Wrong number of members in a TG. Infoset query vs Segment Builder.

Hi gurus,
I've discovered an issue in our CRM System (BBPCRM 600) and I have no idea of how to solve.
For our marketing segmentation, we've created a Infoset (SQ02) with a link between standard (BUT000, CRMD_ORDERADM_H, CRMD_OPPORT_H) and custom tables. Over this infoset, I've created an infoset query (SQ01).
During our test, we've noticed the following: Using the same filters in segment builder and in infoset query, results are not the same!! Segment builder adds more partners to our TG's and even these partner doesn´t met the filters!
For Example:
Using POSTING DATE from CRMD_ORDERADM_H as filter: From 01/01/2014 to 01/312014.
Using infoset query, all partners I'm getting are correct, all of them have CRM operations for this date interval.
However, using this same filter in segment builder, the resulting list of partners has one more than query list...and this partner doesn´t have any operation for the chosen internval.
How is this possible? Why results are not the same? Any ideas? Is there any BADI for segment builder that must be checked?
A lot of thanks!!
Message was edited by: SAP _ES

Solved!!
I was wrongly using AND/OR options to add filters in the segmentation tool...ups!

Similar Messages

Infoset Query Wrong result after removing document number in the drilldown

Hi Friends,
I have 2 oDS,billing ODS and Condition ODS.I have created an infoset query based on these two ODS.
From my Billing ODS i need QTY and from Condition ODS i need Value,Discount etc.
Since there are more than one record in condition ods for each and every document of billin gods,i have divided the qty using number of records in the query.
Im getting wrong qty if i run report based on customer or material,but if i drilldown based on document im getting the correct quanity.
Can any one help me..
Thanks & Regards
Sudhakar

Thnaks Oscar and Ganesh for your interest.
FYI,my infoset is created based on bill doc and item number which is available in both the ODS.
Here,for every document in Billing ODS,there are more number of documnets in Condition ODS,so the bill qty is getting added according to the numvber of records in Condition ODS.
Eg.Billing ODS: Doc Num:100012, Qty = 8.if 10 records are ther in condition ODS,then in the infoset my QTY becomes,
Doc Num:100012, Qty = 80.
So in the query i divided it by number of records to get the qty and is coming correctly for documnet wise report.
Problem comes when i remove documnet from the report and drilldown to higher level,say material,then it is calculated wrongly.
Your suggestions plz..
Regards
Sudhakar

Wrong number or types of parameters after upgrading to ODP 11.2.0.1.1 Beta

Hi,
I have the below Oracle procedure with two parameters , the first one i IS TABLE OF number INDEX BY BINARY_INTEGER, and the second one is of type Ref cursor of predifned RECORD type.
PROCEDURE Proc1(p_proj_comp_no_list IN core_util.ref_t,
p_proj_comp_post_query_cursor OUT t_proj_comp_post_query_cursor
) IS
This has been working fine while we were using DEVART Oracle drivers. however, as soon we move to ODP 11.2.0.1.1 Beta version we get the below error while executing the procedure via ODP.
{"ORA-06550: line 1, column 7:\nPLS-00306: wrong number or types of arguments in call to 'PROJ_COMP_POST_QUERY'\nORA-06550: line 1, column 7:\nPL/SQL: Statement ignored"}
Below is the debug watch result of the two parameters of the COMMAND being executed.
Best Regards,
Prabhakar
+          *base     {P_PROJ_COMP_NO_LIST}     System.Data.Common.DbParameter {Oracle.DataAccess.Client.OracleParameter}*
          ArrayBindSize     null     int[]
          ArrayBindStatus     null     Oracle.DataAccess.Client.OracleParameterStatus[]
          CollectionType     None     Oracle.DataAccess.Client.OracleCollectionType
          DbType     String     System.Data.DbType
          Direction     Input     System.Data.ParameterDirection
          IsNullable     false     bool
          Offset     0     int
          OracleDbType     Long     Oracle.DataAccess.Client.OracleDbType
          OracleDbTypeEx     Long     Oracle.DataAccess.Client.OracleDbType
          ParameterName     "P_PROJ_COMP_NO_LIST"     string
          Precision     0     byte
          Scale     0     byte
          Size     1     int
          SourceColumn     ""     string
          SourceColumnNullMapping     false     bool
          SourceVersion     Current     System.Data.DataRowVersion
          Status     Success     Oracle.DataAccess.Client.OracleParameterStatus
          UdtTypeName     ""     string
+          Value     {long[1]}     object {long[]}
+          Static members
+          Non-Public members
-          [1]     {P_PROJ_COMP_POST_QUERY_CURSOR}     object {Oracle.DataAccess.Client.OracleParameter}
+          *base     {P_PROJ_COMP_POST_QUERY_CURSOR}     System.Data.Common.DbParameter {Oracle.DataAccess.Client.OracleParameter}*
          ArrayBindSize     null     int[]
          ArrayBindStatus     null     Oracle.DataAccess.Client.OracleParameterStatus[]
          CollectionType     None     Oracle.DataAccess.Client.OracleCollectionType
          DbType     Object     System.Data.DbType
          Direction     Output     System.Data.ParameterDirection
          IsNullable     false     bool
          Offset     0     int
          OracleDbType     RefCursor     Oracle.DataAccess.Client.OracleDbType
          OracleDbTypeEx     RefCursor     Oracle.DataAccess.Client.OracleDbType
          ParameterName     "P_PROJ_COMP_POST_QUERY_CURSOR"     string
          Precision     0     byte
          Scale     0     byte
          Size     0     int
          SourceColumn     ""     string
          SourceColumnNullMapping     false     bool
          SourceVersion     Current     System.Data.DataRowVersion
          Status     Success     Oracle.DataAccess.Client.OracleParameterStatus
          UdtTypeName     ""     string
+          Value     {}     object {System.DBNull}
+          Static members
+          Non-Public members

Hi,
Can you please show the actual code that creates and appends the parameters instead, along with cmd.commandtext?
Thanks
Greg
Edited by: gdarling on Jun 30, 2010 11:54 AM
Also note that unless you're using Oracle Developer Tools for VS to generate the code, this would probably be more appropriate in the ODP forum:
ODP.NET

PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMI

I am trying to submit the payables open interface import program using BPEL process. BUT I am unable to submit the concurrent program. The invoke function is failing with below message.
[2010/08/25 17:06:22] Faulted while invoking operation "OFAPOPIIMPORT" on provider "OFAPOPIIMPORT".less
-<messages>
-<input>
-<Invoke_1_OFAPOPIIMPORT_InputVariable>
-<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="InputParameters">
-<InputParameters xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/XX_BPEL_FND_REQUEST_SUBMIT_REQ/FND_REQUEST-24SUBMIT_REQUEST/" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/XX_BPEL_FND_REQUEST_SUBMIT_REQ/FND_REQUEST-24SUBMIT_REQUEST/">
<db:APPLICATION>200</db:APPLICATION>
<db:PROGRAM>APXIIMPT</db:PROGRAM>
<db:DESCRIPTION>Test</db:DESCRIPTION>
<db:START_TIME/><db:SUB_REQUEST/>
<db:OperatingUnit>NYSIF</db:OperatingUnit>
<db:Source>DBL</db:Source>
<db:Group/>
<db:BatchName>TESTRAMBPEL1</db:BatchName>
<db:HoldName/>
<db:HoldReason/>
<db:GLDate/>
<db:Purge>N</db:Purge>
<db:TraceSwitch>N</db:TraceSwitch>
<db:DebugSwitch>N</db:DebugSwitch>
<db:SummarizeReport>N</db:SummarizeReport>
<db:CommitBatchSize>1000</db:CommitBatchSize>
<db:UserID>4842</db:UserID>
<db:LoginID>1683090</db:LoginID>
</InputParameters>
</part>
</Invoke_1_OFAPOPIIMPORT_InputVariable>
</input>
-<fault>
-<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="code">
<code>6550
</code>
</part>
-<part name="summary">
<summary>
file:/C:/product/10.1.3.1/OraBPEL_1/bpel/domains/default/tmp/.bpel_APOPIIMPORT_1.0_91d4c6c1050ed25d005bc0d396a9db24.tmp/OFAPOPIIMPORT.wsdl [ OFAPOPIIMPORT_ptt::OFAPOPIIMPORT(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'OFAPOPIIMPORT' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.XX_BPEL_FND_REQUEST_SUBMIT_REQ.FND_REQUEST$SUBMIT_REQUEST API. Cause: java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
[Caused by: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
; nested exception is:
ORABPEL-11811
Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.XX_BPEL_FND_REQUEST_SUBMIT_REQ.FND_REQUEST$SUBMIT_REQUEST API. Cause: java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
[Caused by: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable.
</summary>
</part>
-<part name="detail">
<detail>
Internal Exception: java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Error Code: 6550
</detail>
</part>
</remoteFault>
</fault>
</messages>
[2010/08/25 17:06:22] "{http://schemas.oracle.com/bpel/extension}remoteFault" has been thrown. More...
-<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="code">
<code>6550
</code>
</part>
-<part name="summary">
<summary>
file:/C:/product/10.1.3.1/OraBPEL_1/bpel/domains/default/tmp/.bpel_APOPIIMPORT_1.0_91d4c6c1050ed25d005bc0d396a9db24.tmp/OFAPOPIIMPORT.wsdl [ OFAPOPIIMPORT_ptt::OFAPOPIIMPORT(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'OFAPOPIIMPORT' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.XX_BPEL_FND_REQUEST_SUBMIT_REQ.FND_REQUEST$SUBMIT_REQUEST API. Cause: java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
[Caused by: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
; nested exception is:
ORABPEL-11811
Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.XX_BPEL_FND_REQUEST_SUBMIT_REQ.FND_REQUEST$SUBMIT_REQUEST API. Cause: java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
[Caused by: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable.
</summary>
</part>
-<part name="detail">
<detail>
Internal Exception: java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Error Code: 6550
</detail>
</part>
</remoteFault>
I thought I am providing the values for the required parameters. But still I am unable to submit. Could some one help me on fixing this issue?
Thanks,

That's probably your problem.
Look at http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28351/T430238T430241.htm
Search for "One-time Workaround for Concurrent Programs" in that document.

SSRS Calling a Stored Procedure error : PLS-00306: wrong number or types of arg...

Hi,
My Problem is when im adding dataset with stored procedure, im getting this error.
I Can access database,
Could not create a list of fields for the query. Verify that you can connect to the data source and that your query syntax is correct.
ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'PROCEDURE_NAME' ORA-06550: line 1, column 7: PL/SQL:
Statement ignored
stored procedure is simple select :
CREATE OR REPLACE PROCEDURE [PROCEDURE_NAME](L_CURSOR out SYS_REFCURSOR)
is
Begin
open L_CURSOR for
SELECT [columnname] FROM
[tablename]
End;
Configuration Details:
DB: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64biOracle Developer Tools for Visual Studio Copyright (c) 2005,2014 SQL Server Data Tools Type: Oracle , Data Provider : .Net Framework Data Provider For Oracle

The answer is of inside question. It is about provider. Change my provider ODTwithODAC for 10g (my database version). And problem resolved.
Thank you for your helps,
Regards,
Arda

Error: Wrong number of arguments in method

Hi all,
          I keep getting the above mentioned error when compiling simple JSPs with
          only a few lines of codes. Here are the log dump.
          Mon Aug 07 20:02:30 GMT+08:00 2000:<I> <ServletContext-General> file: init
          Mon Aug 07 20:02:30 GMT+08:00 2000:<E> <ServletContext-General> Cannot find
          resource 'language.html' in document root 'C:\weblogic\myserver\public_html'
          Mon Aug 07 20:02:30 GMT+08:00 2000:<E> <ServletContext-General> Cannot find
          resource 'top.html' in document root 'C:\weblogic\myserver\public_html'
          Mon Aug 07 20:02:30 GMT+08:00 2000:<E> <ServletContext-General> Cannot find
          resource 'language.html' in document root 'C:\weblogic\myserver\public_html'
          Mon Aug 07 20:02:54 GMT+08:00 2000:<I> <ServletContext-General> *.jsp: init
          Mon Aug 07 20:02:54 GMT+08:00 2000:<I> <ServletContext-General> *.jsp: param
          verbose initialized to: true
          Mon Aug 07 20:02:54 GMT+08:00 2000:<I> <ServletContext-General> *.jsp: param
          packagePrefix initialized to: jsp
          Mon Aug 07 20:02:54 GMT+08:00 2000:<I> <ServletContext-General> *.jsp: param
          compileCommand initialized to: C:/jdk1.2.2/bin/javac.exe
          Mon Aug 07 20:02:54 GMT+08:00 2000:<I> <ServletContext-General> *.jsp: param
          srcCompiler initialized to weblogic.jspc
          Mon Aug 07 20:02:54 GMT+08:00 2000:<I> <ServletContext-General> *.jsp: param
          superclass initialized to null
          Mon Aug 07 20:02:54 GMT+08:00 2000:<I> <ServletContext-General> *.jsp: param
          workingDir initialized to: C:\weblogic\myserver\classfiles
          Mon Aug 07 20:02:55 GMT+08:00 2000:<I> <ServletContext-General> *.jsp: param
          pageCheckSeconds initialized to: 1
          Mon Aug 07 20:02:55 GMT+08:00 2000:<I> <ServletContext-General> *.jsp:
          initialization complete
          Mon Aug 07 20:02:55 GMT+08:00 2000:<I> <ServletContext-General> Generated
          java file: C:\weblogic\myserver\classfiles\jsp\helloworld.java
          Mon Aug 07 20:02:59 GMT+08:00 2000:<E> <ServletContext-General> Compilation
          of C:\weblogic\myserver\classfiles\jsp\helloworld.java failed:
          C:\weblogic\myserver\classfiles\jsp\helloworld.java:54: Wrong number of
          arguments in method.
          if (sci.isResourceStale("/helloworld.jsp", 933320916000L, "5.1.0
          Service Pack 4 06/29/2000 18:18:23 #74560")) return true;
          ^
          C:\weblogic\myserver\classfiles\jsp\helloworld.java:55: Wrong number of
          arguments in method.
          if (sci.isResourceStale("/dukebanner.html", 933321078000L, "5.1.0
          Service Pack 4 06/29/2000 18:18:23 #74560")) return true;
          ^
          2 errors
          java.io.IOException: Compiler failed
          executable.exec([Ljava.lang.String;[C:/jdk1.2.2/bin/javac.exe, -classpath,
          c:\weblogic\lib\weblogic510sp4boot.jar;c:\weblogic\myserver\User.jar;c:\webl
          ogic\myserver\Person.jar;c:\weblogic\myserver\TradingAccount.jar;c:\weblogic
          \myserver\uniquesequence.jar;c:\weblogic\myserver\stockbroker.jar;;C:\jdk1.2
          .2\jre\lib\rt.jar;C:\jdk1.2.2\jre\lib\i18n.jar;C:\weblogic\classes\boot;C:\w
          eblogic\eval\cloudscape\lib\cloudscape.jar;c:\weblogic\lib\weblogic510sp4.ja
          r;c:\weblogic\license;c:\weblogic\classes;c:\weblogic\myserver\serverclasses
          ;c:\weblogic\lib\weblogicaux.jar;C:\weblogic\myserver\tmp_deployments\ejbjar
          -10126.jar;C:\weblogic\lib\persistence\WebLogic_RDBMS.jar;C:\weblogic\myserv
          er\tmp_deployments\ejbjar-10125.jar;C:\weblogic\myserver\tmp_deployments\ejb
          jar-10124.jar;C:\weblogic\myserver\tmp_deployments\ejbjar-10123.jar;C:\weblo
          gic\myserver\tmp_deployments\ejbjar-10122.jar;C:\weblogic\myserver\tmp_deplo
          yments\ejbjar-10121.jar;C:\weblogic\myserver\servletclasses;C:\weblogic\myse
          rver\classfiles, -d, C:\weblogic\myserver\classfiles,
          C:\weblogic\myserver\classfiles\jsp\helloworld.java])
          at
          weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.jav
          a, Compiled Code)
          at
          weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:200)
          at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java, Compiled Code)
          at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:173)
          at
          weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:18
          7)
          at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
          :118)
          at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
          :142)
          at
          weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
          l.java:744)
          at
          weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
          l.java:692)
          at
          weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
          Manager.java:251)
          at
          weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:363)
          at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:263)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
          Mon Aug 07 20:02:59 GMT+08:00 2000:<E> <ServletContext-General> Servlet
          failed with Exception
          java.io.IOException: Compiler failed
          executable.exec([Ljava.lang.String;[C:/jdk1.2.2/bin/javac.exe, -classpath,
          c:\weblogic\lib\weblogic510sp4boot.jar;c:\weblogic\myserver\User.jar;c:\webl
          ogic\myserver\Person.jar;c:\weblogic\myserver\TradingAccount.jar;c:\weblogic
          \myserver\uniquesequence.jar;c:\weblogic\myserver\stockbroker.jar;;C:\jdk1.2
          .2\jre\lib\rt.jar;C:\jdk1.2.2\jre\lib\i18n.jar;C:\weblogic\classes\boot;C:\w
          eblogic\eval\cloudscape\lib\cloudscape.jar;c:\weblogic\lib\weblogic510sp4.ja
          r;c:\weblogic\license;c:\weblogic\classes;c:\weblogic\myserver\serverclasses
          ;c:\weblogic\lib\weblogicaux.jar;C:\weblogic\myserver\tmp_deployments\ejbjar
          -10126.jar;C:\weblogic\lib\persistence\WebLogic_RDBMS.jar;C:\weblogic\myserv
          er\tmp_deployments\ejbjar-10125.jar;C:\weblogic\myserver\tmp_deployments\ejb
          jar-10124.jar;C:\weblogic\myserver\tmp_deployments\ejbjar-10123.jar;C:\weblo
          gic\myserver\tmp_deployments\ejbjar-10122.jar;C:\weblogic\myserver\tmp_deplo
          yments\ejbjar-10121.jar;C:\weblogic\myserver\servletclasses;C:\weblogic\myse
          rver\classfiles, -d, C:\weblogic\myserver\classfiles,
          C:\weblogic\myserver\classfiles\jsp\helloworld.java])
          at
          weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.jav
          a, Compiled Code)
          at
          weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:200)
          at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java, Compiled Code)
          at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:173)
          at
          weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:18
          7)
          at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
          :118)
          at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
          :142)
          at
          weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
          l.java:744)
          at
          weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
          l.java:692)
          at
          weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
          Manager.java:251)
          at
          weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:363)
          at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:263)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
          I believe that it has got something to do with the configuration of the
          server and not the code in the JSPs. Have anyone encountered this error
          before? Pls advice thanx!
          Cheers,
          kianhui


double d[] = new double[300];
getMax(d);Pass the array, not an element in the array.

Java Applet in a HTML page: failing with PLS-00306: wrong number of args

We are trying to use a Java Applet in a HTML page. as our system needs to be able to retrieve a predefined set of data from a third party system that uses Dynamic Data Exchange Protocol (DDE) and are encountering errors from APEX and in IE itself.
We are using JavaDde from www.nevaobject.com that enables our Java applet to interact with Windows applications (Third Party System) using DDE.
This functionality is currently used in our Web Form 6i application and we are trying to use the same in the new ApEx application.
We are using ApEx version : 2.1 and actually aer encountering 2 problems:
Problem 1: ApEx failing with PLS-00306: wrong number or types of arguments in call to 'ACCEPT'
Problem 2: IE crashes if Applet used in a complex page with several regions (1 Context, 4 Report Regions, 2 level Tabs, Links)
This problem does not occur in the page where there is only applet and one region. In the case of complex page the IE crashes if the page is reloaded
Test scenario:
1- Create a simple page with the HTML region.
2- Define the Source of the above region as follows
<OBJECT CLASSID="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
CODEBASE="http://java.sun.com/products/plugin/autodl/jinstall-1_4-windows-i586.cab#version=1,4,0,0"
WIDTH="1"
HEIGHT="1"
ID="simpleApplet"
NAME="simpleApplet">
<PARAM NAME="code" VALUE="simpleApplet.class" >
<PARAM NAME="archive" VALUE="simpleApplet.jar" />
<PARAM NAME="type" VALUE="application/x-java-applet;version=1.4">
</OBJECT>
3- Create a simple Java applet "simpleApplet" - for the test its enough if the applet will have just the init method printing out the mesage to the console
4- Create a Submit Button (not redirect) in Region Header and create unconditional (do not set When Button Pressed property) Page Branch to navigate to another page (the page without the applet)
6- Run the page and Submit -
The error below is returned by the engine:
In our case our applet is called ddeApplet - I do not know why is ApEx passing the Applet's ID down to the wwv_flow.accept method as a parameter
Tue, 24 Jul 2007 08:15:39 GMT
ORA-06550: line 7, column 2:
PLS-00306: wrong number or types of arguments in call to 'ACCEPT'
ORA-06550: line 7, column 2:
PL/SQL: Statement ignored
DAD name: rbdev2_ax
PROCEDURE : wwv_flow.accept
URL : http://castor:7778/pls/rbdev2_ax/wwv_flow.accept
PARAMETERS :
============
P_FLOW_ID:
147
P_FLOW_STEP_ID:
500
P_INSTANCE:
6986070096861669560
P_PAGE_SUBMISSION_ID:
1005758
P_REQUEST:
CRASH
P_ARG_NAMES:
100380029717786501
P_T01:
147
P_T02:
101
P_T03:
5000044
P_T04:
1
P_T05:
S
DDEAPPLET:
Ddeapplet[panel0,0,0,1x1,layout=java.awt.BorderLayout,rootPane=javax.swing.JRootPane[,0,0,1x1,layout=javax.swing.JRootPane$RootLayout,alignmentX=null,alignmentY=null,border=,flags=385,maximumSize=,minimumSize=,preferredSize=],rootPaneCheckingEnabled=true]
P_MD5_CHECKSUM:
ENVIRONMENT:
============
PLSQL_GATEWAY=WebDb
GATEWAY_IVERSION=2
SERVER_SOFTWARE=Oracle HTTP Server Powered by Apache/1.3.19 (Unix) mod_fastcgi/2.2.10 mod_perl/1.25 mod_oprocmgr/1.0
GATEWAY_INTERFACE=CGI/1.1
SERVER_PORT=7778
SERVER_NAME=castor
REQUEST_METHOD=POST
QUERY_STRING=
PATH_INFO=/pls/rbdev2_ax/wwv_flow.accept
SCRIPT_NAME=/pls
REMOTE_HOST=
REMOTE_ADDR=192.168.66.169
SERVER_PROTOCOL=HTTP/1.1
REQUEST_PROTOCOL=HTTP
REMOTE_USER=
HTTP_CONTENT_LENGTH=661
HTTP_CONTENT_TYPE=application/x-www-form-urlencoded
HTTP_USER_AGENT=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0)
HTTP_HOST=castor:7778
HTTP_ACCEPT=image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/vnd.ms-powerpoint, application/vnd.ms-excel, application/msword, application/x-shockwave-flash, */*
HTTP_ACCEPT_ENCODING=gzip, deflate
HTTP_ACCEPT_LANGUAGE=en-us
HTTP_ACCEPT_CHARSET=
HTTP_COOKIE=ISCOOKIE=true; LOGIN_USERNAME_COOKIE=rdanko; ORACLE_PLATFORM_REMEMBER_UN=RDANKO:ngrb; WWV_FLOW_USER2=70FBB00945FE46B9; V6_AUTHENTICATION_COOKIE=70FBB00945FE46B9
Authorization=
HTTP_IF_MODIFIED_SINCE=
HTTP_REFERER=http://castor:7778/pls/rbdev2_ax/f?p=147:500:6986070096861669560:::::
HTTP_SOAPACTION=

"theArrow",
It looks like whatever HTML you're including on your page is creating HTML input form elements inside the HTML form "wwv_flow". This form is posted to wwv_flow.accept, and of course, the PL/SQL procedure wwv_flow.accept doesn't know anything these additional arguments/form elements you're attempting to POST.
Joel

Why can't I tell Siri "No" to stop dialing a wrong number? It's embarrassing to keep telling the same people over and over that I mistakenly dialed their number. Even if I yell "stop" or "no" it keeps dialing. Very frustrating.

Why can't I tell Siri "No" to stop dialing a wrong number? It's embarrassing to keep telling the same people over and over that I mistakenly dialed their number. Even if I yell "stop" or "no" it keeps dialing. Very frustrating. Even very simple names. And I talk on the phone for a living. Which is why I need to use Siri to save me time. I speak very clearly. Because of this problem, I've had to even add special code letters before people's names to increase the chances of Siri getting it right, which is only about 70% of the time.

That is not a feature of Siri. Submit your feedback requesting such a feature directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback
Note that yelling at the phone does not improve the chances that Siri will understand you.

How to calculate optimized number of members of WLS cluster

Hi everyone.
I have a Oracle AS Portal 11g that run on a cluster with 2 managed servers. Each of managed server run with 8Gb heap (it is too much, I think so).
My system has two node with 32G RAM each one (that run RHEL 4.x). While monitoring, I see that my server use a little amount of CPU. So, I want to increase the number members of cluster. I read the sizing guide for WebLogic Portal but it was not show any guide to determine how to calculate the optimized number of members of cluster.
I'm stuck in this situation for a week. Because my cluster will became "Warning" state after several days caused by Stuck thread. I want to increase size of cluster to improve HA (I'm trying tuning other factor such as network, DB, I/O, ... )
Please tell me your idea to calculate and design the size of cluster with desired resource (eg: 32Gb RAM total, and 6G heap size for each of WLS instance).
Every reply is appreciated
Regards
Cuong Pham

Looking at your struck thread behaviour of application, even increasing the Managed Server will not help.
Yes of course it may provide few more days of application available than the current condition but on long run definitely you will face the same issue again.
Better understand the reason for threads getting struck with the help of thread dump, stack and troubleshoot the actual issue.
Below link will guide you in over coming this issue if there are no leaks in application and if your application actually requires time to process requests
http://docs.oracle.com/cd/E13222_01/wls/docs92/ConsoleHelp/taskhelp/tuning/TuningExecuteThreads.html
Other Stuck Thread Handling procedures which weblogic provides are given below
WebLogic Server checks for stuck threads periodically. If all application threads are stuck, a server instance marks itself failed, if configured to do so, exits. You can configure Node Manager or a third-part high-availability solution to restart the server instance for automatic failure recovery.
You can configure these actions to occur when not all threads are stuck, but the number of stuck threads have exceeded a configured threshold,
■Shut down the Work Manager if it has stuck threads. A Work Manager that is shut down will refuse new work and reject existing work in the queue by sending a rejection message. In a cluster, clustered clients will fail over to another cluster member.
■Shut down the application if there are stuck threads in the application. The application is shutdown by bringing it into admin mode. All Work Managers belonging to the application are shut down, and behave as described above.
■Mark the server instance as failed and shut it down it down if there are stuck threads in the server. In a cluster, clustered clients that are connected or attempting to connect will fail over to another cluster member.

Pl. help debug - PLS-00306: wrong number or types of arguments in call

Hi,
I am trying to create a wrapper function to all a procedure in Oracle EBusiness Suite 11i.
When I compile the following code
==========
CREATE OR REPLACE PROCEDURE gme.KIL_ProcessAlloc IS
vFileName VARCHAR2(30) := '1006251.csv';
vLoc VARCHAR2(20) := '/u041/applmgr/opm/opmappl/utllog';
v_InHandle utl_file.file_type;
vNewLine VARCHAR2(1000);
vLineNo PLS_INTEGER;
c1 PLS_INTEGER;
c2 PLS_INTEGER;
c3 PLS_INTEGER;
c4 PLS_INTEGER;
c5 PLS_INTEGER;
c6 PLS_INTEGER;
c7 PLS_INTEGER;
c8 PLS_INTEGER;
c9 PLS_INTEGER;
c10 PLS_INTEGER;
c11 PLS_INTEGER;
c12 PLS_INTEGER;
c13 PLS_INTEGER;
c14 PLS_INTEGER;
c15 PLS_INTEGER;
c16 PLS_INTEGER;
c17 PLS_INTEGER;
c18 PLS_INTEGER;
c19 PLS_INTEGER;
c20 PLS_INTEGER;
c21 PLS_INTEGER;
c22 PLS_INTEGER;
c23 PLS_INTEGER;
c24 PLS_INTEGER;
c25 PLS_INTEGER;
c26 PLS_INTEGER;
c27 PLS_INTEGER;
c28 PLS_INTEGER;
c29 PLS_INTEGER;
c30 PLS_INTEGER;
c31 PLS_INTEGER;
c32 PLS_INTEGER;
c33 PLS_INTEGER;
c34 PLS_INTEGER;
TYPE AllocArray IS TABLE OF GME_INVENTORY_TXNS_GTMP%ROWTYPE
INDEX BY BINARY_INTEGER;
l_Allocdata AllocArray;
TYPE MtlDetailArray IS TABLE OF gme_material_details%ROWTYPE
INDEX BY BINARY_INTEGER;
l_MtlDetaildata MtlDetailArray;
TYPE xTranArray IS TABLE OF GME_INVENTORY_TXNS_GTMP%ROWTYPE
INDEX BY BINARY_INTEGER;
l_xtrandata xTranArray;
TYPE defTranArray IS TABLE OF GME_INVENTORY_TXNS_GTMP%ROWTYPE
INDEX BY BINARY_INTEGER;
l_deftrandata defTranArray;
t_messagecount number;
t_messagelist varchar2(10000);
t_returnstatus varchar2(1);
BEGIN
v_InHandle := utl_file.fopen(vLoc, vFileName, 'r');
vLineNo := 1;
LOOP
BEGIN
utl_file.get_line(v_InHandle, vNewLine);
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
vNewLine := TRANSLATE(vNewLine, 'A''', 'A');
c1 := INSTR(vNewLine, ',', 1,1);
c2 := INSTR(vNewLine, ',', 1,2);
c3 := INSTR(vNewLine, ',', 1,3);
c4 := INSTR(vNewLine, ',', 1,4);
c5 := INSTR(vNewLine, ',', 1,5);
c6 := INSTR(vNewLine, ',', 1,6);
c7 := INSTR(vNewLine, ',', 1,7);
c8 := INSTR(vNewLine, ',', 1,8);
c9 := INSTR(vNewLine, ',', 1,9);
c10 := INSTR(vNewLine, ',', 1,10);
c11 := INSTR(vNewLine, ',', 1,11);
c12 := INSTR(vNewLine, ',', 1,12);
c13 := INSTR(vNewLine, ',', 1,13);
c14 := INSTR(vNewLine, ',', 1,14);
c15 := INSTR(vNewLine, ',', 1,15);
c16 := INSTR(vNewLine, ',', 1,16);
c17 := INSTR(vNewLine, ',', 1,17);
c18 := INSTR(vNewLine, ',', 1,18);
c19 := INSTR(vNewLine, ',', 1,19);
c20 := INSTR(vNewLine, ',', 1,20);
c21 := INSTR(vNewLine, ',', 1,21);
c22 := INSTR(vNewLine, ',', 1,22);
c23 := INSTR(vNewLine, ',', 1,23);
c24 := INSTR(vNewLine, ',', 1,24);
c25 := INSTR(vNewLine, ',', 1,25);
c26 := INSTR(vNewLine, ',', 1,26);
c27 := INSTR(vNewLine, ',', 1,27);
c28 := INSTR(vNewLine, ',', 1,28);
c29 := INSTR(vNewLine, ',', 1,29);
c30 := INSTR(vNewLine, ',', 1,30);
c31 := INSTR(vNewLine, ',', 1,31);
c32 := INSTR(vNewLine, ',', 1,32);
c33 := INSTR(vNewLine, ',', 1,33);
c34 := INSTR(vNewLine, ',', 1,34);
-- l_allocdata(vLineNo).sourceno := SUBSTR(vNewLine,1,c1-1);
-- l_allocdata(vLineNo).sizeno := SUBSTR(vNewLine,c1+1,c2-c1-1);
-- l_allocdata(vLineNo).status := SUBSTR(vNewLine,c2+1,c3-c2-1);
-- l_allocdata(vLineNo).latitude := SUBSTR(vNewLine,c3+1,c4-c3-1);
-- l_allocdata(vLineNo).longitude := SUBSTR(vNewLine,c4+1,c5-c4-1);
-- l_allocdata(vLineNo).testfor := SUBSTR(vNewLine,c5+1);
l_allocdata(vLineNo).trans_id := SUBSTR(vNewLine,1,c1-1);
l_allocdata(vLineNo).item_id := SUBSTR(vNewLine,c1+1,c2-c1-1);
l_allocdata(vLineNo).co_code := SUBSTR(vNewLine,c2+1,c3-c2-1);
l_allocdata(vLineNo).orgn_code := SUBSTR(vNewLine,c3+1,c4-c3-1);
l_allocdata(vLineNo).whse_code := SUBSTR(vNewLine,c4+1,c5-c4-1);
l_allocdata(vLineNo).lot_id := SUBSTR(vNewLine,c5+1,c6-c5-1);
l_allocdata(vLineNo).location := SUBSTR(vNewLine,c6+1,c7-c6-1);
l_allocdata(vLineNo).doc_id := SUBSTR(vNewLine,c7+1,c8-c7-1);
l_allocdata(vLineNo).doc_type := SUBSTR(vNewLine,c8+1,c9-c8-1);
l_allocdata(vLineNo).doc_line := SUBSTR(vNewLine,c9+1,c10-c9-1);
l_allocdata(vLineNo).line_type := SUBSTR(vNewLine,c10+1,c11-c10-1);
l_allocdata(vLineNo).reason_code := SUBSTR(vNewLine,c11+1,c12-c11-1);
l_allocdata(vLineNo).trans_date := SUBSTR(vNewLine,c12+1,c13-c12-1);
l_allocdata(vLineNo).trans_qty := SUBSTR(vNewLine,c13+1,c14-c13-1);
l_allocdata(vLineNo).trans_qty2 := SUBSTR(vNewLine,c14+1,c15-c14-1);
l_allocdata(vLineNo).qc_grade := SUBSTR(vNewLine,c15+1,c16-c15-1);
l_allocdata(vLineNo).lot_status := SUBSTR(vNewLine,c16+1,c17-c16-1);
l_allocdata(vLineNo).trans_stat := SUBSTR(vNewLine,c17+1,c18-c17-1);
l_allocdata(vLineNo).trans_um := SUBSTR(vNewLine,c18+1,c19-c18-1);
l_allocdata(vLineNo).trans_um2 := SUBSTR(vNewLine,c19+1,c20-c19-1);
l_allocdata(vLineNo).completed_ind := SUBSTR(vNewLine,c20+1,c21-c20-1);
l_allocdata(vLineNo).staged_ind := SUBSTR(vNewLine,c21+1,c22-c21-1);
l_allocdata(vLineNo).gl_posted_ind := SUBSTR(vNewLine,c22+1,c23-c22-1);
l_allocdata(vLineNo).event_id := SUBSTR(vNewLine,c23+1,c24-c23-1);
l_allocdata(vLineNo).text_code := SUBSTR(vNewLine,c24+1,c25-c24-1);
l_allocdata(vLineNo).transaction_no := SUBSTR(vNewLine,c25+1,c26-c25-1);
l_allocdata(vLineNo).action_code := SUBSTR(vNewLine,c26+1,c27-c26-1);
l_allocdata(vLineNo).material_detail_id := SUBSTR(vNewLine,c27+1,c28-c27-1);
l_allocdata(vLineNo).organization_id := SUBSTR(vNewLine,c28+1,c29-c28-1);
l_allocdata(vLineNo).locator_id := SUBSTR(vNewLine,c29+1,c30-c29-1);
l_allocdata(vLineNo).subinventory := SUBSTR(vNewLine,c30+1,c31-c30-1);
l_allocdata(vLineNo).alloc_um := SUBSTR(vNewLine,c31+1,c32-c31-1);
l_allocdata(vLineNo).alloc_qty := SUBSTR(vNewLine,c32+1,c33-c32-1);
l_allocdata(vLineNo).def_trans_ind := SUBSTR(vNewLine,c33+1,c34-c33-1);
vLineNo := vLineNo+1;
END LOOP;
utl_file.fclose(v_InHandle);
FOR i IN 1..vLineNo-1 loop
GME_API_PUB.insert_line_allocation (
     1,
     100,
     FALSE,
     True,
     l_allocdata(i),
     null,
     null,
     false,
     false,
     false,
     l_MtlDetailData,
     l_xtrandata,
     l_deftrandata,
     t_messagecount,
     t_messagelist,
     t_returnstatus);
end loop;
     IF (t_returnstatus <> 'S') THEN
for i IN 1 .. t_messagecount LOOP
dbms_output.put_line('The text is '||FND_MSG_PUB.get(i,t_messagelist));
END LOOP;
END IF;
-- COMMIT;
EXCEPTION
WHEN OTHERS THEN
RAISE;
END KIL_ProcessAlloc;
===============
I get this
Warning: Procedure created with compilation errors.
SQL> sho err
Errors for PROCEDURE GME.KIL_PROCESSALLOC:
LINE/COL ERROR
145/8 PLS-00306: wrong number or types of arguments in call to
'INSERT_LINE_ALLOCATION'
145/8 PL/SQL: Statement ignored
=================
The package specs of GME_API_PU is under:
===============
PROCEDURE insert_line_allocation (
p_api_version IN NUMBER := gme_api_pub.api_version
,p_validation_level IN NUMBER := gme_api_pub.max_errors
,p_init_msg_list IN BOOLEAN := FALSE
,p_commit IN BOOLEAN := FALSE
,p_tran_row IN gme_inventory_txns_gtmp%ROWTYPE
,p_lot_no      IN     VARCHAR2 DEFAULT NULL
,p_sublot_no      IN     VARCHAR2 DEFAULT NULL
,p_create_lot     IN BOOLEAN DEFAULT FALSE
,p_ignore_shortage     IN BOOLEAN DEFAULT FALSE
,p_scale_phantom     IN BOOLEAN DEFAULT FALSE
,x_material_detail     OUT gme_material_details%ROWTYPE
,x_tran_row     OUT gme_inventory_txns_gtmp%ROWTYPE
,x_def_tran_row     OUT gme_inventory_txns_gtmp%ROWTYPE
,x_message_count OUT NUMBER
,x_message_list OUT VARCHAR2
,x_return_status     OUT VARCHAR2);
GME_API_PUB.insert_line_allocation
===========
What am I doing wrong...why am I getting PLS-00306.
Can someone help?
Thank you
Sundar
[email protected]

Hi John,
Thanks a ton - a nice Christmas gift. Thank you for being a Santa :-).
I used the same subscript as the one used for in parameter and the procedure compiled without errors.
A corollary: If (any of the) Out parameter is null (all columns of the row/array), will the array row element still be stored ? May be I cross the bridge when I come to it.
Merry Christmas.
Sundar

Issue with proc-ora-06550 wrong number or types of arguments in call to

Hi....
When i am running the flollwing procedure as
SQL> exec Prc_WA_Default_Currt_flag(15445);
the following error is thrown.......could someone help me and please let me know how this can be corrected.
BEGIN Prc_WA_Default_Currt_flag(15445); END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to
'PRC_WA_DEFAULT_CURRT_FLAG'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
***proc code****
CREATE OR REPLACE procedure Prc_WA_Default_Currt_flag(Instance_Id_Upd_in in number,dummy1 out number) as
Instance_Id_Upd1 number;
dummy2 number;
cursor c1 is select rwid from wa_temp_default;
begin
Instance_Id_Upd1:=Instance_Id_Upd_in;
for i in c1 loop
update default_event_log set current_flag=null,Instance_id_upd=Instance_Id_Upd1
where rowid =i.rwid and load_date<(select currLoadtime from wa_batch where
jobname='Default_event_log') and current_flag='Y';
end loop;
commit;
for i in c1 loop
update default_event_log set current_flag='Y'
where load_date>=(select currLoadtime from wa_batch where
jobname='Default_event_log') and rowid=i.rwid;
end loop;
commit;
select to_number(Instance_Id_Upd1) into dummy1 from dual;
end;
/

Hi,
Since it contains an out parameter it has to run this way
declare
dummy_out number;
begin
prc_wa_default_currt_flag(15445,dummy_out);
end;Regards
Anurag

TOP n sometimes gives wrong number of lines (SSRS 2008 SP1)

Hello all,
a workmate has created a dashboard report which contains (among other items) a top n chart item. The user can select the value of n using a report parameter. We have observered that for some values of n and specific values of the other parameters the chart shows the wrong number of lines (bars), e.g. I choose to select TOP 5, but the chart shows in some cases the TOP 6.
Is such a behaviour already known?
I will try to create a minimal sample for reproducing this behaviour during the next few days.
Thanks in advance and best regards,
Gerald

Hi Jerry, I already tried this but for some reosan when i add the second filter data mismatches, I have used sort on $$ which is a requirement in my case.
Data with one filter($$) and Sort on ($$):
NBR
Desc
QTY
$$
Perc
67
MG
MIS
105
$7,197.44
64.02%
67
BR
BRO
21
$1,439.49
12.80%
67
CH
CHI
10
$685.47
6.10%
67
CR
CRA
7
$479.83
4.27%
67
LT
LSE
5
$342.74
3.05%
67
CF
FINISH
4
$274.19
2.44%
67
PW
PACKED
3
$205.64
1.83%
67
BL
BLIS
2
$137.09
1.22%
67
DN
DENT
2
$137.09
1.22%
67
CL
CLOU
1
$68.55
0.61%
67
CP
PURCHASE
1
$68.55
0.61%
67
IC
CONSTRUCTION
1
$68.55
0.61%
67
SH
SCRA
1
$68.55
0.61%
67
SS
SPLIT
1
$68.55
0.61%
Data when second filter($$ and Desc) added
NBR
Desc
QTY
$$
Perc
67
MG
MIS
105
$7,197.44
64.02%
67
CR
CRA
7
$479.83
4.27%
67
LT
LSE
5
$342.74
3.05%
67
PW
PACKED
3
$205.64
1.83%
67
DN
DENT
2
$137.09
1.22%
67
CL
CLOU
1
$68.55
0.61%
67
CP
PURCHASE
1
$68.55
0.61%
67
IC
CONSTRUCTION
1
$68.55
0.61%
67
SH
SCRA
1
$68.55
0.61%
67
SS
SPLIT
1
$68.55
0.61%
It displays only ten rows but you can see some of the rows Bro, Chi are missing(not sorted as above) when second filter is added on Desc column

Wrong number or types of argumnet in a call to error

Hi all,
Below is my stored proc and it has a input parameter 'c_count_or_perc' . I have passed value to this parameter as in the if block.
But I got the error as "wrong number or types of argumnet in a call to ' .
I really dont know how to pass input value to this parameter .
Could anyone please help?
{code}
PROCEDURE edr_rpt_gen_error_by_hour
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
c_count_or_perc IN VARCHAR2 ,
report_data OUT SYS_REFCURSOR,
chart_data OUT SYS_REFCURSOR,
footer_data OUT SYS_REFCURSOR
{code}
In below 'IF THEN ELSE' block , ( based on the <condition> ) , I dont know how to pass value to input parameter c_count_or_perc .
{code}
          IF (c_count_or_perc = 'ERROR BY HOUR') THEN
               my_error_text := get_row_error_text;
               my_total_text := get_row_total_text;
          ELSE
          my_error_text := get_row_error_text;
               my_total_text := '';
               DELETE edr_report_by_hour_output
               WHERE row_type = 'Summary Row'
               AND row_type = 'Final Row';
          END IF;
{code}
Here I have pasted the full package. Could please tell me , what are ways tht I could pass value to the given input parameter.
{code}
CREATE OR REPLACE PACKAGE edr_rpt_error_by_hour_package AS
PROCEDURE edr_rpt_gen_error_by_hour
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
c_count_or_perc IN VARCHAR2 ,
report_data OUT SYS_REFCURSOR,
chart_data OUT SYS_REFCURSOR,
footer_data OUT SYS_REFCURSOR
FUNCTION error_data
in_lane_id edr_report_by_hour_output.lane_id%TYPE,
in_direction_id edr_report_by_hour_output.direction_id%TYPE,
in_interval_start_date_time edr_report_by_hour_output.interval_start_date_time%TYPE,
in_interval_end_date_time edr_report_by_hour_output.interval_end_date_time%TYPE,
in_hour_start edr_report_by_hour_output.hour_start%TYPE,
in_hour_end edr_report_by_hour_output.hour_end%TYPE,
in_min_error NUMBER,
in_max_error NUMBER
RETURN NUMBER;
END edr_rpt_error_by_hour_package;
CREATE OR REPLACE PACKAGE BODY edr_rpt_error_by_hour_package AS
FUNCTION error_data
in_lane_id edr_report_by_hour_output.lane_id%TYPE,
in_direction_id edr_report_by_hour_output.direction_id%TYPE,
in_interval_start_date_time edr_report_by_hour_output.interval_start_date_time%TYPE,
in_interval_end_date_time edr_report_by_hour_output.interval_end_date_time%TYPE,
in_hour_start edr_report_by_hour_output.hour_start%TYPE,
in_hour_end edr_report_by_hour_output.hour_end%TYPE,
in_min_error NUMBER,
in_max_error NUMBER
RETURN NUMBER
IS
my_count_result NUMBER(18);
BEGIN
SELECT NVL(SUM(error_count), 0 )
INTO my_count_result
FROM
SELECT site_lane_id
FROM edr_rpt_tmp_report_lanes
WHERE edr_rpt_tmp_report_lanes.output_lane_id = in_lane_id
AND edr_rpt_tmp_report_lanes.output_direction_id = in_direction_id
) report_lanes
JOIN edr_error_by_hour_report_data
ON edr_error_by_hour_report_data.site_lane_id = report_lanes.site_lane_id
AND edr_error_by_hour_report_data.bin_start_date_time >= in_interval_start_date_time
AND edr_error_by_hour_report_data.bin_start_date_time < in_interval_end_date_time
AND edr_error_by_hour_report_data.hour >= in_hour_start
AND edr_error_by_hour_report_data.hour < in_hour_end
AND edr_error_by_hour_report_data.error_code >= in_min_error
AND edr_error_by_hour_report_data.error_code <= in_max_error
return my_count_result;
END error_data;
FUNCTION get_row_error_text
RETURN VARCHAR2
IS
my_row_error_text VARCHAR2(10000);
my_row_error_entry VARCHAR2(10000);
CURSOR row_error_text IS
SELECT 'edr_rpt_error_by_hour_package.error_data('
||'lane_id, '
||'direction_id, '
||'interval_start_date_time, '
||'interval_end_date_time, '
||'hour_start, '
||'hour_end, '
|| error_code || ', '
|| error_code || ') "'|| error_message.error_short_message || '"'
FROM error_message
WHERE error_code >= 0 and error_code < 19
ORDER BY error_code;
BEGIN
my_row_error_text := '';
my_row_error_entry := '';
-- generate the error code function calls
OPEN row_error_text;
LOOP
FETCH row_error_text INTO my_row_error_entry;
EXIT WHEN row_error_text%NOTFOUND;
my_row_error_text := my_row_error_text || ', ' || my_row_error_entry;
END LOOP;
CLOSE row_error_text;
RETURN my_row_error_text;
END get_row_error_text;
FUNCTION get_row_total_text
RETURN VARCHAR2
IS
my_row_error_text VARCHAR2(10000);
BEGIN
my_row_error_text := '';
-- generate the 'total' column function call
SELECT 'edr_rpt_error_by_hour_package.error_data('
||'lane_id, '
||'direction_id, '
||'interval_start_date_time, '
||'interval_end_date_time, '
||'hour_start, '
||'hour_end, '
|| MIN(error_code) || ', '
|| MAX(error_code) || ') "Total"'
INTO my_row_error_text
FROM error_message
WHERE error_code >= 0 and error_code < 19;
RETURN (', ' || my_row_error_text);
END get_row_total_text;
FUNCTION get_error_data_pct
in_lane_id edr_report_by_hour_output.lane_id%TYPE,
in_direction_id edr_report_by_hour_output.direction_id%TYPE,
in_interval_start_date_time edr_report_by_hour_output.interval_start_date_time%TYPE,
in_interval_end_date_time edr_report_by_hour_output.interval_end_date_time%TYPE,
in_hour_start edr_report_by_hour_output.hour_start%TYPE,
in_hour_end edr_report_by_hour_output.hour_end%TYPE,
in_min_error NUMBER,
in_max_error NUMBER
RETURN NUMBER
IS
     my_count NUMBER(18);
     my_total NUMBER(18);
     my_count_pct NUMBER(18);
     my_count_result NUMBER(18);
BEGIN
          my_count_pct := 0 ;
          my_count_result := error_data (
in_lane_id,
in_direction_id,
in_interval_start_date_time,
in_interval_end_date_time,
in_hour_start,
in_hour_end,
in_min_error,
in_max_error
          IF (my_count_result > 0 ) THEN
          my_total := error_data (
in_lane_id,
in_direction_id,
in_interval_start_date_time,
in_interval_end_date_time,
in_hour_start,
in_hour_end,
1,
19
          my_count_pct := ROUND((my_count_result / my_total) * 100 ,2);
     END IF;
          return my_count_pct;
END get_error_data_pct;
PROCEDURE edr_error_by_hour_use_per_veh
in_report_parameter_id IN report_tasks.report_task_id%TYPE
IS
BEGIN
DELETE FROM edr_error_by_hour_report_data;
INSERT INTO edr_error_by_hour_report_data
site_id,
site_lane_id,
bin_start_date_time,
hour,
error_code,
error_count
SELECT
site_id,
site_lane_id,
bin_start_date_time,
hour,
error_code,
COUNT(1)
FROM (SELECT site_id,
site_lane_id,
( SELECT NVL(MAX(interval_start_date_time), date_time)
FROM edr_rpt_tmp_grouping_table
WHERE interval_start_date_time <= date_time) bin_start_date_time,
TO_NUMBER(TO_CHAR(date_time, 'hh24')) hour,
NVL(traffic_error.error_code, 0) error_code
FROM edr_error_by_hour_veh_data
LEFT OUTER JOIN traffic_error
ON traffic_error.record_id = edr_error_by_hour_veh_data.record_id
) vehicles
GROUP BY
site_id,
site_lane_id,
bin_start_date_time,
hour,
error_code;
END edr_error_by_hour_use_per_veh;
PROCEDURE edr_error_by_hour_data_type
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
in_data_type IN VARCHAR2,
out_data_type_used OUT VARCHAR2
IS
my_bin_entry_count NUMBER(12,0);
my_veh_entry_count NUMBER(12,0);
BEGIN
IF(UPPER(in_data_type) = 'BINNED') THEN
-- Error information can only be read from Per Vehicle data records
-- - using bins-only is not a supported option
RAISE_APPLICATION_ERROR(-20101,'Binned data cannot be used for this report.');
ELSIF (UPPER(in_data_type) = 'PERVEHICLE')
OR (UPPER(in_data_type) = 'COMBINED')
THEN
out_data_type_used := 'Per Vehicle (All Vehicles)';
edr_error_by_hour_use_per_veh( in_report_parameter_id );
ELSE
RAISE_APPLICATION_ERROR(-20101, 'The data type specified is not recognized.');
END IF;
END edr_error_by_hour_data_type;
PROCEDURE edr_error_by_hour_get_veh_data
in_report_parameter_id IN NUMBER,
in_site_id IN NUMBER,
in_start_date_time IN TIMESTAMP,
in_end_date_time IN TIMESTAMP,
in_report_level_min IN NUMBER,
in_report_level_max IN NUMBER
IS
BEGIN
--Clear the edr_error_by_hour_veh_data temporary table and populate it with the data for the requested
--report.
DELETE FROM edr_error_by_hour_veh_data;
INSERT INTO edr_error_by_hour_veh_data
site_id,
site_lane_id,
record_id,
date_time,
vehicle_error_count,
vehicle_status
SELECT site_to_data_source_lane_v.site_id,
site_to_data_source_lane_v.site_lane_id,
traffic_record.record_id,
traffic_record.datetime,
NVL((SELECT COUNT(1)
FROM traffic_error
WHERE traffic_error.record_id = traffic_record.record_id), 0) vehicle_error_count,
NVL((SELECT SUM(status_code)
FROM traffic_status
WHERE traffic_status.record_id = traffic_record.record_id), 0) vehicle_status
FROM traffic_record
LEFT OUTER JOIN traffic_class
ON traffic_record.record_id = traffic_class.record_id
JOIN site_to_data_source_lane_v
ON traffic_record.data_source_id = site_to_data_source_lane_v.data_source_id
AND traffic_record.lane = site_to_data_source_lane_v.data_source_lane_id
JOIN edr_rpt_tmp_report_lanes
ON site_to_data_source_lane_v.site_lane_id = edr_rpt_tmp_report_lanes.site_lane_id
JOIN edr_rpt_tmp_report_classes
ON NVL(traffic_class.v_class, 0) = edr_rpt_tmp_report_classes.class_id
JOIN edr_rpt_tmp_inclusion_table
ON TRUNC(traffic_record.datetime) = TRUNC(edr_rpt_tmp_inclusion_table.date_time)
WHERE site_to_data_source_lane_v.site_id = in_site_id
AND traffic_record.datetime >= in_start_date_time
AND traffic_record.datetime < in_end_date_time
AND traffic_class.class_level >= in_report_level_min
AND traffic_class.class_level <= in_report_level_max;
END edr_error_by_hour_get_veh_data;
PROCEDURE edr_rpt_gen_error_by_hour
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
c_count_or_perc IN VARCHAR2 ,
report_data OUT SYS_REFCURSOR,
chart_data OUT SYS_REFCURSOR,
footer_data OUT SYS_REFCURSOR
AS
my_date_format_mask VARCHAR2(50);
my_start_date_time TIMESTAMP;
my_end_date_time TIMESTAMP;
my_lane_grouping VARCHAR2(10);
my_interval_duration NUMBER(2);
my_site_id sites.site_id%TYPE;
my_selected_data_type VARCHAR2(50);
my_used_data_type VARCHAR2(50);
my_report_data_statement VARCHAR2(25000);
my_chart_data_statement VARCHAR2(25000);
my_good_weight_viol_total NUMBER(12,0);
my_data_type_used VARCHAR2(50);
my_per_vehicle_total NUMBER(12,0);
my_binned_vehicle_total NUMBER(12,0);
my_error_vehicle_total NUMBER(12,0);
my_status_vehicle_total NUMBER(12,0);
my_good_weight_total NUMBER(12,0);
my_status_clear_total NUMBER(12,0);
my_good_weight_statuses_mask NUMBER(12,0);
my_error_text VARCHAR2(25000);
my_total_text VARCHAR2(25000);
my_error_row_pct_report VARCHAR2(25);
BEGIN
my_date_format_mask := edr_rpt_generic_package.edr_rpt_get_date_format_mask(in_report_parameter_id);
my_start_date_time := edr_rpt_generic_package.edr_rpt_get_start_date_time(in_report_parameter_id, my_date_format_mask);
my_end_date_time := edr_rpt_generic_package.edr_rpt_get_end_date_time(in_report_parameter_id, my_date_format_mask);
my_lane_grouping := edr_rpt_generic_package.edr_rpt_get_lane_grouping(in_report_parameter_id);
my_site_id := edr_rpt_generic_package.edr_rpt_get_site_id(in_report_parameter_id);
my_selected_data_type := edr_rpt_generic_package.edr_rpt_get_data_type(in_report_parameter_id);
-- ensure selected classes and lanes temp tables have been populated
edr_rpt_generic_package.edr_rpt_gen_tmp_lanes(in_report_parameter_id);
edr_rpt_generic_package.edr_rpt_gen_tmp_classes(in_report_parameter_id);
my_good_weight_statuses_mask := edr_rpt_generic_package.get_good_weight_status_mask(in_report_parameter_id);
edr_rpt_generic_package.edr_rpt_gen_inclusion_table(
in_report_parameter_id,
my_date_format_mask,
my_start_date_time,
my_end_date_time
edr_rpt_generic_package.edr_rpt_gen_grouping_table(
in_report_parameter_id,
my_date_format_mask,
my_start_date_time,
my_end_date_time
edr_rpt_generic_package.gen_rpt_by_hour_output_table
in_report_parameter_id
edr_rpt_error_by_hour_package.edr_error_by_hour_get_veh_data
in_report_parameter_id,
my_site_id,
my_start_date_time,
my_end_date_time,
0, --Hardcoded until reclassification is supported.
0 --Hardcoded until reclassification is supported.
edr_rpt_error_by_hour_package.edr_error_by_hour_data_type
in_report_parameter_id,
my_selected_data_type,
my_used_data_type
          IF (c_count_or_perc = 'ERROR BY HOUR') THEN
               my_error_text := get_row_error_text;
               my_total_text := get_row_total_text;
          ELSE
          my_error_text := get_row_error_text;
               my_total_text := '';
               DELETE edr_report_by_hour_output
               WHERE row_type = 'Summary Row'
               AND row_type = 'Final Row';
          END IF;
COMMIT;
my_report_data_statement :=
'SELECT rank "Rank", '
|| ' ROW_TYPE "Row Type", '
|| ' interval_start_date_time "Date", '
|| ' interval_start_date_time, '
|| ' hour_label "Chart X-Axis", '
|| ' lane_id "Group Id" , '
|| ' ''None'' "Group Name", '
|| ' hour_label "Hour" '
|| my_error_text
|| my_total_text
|| ' FROM edr_report_by_hour_output '
|| ' ORDER BY lane_id, '
|| ' direction_id, '
|| ' interval_start_date_time, '
|| ' hour_end, '
|| ' rank, '
|| ' hour_start'
dbms_output.put_line('SQL start------------------------');
dbms_output.put_line(my_report_data_statement);
dbms_output.put_line('SQL end--------------------------');
my_chart_data_statement :=
' SELECT hour_start "X Axis", '
|| ' lane_id "Group" '
|| edr_rpt_error_by_hour_package.get_row_error_text
|| ' FROM '
|| ' ( '
|| ' SELECT lane_id, '
|| ' direction_id, '
|| ' hour_start, '
|| ' hour_end, '
|| ' min(interval_start_date_time) interval_start_date_time, '
|| ' max(interval_end_date_time) interval_end_date_time '
|| ' FROM edr_report_by_hour_output '
|| ' WHERE hour_end = hour_start + 1 '
|| ' GROUP BY lane_id, direction_id, hour_start, hour_end '
|| ' ) '
|| ' order by "Group", hour_start '
dbms_output.put_line('SQL start------------------------');
dbms_output.put_line(my_chart_data_statement);
dbms_output.put_line('SQL end--------------------------');
SELECT my_used_data_type
INTO my_data_type_used
FROM SYS.DUAL;
SELECT NVL(COUNT(record_id), 0)
INTO my_per_vehicle_total
FROM edr_error_by_hour_veh_data;
SELECT NVL(COUNT(record_id), 0)
INTO my_status_vehicle_total
FROM edr_error_by_hour_veh_data
WHERE vehicle_status > 0
AND vehicle_error_count = 0;
SELECT NVL(COUNT(record_id), 0)
INTO my_error_vehicle_total
FROM edr_error_by_hour_veh_data
WHERE vehicle_error_count > 0;
SELECT NVL(COUNT(record_id), 0)
INTO my_status_clear_total
FROM edr_error_by_hour_veh_data
WHERE vehicle_status = 0
AND vehicle_error_count = 0;
SELECT NVL(SUM(error_count), 0)
INTO my_binned_vehicle_total
FROM edr_error_by_hour_report_data;
SELECT NVL(COUNT(DISTINCT edr_error_by_hour_veh_data.record_id), 0)
INTO my_good_weight_total
FROM edr_error_by_hour_veh_data
WHERE vehicle_error_count = 0
AND BITAND(vehicle_status, my_good_weight_statuses_mask) = 0;
-- insert vehicle totals into the temporary table
DELETE FROM edr_rpt_tmp_veh_totals_table;
INSERT INTO edr_rpt_tmp_veh_totals_table
data_type_used,
per_vehicle_total,
binned_vehicle_total,
error_vehicle_total,
status_vehicle_total,
good_weight_total,
status_clear_total
SELECT my_data_type_used,
my_per_vehicle_total,
my_binned_vehicle_total,
my_error_vehicle_total,
my_status_vehicle_total,
my_good_weight_total,
my_status_clear_total
FROM SYS.DUAL;
-- execute the query into the output refcursor
OPEN report_data FOR
my_report_data_statement;
OPEN chart_data FOR
my_chart_data_statement;
OPEN footer_data FOR
SELECT data_type_used,
per_vehicle_total,
binned_vehicle_total,
error_vehicle_total,
status_vehicle_total,
good_weight_total,
status_clear_total
FROM edr_rpt_tmp_veh_totals_table;
END edr_rpt_gen_error_by_hour;
END edr_rpt_error_by_hour_package;
{code}

Hi,
Thx for the reply.
As the store proc is inside the package and its invoked in visual studio.
I used to compile the pkg in SQL plus and it throws the error as ' wrong number or types of argument in a call to the stored proc 'edr_rpt_gen_error_by_hour'
As I'm new to pl/sql programming , i really dont know how to pass value to the input parameter.
Edited by: user10641405 on Nov 18, 2009 7:27 PM
Edited by: user10641405 on Nov 18, 2009 7:29 PM

PLS-00306: wrong number or types of arguments in call in a for loop

Dear all
I recently put up another post about the same error message but as the message now relates to another part of my programme and, in my mind at least, a different conceptual idea, I thought I should start a new top. If that is not right thing to have done then please let me know. I am working in 10.2.
I am trying to pass through multiple variables. When I run the code at the end of this question I get an error message:
PLS-00306: wrong number or types of arguments in call to 'CUR_MAP_LIST'This relates to the line:
FOR var_map_list IN cur_map_list (par_map_list (n))I think the reason the error message comes up is because par_map_list is a associate array / PL/SQL table and cur_map_list is based on %rowtype. Although I could be wrong. However I am not sure what I should be doing so that I don't get such an error message.
I was reading through page 623 on Web Development 9i (by Brown; pub. McGrew-Hill) and pages 357-358 of Oracle Web Application Programming for PL/SQL Developers (by Boardman, Caffrey, Morse, Rosenzweig; pub. Prentice Hall), in order to try and write my code. As well as Oracle's Application Developer’s Guide - Fundamentals (Release 2), page 11-6. In particular the Web Development book uses the following:
create or replace procedure query_department
(in_dept_no owa_util.ident_arr)
is
cursor dept_cursor (nbt_dept_no emp.deptno%TYPE) is
select empno, ename, mgr, sal, comm
from scott.emp
where deptno = nbt_dept_no;
begin
for x in 1 .. in_dept_no.count loop
    for dept_rec in dept_cursor(in_dept_no (x)) loop
    end loop;
end loop;
end;In that example the cursor selects empno, ename, mgr, sal and comm from emp. So if it is doing that the cursor must be of a VARCHAR2 and NUMBER data type. What I don't understand is the for dept_rec in part. For a start I am not sure where dept_rec comes from? If it is a NUMBER data type, how can the in_dept_no, which is a owa_util.ident_arr associate array / PL/SQL data type work with it. Unfortunately because the example is incomplete and doesn't include procedures relating to the in variables, I am unable to run it and try and learn from what it is doing, so that I can try and relate the concept to my own work.
My programme is as follows. There may be other errors in the code not relating to this error. If so I hope to find these and resolve them once I understand what I should be doing here:
--Global variables--
gvar_mapviewer_host VARCHAR2(56) := 'http://tiger.iso.port.ac.uk:7785/mapviewer/omserver';
gvar_proc_host VARCHAR2(56) := 'http://tiger.iso.port.ac.uk:7785/www/geg50160';
gvar_xml_request VARCHAR2(100) :='?xml_request=<?xml version="1.0" standalone="yes"?>';
--Main calling programming--
PROCEDURE MAPS AS
empty owa_util.ident_arr;
var_xml_theme VARCHAR2(32767);
BEGIN
PROCMAPLIST (empty, var_xml_theme);
END maps;
--create checkboxes--
PROCEDURE PROCCHECKLIST
(par_check_list IN OUT owa_util.ident_arr,
par_xml_theme OUT VARCHAR2
AS
   CURSOR cur_map_list IS
    SELECT MT.map_title
           MI.map_id
           OMSN.map_sheet_number_id
           WRMF.web_raster_map_id
     FROM MAP_TITLE MT
          MAP_INFO MI
          MAP_SHEET_NUMBER OMSN,
          WEB_RASTER_MAP_FILE WRMF,
      WHERE MI.map_title_id = MT.map_title_id
      AND   MI.map_id = OMSN.map_id
      AND   WRMF.map_id = MI.map_id
      AND   WRMF.map_sheet_number_id = OMSN.map_sheet_number_id;
    var_map_list cur_map_list%ROWTYPE;
    var_xml_theme VARCHAR2(32767);
BEGIN
htp.htmlOpen;
htp.headOpen;
htp.headClose;
htp.bodyOpen;
htp.print('<FORM METHOD = "post"
                 ACTION = "'||gvar_proc_host||'.mappackage.procdisplay">');
    htp.print('<FIELDSET>
                 <LEGEND> Select the maps you wish to display </LEGEND>');
FOR n IN 1 .. par_map_list.COUNT
LOOP
FOR var_map_list IN cur_map_list (par_map_list (n))
LOOP
htp.print('       <UL>
                   <LI>
                    <LABEL FOR = "WRMF'||
                                  var_map_list.web_raster_map_id||'">
                     <INPUT type = "checkbox"
                            id = "WRMFB'||
                                  var_map_list.web_raster_map_id||'"
                            name = "WRMFB'||
                                    var_map_list.web_raster_map_id||'"
                            value = "'||var_map_list.web_raster_map_id||'"
                            />
                             Map title: '|| var_map_list.map_title||'<BR>
                             Sheet number: '||var_map_list.map_sheet_number||'');
                    htp.print('</LABEL>
                   </LI>
                  </UL>');
    END LOOP;
END LOOP;
     htp.print('</FIELDSET>');
     htp.print('<p>
                 <INPUT TYPE = "submit"
                        NAME = "Display&nbspselected&nbspmaps"
                        VALUE = "Display selected maps" />
                  </FORM>');
htp.bodyClose;
END PROCCHECKLIST;Thank you for reading. Kind regards
Tim

Dear everyone
I have now resolved the problems I was having with multiple values and checkboxes, thanks to comments in this thread, read large chucks of Oracle PL/SQL Programming by Steve Feuerstein and suddenly realising where I am going wrong in terms of thinking.
For a start, I when I was dealing with the multiple values, I was trying to get PL/SQL to pass them out. Of course this is done by the action part of the input form. Although I have not done much web coding, I did know about this. However because I was so engrossed in trying to understand how multiple values work, I didn't relate the two ideas. I even mind mapping the problem and still didn't get it.
I also did not think to change my the action from post command to get, so that I could see what was coming out. However that would not have made too much of a difference because the other problem I had was related to where sub programmes were declared. The function which received the values was privately declared, and not in the package spec. This meant the web browser could not find the function as that can only make use of the programmes declared publicly.
Once I made these changes, as well as correcting other minor typing mistakes, the values passed through as expected. The only other mistake I made was to include the name option after the submit input type. In my case I did not need to submit the value of that button. The revised code is as follows. In this version I replaced the function with a procedure that simply prints the checkbox values to screen. I have also made the input form action get, instead of post, so that the values can be seen in the web browser address bar:
create or replace
PACKAGE MAPSITE AS
PROCEDURE MAPS;
PROCEDURE PROCCHECKLIST
(par_check_list IN OUT OWA_UTIL.IDENT_ARR
PROCEDURE PROCDISPLAY
(maplist IN OUT OWA_UTIL.IDENT_ARR);
END MAPSITE;
create or replace
PACKAGE BODY MAPSITE AS
--Global variables--
gvar_mapviewer_host VARCHAR2(56) := 'http://tiger.iso.port.ac.uk:7785/mapviewer/omserver';
gvar_proc_host VARCHAR2(56) := 'http://tiger.iso.port.ac.uk:7785/www/geg50160';
gvar_xml_request VARCHAR2(100) :='?xml_request=<?xml version="1.0" standalone="yes"?>';
--Main calling programming--
PROCEDURE MAPS AS
empty owa_util.ident_arr;
BEGIN
PROCCHECKLIST (empty);
END MAPS;
--create checkboxes--
PROCEDURE PROCCHECKLIST
(par_check_list IN OUT owa_util.ident_arr
AS
   CURSOR cur_map_list IS
    SELECT MT.map_title,
           MI.map_id,
           OMSN.map_sheet_number_id,
           WRMF.web_raster_map_id
     FROM MAP_TITLE MT,
          MAP_INFO MI,
          MAP_SHEET_NUMBER OMSN,
          WEB_RASTER_MAP_FILE WRMF
      WHERE MI.map_title_id = MT.map_title_id
      AND   MI.map_id = OMSN.map_id
      AND   WRMF.map_id = MI.map_id
      AND   WRMF.map_sheet_number_id = OMSN.map_sheet_number_id;
BEGIN
htp.htmlOpen;
htp.headOpen;
htp.headClose;
htp.bodyOpen;
htp.print('<FORM METHOD = "post"
                 ACTION = "'||gvar_proc_host||'.mappackage.procdisplay">');
    htp.print('<FIELDSET>
                 <LEGEND> Select the maps you wish to display </LEGEND>');
FOR var_map_list IN cur_map_list
LOOP
htp.print('       <UL>
                   <LI>
                    <LABEL FOR = "WRMF'||
                                  var_map_list.web_raster_map_id||'">
                     <INPUT type = "checkbox"
                            id = "WRMFB'||
                                  var_map_list.web_raster_map_id||'"
                            name = "maplist"
                            CHECKED = "' ||
                                       par_map_list ||'"
                            value = "'||var_map_list.web_raster_map_id||'"
                            />
                             Map title: '|| var_map_list.map_title||'<BR>
                             Sheet number: '||var_map_list.map_sheet_number||'');
                    htp.print('</LABEL>
                   </LI>
                  </UL>');
    END LOOP;
     htp.print('</FIELDSET>');
     htp.print('<p>
                 <INPUT TYPE = "submit"
                        VALUE = "Display selected maps" />
                  </FORM>');
htp.bodyClose;
END PROCCHECKLIST;
---PROCDISPLAY PROCEDURE---
PROCEDURE PROCDISPLAY (maplist IN OUT owa_util.ident_arr)
IS
BEGIN
FOR n IN 1..maplist.COUNT
LOOP
htp.print('Checkbox value i.e. var_map_list.web_raster_map_id is: ' ||maplist(n)||'
<P>');
END LOOP;
END PROCDISPLAY;
END MAPSITE;Kind regards
Tim

PLS-00306 wrong number or types of arguments in call to 'PUT_LINE'

Hi Guys,
I'm practising the plsql workouts,during a anonymous PL/SQL block i got the below error,what the mistake i did ?
declare
v1 employee_290512%rowtype;
cursor c1 is select * from employee_290512;
begin
open c1;
loop
fetch c1 into v1;
exit when c1% notfound;
dbms_output.put_line(v1);
end loop;
end;
{/code}
And i got the below error
Error:
ORA-06550: line 10, column 1:
PLS-00306: wrong number or types of arguments in call to 'PUT_LINE'
ORA-06550: line 10, column 1:
PL/SQL: Statement ignored
/Error.
Please help me on this.
Regards
Thelak

Hi there,
i got the same error. kindly check what's wrong with my below coding;
SQL> SET SERVEROUTPUT ON
SQL> DECLARE
2 TYPE Type_Tab_Data IS RECORD
3 (
4 ARMZIG_Q2SFX char(3),
5 somme number(20,2),
6 ARMZIG_Q2AN8 number(8),
7 ARMZIG_Q2DOC number(8),
8 ARMZIG_Q2DCT char(2),
9 ARMZIG_Q2CO varchar2(15 char)
10 );
11 TYPE Tab_Data IS TABLE OF Type_Tab_Data INDEX BY BINARY_INTEGER ;
12 t_flexnum5 Tab_Data;
13 v_test pls_integer;
14 v_text_erreur varchar2(200 char);
15 BEGIN
16 SELECT b.ARMZIG_Q2SFX,a.somme,a.ARMZIG_Q2AN8,a.ARMZIG_Q2DOC,a.ARMZIG_Q2DCT,a.ARMZIG_Q2CO
17 BULK COLLECT INTO t_flexnum5
18 from
19 (
20 SELECT sum(ARMZIG_Q2AAP/100)as somme,ARMZIG_Q2AN8,ARMZIG_Q2DOC,ARMZIG_Q2DCT,ARMZIG_Q2CO
21 from ARMAST_ZIG_EUR
22 where ENVZIG_ID = 'E'
23 group by ARMZIG_Q2AN8,ARMZIG_Q2DOC,ARMZIG_Q2DCT,ARMZIG_Q2CO
24 ) a, ARMAST_ZIG_EUR b
25 where a.ARMZIG_Q2AN8 = b.ARMZIG_Q2AN8
26 and a.ARMZIG_Q2DOC = b.ARMZIG_Q2DOC
27 and a.ARMZIG_Q2DCT = b.ARMZIG_Q2DCT
28 and a.ARMZIG_Q2CO = b.ARMZIG_Q2CO
29 and b.ENVZIG_ID = 'E';
30
31 DBMS_OUTPUT.put_line(t_flexnum5);
32
33 END;
34 /
DBMS_OUTPUT.put_line(t_flexnum5);
ERROR at line 31:
ORA-06550: line 31, column 7:
PLS-00306: wrong number or types of arguments in call to 'PUT_LINE'
ORA-06550: line 31, column 7:
PL/SQL: Statement ignored

Wrong number of members in a TG. Infoset query vs Segment Builder.

Similar Messages

Maybe you are looking for