Wrong name in acceptance

When sending aceptances from ical, the email goes out with a name from my contact list.  It was sending "null" now it takes my daughter's name and inserts it in the xxxxxx has accepted the invitation text.  Any idea how to fix this?

Hi,
This information is taken from the contact details on the card set as "My Card" in your contacts. Open the Contacts application and from the Card menu select "Go to My Card". Change the infromation there and then quit both Contacts and the Calendar application.
I hope this helps.
Best wishes
John M

Similar Messages

  • Icalender responce with wrong name

    My calender sens a mail with wrong name when accepts meeting requests. How can I change that name?
    Thanks in advance!

    ssstesoe,
    Quit iCal/Calendar, then click on your card in Address Book/Contacts, then select Contacts>Card>Make This My Card.
    If that is not successful, delete, and recreate your card. Then once again make sure to designate it "Make This My Card."

  • Eclipse Relational Mapping + wrong name exception

    Dears,
    I wanna ask three questions:
    - I understand that TopLink will be replaced by EclipseLink. EclipseLink will have JPA + Relational Mapping? or the Relational Mapping is there only for backward compatiblity and all new products should use EclipseLink JPA?
    - Is there any EclipseLink discussion forum?
    - I am using EclipseLink + EJB 3.0, I am getting the following Exception:
    [EL Finest]: 2009.03.08 14:07:18.453--ServerSession(27076478)--Thread(Thread[OC4J Launcher,5,main])--java.lang.ArrayIndexOutOfBoundsException: 27233
         at org.eclipse.persistence.internal.libraries.asm.ClassReader.readClass(ClassReader.java:943)
         at org.eclipse.persistence.internal.libraries.asm.ClassReader.accept(ClassReader.java:259)
         at org.eclipse.persistence.internal.weaving.PersistenceWeaver.transform(PersistenceWeaver.java:85)
         at com.evermind.server.ejb.persistence.PersistenceUnitInfoImpl$ClassPreprocessorWrapper.processClass(PersistenceUnitInfoImpl.java:392)
         at oracle.classloader.util.ClassPreprocessorSequence.processClass(ClassPreprocessorSequence.java:116)
         at oracle.classloader.PolicyClassLoader.defineClass(PolicyClassLoader.java:2222)
         at oracle.classloader.PolicyClassLoader.findLocalClass(PolicyClassLoader.java:1462)
         at oracle.classloader.SearchPolicy$FindLocal.getClass(SearchPolicy.java:167)
         at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
         at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1674)
         at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1635)
         at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1620)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
         at java.lang.Class.getDeclaredMethods0(Native Method)
         at java.lang.Class.privateGetDeclaredMethods(Class.java:2365)
         at java.lang.Class.getMethod0(Class.java:2611)
         at java.lang.Class.getMethod(Class.java:1579)
         at com.evermind.server.ejb.LifecycleManager.buildLifecycleMethod(LifecycleManager.java:353)
         at com.evermind.server.ejb.LifecycleManager.initialize(LifecycleManager.java:319)
         at com.evermind.server.ejb.deployment.BeanDescriptor.initialize(BeanDescriptor.java:293)
         at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.initialize(ExposableBeanDescriptor.java:173)
         at com.evermind.server.ejb.deployment.SessionBeanDescriptor.initialize(SessionBeanDescriptor.java:225)
         at com.evermind.server.ejb.deployment.EJBPackage.initialize(EJBPackage.java:995)
         at com.evermind.server.ejb.EJBContainer.postInit(EJBContainer.java:852)
         at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:217)
         at com.evermind.server.Application.setConfig(Application.java:438)
         at com.evermind.server.Application.setConfig(Application.java:339)
         at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:1895)
         at com.evermind.server.ApplicationServer.initializeDeployedApplications(ApplicationServer.java:1651)
         at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1034)
         at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
         at java.lang.Thread.run(Thread.java:595)
    09/03/08 14:07:18 WARNING: Application.setConfig Application: current-workspace-app is in failed state as initialization failed.
    oracle.classloader.util.AnnotatedNoClassDefFoundError:
         Missing class: com.its.tabs.ptf.ugm.dal.group.GroupEntity (wrong name: org.eclipse.persistence.internal.libraries.asm.attrs.LocalVariableTypeTableAttribute)
         Dependent class: com.its.tabs.ptf.ugm.dal.group.GroupEntity
         Loader: current-workspace-app.root:0.0.0
         Code-Source: /D:/dev/TopLink11g-JPA/Platform/classes/
         Configuration: <ejb> in unknown
    The missing class is not available from any code-source or loader in the system.
    For sure I am not using any Arrays in my Entity.
    Thanks
    Edited by: Javatizer on Mar 8, 2009 5:11 AM

    Javatizer wrote:
    - I understand that TopLink will be replaced by EclipseLink. EclipseLink will have JPA + Relational Mapping? or the Relational Mapping is there only for backward compatibility and all new products should use EclipseLink JPA?We have transitioned our development to open source with EclipseLink offering JPA as well as continued support for our native relational mappings. The TopLink product continues to exist as Oracle commercial offering including EclipseLink. Those wanting professional support for their use of EclipseLink can get it through licensing of Oracle TopLink. In addition to the inclusion of EclipseLink our TopLink product also includes the original packaging of TopLink for backwards compatibility (including utilities) and TopLink Grid (Coherence integration).
    Customers using TopLink's native relational mappings can upgrade to using EclipseLink's packages (using the package renamer) and continue to leverage the same functionality they are used to. As we add new features we endeavor to make them easily usable through the JPA interface but the native usage is always available.
    Javatizer wrote:
    - Is there any EclipseLink discussion forum?
    There is a newsgroup and mailing lists hosted at eclipse.org - http://www.eclipse.org/eclipselink/community.php
    Javatizer wrote:
    - I am using EclipseLink + EJB 3.0, I am getting the following Exception:
    I would recommend filing a bug for this issue. I'll ask some others to take a look as well to see if they have seen this.
    Doug

  • Error building project using kXML2 - "Class loading error: Wrong name"

    Hi,
    I'm testing the XML-Parser KXML2 and downloaded the latest package, but the minimal version (kxml2-min.zip). I put this file into the directory "%j2mewtk%\apps\KxmlTest\lib" and wrote the lines
    import org.kxml2.io.*;
    import org.xmlpull.v1.*;
    When I try to build the project with the Wireless Toolkit (v1.04) it spits out the following error:
    Error preverifying class kxml2.io.KXmlParser
    Class loading error: Wrong name
    com.sun.kvem.ktools.ExecutionException: Preverifier returned 1
    Build failed
    I also tried the full package "kxml2.zip" but the same error occurs.
    How can I get rid of this? Thanks in advance!

    Okay, finally worked it out (hopefully). I unpacked the archive to a directory (say "%J2MEWTK%\apps\KxmlTest\tmpclasses") and then preverified them "manually":
    %J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.kxml2.io.KXmlParser
    %J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.xmlpull.v1.XmlPullParser
    %J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.xmlpull.v1.XmlPullParserException
    Then I packed them again to a jar-file:
    %J2SDK%\bin\jar.exe -cvf kxml2-min.jar %J2MEWTK%\apps\KxmlTest\tmpclasses\output\.
    That was all!

  • Jabber Client CallerId displays wrong name

    Hi,
    I have a problem with the wrong name displaying in Jabber calls. This only occurs when John calls from his Jabber Client. There is always the CallerId of Sam showing up.
    Checked AD, Outlook contacts, CUCM & Webex configuration and found no errors.
    Then I generated a problem record in my Jabber for Windows client and found this in PROBLEM_FEEDBACK_Cisco_Jabber_17.49_01-08-2013\Contacts\PersonManager\PersonManagerForensics.txt:
    [1] <PersonResolver: 0D32AD90>
    Original record: <0D36E2B8>
    <Person: 0D36E370>
      <PersonRecord: 0D36E2B8> (Roster:[email protected])
      <PersonRecord: 09349160> Sam Sample (WebEx:[email protected])
      <PersonRecord: 0F10FE60> Doe, John (CallerID:+491234567890:Doe, John)
    In the other records there is only one name associated to one person. How did John number slip in here. And most interesting, how can I get rid of that entry? Where is it originated?
    Same Problem occurs at a customer site with a on premise deployment (CUPS). So it doesn't seem to be Webex related. Tried several Jabber versions from 9.1.3 to 9.2.3. Same behaviour.
    Any suggestions hints?
    Regards
    Andre

    I think I see what is going on, just not entirely sure why and how to prevent it yet.
    Look at the two records below, taken from the "PersonManagerForensics.txt" file generated once you report a problem through the Jabber application.
    That first contact is a personal contact in the users Outlook address book.
    The second contact is an employee.
    When the user calls the second contact in Jabber, the caller ID always shows up as first contact. Same thing happens if the second contact calls the user.
    The caller ID for the first contact is the same last 4 digits as the internal employees DID number. We use 4 digit dialing. Not really sure why the caller ID record for the first contact resolved to those last 4 digits of that one telephone number.
    Jabber issue....or Outlook issue???
    I'll open a TAC case.
    [2]
      Belinda Iberl (OutlookRecordSource:EF000000BC83CE4367E42B42B2EF336756A5DEA964E52100) [439-9380 OR 458-0170, 508-2938, 459-2220]
      (CallerID:2220:) [2220]
    3]
      Ryan Kooi (UDS:rkooi) [5204392220]
      (CallerID:5204392220:) [5204392220]

  • In Mail, the "From" line shows the wrong name associated with the email id. How do I update it?

    In Mail, the "From" line shows the wrong name associated with my email ID. I've looked over preferences and account information but have not found where I can update it.

    There isn't an email address associated with the contact name who appears as the "from" in Mail. It used to be a shared email address and I already had updated the contact to list only the phone number in case that was causing the problem. 

  • The hard drive on my MacBook died and I had it replaced. I can't locate my website files and every time I try to open my idisk it looks for a name and password (even reset my apple id as prompted) I keep being told that it's the wrong name or password?

    The hard drive on my MacBook died and I had it replaced. Now I can't locate my website files and every time I try to open my finder/idisk it looks for a name and password (even reset my apple id as prompted) I keep being told that it's the wrong name or password? Any suggestions out there

    Arty ~ Welcome to the Support Communities. iWeb can't import/open published HTML/media files on your iDisk. iWeb can only open its key Domain file which contains your site data — it's usually located here:
    ...If you don't have a backup of your Domain file (e.g. via Time Machine), paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
    http://iwebfaq.org/site/iWeb_Backup_retrieve.html
    Also this thread may help:
    Hard Drive replacement causes new/unknown user password?

  • Wrong Name Error

    Hi,
    I created a package in eclipse with 3 .java files under it.
    In each of the three java files I have included the "package testpackage;" clause at the top.
    My first 2 files (lets call them one.java and two.java) is referenced in three.java, thus I use the import statement for both one and two in three.java.
    After I compile all 3 successfully in Eclipse, I go to the command line, to the specific directory (testpackage) and run: java one, but I get the message:
    NoClassDefFoundError: 1 (wrong name: testpackage/one)
    What is wrong?

    I found that you need to be in the PACKAGE directory when you execute the "java" command, not the directory containing the .class file(s). For example, if you have the following statement in your java program:
    package buServer;
    Your .class files (BUreceiver.class in my case) will reside in a directory named buServer. You need to be in the directory ABOVE the one that contains your class files (the package directory) and execute the program as shown below:
    java buServer/BUreceiver
    The above assumes that the current directory is in your CLASSPATH or is given by the " -cp ." on the java command line.
    The basic problem, I think, is that CLASSPATH points to directories that are supposed to contain .class files. When you use a package, you have to give the fully quallified name of the class with a root beginning in one of the directories in the CLASSPATH. In my case, the "package" statement says my class should be in a <CLASSPATH>\buServer\ directory. When I was in the buServer directory (containing my .class files) and added it to the CLASSPATH, there was no <CLASSPATH>\buServer\ directory, since the buServer\ directory was inside CLASSPATH. However, when I tried to execute it without qualifying it with the "buServer", it saw the package statement in the class file that was there and gave me the "wrong name" error.
    Another solution would have been to take out the package statement from the program.

  • Wrong name in email address and damaged index in address book

    I have experienced this problem for months now. I have a Mac Pro at the office and MacBook Pro at home. The address book is synced with .mac. At random I will receive emails and the mail program will attach the wrong name with the address ( John doe [email protected] will be displayed as mary smith [email protected] ) this also happens in mail I have sent and copied myself on. The incorrect name is usually one that exist in my address book. The second part of the problem which may be related is the index for both address books will get damaged. Every few days I have to discard the address book index file ( AddressBook-v22.abcddb ) which fixes the index issue for a few days. The computers nor the applications ever crash. I wonder if the .mac syncing could be key to both computers having index issues. Rebuilding the address index does not fix the wrong name issue. Both computers are 10.5.2. I feel there is some deeper corruption issue that rebuilding that one index file does not correct. I have also rebuilt all the mail boxes.

    SOLUTION: my ultimate solution to the address book confusing contact info in ichat, mail, etc. was to go to ~/Library/Application Support/AddressBook/ and delete the AddressBook-v22.abcddb file. back up your contacts first!!! but after you delete and relaunch, Address Book will rebuild using the info from the Metadata folder. worked like a charm.
    d

  • The wrong name of the message sender appears. The phone also does not notify the receiver. This started after we purchased in iPad and attempted sending that phone an iMessage.

    When sending messages to one of our iPhones, the wrong name of the sender appears. The phone also does not notify the receiver. This started after we purchased in iPad and attempted sending that phone an iMessage.

    Hi buddy, I figured out what is wrong with that. I had the very same issue, while sending an sms via iMessage on Mountain Lion. I called the Apple guy at the Apple care support but without any luck.
    At the end--at least in my case, but it could also be yours--I think I have understood what was going on. This happens when you have your Apple ID registered on more than one device. In my case, we have two iPhones--one for me and one for my wife--but with the same App Store account. So, when I sent an sms via iMessage for the Mac, the receiver was shown my wife's iPhone number.
    I hope I have been clear enough, you know, explaining this in a foreing language is always painful...
    Ciao,
    Antonio
    P.S.: this could be true for similar issues (iMessage wrong sender) that I've read in the Mountain Lion, iPad and iPod forums.

  • Issue with certain email being received with wrong name

    Hi- From time to time I've seen this happen where an email will come in and the 'from' name is different from the email address. Usually I find the problem with this is in the address book as the record with that email had a wrong name, but that's not the case.
    Is it possible there's something odd with the cache in that a wrong name became associated with an email address? I checked with the email host and the sending email's account is setup correctly, so the issue is somewhere with the recipient.
    Any idea what's going on?

    Hi- From time to time I've seen this happen where an email will come in and the 'from' name is different from the email address. Usually I find the problem with this is in the address book as the record with that email had a wrong name, but that's not the case.
    Is it possible there's something odd with the cache in that a wrong name became associated with an email address? I checked with the email host and the sending email's account is setup correctly, so the issue is somewhere with the recipient.
    Any idea what's going on?

  • SQL Injection Produces "Wrong Name" Errors

    Hi all,
    By now, you're familiar with the SQL Injection attacks
    floatin' around out there, but what has me puzzled is how my
    ColdFusion servers are responding to them. For each SQL Injection
    attempt, CF throws an application error; this is from my
    APPLICATION.LOG:
    "Error","jrpp-953","09/19/08","13:27:04",,"Application (wrong
    name: com/ms/asp/Application) The specific sequence of files
    included or processed is: D:\MySite\web\product.cfm "
    I've seen others complaining about this on ColdFusion MX 6,
    ColdFusion MX 7 and ColdFusion 8, but every discussion terminates
    mysteriously without a solution. It's an evil conspiracy....
    Any help is greatly appreciated.

    Hello,
    Were you able to solve this problem and how?
    Thanks

  • Capture window always uses the wrong name-

    Hello everyone, I'm having this problem… when I go to capture HDV footage the Capture Window always remembers the name of the LAST clip I captured, when I change it and do all my capturing I find out that all my clips (and with HDV that can be a lot) have still retained the wrong name (in the browser and on my scratch disk). I tried trashing preferences and it works for the first time and goes back to this. Any help would be much appreciated. Thanks!
    Also I am using someone else's computer which is a G4 (not my macbook listed below).

    xorg.conf:
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 304.64 (buildmeister@swio-display-x86-rhel47-12) Tue Oct 30 12:04:46 PDT 2012
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    DisplaySize 360 203
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    # Option "UseEdidDpi" "FALSE"
    # Option "DPI" "96 x 96"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    Option "NoLogo" "1"
    Option "TripleBuffer" "1"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1360x768_60.00"
    EndSubSection
    EndSection

  • CD showing up as wrong name

    I'm importing a CD into iTunes and it shows up under the wrong name and with all wrong info. Even if I delete it, when I try again it shows up as the same wrong name. How can I change it?

    This is likely due to an error in the Gracenote database that iTunes links to for retrieving album info. You'll have to manually edit the tags to correct them -- either before you import or after. If you correct them before you import, the nice thing is that iTunes will remember this if you ever have to re-import this album, and if you edit the tags before you import you have the ability to submit the corrections back to Gracenote (Advanced/Submit CD Track Names).

  • Error - Caused By: java.lang.NoClassDefFoundError: t : T (wrong name t)

    I am getting below error when the weblogic server starts. Can somebody help on this.
    DS (XreferenceDB) creation was successful but could not test (Not available in Testing tab).
    ####<Jul 3, 2012 7:18:14 PM IST> <Error> <Deployer> <PC165237> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1341323294981> <BEA-149231> <Unable to set the activation state to true for the application 'XreferenceDB'.
    java.lang.NoClassDefFoundError: t : T (wrong name t)
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
         at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
         at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
         at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
         at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:296)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:296)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:177)
         at weblogic.utils.classloaders.FilteringClassLoader.findClass(FilteringClassLoader.java:101)
         at weblogic.utils.classloaders.FilteringClassLoader.loadClass(FilteringClassLoader.java:86)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:296)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:177)
         at weblogic.rmi.internal.GenericMethodDescriptor.getActualClassName(GenericMethodDescriptor.java:216)
         at weblogic.rmi.internal.GenericMethodDescriptor.access$100(GenericMethodDescriptor.java:19)
         at weblogic.rmi.internal.GenericMethodDescriptor$TypeParameter.<init>(GenericMethodDescriptor.java:250)
         at weblogic.rmi.internal.GenericMethodDescriptor.parseParams(GenericMethodDescriptor.java:111)
         at weblogic.rmi.internal.GenericMethodDescriptor.parseGenericParameter(GenericMethodDescriptor.java:151)
         at weblogic.rmi.internal.GenericMethodDescriptor.parseParams(GenericMethodDescriptor.java:109)
         at weblogic.rmi.internal.GenericMethodDescriptor.computeGenericMethodSignature(GenericMethodDescriptor.java:75)
         at weblogic.rmi.internal.GenericMethodDescriptor.computeGenericMethodSignature(GenericMethodDescriptor.java:46)
         at weblogic.rmi.internal.BasicRuntimeDescriptor.initRemoteMethods(BasicRuntimeDescriptor.java:715)
         at weblogic.rmi.internal.BasicRuntimeDescriptor.initializeRuntimeDescriptor(BasicRuntimeDescriptor.java:244)
         at weblogic.rmi.internal.BasicRuntimeDescriptor.<init>(BasicRuntimeDescriptor.java:155)
         at weblogic.rmi.internal.BasicRuntimeDescriptor.<init>(BasicRuntimeDescriptor.java:139)
         at weblogic.rmi.internal.DescriptorManager.createRuntimeDescriptor(DescriptorManager.java:106)
         at weblogic.rmi.internal.DescriptorManager.getBasicRuntimeDescriptor(DescriptorManager.java:85)
         at weblogic.rmi.internal.DescriptorManager.getDescriptor(DescriptorManager.java:51)
         at weblogic.rmi.internal.DescriptorManager.getDescriptor(DescriptorManager.java:37)
         at weblogic.rmi.internal.OIDManager.makeServerReference(OIDManager.java:194)
         at weblogic.rmi.internal.OIDManager.getReplacement(OIDManager.java:175)
         at weblogic.rmi.utils.io.RemoteObjectReplacer.replaceRemote(RemoteObjectReplacer.java:120)
         at weblogic.rmi.utils.io.RemoteObjectReplacer.replaceObject(RemoteObjectReplacer.java:103)
         at weblogic.rmi.extensions.server.ServerHelper.replaceAndResolveRemoteObject(ServerHelper.java:403)
         at weblogic.jndi.internal.WLEventContextImpl.copyObject(WLEventContextImpl.java:381)
         at weblogic.jndi.internal.WLEventContextImpl.bind(WLEventContextImpl.java:276)
         at javax.naming.InitialContext.bind(InitialContext.java:400)
         at weblogic.jdbc.common.internal.JDBCUtil.bindDeeply(JDBCUtil.java:147)
         at weblogic.jdbc.common.internal.JDBCUtil.bindAll(JDBCUtil.java:85)
         at weblogic.jdbc.common.internal.RmiDataSource.start(RmiDataSource.java:394)
         at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:136)
         at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:97)
         at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:347)
         at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:531)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:165)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:157)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
         at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:42)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    ###<Jul 3, 2012 7:18:15 PM IST> <Info> <Common> <PC165237> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1341323295059> <BEA-000626> <Free resources in pool "mds-owsm" will be tested every "300" seconds.>
    ####<Jul 3, 2012 7:18:15 PM IST> <Info> <JDBC> <PC165237> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1341323295075> <BEA-001124> <Created Connection Pool named mds-owsm.>
    ####<Jul 3, 2012 7:18:15 PM IST> <Info> <JDBC> <PC165237> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1341323295122> <BEA-001174> <Creating Data Source named mds-owsm, JNDI Name = jdbc/mds/owsm.>
    ####<Jul 3, 2012 7:18:15 PM IST> <Error> <Deployer> <PC165237> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1341323295122> <BEA-149231> <Unable to set the activation state to true for the application 'mds-owsm'.
    java.lang.NoClassDefFoundError: t : T (wrong name t)
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
         at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
         at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
         at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
         at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:296)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:296)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:177)
         at weblogic.utils.classloaders.FilteringClassLoader.findClass(FilteringClassLoader.java:101)
         at weblogic.utils.classloaders.FilteringClassLoader.loadClass(FilteringClassLoader.java:86)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:296)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:177)
         at weblogic.rmi.internal.GenericMethodDescriptor.getActualClassName(GenericMethodDescriptor.java:216)
         at weblogic.rmi.internal.GenericMethodDescriptor.access$100(GenericMethodDescriptor.java:19)
         at weblogic.rmi.internal.GenericMethodDescriptor$TypeParameter.<init>(GenericMethodDescriptor.java:250)
         at weblogic.rmi.internal.GenericMethodDescriptor.parseParams(GenericMethodDescriptor.java:111)
         at weblogic.rmi.internal.GenericMethodDescriptor.parseGenericParameter(GenericMethodDescriptor.java:151)
         at weblogic.rmi.internal.GenericMethodDescriptor.parseParams(GenericMethodDescriptor.java:109)
         at weblogic.rmi.internal.GenericMethodDescriptor.computeGenericMethodSignature(GenericMethodDescriptor.java:75)
         at weblogic.rmi.internal.GenericMethodDescriptor.computeGenericMethodSignature(GenericMethodDescriptor.java:46)
         at weblogic.rmi.internal.BasicRuntimeDescriptor.initRemoteMethods(BasicRuntimeDescriptor.java:715)
         at weblogic.rmi.internal.BasicRuntimeDescriptor.initializeRuntimeDescriptor(BasicRuntimeDescriptor.java:244)
         at weblogic.rmi.internal.BasicRuntimeDescriptor.<init>(BasicRuntimeDescriptor.java:155)
         at weblogic.rmi.internal.BasicRuntimeDescriptor.<init>(BasicRuntimeDescriptor.java:139)
         at weblogic.rmi.internal.DescriptorManager.createRuntimeDescriptor(DescriptorManager.java:106)
         at weblogic.rmi.internal.DescriptorManager.getBasicRuntimeDescriptor(DescriptorManager.java:85)
         at weblogic.rmi.internal.DescriptorManager.getDescriptor(DescriptorManager.java:51)
         at weblogic.rmi.internal.DescriptorManager.getDescriptor(DescriptorManager.java:37)
         at weblogic.rmi.internal.OIDManager.makeServerReference(OIDManager.java:194)
         at weblogic.rmi.internal.OIDManager.getReplacement(OIDManager.java:175)
         at weblogic.rmi.utils.io.RemoteObjectReplacer.replaceRemote(RemoteObjectReplacer.java:120)
         at weblogic.rmi.utils.io.RemoteObjectReplacer.replaceObject(RemoteObjectReplacer.java:103)
         at weblogic.rmi.extensions.server.ServerHelper.replaceAndResolveRemoteObject(ServerHelper.java:403)
         at weblogic.jndi.internal.WLEventContextImpl.copyObject(WLEventContextImpl.java:381)
         at weblogic.jndi.internal.WLEventContextImpl.bind(WLEventContextImpl.java:276)
         at weblogic.jdbc.common.internal.JDBCUtil.bindDeeply(JDBCUtil.java:147)
         at weblogic.jdbc.common.internal.JDBCUtil.bindAll(JDBCUtil.java:85)
         at weblogic.jdbc.common.internal.RmiDataSource.start(RmiDataSource.java:394)
         at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:136)
         at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:97)
         at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:347)
         at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:531)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:165)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:157)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
         at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:42)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Edited by: 944382 on Jul 4, 2012 2:34 AM

    Error while creating and saving the DS...
    ####<Jul 3, 2012 7:18:13 PM IST> <Info> <JDBC> <PC165237> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1341323293059> <BEA-001517> <Connection Pool "XreferenceDB" using Driver: "Oracle JDBC driver", Version: "11.1.0.7.0-Production".>
    ####<Jul 3, 2012 7:18:14 PM IST> <Info> <Common> <PC165237> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1341323294856> <BEA-000628> <Created "1" resources for pool "XreferenceDB", out of which "1" are available and "0" are unavailable.>
    ####<Jul 3, 2012 7:18:14 PM IST> <Info> <JDBC> <PC165237> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1341323294856> <BEA-001124> <Created Connection Pool named XreferenceDB.>
    ####<Jul 3, 2012 7:18:14 PM IST> <Info> <JDBC> <PC165237> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1341323294903> <BEA-001174> <Creating Data Source named XreferenceDB, JNDI Name = Xreference.>
    ####<Jul 3, 2012 7:18:14 PM IST> <Error> <Deployer> <PC165237> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1341323294981> <BEA-149231> <Unable to set the activation state to true for the application 'XreferenceDB'.
    java.lang.NoClassDefFoundError: t : T (wrong name t)
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
         at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
         at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
         at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
         at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:296)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:296)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:177)
         at weblogic.utils.classloaders.FilteringClassLoader.findClass(FilteringClassLoader.java:101)
         at weblogic.utils.classloaders.FilteringClassLoader.loadClass(FilteringClassLoader.java:86)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:296)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:177)
         at weblogic.rmi.internal.GenericMethodDescriptor.getActualClassName(GenericMethodDescriptor.java:216)
         at weblogic.rmi.internal.GenericMethodDescriptor.access$100(GenericMethodDescriptor.java:19)
         at weblogic.rmi.internal.GenericMethodDescriptor$TypeParameter.<init>(GenericMethodDescriptor.java:250)
         at weblogic.rmi.internal.GenericMethodDescriptor.parseParams(GenericMethodDescriptor.java:111)
         at weblogic.rmi.internal.GenericMethodDescriptor.parseGenericParameter(GenericMethodDescriptor.java:151)
         at weblogic.rmi.internal.GenericMethodDescriptor.parseParams(GenericMethodDescriptor.java:109)
         at weblogic.rmi.internal.GenericMethodDescriptor.computeGenericMethodSignature(GenericMethodDescriptor.java:75)
         at weblogic.rmi.internal.GenericMethodDescriptor.computeGenericMethodSignature(GenericMethodDescriptor.java:46)
         at weblogic.rmi.internal.BasicRuntimeDescriptor.initRemoteMethods(BasicRuntimeDescriptor.java:715)
         at weblogic.rmi.internal.BasicRuntimeDescriptor.initializeRuntimeDescriptor(BasicRuntimeDescriptor.java:244)
         at weblogic.rmi.internal.BasicRuntimeDescriptor.<init>(BasicRuntimeDescriptor.java:155)
         at weblogic.rmi.internal.BasicRuntimeDescriptor.<init>(BasicRuntimeDescriptor.java:139)
         at weblogic.rmi.internal.DescriptorManager.createRuntimeDescriptor(DescriptorManager.java:106)
         at weblogic.rmi.internal.DescriptorManager.getBasicRuntimeDescriptor(DescriptorManager.java:85)
         at weblogic.rmi.internal.DescriptorManager.getDescriptor(DescriptorManager.java:51)
         at weblogic.rmi.internal.DescriptorManager.getDescriptor(DescriptorManager.java:37)
         at weblogic.rmi.internal.OIDManager.makeServerReference(OIDManager.java:194)
         at weblogic.rmi.internal.OIDManager.getReplacement(OIDManager.java:175)
         at weblogic.rmi.utils.io.RemoteObjectReplacer.replaceRemote(RemoteObjectReplacer.java:120)
         at weblogic.rmi.utils.io.RemoteObjectReplacer.replaceObject(RemoteObjectReplacer.java:103)
         at weblogic.rmi.extensions.server.ServerHelper.replaceAndResolveRemoteObject(ServerHelper.java:403)
         at weblogic.jndi.internal.WLEventContextImpl.copyObject(WLEventContextImpl.java:381)
         at weblogic.jndi.internal.WLEventContextImpl.bind(WLEventContextImpl.java:276)
         at javax.naming.InitialContext.bind(InitialContext.java:400)
         at weblogic.jdbc.common.internal.JDBCUtil.bindDeeply(JDBCUtil.java:147)
         at weblogic.jdbc.common.internal.JDBCUtil.bindAll(JDBCUtil.java:85)
         at weblogic.jdbc.common.internal.RmiDataSource.start(RmiDataSource.java:394)
         at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:136)
         at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:97)
         at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:347)
         at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:531)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:165)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:157)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
         at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:42)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Edited by: 944382 on Jul 5, 2012 4:28 AM

Maybe you are looking for