Wrong number of open documents

I have Adobe reader 7 as long ago as the system "thinks" there is still one or more open documents while this is not the case. This also makes uninstalling Adobe Reader impossible because the system announces "Close open files and try again." What should I do?

Hello and thank you, but it is not usefull to continue this discussion. My problem was solved by uing Ccleaner to remove Adobe Reader 7 from my computer. After that, it was possible to install Reader 10 normally.
For your information, I did not identify any process running in the bacground and belonging to to Adobe reader. And if it was the case, usually a restart of the computer sole the problem. I had the problem during several monthes! I suspect it was something wrong in the register, but, using regedit, I did not find it. All informations I found were in english and I am not able to understand "computer english" enough. The on line translators produce usually a french it is not possible to understand too. That's one of the reasons I had the problem during several monthes before to be able to solve it.

Similar Messages

Acrobat DC - wrong color when opening document

I've set up color management via Adobe Bridge for Indesign, Photoshop, Illustrator and Acrobat. After updating to Acrobat DC I had to synchronize via bridge again. Now it says "synched".
BUT: When I open a document the colors the colors are not shown correctly. As soon as I click elsewhere (outside Acrobat DC) and then again inside Acrobat DC the colors are shown correctly. Also if I just use the scrollbar the colors turn correct. But just upon opening the document the colors are wrong.
Any ideas?

Hi troypalmerhughes
I would recommend you to start afresh, Use CC cleaner tool to remove Acrobat, and then reinstall it again, Here's the KB document that might help you : https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Please revert back if you face any challenges.
Regards,
Rahul

HT1338 My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

Hi ...
Checked to see how much free space there is on the startup disk lately?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
If disk space is not the issue, booting in Safe Mode deletes system caches that may help.
A Safe Mode boot takes longer then a normal boot so be patient.
Once you see the Desktop, click the Apple menu icon top left corner of the screen.
From the drop down menu click Restart.
See if that makes a difference ...

Cannot open document because Office keeps trying to sign in to Office 365 with the wrong account

Problem: I cannot open Office documents from SharePoint on Office 365 because Office tries to sign in with my Microsoft account instead of my Office 365-account.
History
When we started the project, I did not have an Office 365-account yet for the organization I was working for. To get temporary access to SharePoint a colleague invited me on my Microsoft Account to gain access to SharePoint. This worked fine and I
was able to access SharePoint. A few days later I received my official Office 365 account, so I also got e-mail etc. Because I now have an official Office 365 account, we removed my Microsoft Account from SharePoint. So now I only have access to SharePoint
with my Office 365 account.
The problem is that I can no longer open documents in Office. In the web version everything works fine, but if I want to open a document in for example Word, it says the document cannot be opened. Sometimes it shows a screen which says "Something
went wrong". If I click through to go back to the website, it show me that it tried to login with my Microsoft Account and that this account does not have access to the site. It suggests to sign out and login with a different account, but this leads to
a page that does not exist. I cannot figure out how to make Word use my Office 365 account.
What I have already tried
-Remove all my browser history and temporary files
-Add Office 365 as a connected service in Office. I can sign-in with my Office 365 account and the location is added, but I still cannot open documents.
-Tried a different pc. But because Office syncs al my settings, I got the same problem on all my pc’s.
-Removed all my Windows credentials via the credential manager in the control panel. If I also remove the credentials for my Microsoft Account, Office cannot sign in anymore. At this point, if I try to access SharePoint, it asks me for my credentials
and I have access to the documents. However, if I restore my Microsoft Account in Office again by entering my password, the problem is back.
-As a work around I can add my Office 365 account as a separate Office account. I have access then, but it is really annoying because every time I want to open a document, I have to open Word, switch accounts, close Word and open the document. It is
not capable of automatically selecting the account to use.
Conclusion and question
I have also worked with other Office 365 organizations which I can easily add to the connected services in Office and they work fine. So somehow Office has linked my Microsoft Account to this organization of Office 365 and it refuses to use the correct
account. Does anybody know how to unlink my Microsoft Account from this Office 365 organization so that I can use the correct account?

Try these steps from the source linked below:
Stop connecting to a connected account
You can stop connecting to a connected email account in Outlook Web App by removing the connection.
In Outlook Web App, click Settings >
Options > Account > Connected accounts.
Under Account Name, select the account you want to stop connecting to.
Click Delete to remove the connection.
Click Yes in the dialog box to confirm that you want to stop connecting to the account.
http://office.microsoft.com/en-us/support/connected-accounts-HA102836325.aspx

Office Web Apps Issue - "Sorry, something went wrong" message when opening a document (any MS docx,ppt etc) in IE. With Chrome, it pops (Microsoft Office needs your permission) message and on RUN, it opens the document.

When opening any Microsoft documents ( docx, ppt etc) in SharePoint 2013,
Internet Explorer behavior : "Sorry, something went wrong" An unexpected error has occurred message and then nothing happens.
In Chrome : Pops (Microsoft Office needs your permission) message and on clicking RUN, it opens the document.
In Firefox : the documents opens, after asking which application do you want to use to open it.
The feature (Open Documents in Client Applications by Default) is not activate.
Why the MS documents are not working in IE 10?

Hi,
According to your post, my understanding is that you failed to open Microsoft documents in SharePoint 2013.
I recommend to Run the following PowerShell in OWA Server :
Remove-OfficeWebAppsHost # To Remove any restriction
Or
New-OfficeWebAppsHost -Domain <String> # To allow specific domain Name
In addition, you can allow OAuth via HTTP using the following commands:
$config = (Get-SPSecurityTokenServiceConfig)
$config.AllowOAuthOverHttp = $true
$config.Update()
Here are two similar articles for you to take a look at:
http://blogs.msdn.com/b/fabdulwahab/archive/2013/10/30/office-web-apps-with-sharepoint-2013-issues.aspx
http://stevemannspath.blogspot.in/2013/03/sharepoint-2013-office-web-apps-issue.html
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

Forgive my ignorance but I have never hear of iTunes Document Manager Pro. If you mean Document Manager Pro, i was able to find that. Back to your problem, have you tried opening one of those files in the iOS iWorks apps? Form the quick read that I did about this, .cwk files can be opened by Pages, Numbers or Keynote, depending on what type of document that it is and those files can be read by Document Manager Pro, after properly saving them. I don't see that you can go directly from the .cwk file in Document Manager Pro without converting them first.
I took a very quick look at the app, so I may be a missing something about its capability.

Failed to open rowset, PLS-00306 Wrong Number of arguments in call to....

Hi,
We currently run Crystal Reports v10 with ODBC (CR Oracle ODBC Driver 4.20) to Oracle 9i database (on solaris) and have some reports which gets data (ref cursors) from stored procedures. So far so good and now we are upgrading our oracle database to 10g on Linux server and during my testing these reports give the following error.
Error Description:
Failed to open rowset
Query Engine Error: HY000:[DataDirect][ODBC Oracle driver]ORA-06550:line 1, column 8:
PLS-00306: wrong number or types of arguments in call to 'MY_STORED_PROCEDURE'
ORA-06550: line1, column 35:
PLS-00363: expression 'MY_PARAM_VALUE' cannot be used as an assignment target
ORA-6550: lin1, column8:
PL/SQL: Stateme'
Any help would be greatly appreciated.
Thanks,
-Venkat Gopalan

Discovered on another post that 4.2 is too old. You need to upgrade to a more current ODBC driver that runs on Solaris.
We have a newer one version 5.3 but it's only for windows. Go to Datadirect.com and see if they have one for that OS.
Otherwise you'll have to configure your reports to use the native Oracle driver.
Thank you
Don

PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMI

I am trying to submit the payables open interface import program using BPEL process. BUT I am unable to submit the concurrent program. The invoke function is failing with below message.
[2010/08/25 17:06:22] Faulted while invoking operation "OFAPOPIIMPORT" on provider "OFAPOPIIMPORT".less
-<messages>
-<input>
-<Invoke_1_OFAPOPIIMPORT_InputVariable>
-<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="InputParameters">
-<InputParameters xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/XX_BPEL_FND_REQUEST_SUBMIT_REQ/FND_REQUEST-24SUBMIT_REQUEST/" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/XX_BPEL_FND_REQUEST_SUBMIT_REQ/FND_REQUEST-24SUBMIT_REQUEST/">
<db:APPLICATION>200</db:APPLICATION>
<db:PROGRAM>APXIIMPT</db:PROGRAM>
<db:DESCRIPTION>Test</db:DESCRIPTION>
<db:START_TIME/><db:SUB_REQUEST/>
<db:OperatingUnit>NYSIF</db:OperatingUnit>
<db:Source>DBL</db:Source>
<db:Group/>
<db:BatchName>TESTRAMBPEL1</db:BatchName>
<db:HoldName/>
<db:HoldReason/>
<db:GLDate/>
<db:Purge>N</db:Purge>
<db:TraceSwitch>N</db:TraceSwitch>
<db:DebugSwitch>N</db:DebugSwitch>
<db:SummarizeReport>N</db:SummarizeReport>
<db:CommitBatchSize>1000</db:CommitBatchSize>
<db:UserID>4842</db:UserID>
<db:LoginID>1683090</db:LoginID>
</InputParameters>
</part>
</Invoke_1_OFAPOPIIMPORT_InputVariable>
</input>
-<fault>
-<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="code">
<code>6550
</code>
</part>
-<part name="summary">
<summary>
file:/C:/product/10.1.3.1/OraBPEL_1/bpel/domains/default/tmp/.bpel_APOPIIMPORT_1.0_91d4c6c1050ed25d005bc0d396a9db24.tmp/OFAPOPIIMPORT.wsdl [ OFAPOPIIMPORT_ptt::OFAPOPIIMPORT(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'OFAPOPIIMPORT' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.XX_BPEL_FND_REQUEST_SUBMIT_REQ.FND_REQUEST$SUBMIT_REQUEST API. Cause: java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
[Caused by: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
; nested exception is:
ORABPEL-11811
Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.XX_BPEL_FND_REQUEST_SUBMIT_REQ.FND_REQUEST$SUBMIT_REQUEST API. Cause: java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
[Caused by: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable.
</summary>
</part>
-<part name="detail">
<detail>
Internal Exception: java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Error Code: 6550
</detail>
</part>
</remoteFault>
</fault>
</messages>
[2010/08/25 17:06:22] "{http://schemas.oracle.com/bpel/extension}remoteFault" has been thrown. More...
-<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="code">
<code>6550
</code>
</part>
-<part name="summary">
<summary>
file:/C:/product/10.1.3.1/OraBPEL_1/bpel/domains/default/tmp/.bpel_APOPIIMPORT_1.0_91d4c6c1050ed25d005bc0d396a9db24.tmp/OFAPOPIIMPORT.wsdl [ OFAPOPIIMPORT_ptt::OFAPOPIIMPORT(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'OFAPOPIIMPORT' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.XX_BPEL_FND_REQUEST_SUBMIT_REQ.FND_REQUEST$SUBMIT_REQUEST API. Cause: java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
[Caused by: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
; nested exception is:
ORABPEL-11811
Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.XX_BPEL_FND_REQUEST_SUBMIT_REQ.FND_REQUEST$SUBMIT_REQUEST API. Cause: java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
[Caused by: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable.
</summary>
</part>
-<part name="detail">
<detail>
Internal Exception: java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Error Code: 6550
</detail>
</part>
</remoteFault>
I thought I am providing the values for the required parameters. But still I am unable to submit. Could some one help me on fixing this issue?
Thanks,

That's probably your problem.
Look at http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28351/T430238T430241.htm
Search for "One-time Workaround for Concurrent Programs" in that document.

Pages App on Mac won't open documents created on iPad

My pages app on my mac wouldn't open documents created on my iPad, it said that I needed to down load the newest version which I belive I had. So I put it in the trash hoping I could re install but now I can't open it at all :-(

You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Peter

Linking a WEBI report through hyperlink in a webpage using open document

Hi All,
I have a hyper link in a web page which when clicked should open a WEBI report. I created it using the open document feature.
Once clicking on the link, InfoView login credential page is displayed. After logging in the report runs.
My client does not want the login page to be displayed since most of the users does not remember their password (since SSO is implemented).
He wants to bypass this login page so that most of the users can directly view the reports.
Question:
Is there a way to achieve this i.e without asking for login credentials or by passing this?
Possibilities :
1: To create ID's for all the people (which I think is not a feasible option in my project)
2: Create a guest account with minimum privileges and share the password with all the users.
Note:
1: I use BO XI R 3.1.
2: No SDK is installed to do any programming.
Any suggestion are most welcome.
Thanks in advance
Shreyas

Hi Shreyas,
Manual Easy Way for doing the activity in SAP Business Objects 4.0:
This method is useful if we have a special system account that we want everyone to use.
You will notice that all we do is generate a logon token using the appropriate username, password and CMS variables. Then we append the token onto ivsLogonToken.
Note: The numbers on the url after /BOE/portal represents the timestamp of the last patch or install. You can put whatever you want under the number section and Business Objects will automatically redirect to the appropriate start.do
Step I:
Go to the SAP BusinessObjects\Tomcat6\webapps\BOE\WEB-INF\eclipse\plugins\webpath.InfoView directory and edit custom.jsp
Step II:
You can copy the contents from the custom.jsp that I’ve provided below to your custom.jsp.
Cutom.JSP File
<%@ page import="com.crystaldecisions.sdk.exception.SDKException" %>
<%@ page import="com.crystaldecisions.sdk.framework.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.infostore.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.security.*"%>
<%@ page import="java.net.*"%>
<%@ page import="com.crystaldecisions.enterprise.*"%>
<%@ page import="com.crystaldecisions.sdk.plugin.admin.*"%>
<%@ page import="java.sql.*"%>
<%@ page import="com.businessobjects.webutil.Encoder" %>
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
pageEncoding="ISO-8859-1"%>
<%
//BO Session and redirect to Infoview
IEnterpriseSession enterpriseSession;
/* * Set Enterprise Logon credentials. */
final String BO_CMS_NAME = "bi4server";
final String BO_AUTH_TYPE = "secEnterprise";
final String BO_USERNAME = "Daya";
final String BO_PASSWORD = "admin@123";
ILogonTokenMgr logonTokenMgr;
String defaultToken = "";
* Log onto Enterprise
boolean loggedIn = true;
try {
//Create session token
enterpriseSession = CrystalEnterprise.getSessionMgr().logon(Daya,admin@123, BI4SERVER,Enterprise);
logonTokenMgr = enterpriseSession.getLogonTokenMgr();
defaultToken = logonTokenMgr.createWCAToken("", 20, 1);
//Redirect with token attached to the ivsLogonToken parameter
response.sendRedirect("http://"+BO_CMS_NAME+":8080/BOE/portal/1205291547/InfoView/logon/start.do?ivsLogonToken="+Encoder.encodeURL(defaultToken));
catch (Exception error)
loggedIn = false;
out.println(error);
%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>Insert title here</title>
</head>
<body>
</body>
</html>
Edit the username,Password & BOBJ Server Name'in BOLD Letter
Step III:
Stop tomcat, then delete contents in the SAP BusinessObjects\Tomcat6\work directory.
Then start tomcat again and the work directory will be regenerated with new code.
Step IV:
Trusted Authentication:
Trusted Authentication is a component of Enterprise authentication that integrates with third-party single sign-on solutions, including Java Authentication and Authorization Service (JAAS). Applications
that have established trust with the Central Management Server can use Trusted Authentication to allow users to log on without providing their passwords.
This method is really cool because users don’t even have to know their passwords. Basically with this method you can log into another system and if that system has the appropriate user name, you can pass it to the custom.jsp and then it will log you into BI Launchpad.
In addition, you don’t need to create any java code for the enterprise token setup.
Step V:
In the CMC, go to Authentication, then select Enterprise. Check Trusted Authentication is enabled, then click on New Shared Secret. Finally download the shared secret key and keep it somewhere secure
Step VI:
Copy global.properties from <INSTALLDIR>\SAP BusinessObjects Enterprise XI 4.0\warfiles\webapps\BOE\WEB-INF\config\default into <INSTALLDIR>\SAP BusinessObjects Enterprise XI 4.0\warfiles\webapps\BOE\WEB-INF\config\custom. Then using Notepad or another text editing utility, edit the following properties
sso.enabled=true
trusted.auth.user.retrieval=WEB_SESSION
trusted.auth.user.param=UserName
trusted.auth.shared.secret=<secret code from properties file you created in step 2>
Step VII:
Go to the SAP BusinessObjects\Tomcat6\webapps\BOE\WEB-INF\eclipse\plugins\webpath.InfoView directory and edit custom.jsp
<\!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page language="java" contentType="text/html;charset=utf-8" %>
<%
//custom Java code
request.getSession().setAttribute("MySecret","32efbfbd35efbfbdefbfbd4363efbfbdefbfbd694aefbfbdefbfbd227530efbfbd5742efbfbd13efbfbd2befbfbd1fefbfbdefbfbdefbfbdefbfbd4e49efbfbd41550cefbfbd15703619d8b8efbfbd6cefbfbdefbfbd57efbfbd0defbfbdefbfbdefbfbd0605efbfbd6dc59b2728efbfbd");
request.getSession().setAttribute("UserName", "Daya");
%>
<html>
<head>
<title>Custom Entry Point</title>
<script type="text/javascript">
function goToLogonPage() {
window.location = "logon.jsp";
</script>
</head>
<body>
<a href="javascript:goToLogonPage()">Click this to go to the logon page of BI launch pad</a>
</body>
Edit the username(Daya) variable
Step VIII:
Stop tomcat, then delete contents in the SAP BusinessObjects\Tomcat6\work directory.
Then start tomcat again and the work directory will be regenerated with new code.
Hope this help you as well.
Thanks,
Daya

Access Denied - Failed to Open Document

I've done a few hours of searching for a solution to my problem with no specific answer helping me.
I recently upgraded 63 various reports from Crystal Reports version 8.5 to Crystal Reports 2011 (using a Windows 7 box). I realigned all of the report fields, and ensured all the variables within the report worked as they did before. Basically all 63 worked like old. I deployed these reports to a Windows 2012 R2 server which has Crystal Reports 2011 installed (as well as Crystal Report Runtime for .Net Framework) and 4 out of 63 no longer work. When I try to open them with Crystal Reports 2011 it gives me an error 'Access Denied [line break] Failed to Open Document' In the Event Viewer for Windows it gives me the following details as to what happened.
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             crw32.exe
Application Version:                           14.0.4.738
Application Timestamp:                     4fd6ccca
Fault Module Name:                          crw32.exe
Fault Module Version:                        14.0.4.738
Fault Module Timestamp:                  4fd6ccca
Exception Code:                                  c0000005
Exception Offset:                                000cf0e5
OS Version:                                          6.1.7601.2.1.0.272.7
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
Here are the things I've done to try and troubleshoot/resolve it:
Re-upgrade the original CR 8.5 Report to 2011 and migrate it to server. (Didn't work)
Migrate the original CR 8.5 Report to Windows 2012 Server and try to upgrade it there (Same error on 8.5 report)
Repair/Reinstall Crystal Reports 2011 on Windows 2012 Server via Windows Control Panel->Uninstall Program tool (Didn't Work)
Repair/Reinstall Crystal Reports Runtime for .Net Framework on Windows 2012 Server via Windows Control Panel->Uninstall Program tool (Didn't Work)
Add three System Environment Variables to enable Crystal Reports Error Logging through CRLogger.dll (LOGGING_DIR = C:\CRLOGGING; LOGGING_ENABLED_ASSERT = 1; LOGGING_ENABLED_RUNTIME = 30)
Now..the error logging gives me error numbers, and which line of which .cpp file is encountering a problem, but that really doesn't help me because I don't have access to Crystal Reports Source Code. (Pasted below for those who are really curious).
I've seen Ludek or other SAP staff shut down discussions with some line about 'Report Development is not a ...' but I feel that this isn't related to how the report was developed and instead something in the application not jiving well with something else.
Any help or suggestions would be incredibly well received and appreciated.
Time Stamp
Thread ID
File Name
Line Number
Logged Data
Level
2015-4-24-12-48-43
3820
..\cserrinf.cpp
523
Error 31831 (..\..\src\data\preQEFileIO.cpp, 3578)
1
2015-4-24-12-48-43
3820
..\cserrinf.cpp
523
Error 31831 (..\..\src\data\preQEFileIO.cpp, 3847)
1

Hi Thomas,
Statistically speaking, 4 out of 63 reports isn't bad for a migration. So something in these 4 reports is different from the others. I've had this happen if there are images or an object inserted into the report and the update doesn't know how to handle that object.
The best way to try and find the problem is by process of elimination. Open the reports again in 8.5 and remove a couple of things at a time. Save it then open in 2011 and see if it fails or not. Continue doing that until the report actually opens. The problem could be anything from a formula or printer settings to attachments.
Good luck,
Brian

Open Document Link on PO Approval WF

In the PO Approval Workflow, if you have the proper responsibility, an "open document" link is displayed that, when clicked, takes the user to a screen entitled "Notifications to Releases".
This function is available to our Purchasing Super User responsibility but is not available for the Purchasing Approver responsibility. I'm trying to change that.
Using help, I determined that the form associated with "Notifications to Releases" is POXPOERL. That form is assocated with the following functions and menus:
FORM_NAME     FUNCTION_NAME     MENU_NAME
POXPOERL     PO_POXPOERL     CHV_CHVSSWKB_FUNCTIONS
POXPOERL     PO_POXPOERL     PO_POXSTNOT_FUNCTIONS
POXPOERL     PO_POXPOERL     PO_POXPOVPO_FUNCTIONS
POXPOERL     PO_POXPOERL     PO_PURCHASE_ORDERS_GUI
POXPOERL     PO_POXPOERL     POS_INTERNAL_HP_MENU
POXPOERL     PO_POXPPOERL_VIEW     PO_POXSTNOT_FUNCTIONS
POXPOERL     PO_POXPPOERL_VIEW     PO_REQUESTOR_GUI
POXPOERL     PO_POXPPOERL_VIEW     PO_POXPOERL_FUNCTIONS
POXPOERL     PO_POXPPOERL_VIEW     PO_POXBWVRP_FUNCTIONS
I've tried, under Functional Developer, to add several of these to the menu for Purchasing Approver. When they show up on the menu and I click them, I get a message stating: "You are not setup as a buyer. To access this form you need to be a buyer."
All I want is for people to be able to see and use the "Open Form Command". Am I going about this the wrong way?

I was probably not clear enough in my original question.
We want people who are approvers - but not necessarily buyers - to be able to open the form from the link. I'm not set up as a buyer, but I have the Purchasing Superuser responsibility and I can open the form.
I guess, bottom line... some more information on how to make links to eBiz forms work from WF would be helpful. I've not found much in the Oracle-supplied documentation that we have; I've read what's in the Developer's Guide and the Admin guide. Can anyone suggest a web link or two that might shed more light on the process?

I downloaded the latest version of Pages 5.0 and have been using it for days. Now, when I try to open documents created with this version, I'm advised that I need latest version of Pages to open. What's going on?

First time user. Need help. I downloaded latest version of Pages 5.0 and have been using it. Now, when I try to open documents created by it, I'm advised that I have to downoad Pages 5.0. What's going on?

You have 2 versions of Pages on your Mac.
Pages 5.2.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 110 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
You can add the icon of the missing Pages on your Dock or open Pages from the Apple menu > Recent Items list.
Or you can archive Pages 5 so that it doesn't automatically open.
If you are unhappy about this review/rate Pages 5 in the App Store.
Peter

Unable to open documents because of missing plug ins

I am unable to open documents in CS3 (version 5.04)
I am getting a message:"Missing Plug Ins: Conditional Text.InDesignPlugIn, WorldReady.InDesignPlugin.
The document "xxxxx.indd" uses one or more plug-ins which are not currently available on your system. Do you want to open anyway?"
If I click on OK I get another window, stating "Cannot Open File", a list of all kind of missing Plugins and the message "Cannot open "xxxxx.indd". Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign.
I don't want to switch to CS4 and as far as I know version 5.04 of CS3 is the latest.
Any ideas of what I could do to get the latest PlugINs or anything else that would help?
Thank you!
Anne

Probably, but it's 100% not necessary when going from CS4 to CS3. It might be a case of 'half read, then half-understood'.
As this is a really frequent question and there are still no sticky posts: anyone up for a "feature request" that makes InDesign check the version number before opening? (Of course that wouldn't work backwards to CS3. Still, it'd avoid these kind of posts when CS6 comes out. Note: not CS5, because that would have no problems opening CS4, but CS4 would have problems with Cs5! Oh, for planning ahead ... )

SSRS Calling a Stored Procedure error : PLS-00306: wrong number or types of arg...

Hi,
My Problem is when im adding dataset with stored procedure, im getting this error.
I Can access database,
Could not create a list of fields for the query. Verify that you can connect to the data source and that your query syntax is correct.
ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'PROCEDURE_NAME' ORA-06550: line 1, column 7: PL/SQL:
Statement ignored
stored procedure is simple select :
CREATE OR REPLACE PROCEDURE [PROCEDURE_NAME](L_CURSOR out SYS_REFCURSOR)
is
Begin
open L_CURSOR for
SELECT [columnname] FROM
[tablename]
End;
Configuration Details:
DB: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64biOracle Developer Tools for Visual Studio Copyright (c) 2005,2014 SQL Server Data Tools Type: Oracle , Data Provider : .Net Framework Data Provider For Oracle

The answer is of inside question. It is about provider. Change my provider ODTwithODAC for 10g (my database version). And problem resolved.
Thank you for your helps,
Regards,
Arda

Wrong number of open documents

Similar Messages

Maybe you are looking for