROGRAM_SOURCE.
DATA: MTAB_PROGRAM_TRDIR LIKE TRDIR OCCURS 0 WITH HEADER LINE.
DATA: MTAB_PROGRAM_TEXTS LIKE TEXTPOOL OCCURS 0 WITH HEADER LINE.
DATA: MSTR_THEAD LIKE THEAD.
DATA: BEGIN OF MTAB_PROGRAM_FILE OCCURS 0,
LINE(275) TYPE C,
END OF MTAB_PROGRAM_FILE.
DATA: BEGIN OF MTAB_DIRECTORY OCCURS 0,
NAME LIKE TRDIR-NAME,
DESC(72) TYPE C,
SAVENAME LIKE RLGRAP-FILENAME,
END OF MTAB_DIRECTORY.
DATA: BEGIN OF MTAB_PROGRAM_DOCUMENTATION OCCURS 0,
LINE(255) TYPE C,
END OF MTAB_PROGRAM_DOCUMENTATION.
Selection Screen
*-- Options for upload/download of programs
SELECTION-SCREEN BEGIN OF BLOCK FRM_OPTIONS WITH FRAME TITLE TEXT-UDL.
PARAMETERS:
RB_DOWN RADIOBUTTON GROUP UDL DEFAULT 'X'. " Download reports
SELECTION-SCREEN BEGIN OF BLOCK FRM_TRDIR WITH FRAME TITLE TEXT-DIR.
SELECT-OPTIONS:
S_NAME FOR TRDIR-NAME, " Program Name
S_SUBC FOR TRDIR-SUBC " Program Type
DEFAULT 'F' OPTION EQ SIGN E," Exclude Functions by default
S_CNAM FOR TRDIR-CNAM " Created by
DEFAULT SY-UNAME,
S_UNAM FOR TRDIR-UNAM, " Last Changed by
S_CDAT FOR TRDIR-CDAT, " Creation date
S_UDAT FOR TRDIR-UDAT. " Last update date
SELECTION-SCREEN END OF BLOCK FRM_TRDIR.
*-- Options for uploading programs
PARAMETERS:
RB_UP RADIOBUTTON GROUP UDL. " Upload reports
SELECTION-SCREEN BEGIN OF BLOCK FRM_UPLOAD WITH FRAME TITLE TEXT-UPL.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(29) TEXT-SNG.
PARAMETERS:
RB_FILE RADIOBUTTON GROUP HOW DEFAULT 'X'.
SELECTION-SCREEN COMMENT 33(42) TEXT-FNA.
SELECTION-SCREEN END OF LINE.
PARAMETERS:
RB_LIST RADIOBUTTON GROUP HOW.
SELECTION-SCREEN END OF BLOCK FRM_UPLOAD.
SELECTION-SCREEN END OF BLOCK FRM_OPTIONS.
*-- Options for up/downloading programs
SELECTION-SCREEN BEGIN OF BLOCK FRM_FILEN WITH FRAME TITLE TEXT-FIL.
PARAMETERS:
RB_DOS RADIOBUTTON GROUP FIL DEFAULT 'X', " Save to local
RB_UNIX RADIOBUTTON GROUP FIL, " Save to UNIX
P_PATH LIKE RLGRAP-FILENAME " Path to save files to
DEFAULT 'c:\abap\'.
SELECTION-SCREEN END OF BLOCK FRM_FILEN.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_NAME-LOW.
CALL FUNCTION 'F4_PROGRAM'
EXPORTING
OBJECT = S_NAME-LOW
SUPPRESS_SELECTION = 'X'
IMPORTING
RESULT = S_NAME-LOW
EXCEPTIONS
OTHERS = 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_NAME-HIGH.
CALL FUNCTION 'F4_PROGRAM'
EXPORTING
OBJECT = S_NAME-HIGH
SUPPRESS_SELECTION = 'X'
IMPORTING
RESULT = S_NAME-HIGH
EXCEPTIONS
OTHERS = 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_UNAM-LOW.
PERFORM GET_NAME USING 'S_UNAM-LOW'
CHANGING S_UNAM-LOW.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_UNAM-HIGH.
PERFORM GET_NAME USING 'S_UNAM-HIGH'
CHANGING S_UNAM-HIGH.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CNAM-LOW.
PERFORM GET_NAME USING 'S_CNAM-LOW'
CHANGING S_CNAM-LOW.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CNAM-HIGH.
PERFORM GET_NAME USING 'S_CNAM-HIGH'
CHANGING S_CNAM-HIGH.
TOP-OF-PAGE.
IF RB_LIST = 'X'.
FORMAT COLOR COL_HEADING.
NEW-LINE.
WRITE: AT 3 TEXT-H01,
AT 15 TEXT-H03.
FORMAT COLOR OFF.
ENDIF.
AT LINE-SELECTION.
CHECK RB_LIST = 'X'. " only do in list mode
READ LINE SY-CUROW FIELD VALUE MTAB_DIRECTORY-SAVENAME.
*-- Read file into an internal table
PERFORM READ_REPORT_FROM_DISK TABLES MTAB_PROGRAM_FILE
USING MTAB_DIRECTORY-SAVENAME.
*-- Split table into TADIR entry, report lines, and report text
PERFORM SPLIT_INCOMING_FILE TABLES MTAB_PROGRAM_FILE
MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
CHANGING TRDIR
MSTR_THEAD.
*-- Save all of the data
PERFORM INSERT_NEW_REPORT TABLES MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
USING TRDIR
MSTR_THEAD.
Start of processing
START-OF-SELECTION.
FORMAT COLOR COL_NORMAL.
IF RB_DOWN = 'X'.
PERFORM DOWNLOAD_REPORTS.
ELSEIF RB_UP = 'X'.
PERFORM UPLOAD_REPORTS.
ENDIF.
END-OF-SELECTION.
IF RB_DOWN = 'X'.
CONCATENATE P_PATH
'directory.txt'
INTO P_PATH.
PERFORM SAVE_TABLE_TO_FILE TABLES MTAB_DIRECTORY
USING P_PATH.
ENDIF.
FORM UPLOAD_REPORTS *
FORM UPLOAD_REPORTS.
*-- Can upload a reports entered in selection criteria or
*-- select from a list. List can be from index.txt in same directory
*-- (created by the download) or by reading the first line of each file
*-- in the directory.
IF RB_FILE = 'X'. " Upload single program from a file
*-- Read file into an internal table
PERFORM READ_REPORT_FROM_DISK TABLES MTAB_PROGRAM_FILE
USING P_PATH.
*-- Split table into TADIR entry, report lines, and report text
PERFORM SPLIT_INCOMING_FILE TABLES MTAB_PROGRAM_FILE
MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
CHANGING TRDIR
MSTR_THEAD.
*-- Save all of the data
PERFORM INSERT_NEW_REPORT TABLES MTAB_PROGRAM_SOURCE
MTAB_PROGRAM_TEXTS
MTAB_PROGRAM_DOCUMENTATION
USING TRDIR
MSTR_THEAD.
ELSEIF RB_LIST = 'X'. " Show list for user to choose from
*-- get list of report names/descriptions from directory text
CONCATENATE P_PATH
'directory.txt'
INTO P_PATH.
PERFORM READ_REPORT_FROM_DISK TABLES MTAB_DIRECTORY
USING P_PATH.
SORT MTAB_DIRECTORY.
*-- Write out list of report names/descriptions
LOOP AT MTAB_DIRECTORY.
WRITE:
/ MTAB_DIRECTORY-NAME UNDER TEXT-H01,
MTAB_DIRECTORY-DESC UNDER TEXT-H03,
MTAB_DIRECTORY-SAVENAME.
ENDLOOP.
*-- Process user selections for reports to upload.
ENDIF.
ENDFORM. " upload_reports
FORM DOWNLOAD_REPORTS *
From the user selections, get all programs that meet the *
criteria, and save them in ftab_program_directory. *
Also save the report to disk. *
FORM DOWNLOAD_REPORTS.
DATA:
LC_FULL_FILENAME LIKE RLGRAP-FILENAME.
*-- The table is put into an internal table because the program will
*-- abend if multiple transfers to a dataset occur within a SELECT/
*-- ENDSELCT (tested on 3.1H)
SELECT * FROM TRDIR
INTO TABLE MTAB_PROGRAM_TRDIR
WHERE NAME IN S_NAME
AND SUBC IN S_SUBC
AND CNAM IN S_CNAM
AND UNAM IN S_UNAM
AND CDAT IN S_CDAT
AND UDAT IN S_UDAT.
LOOP AT MTAB_PROGRAM_TRDIR.
*-- Clear out text and source code tables
CLEAR:
MTAB_PROGRAM_FILE,
MTAB_PROGRAM_SOURCE,
MTAB_PROGRAM_TEXTS,
MTAB_PROGRAM_DOCUMENTATION.
REFRESH:
MTAB_PROGRAM_FILE,
MTAB_PROGRAM_SOURCE,
MTAB_PROGRAM_TEXTS,
MTAB_PROGRAM_DOCUMENTATION.
*-- Get the report
READ REPORT MTAB_PROGRAM_TRDIR-NAME INTO MTAB_PROGRAM_SOURCE.
*-- Get the text for the report
READ TEXTPOOL MTAB_PROGRAM_TRDIR-NAME INTO MTAB_PROGRAM_TEXTS.
*-- Get the documentation for the report
CLEAR DOKIL.
SELECT * UP TO 1 ROWS FROM DOKIL
WHERE ID = 'RE'
AND OBJECT = MTAB_PROGRAM_TRDIR-NAME
AND LANGU = SY-LANGU
AND TYP = 'E'
ORDER BY VERSION DESCENDING.
ENDSELECT.
*-- Documentation exists for this object
IF SY-SUBRC = 0.
CALL FUNCTION 'DOCU_READ'
EXPORTING
ID = DOKIL-ID
LANGU = DOKIL-LANGU
OBJECT = DOKIL-OBJECT
TYP = DOKIL-TYP
VERSION = DOKIL-VERSION
IMPORTING
HEAD = MSTR_THEAD
TABLES
LINE = MTAB_PROGRAM_DOCUMENTATION
EXCEPTIONS
OTHERS = 1.
ENDIF.
*-- Put the report code and texts into a single file
*-- Put the identifier line in so that the start of the TRDIR line
*-- is marked
CONCATENATE MC_TRDIR_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the TRDIR line
MTAB_PROGRAM_FILE-LINE = MTAB_PROGRAM_TRDIR.
APPEND MTAB_PROGRAM_FILE.
*-- Put the identifier line in so that the start of the report code
*-- is marked
CONCATENATE MC_REPORT_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the report code
LOOP AT MTAB_PROGRAM_SOURCE.
MTAB_PROGRAM_FILE = MTAB_PROGRAM_SOURCE.
APPEND MTAB_PROGRAM_FILE.
ENDLOOP.
*-- Put the identifier line in so that the start of the report text
*-- is marked
CONCATENATE MC_TEXT_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the report texts
LOOP AT MTAB_PROGRAM_TEXTS.
MTAB_PROGRAM_FILE = MTAB_PROGRAM_TEXTS.
APPEND MTAB_PROGRAM_FILE.
ENDLOOP.
*-- Put the identifier line in so that the start of the THEAD record
*-- is marked
CONCATENATE MC_THEAD_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
MTAB_PROGRAM_FILE = MSTR_THEAD.
APPEND MTAB_PROGRAM_FILE.
*-- Put the identifier line in so that the start of the report
*-- documentation is marked
CONCATENATE MC_DOC_IDENTIFIER
MTAB_PROGRAM_TRDIR-NAME
INTO MTAB_PROGRAM_FILE-LINE.
APPEND MTAB_PROGRAM_FILE.
*-- Add the report documentation
LOOP AT MTAB_PROGRAM_DOCUMENTATION.
MTAB_PROGRAM_FILE = MTAB_PROGRAM_DOCUMENTATION.
APPEND MTAB_PROGRAM_FILE.
ENDLOOP.
*-- Make the fully pathed filename that report will be saved to
CONCATENATE P_PATH
MTAB_PROGRAM_TRDIR-NAME
'.txt'
INTO LC_FULL_FILENAME.
PERFORM SAVE_TABLE_TO_FILE TABLES MTAB_PROGRAM_FILE
USING LC_FULL_FILENAME.
*-- Write out message with Program Name/Description
READ TABLE MTAB_PROGRAM_TEXTS WITH KEY ID = 'R'.
IF SY-SUBRC = 0.
MTAB_DIRECTORY-NAME = MTAB_PROGRAM_TRDIR-NAME.
MTAB_DIRECTORY-DESC = MTAB_PROGRAM_TEXTS-ENTRY.
MTAB_DIRECTORY-SAVENAME = LC_FULL_FILENAME.
APPEND MTAB_DIRECTORY.
WRITE: / MTAB_PROGRAM_TRDIR-NAME,
MTAB_PROGRAM_TEXTS-ENTRY(65) COLOR COL_HEADING.
ELSE.
MTAB_DIRECTORY-NAME = MTAB_PROGRAM_TRDIR-NAME.
MTAB_DIRECTORY-DESC = 'No description available'.
MTAB_DIRECTORY-SAVENAME = LC_FULL_FILENAME.
APPEND MTAB_DIRECTORY.
WRITE: / MTAB_PROGRAM_TRDIR-NAME.
ENDIF.
ENDLOOP.
ENDFORM. " BUILD_PROGRAM_DIRECTORY
FORM SAVE_TABLE_TO_FILE *
--> FTAB_TABLE *
--> F_FILENAME *
FORM SAVE_TABLE_TO_FILE TABLES FTAB_TABLE
USING F_FILENAME.
IF RB_DOS = 'X'. " Save file to presentation server
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = F_FILENAME
FILETYPE = 'ASC'
TABLES
DATA_TAB = FTAB_TABLE
EXCEPTIONS
OTHERS = 4.
IF SY-SUBRC NE 0.
WRITE: / 'Error opening dataset' COLOR COL_NEGATIVE,
F_FILENAME COLOR COL_NEGATIVE.
ENDIF.
ELSE. " Save file to application serve
OPEN DATASET F_FILENAME FOR OUTPUT IN TEXT MODE.
IF SY-SUBRC = 0.
LOOP AT FTAB_TABLE.
TRANSFER FTAB_TABLE TO F_FILENAME.
IF SY-SUBRC NE 0.
WRITE: / 'Error writing record to file;' COLOR COL_NEGATIVE,
F_FILENAME COLOR COL_NEGATIVE.
ENDIF.
ENDLOOP.
ELSE.
WRITE: / 'Error opening dataset' COLOR COL_NEGATIVE,
F_FILENAME COLOR COL_NEGATIVE.
ENDIF.
ENDIF. " End RB_DOS
ENDFORM. " SAVE_PROGRAM
FORM READ_REPORT_FROM_DISK *
Read report into internal table. Can read from local or *
remote computer *
FORM READ_REPORT_FROM_DISK TABLES FTAB_TABLE
USING F_FILENAME.
DATA:
LC_MESSAGE(128) TYPE C.
CLEAR FTAB_TABLE.
REFRESH FTAB_TABLE.
IF RB_DOS = 'X'.
TRANSLATE F_FILENAME USING '/\'. " correct slash for Dos PC file
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = F_FILENAME
FILETYPE = 'ASC'
TABLES
DATA_TAB = FTAB_TABLE
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
OTHERS = 8.
IF SY-SUBRC >< 0.
WRITE: / 'Error reading file from local PC' COLOR COL_NEGATIVE.
ENDIF.
ELSEIF RB_UNIX = 'X'.
TRANSLATE F_FILENAME USING '\/'. " correct slash for unix
OPEN DATASET F_FILENAME FOR INPUT MESSAGE LC_MESSAGE IN TEXT MODE.
IF SY-SUBRC = 0.
DO.
READ DATASET F_FILENAME INTO FTAB_TABLE.
IF SY-SUBRC = 0.
APPEND FTAB_TABLE.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET F_FILENAME.
ELSE.
WRITE: / 'Error reading file from remote computer'
COLOR COL_NEGATIVE,
/ LC_MESSAGE,
/ F_FILENAME.
SY-SUBRC = 4.
ENDIF.
ENDIF.
ENDFORM. " READ_REPORT_FROM_DISK
FORM SPLIT_INCOMING_FILE *
--> FTAB_PROGRAM_FILE *
--> FTAB_PROGRAM_SOURCE *
--> ` *
--> FTAB_PROGRAM_TEXTS *
FORM SPLIT_INCOMING_FILE TABLES FTAB_PROGRAM_FILE
STRUCTURE MTAB_PROGRAM_FILE
FTAB_PROGRAM_SOURCE
STRUCTURE MTAB_PROGRAM_SOURCE
FTAB_PROGRAM_TEXTS
STRUCTURE MTAB_PROGRAM_TEXTS
FTAB_PROGRAM_DOCUMENTATION
STRUCTURE MTAB_PROGRAM_DOCUMENTATION
CHANGING FSTR_TRDIR
FSTR_THEAD.
DATA:
LC_DATATYPE(4) TYPE C, " Type of data, REPO, TEXP, RDIR
LC_PROGRAM_FILE LIKE MTAB_PROGRAM_FILE.
LOOP AT FTAB_PROGRAM_FILE.
LC_PROGRAM_FILE = FTAB_PROGRAM_FILE.
CASE LC_PROGRAM_FILE(9).
WHEN MC_TRDIR_IDENTIFIER.
LC_DATATYPE = MC_TRDIR_SHORT.
WHEN MC_REPORT_IDENTIFIER.
LC_DATATYPE = MC_REPORT_SHORT.
WHEN MC_TEXT_IDENTIFIER.
LC_DATATYPE = MC_TEXT_SHORT.
WHEN MC_DOC_IDENTIFIER.
LC_DATATYPE = MC_DOC_SHORT.
WHEN MC_THEAD_IDENTIFIER.
LC_DATATYPE = MC_THEAD_SHORT.
WHEN OTHERS. " Actual contents of report, trdir, or text
CASE LC_DATATYPE.
WHEN MC_TRDIR_SHORT.
FSTR_TRDIR = FTAB_PROGRAM_FILE.
WHEN MC_REPORT_SHORT.
FTAB_PROGRAM_SOURCE = FTAB_PROGRAM_FILE.
APPEND FTAB_PROGRAM_SOURCE.
WHEN MC_TEXT_SHORT.
FTAB_PROGRAM_TEXTS = FTAB_PROGRAM_FILE.
APPEND FTAB_PROGRAM_TEXTS.
WHEN MC_THEAD_SHORT.
FSTR_THEAD = FTAB_PROGRAM_FILE.
WHEN MC_DOC_SHORT.
FTAB_PROGRAM_DOCUMENTATION = FTAB_PROGRAM_FILE.
APPEND FTAB_PROGRAM_DOCUMENTATION.
ENDCASE.
ENDCASE.
ENDLOOP.
ENDFORM. " SPLIT_INCOMING_FILE
FORM INSERT_NEW_REPORT *
--> FTAB_PROGRAM_SOURCE *
--> FTAB_PROGRAM_TEXTS *
--> F_TRDIR *
FORM INSERT_NEW_REPORT TABLES FTAB_PROGRAM_SOURCE
STRUCTURE MTAB_PROGRAM_SOURCE
FTAB_PROGRAM_TEXTS
STRUCTURE MTAB_PROGRAM_TEXTS
FTAB_PROGRAM_DOCUMENTATION
STRUCTURE MTAB_PROGRAM_DOCUMENTATION
USING FSTR_TRDIR LIKE TRDIR
FSTR_THEAD LIKE MSTR_THEAD.
DATA:
LC_OBJ_NAME LIKE E071-OBJ_NAME,
LC_LINE2(40) TYPE C,
LC_ANSWER(1) TYPE C.
*-- read trdir to see if the report already exists, if it does, prompt
*-- user to overwrite or abort.
SELECT SINGLE * FROM TRDIR WHERE NAME = FSTR_TRDIR-NAME.
IF SY-SUBRC = 0. " Already exists
CONCATENATE 'want to overwrite report'
FSTR_TRDIR-NAME
INTO LC_LINE2 SEPARATED BY SPACE.
CONCATENATE LC_LINE2
INTO LC_LINE2.
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
DEFAULTOPTION = 'N'
TEXTLINE1 = 'The selected report already exists, do you'
TEXTLINE2 = LC_LINE2
TITEL = 'Report already exists'
CANCEL_DISPLAY = SPACE
IMPORTING
ANSWER = LC_ANSWER
EXCEPTIONS
OTHERS = 1.
ELSE.
LC_ANSWER = 'J'.
ENDIF.
IF LC_ANSWER = 'J'.
*-- Create the TADIR entry. (TRDIR entry created by INSERT REPORT)
LC_OBJ_NAME = TRDIR-NAME.
CALL FUNCTION 'TR_TADIR_POPUP_ENTRY_E071'
EXPORTING
WI_E071_PGMID = 'R3TR'
WI_E071_OBJECT = 'PROG'
WI_E071_OBJ_NAME = LC_OBJ_NAME
WI_TADIR_DEVCLASS = '$TMP'
EXCEPTIONS
EXIT = 3
OTHERS = 4.
IF SY-SUBRC = 0.
*-- Create Report
INSERT REPORT FSTR_TRDIR-NAME FROM FTAB_PROGRAM_SOURCE.
*-- Create Texts
INSERT TEXTPOOL FSTR_TRDIR-NAME FROM FTAB_PROGRAM_TEXTS
LANGUAGE SY-LANGU.
*-- Save Documentation
CALL FUNCTION 'DOCU_UPDATE'
EXPORTING
HEAD = FSTR_THEAD
STATE = 'A'
TYP = 'E'
VERSION = '1'
TABLES
LINE = FTAB_PROGRAM_DOCUMENTATION
EXCEPTIONS
OTHERS = 1.
ELSE.
WRITE: / 'Error updating the TADIR entry' COLOR COL_NEGATIVE,
'Program' COLOR COL_NEGATIVE INTENSIFIED OFF,
FSTR_TRDIR-NAME, 'was not loaded into SAP.'
COLOR COL_NEGATIVE INTENSIFIED OFF.
ENDIF.
ELSE.
WRITE: / FSTR_TRDIR-NAME COLOR COL_NEGATIVE,
'was not uploaded into SAP. Action cancelled by user'
COLOR COL_NEGATIVE INTENSIFIED OFF.
ENDIF.
ENDFORM. " INSERT_NEW_REPORT
FORM GET_NAME *
--> VALUE(F_FIELD) *
--> F_NAME *
FORM GET_NAME USING VALUE(F_FIELD)
CHANGING F_NAME.
DATA: LTAB_FIELDS LIKE DYNPREAD OCCURS 0 WITH HEADER LINE,
LC_PROG LIKE D020S-PROG,
LC_DNUM LIKE D020S-DNUM.
TRANSLATE F_FIELD TO UPPER CASE.
refresh ltab_fields.
LTAB_FIELDS-FIELDNAME = F_FIELD.
append ltab_fields.
LC_PROG = SY-REPID .
LC_DNUM = SY-DYNNR .
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = LC_PROG
DYNUMB = LC_DNUM
TABLES
dynpfields = ltab_fields
EXCEPTIONS
OTHERS = 01.
read table ltab_fields index 1.
IF SY-SUBRC EQ 0.
F_NAME = LTAB_FIELDS-FIELDVALUE.
refresh ltab_fields.
ENDIF.
CALL FUNCTION 'F4_USER'
EXPORTING
OBJECT = F_NAME
IMPORTING
RESULT = F_NAME.
ENDFORM. " GET_NAME
This is the entire program.hope it helops you.
Reward if useful
Regards
divya -
Cut, Copy, and Paste doesn't work for some Project files
We have some Project files where the Cut, Copy, and Paste function is not working. Suspecting corruption, I tried doing a "Save for Sharing", to no avail.
Is there a switch setting that we are missing?
We are using Project Server v2010 with SP2. Our Project Pro clients are on SP2.Hi Chris,
It could be due to a enterprise global corruption. Does it happen on a specific enterprise view? Does it work well in the default Gantt view?
Try to open the enterprise global and make a copy of the table with the same fields and attributes, then replace the old table with the new one in all the relevant views.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
When trying to create or update Azure RemoteApp collections that use a template image for some non-EN-US locales, it might fail with error "DNS server could not be reached". You might also see error code "DnsNotReachable".
Cause: There was a issue in Azure in which decimal punctuation was not treated properly if the locale of the template image used a comma (,) instead of a period (.).
Workaround: Before a fix was applied, the workaround was to use template images based on a locale that uses a period to delimit decimals, such as EN-US.
Resolution: As of March 19, 2015, a fix for this issue has been applied to Azure. You should once again be able to create collections from template images that use non-EN-US locales. If you continue to have this problem, please
try the workaround. If that works and the only difference in the template images is the locale, please email remoteappforum (at Microsoft). If the workaround does not work, the issue is likely caused by a DNS configuration issue such as:
No valid forwarders to public DNS servers configured on your internal DNS server(s).
A valid internal DNS server is not specified on your Azure RemoteApp VNet.
A VNet or internal network configuration issue is preventing the internal DNS servers from be reached by the VMs in the RemoteApp collection. -
Source Reformat menu item disabled for some XML files, but not all
For some reason, the 'Reformat' option isn't available for some of my XML files (in Source menu it's disabled, in the right-click pop up menu it's not even there). For example in my META-INF folder it's enabled for .wsdl files but not .xml files. In the same project, it's enabled for all .xml files in the WEB-INF folder.
Any idea what's going on?
TIAThanks to everyone for their response. But - it is NOT a copyright issue , it is NOT a DRM issue, it is not a Faber College double secret probation encoding issue.
This is a simple .wmv file, that I have copied, burned, created a disk image, made a copy of and sent to the UK, Germany, Ireland and even New Jersey. It has been played on a MacBook Pro, a MacBook, a Dell whatever, a Sony stand alone DVD player, an LG DVD player. At least three nieces or nephews, and at least 2 canines have put it through ISO 9XXX rigors.
The problem is that Apple Quick Time 7 Pro with Flip4Mac Pro "can't handle it"
It opens fine, it plays fine --- but when I try to "output" it via the FILE menu - all of the options
Share ...
Export ...
Export to Web ...
are greyed out.
I know nothing abour codecs and wrappers but I tihnk that this is the problem.
What should I know about the file?
Ffor example, years ago, all you needed to know about a Mac file was the "Creator" and the "Type" - both were 4 character codes. something like ADOB for Adobe and PMK2 for Pagemaker 2.0.
Any help identifying the file and what I can use to get it onto my iPhone will be appreciated.
Thank you. -
Icon previews wont show for some mp3 files
For some reason I have about 30 albums (out of around 1000...which isn't too bad of a ratio) that wont show the album art for the icon preview. Instead it shows an image of an old iTunes logo, I can't remember which version of iTunes, but it's the version that has a green note on top of the disc. Is there a way to fix this? Thanks.
Do you have an album specified for the mp3 song. I've noticed that if I only have a couple of songs for an artist and none has the album specified, they don't always show up. If I add the album, they will sync the next time. Hope this helps.
-
Getting Revision status "GENWWW" for some pdf files
Hi all,
We are using Stellent as a content manager. some times we are getting one problem with pdf files, some pdf files are not getting indexed and they getting stuck in "GENWWW".
Could any one tell how to solve this issue?
Thanks in advance!!!Hallo..
Please check the repository manager of your content server..
Please rebuild the indexer..
Best regards.. -
DNG converter don't work for some RW2-files
Hi,
i found out, that there ist now direct support from CS4 to my new Lumix LX5. :-(
In some forums i got the hint to use the free DNG converter. that works for most of the files, but some rw2's it can't convert. yesterday i made 10 pictures and the converter only identificate 7 of them. The only thing i noticeed ist, that this files are "only" 7MB. The others are 10MB. When i use irfanview to look the rw2's are no problems. the pictures are all very good. somebody an idea whats wrong with the 3?
Thanks
pittip
sorry for my english, but i hope you understand me!??I don't know anything at all about your file format, but it sounds as if there is an option to create compressed raw files. I know Canon has this option. It may be that somehow you used this compressed option, assuming that there is one, and it may be that the DNG converter does not support the compressed raw format. If not, maybe someone else will have a better answer.
-
No thumbnails for some .mov files Bridge CS5
I'm using Bridge CS5 to organise some video which has been digitised from a sony camera in File Maker Pro X. My operating system is Mac OS X. I have Quicktime player 10.1 and have just checked for updates.
Some of my .mov files show thumbnails which can be watched in Bridge. Other folders just show the thumbnails as black rectangles - these can be watched in a pop up window but not directly in the Bridge preview panel.
The files were all digitised in the same way and recorded on the same camera so should be the same format.
After looking at discussions on here I have tried updating QuickTime and clearing the cache but no dice.
Any suggestions?
Thanks,
ClaireThat is odd that if it was recorded on same camera they are different. I do know that the thumbnail is a complex issue. A little foggy on this as it has been awhile, but if you get a black thumb it is the way the marker of the first frame is recorded. In some cases this shows a black frame. Hope this gives you some clue to do a web search for the real answer.
Maybe you are looking for
-
How to invoke JavaScript for Premiere Pro CC?
Hi, I am new to Adobe CC products/scripting and I'm trying to control Adobe Premiere Pro CC from another desktop application. Using ExtendScript Toolkit, from its UI, I can invoke JavaScript commands or files. But I can't find any way for my desktop
-
Dear Gurus, I need to get the list of purchase groups with details. This is required for User, SO it can not be from SPRO. Also not from MM03 OR XK03 which will show drop down list on purchase group field. Is there any way I can get list of purchase
-
I have a new hp 2050 printer and received a 10.0000 supply memory error message. Can anyone tell me what this means and how to fix it?
-
Setting the color of the window title in Forms 6i
How does one control or set the color of the title of the MDI and module windows gordon [email protected]
-
Unable to activate iphone and ipad
Both my iphone and ipad displayed a message saying the the software is out of date and the device must be activated. But I cannot activate either one. I just keep recieving a message saying, "Your iPhone could not be activated because the activat