Wrong mobile number sent for keychain setup on iPhone

hi can anyone help I tried to set up my keychain on iPhone and was sent a code to a mobile number that isn't mine. I have checked the number on my iMac keychain set up and that is my correct mobile number

If you went to System Preferences>iCloud on your Mac, then clicked Account Details and it shows the correct number under Verification, then that is the number the verification code should be sent to. If it is sending to the wrong number, you might try changing it on your Mac to some other number, then changing it back to the correct number and trying again to see if it works properly this time. If the problem persists, you'll probably have to contact Apple for assistance: http://www.apple.com/support/icloud/contact/.

Similar Messages

Wrong mobile number not in my profile

My Husband has advised me that his mobile number is showing up against my contact in his Skype. It is showing up as 'call mobile 2'. I have gone over my profile and cannot find it. I removed my correct mobile number from my Skype profile but that only meant my correct number disappeared from my contact - my contact on my friends still has my husbands mobile number. How do I fix this?

@blah7:
No problem, glad I could help. I wouldn't recommend Doctoring your phone unless there is another problem that warrants that troubleshooting step. I just think that if you ever have to sign out of your profile through a partial erase or webOS Doctor, that likely your phone number would update at that point.
You're not having a problem right now, so "If it's not broke..."
TreoAide

Need help receiving the "verification code" for Keychain setup.

Have 15"MacBook Pro" and Iphone 4-S. I am trying to set up Keychain. Verification Code notice says it has been sent to my iPhone. I never receive it.have tried numerous times, no luck.

I assume you have checked that you have the correct country and phone number entered.

TS4644 I put the wrong phone number in iCloud keychain.

How can I change the phone number that I put when setting up iCloud keychain?

iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Make sure the phone number under Verification Number is correct. If not, enter another phone number.
OS X Mavericks v10.9 or later: Choose Apple () > System Preferences. Click iCloud, then click Account Details. Make sure the phone number listed under Verification number is correct. If not, enter another phone number.

Raise Error Message in ESS for invalid Mobile number IT0105 - 9004

Hi Experts,
I was asked to put a small validation on mobile number being entered by user in his personal details (to check country code).
As we are using both PA30 and ESS, I have implemented both the BADI's
HRPAD00INFTY (for PA30) and HRPAD00INFTYDB (under enhancement spot HRPAD00INFTYBL) for ESS.
My first one is working fine and stops user from entering wrong mobile number.
Coming onto second one for ESS, I have written my coding in the method IF_EX_HRPAD00INFTYDB~UPDATE_DB as follows
    CASE infty.
    handle infotype 0105
      WHEN '0105'.
        CASE subty.
          WHEN '9004'.
            ASSIGN operation-old_pnnnn->* TO <old_p0105>.
            ASSIGN operation-new_pnnnn->* TO <new_p0105>.
            ASSIGN operation-new_psref->* TO <new_psref>.
            ASSIGN operation-old_psref->* TO <old_psref>.
            CASE operation-opera.
        UPDATE
              WHEN if_hrpa_masterdata_db=>update_operation.
                lv_prefix1 = <new_p0105>-usrid+0(4).
                IF lv_prefix1 EQ '9715'.
                  lv_length = STRLEN( <new_p0105>-usrid ).
                  lv_length = lv_length - 4.
                  IF lv_length NE 12.
                    RAISE EXCEPTION TYPE cx_hrpa_violated_assertion.
                  ENDIF.
                ELSE.
                    RAISE EXCEPTION TYPE cx_hrpa_violated_assertion.
                ENDIF.
Now though this method is getting trigged and doing the validation perfectly, it is resulting in RUNTIME ERROR due to "RAISE EXCEPTION TYPE cx_hrpa_violated_assertion" which is un-caught.
Can any one please let me know how to send back the error message without runtime error so that user has clear knowledge of mistake that he has done.
Appreciate any help in this regard,
Thanks,
Lakshmi Narayana

Why don't you use HRPAD00INFTYUI instead?
~Suresh

Messages: adding mobile number

I did something really silly today. On my phone I added an email address (my appleID) which could be used to send from if needed. The result was that my mobile number was immediately disabled as an option to send from (let alone the preferred option) and it was removed as one of the options from my computer messages account. It has also been removed from my ipads.
I am now having a brain **** and have no clue how to bring that number back. Its my preferred method to send from the mobile number, and my friends quickly get tired of trying to work out which conversation they need to send to if they want to contact me.
Please. someone remind me how to get that mobile number functioning for messages on computer and ipad.
TIA
Sue

And the solution (for those others who also seem to want it) is at the bottom of the page at
http://support.apple.com/kb/HT5538

Error "Sorry, something's wrong. We can't find a mobile number for this account"

Hi, I received a Summer SIM yesterday (the 100GB/month SIM) and put it into my iPhone 4S. I registered with the EE website and received the verification text, all good so far... When I go to top-up my account online with £10 it comes up with a red error message at the top of the screen: "Sorry, something's gone wrong""We can't find a mobile number for this account. Please associate one with it" screenshot:http://i.imgur.com/nt4Q5sA.png Yet despite this if I look in "my account" it lists my account number and mobile number ( https://myaccount.ee.co.uk/my-account/ ) I tried topping up anyway (despite the red warning) but it just gave me an error at the end ("TOP UP MY DEVICE - ERROR") I also tried going via http://ee.co.uk/ee-and-me/top-up-pay-as-you-go but again I got an error I don't have any credit on my new SIM so I can't call and pay 25p to speak to someone - are there any mods/customer service people on the board that can sort out my account? This is not a great start to using the EE network :/

Hi, thanks for the reply Some other responses to the same question posed on the forum have been replied to by a mod asking the original poster to PM them (and I assume they were able to fix the problem?) >>Did you set up this a/c separate from any other a/c's you may have? No - this is the only EE account I have, created it last night and verified the mobile number by text. >>No one here can have access to your a/c. You need to phone EE. The problem is to speak to someone you need 25p credit on your SIM (which you won't have if you're a brand new customer wanting to top up for the first time) I've found a mobile number for customer services (07953 966250) on the forum that I called from a different mobile and after 15minutes on the phone they have now topped up £10 on my account. I checked and the red warning no longer appears on the top up page. I'm still waiting to see if the "SUMMER100" promo has been properly applied and if the " STOP PACK" / "YES" works, but at least I am now over the first hurdle.

How do I change the secure phone number for keychain?

Hi
I was setting up keychain and put in the wrong phone number. Now some random keeps getting my Verification Code for Keychain sent to them.
How do I change this please?!
Thank you!

To change the number on (from http://support.apple.com/kb/TS4644):
Devices using iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Check that the phone number listed under Verification Number is correct. If not, enter another phone number.
Macs using OS X Mavericks v10.9 or later: Choose Apple () menu > System Preferences. Click iCloud, then click Account Details. Check that the phone number listed under Verification number is correct. If not, enter another phone number.

Re: Qosmio X300 - "Wrong serial number" if I install hardware setup

Hi!
My computer is Qosmio X300-11W. I've jist installed a new Windows Vista Ultimate 32-bit.
I installed all drivers from the list wich I recieved from Toshiba's technical support. But the problem came up when I tried to install "Hardware Setup", I've got a message "Wrong serial number". I can't understand which serial number is wrong.

Hi
As far as I know this error message appears if your mainboard was exchanged from an authorized service provider and they did forget to set the correct serial number.
So I think you should contact the nearest authorized service provider. The technicians can try to help you.
Here you can search for an ASP:
http://eu.computers.toshiba-europe.com => Support & Downloads => Find an authorized service provider

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage - I´d like to add an EMail account on top to my mobile number. My password will not be accepted!!!???

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage -
I´d like to add an EMail account on top to my mobile number to use more this services. My password will not be accepted!!!??? I try it and i try it and i try ist, throughout the same problem. Whats on? The user help desk said, i´ve to reset and use the WLAN key new as well as possible - no way!

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

Use of Mobile Number for Duplication check in CRM 7.0

Dear All,
We are using SAP CRM 7.0 (Marketing). While creating a Business Partner, currenlty we are able get a Warning message based on Address check via TREX 7.0. But we need to check for duplicate based on "Mobile / Phone Number".
Request you to share the approach for achieving this.
Thanks.
Raj

Hi,
As Den said you need to write your own code.
Please see the badi ADDRESS_SEARCH. This badi controls the duplicates search procedure .
You have to implement this badi in your own way to find out the duplicate checks.
Mobile number can not be brought in via BAS index fields.
So the importing parameters in this badi will bring in other address attributes but not mobile number.
So you have to find a provision to bring the mobile number of the bp inside the badi so that you can check on database with that value.
please see the thread [How BUPA_ADDR_CHECK triggered;. A way of bringing mobile number in, is mentioned in this thread.
Thanks,
Rajini

Re-installation of Acrobat fails for allegedly wrong serial number

Hi.
I have problems re-installing Acrobat 8 (CS3) on Windows 7 64bit, the program claims a wrong serial number. By mistake of course, since I use the original DVD. The history seems to be important.
History: I installed CS3 years ago, including Acrobat 8, and it ran smoothly all the time. Spring this years, I migrated to Windows 7, still everything was fine.
Last week I installed a trial version of FrameMaker 12; Creative Cloud was installed also, though I didn't want to. Some days later I missed the Acrobat icon, looked for the folder "Acrobat 8.0" and found it quite empty. And found a new folder "Acrobat 11.0" including acrodist.exe but no Acrobat 11.
To get it running again, I re-installed Acrobat 8 from the CS3 DVD. Worked o.k., but entering the serial number (and pressing "Activate") leads to a message "Invalid Serial Number". What? How can this be?
Well, o.k. Acrobat 8 is not up-to-date, but I want to use my stuff. Anyone knows what I can do?
Thanks,
Guido

After all, I got it fixed:
I uninstalled Acrobat and re-installed it (both via CS installer). I thought, that should have been the same as repairing, but obviously, it isn't as easy.

Mobile number and telephone numbers not displying in lync contacts for other SIP domains.

Hi everyone,
we recently migrated Lync 2010 to 2013, we have 2 SIP boc.bh and scys.gov.bh and local domain boc.local.
lync users for boc.bh not getting telephone numbers & mobile number on lync contact list, same happening for scys.gov.bh lync users they are not able to see any boc.bh lync user telephone number and mobile number on lync list.
but old with lync 2010 all users able to see all numbers in lync list.
recently we changed user UPN suffix for BOC.bh and scys.gov.bh to respective users.
there is no any error massage on lync servers.
manish yadav

Hi Manish!
On the Lync Server 2013 environment you can run the Lync PowerShell command: "Update-CsUserDatabase" after 5 minutes run the command: Update-CsAddressBook
Please after that run: "Invoke-CsManagementStoreReplication" wait for Lync replication with command: "Get-CsManagementStoreReplicationStatus" when Status for each server is appearing as True finally apply the following steps to test with
2 accounts:
Log off of the Lync client and delete the profile from:
%userprofile%\appdata\Local\Microsoft\Office\15.0\Lync
then execute the following command in the command prompt to add the registry that forces the Lync client to immediately download the address book:
reg add HKLM\Software\Policies\Microsoft\Office\15.0\Lync /v GalDownloadInitialDelay /t REG_DWORD /d 0 /f
Sign-in to users again to lync client and test between each other.
PLEASE REMEMBER, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answered"

How do i change the mobile number for my mac facetime

how can i change the mobile number i use on my facetime acc for my imac

Welcome to the Apple Support Communities
To change the phone number or mail address that you use on FaceTime for Mac, open FaceTime, go to FaceTime menu > Preferences, and mark the phone numbers or mail addresses you want to use.
If you want to change phone numbers, you have to do it on the iPhone

TS2755 I recently upgraded my IPhone and for 1 person I began receiving this "7233375 Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code". I receive text from this person but cannot send. Please help. Thank you.

I recently upgraded my IPhone and for 1 person I began receiving this "7233375 Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code". I receive text from this person but cannot send. Please help. Thank you.

Hi there
I’d be happy to help with this messaging error! This will be due to the device storing the number incorrectly. Please do the following to resolve the issue:
Delete texts from both old number and new
Delete any call logs including these numbers
Delete old number from contacts
Delete new number from contacts
Restart device
Send text to the new number directly (do not save as contact)
Once the text sends successfully, you can then save as a new contact
I hope this helps!
Charise

Wrong mobile number sent for keychain setup on iPhone

Similar Messages

Maybe you are looking for