Wrong Outgoing Pop Server User name when sending message

When I send a message mail tells me message is rejected by server. Looking at the user it is incorrect.
If I restart mail, it asks me to confirm my passward and shows the correct outgoing server and user information. When I attempt to send, it says it rejects the user, (it's different from original login)
Using Mail's connection doctor, it is able to connect correctly to the correct outgoing server
I've tried deleting outgoing servers and re-entering, trying different methods, such as adding several outgoing servers, deleting all servers, using server without password authent.
Everything I try seems to revert to Mail trying to send with an incorrect user.
Also rebooted, didn't help.
What should I try next? Thanks
Bill

Well, fortunately, after some digging on yahoos website, I found the solution to my problem.
My web / mail server is through Yahoo. The stated POP / SMTP Server settings have changed!
Below is posted on Yahoos site: (after login)
Your POP/SMTP Settings:
Incoming mail server (POP3): pop.bizmail.yahoo.com
Use SSL, port: 995
Outgoing mail server (SMTP): smtp.bizmail.yahoo.com
Use SSL, port: 465, use authentication
Account name/user name: [email protected]
Email address: [email protected]
Password: Your Business Email password
for instance, my old settings for email address [email protected]:
Incoming / Outgoing server address is still the same.
old login: info%sydewayz.com
new login: [email protected]
from "%" to "@"
And most important, now must use "SSL" - server Port "465" for outgoing mail
and of course password authentication.
Hope this info helps!
Yakpasua Zazaboi
[email protected]

Similar Messages

MacBooks can't resolve printer name when sending job to windows 2008 R2 print server.

So I am work at company in a windows server 2008 r2 and we have a windows 2008 r2 printer server. Our macbook pros are not on the domain so every time we print to the server we have to type in our credentials.
MacBooks can't resolve printer name when sending job to windows 2008 R2 print server while on wifi but works when hard wired. Any thoughts? The error message I receive is "invalid printer name". I've tried adding the printer through the advanced tab in the print and scan tab of system preferences. I add it buy smb://servername/printername.
When I tried to print on the wifi at my office I get "invalid printer name" in the print job status que.
We can just do direct printing but I would like to know if anyone has had this issue before and if you could point me in the right direction. Thanks!

I assume you aare using exchange when configuring the email notifications? What I would do is just use a normal IMAP & SMTP account such as Outlook.com or if you use a POP connector for exchange, one of those accounts' SMTP settings.
For example, I have a POP connector installed and my emails are hosted at 1and1. What I would do here is put my 1and1 SMTP settings in and use these, instead of using Exchange.
Let me know if this is possible.
Ed

Windows 7 Desktop synchronisation - Windows cannot access \\server\users\name\desktop

Hi there
My client has a laptop which won’t load the desktop when disconnected from the network. When you log on (while disconnected) you get the error
“Windows cannot access \\server\users\name\desktop”
Works as expected while connected to the network.
The server is a Windows Small Business Server 2003 with active directory etc. and roaming profiles turned on. This issue does not occur on other workstations/laptops.
When I check the Users folder on the local system drive there is not a desktop folder. I assume this is the issue although I’m not sure how you would force windows to create one or why one hasn’t been created?
This is a brand new laptop so my initial reaction was to reset the laptop to factory state and then add the laptop back in to the domain. After this process the issue was still present!
I guess the only thing I should mention is that this was shipped as a Home Premium laptop and was then upgraded to Professional using an upgrade key.
I have checked Control Panel, System & Security, System, Advanced, User Profiles and the account shows as Local with Roaming Profiles greyed out.
Any ideas?
Martyn Fewtrell
[email protected]
Martyn Fewtrell TNC (IT Solutions) Ltd Email: [email protected] Web: http://www.tncit.co.uk

Hi,
I am just writing to check the status of this thread. Was the information provided in previous
reply helpful to you? Do you have any further questions or concerns? Please feel free to let us know.
Regards,
Alex Zhao
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Alex Zhao
TechNet Community Support

My iMessage will send to other iMessage users, but when they message me back, their messages will only send to me as a text message! I have an iPhone and iPad, and they've been synched for a year now, but I just got a new iPhone 5c . What to do?

Ok my iMessage will send to other iMessage users, but when they message me back, they can only send texts. I have an iPad and when I send iMessages to
Them from there, they receive them, but can still only text me back to my phone. They also sometimes receive messages from my iCloud email instead of my phone number.... When that happens, iMessage works. It's really annoying! Can anyone help.
I got the iPhone 5c around Christmas and it's worked fine until yesterday!!! This has been going on 2 days now. I have reset iMessage, and the network settings. I've restarted my phone and iPad and they're both completely cleared of messages. I don't know what else to do.

There are a lot of posts in the forums today with people having problems with iMessage. There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
I would just wait it out - I'm sure it will be sorted out soon.

Certain characters not appearing in the "full name" when sending e-mail

I have certain characters in my full name of one of my e-mail aliases in iCloud. However, those characters are simply absent from the name shown as sender name when sending mail from Mail app in OS X. For me the problematic characters are C5 A1 and C4 8D (UTF-8 codes).

Yes, š and č are those. Sorry, I wasn't sure if they will work here. I have my full name containing the š and č in the "Full Name" field of the e-mail alias settings on web interface to the iCloud Mail. But in Mail on OS X my name in the "From" field appears without those two characters (other characters are OK) when I select this alias. Also, those two characters are invisible at the recipient's side. And yes, if I sent a copy of such a mail to myself the š and č are missing again in the "From" field.
However, I have the same full name with š and č for my main e-mail address (iCloud account name). Using this main e-mail address š and č appear everywhere!
Message was edited by: mikkec

Error when sending message: 500 Internal Server Error

Hi
IE is not accepting any messages,
when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
following things what i have noticed.
1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the IE admin) URL is "http://<host>:8000/sap/xi/engine?type=entry"
2. SICF all the XI serivess are up and running, i am able to test these service.
3. The http port is active ( SMICM )
Pls note the error is 500 Internal Server Error
regards
Nisar

I think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
1 Check Table Space is enough. ---i had installed server recently & very few interface running.
2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
Try restart the java stack(XI Server) and follwing services.
com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
regards
Nisar

HT4528 How do I reset my iCloud user name when my email used before is no longer active? Also my iCloud was never verified with my old email on my iPad is I am stuck.

How do I reset my iCloud user name when my email used before is no longer active? Also my iCloud was never verified with my old email on my iPad is I am stuck.

Hey Dorekelly,
Thanks for the question. It sounds like you wish to change the email address associated with your Apple ID and iCloud account. The following resource should guide you through this process:
Change your Apple ID
http://support.apple.com/kb/HT5621
Afterwards, be sure to read about updating the features and services that you use with Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Thanks,
Matt M.

Itunes is not authenticating my User Name when I try to remove Parental Control

Why is iTunes store unable to "Authenticate" my User Name when I try to unlock the Parental Control? This started after I downloaded the latest version 10.5

See Here > http://support.apple.com/kb/HT1808
This will not necessarily work if the Device has been Modified.

Documents that are park in FBV0 do not update with the new user name when

Hi,
I need to find out why documents that are park in FBV0 do not update with the new user name when any changes are made. Also when we park using MIR7 and make changes to the documents at a later time the document updates with the new users name.
Requesting you to please suggest what could be the reason.
Earliest reply will be highly appreciated,
With regards,
Rj

Hi,
I have checked this in system. I posted one Parked invoice using T.code FV60 and there i appeared my name because i created. But after some time one of my collegue changed the reference and text field with his login i.d. But still in the invoice it is showing as my name whereas if we go to the environmnet, there in the changes we can see what are the changes done and it is appearing my collegues user i.d. But in the main invoice it is still appearing my name.
Regards,
Rj.

Could anybody suggest how I must fix the outgoing mail server-SMTP problem, when it indicates to be offline? I couldn't manage to turn it on. Thank you!

Hello everybody!
Could anybody suggest how I must fix the outgoing mail server-SMTP problem, when it indicates to be offline?
I tried everythind and still couldn't manage to turn it on.
Thank you!

Hopefully I solved it....

Test message from RWB: Error when sending message: 401 Unauthorized

Hi Experts,
While I am sending test message from RWB, I am getting following error:
Error when sending message: 401 Unauthorized
I am using correct userid/password as I am working with Repository/directory. Also in one of the test scenario files are picking up from folder but never got processed because of similar issue (HTTP_RESPONSE_CODE_NOT_OK) and SERVICE NOT AVAILABLE.
I am having SAP_ALL authorizations and few days back everything was fine.
I think something wrong with configuration in XI but I am unable to pin point.
Please help.
Regards,
Gourav

Yes,
but
Role of Business System : Integration system
Corresponding Integ. Server : http://<XI server>:<http port>/sap/xi/engine?type=entry
How can I change it to Application system
and RUNTIME->IS_URL = http://<XI server>:<http port>/sap/xi/engine?type=entry
Regards,
Gourav

RWB:Error when sending message: 404 Not Found

Dear all,
"i am getting error: Error when sending message: 404 Not Found"
while testing from rwb > Component Monitoring > Non-Central Adapter Engines > Adapter Engine AIPID > test message >
with send message to = http://pid:50000/sap/xi/engine?type=entry - pi server url
sld buss system > pipeline url http://pid:50000/sap/xi/engine?type=entry (same)
and my id comm channel > target host > bid.xxx.com with service no
(adapter type: xi
adapter engine: Integration server
address type: url address
target host: bid
service no: 8000
path: /sap/xi/engine?type=entry
i am working in nw2004s system)
while testing cache connectivity test from rwb > Component Monitoring
i got error:http://docs.google.com/Doc?id=dcdrq9jt_0g6j35p
green: Integration Repository
green: Integration Directory
green: Integration Server - JAVA
red:Adapter Engine af.axd.aipid
yello:Integration Server - ABAP
Adapter Engine af.axd.aipid > Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.aipid, string], target element type: SAP_BusinessSystem)
[Data Evaluation]: GlobalError
though if i try to send message from rwb...> with send message to field with : directly to bi rather than pipeline url through bi than message send successfully but not getting into component monitoring.
what should i do?
best regards,
dushyant.
refer this forum: is rwb's send message to field = sld>buss system>Pipeline URL?
and
SXI_CACHE
@8O@ Error during last attempt to refresh cache
LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM
Smq2 = 0
Sm58 = 0

Hi,
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Cheers
Manish

False "Invalid User Name or PAssword" message

Trying to restart my iMac with another user logged in I get a dialog telling me so and that I therefore need to enter an admin user name and password. When I do so I get "Invalid User name and Password" message even though the user name and password are correct admin's. I even changed them and the same thing happens. What's up?
Thanks for any help.

You may have the 'Loss of admin privileges syndrome'. The warning may not mean . the password is invalid but that it is not for what is now an admin. I and many others have had this from Leopard.
Try this, even if you have not enabled root do so now only to disable it after the exercise.
Insert the install DVD in any user. Restart holding down the 'c' key. Wait whilst the machine boots from the DVD. START (only) the install. When you have selected a language, do not proceed to install but pick fro one of the top menus the option in (utilities?) to re set password.
Choose to re set the root password. Think of a good long password with upper/ lower case letters/numbers/ and Shift+top line normal kb characters such as $.
Note said PW. Now choose from the top menus to reboot and reboot from HD. Remove DVD and login to root using PW just set.
In root go into System Preferences, choose accounts pane. Unlock the lock icon using if need be the root id and root PW. Highlight the 'errant' admin. Tick the little square box marked 'allow to administer computer, if it is not already ticked. If you have more than one admin (a good idea to have a reserve, admins can go wrong) repeat the 'tick' process with each.
Log out of root and into a normal admin. Go to directory services and you should find in the top menu and option to disable root. You did just enable it. Disable it.
My recived wisdom is it is better to have a root that has been enabled>> passworded>> disabled, than have a default of a disabled unpassworded root. It is worst to have a continuously enabled.
You now have an admin enabled to admin. If you still have a problem it may well be an invalid password. So come back.
This problem and the one of an (apparent) comnplete los of the admin account are plagueing these forums. If you hav not already done so upgrade to 10.5.2. Make sure you repair permissions before and after aqnd remove haxies first etc.

Error when sending message: 404 not found

Hi,
New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
"Error when sending message : 404 not found"
Also tried in Adapter Engine and the result same.
Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
Any idea's?? what might be the issue????
Thanks,
Venu.

Hi Venu,
"404 is a not found error", plz make a check of your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
Select XI Adapter Framework.
Thirteen associations have to be registered.
(Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
If you can't find all the associations, then you will have to create the associations manually.
This is a very good blog which answers ur question:
check this weblog
https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
Regards,
Vinod.

Error when sending message: 500 Timeout

while sendin a message in the http to rfc scenario, im gettin this error message "Error when sending message: 500 Timeout".
can any1 throw some light on this.

Hi venu,
you need to go to RZ10 and there select the profile instance and go with the extended maintance option in the change mode.
there are two ways you can change it:
1. check out note: 824554
TCODE - rz10
icm/server_port_0 = PROT=HTTP,PORT=8010,TIMEOUT=800,PROCTIMEOUT=800
(for 800 seconds)
8010 is my HTTP port so you have to change it:)
2. SXMB_ADM -> configure integration server -> change specific identifiers
runtime parameter:
Parameter HTTP_TIMEOUT
Meaning
Specifies the timeout for http connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
Personally I only changed the one from the instance profile but the second one should work too
My suggestion is change only PROCTIMEOUT to 600 or 900 but dont change TIMEOUT. Imp thing is u need to restart the XI, then onlychanges will take place.
If these dosent work out go for changing TIMEOUT also. Just set the value for the instance and dont maintain the HTTP_Timeout in the sxmb_adm
Let me know what u have done , if it works
Thanks,
srini

Wrong Outgoing Pop Server User name when sending message

Similar Messages

Maybe you are looking for